Small Hole Boring Bars For Profiling
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (24)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(24)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(24)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(24)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(24)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(24)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(24)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(24)
- M Stainless Steel (24)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(24)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(24)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(24)
- K Cast Iron (24)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(24)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(24)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(24)
- N Non-Ferrous Materials (24)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(24)
- N3High-Silicon Aluminum Alloys Si >12.2%(24)
- N1Wrought Aluminum (24)
Select All Star
- US (5)
Applications
Applications
Back Boring (25)
Multiple Direction Cutting (27)
TRN Boring (27)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 67.5 (5)
- 90.0 (6)
- 92.0 (2)
- 95.0 (14)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (24)
to
Over All Length [L]
Over All Length [L]
- 4.0 in(10)
- 4.5 in(2)
- 5.0 in(2)
- 6.0 in(9)
- 8.0 in(2)
- 10.0 in(1)
to
Over All Length [L]
Over All Length [L]
- 101.6 mm(10)
- 114.3 mm(2)
- 127.0 mm(2)
- 152.4 mm(9)
- 203.2 mm(2)
- 254.0 mm(1)
to
Corner Radius
Corner Radius
- 0.007 in(24)
- 0.015 in(24)
to
Corner Radius
Corner Radius
- 0.175 mm(24)
- 0.375 mm(24)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- CG5 (24)
- CG6 (13)
- CM1 (24)
Hand Of Tool
Hand Of Tool
- L (5)
- R (22)
Wiper Insert
Wiper Insert
- N (24)
F Dimension
F Dimension
- 4.27 mm(1)
- 5.59 mm(7)
- 5.99 mm(1)
- 6.38 mm(4)
- 6.6 mm(2)
- 7.01 mm(1)
- 7.92 mm(4)
- 8.59 mm(2)
- 9.5 mm(4)
- 11.1 mm(1)
to
F Dimension
F Dimension
- 0.168 in(1)
- 0.22 in(7)
- 0.236 in(1)
- 0.251 in(4)
- 0.26 in(2)
- 0.276 in(1)
- 0.312 in(4)
- 0.338 in(2)
- 0.374 in(4)
- 0.437 in(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 8.61 mm(1)
- 9.14 mm(7)
- 10.16 mm(2)
- 10.74 mm(4)
- 11.38 mm(1)
- 13.08 mm(4)
- 13.72 mm(2)
- 15.88 mm(1)
- 16.0 mm(2)
- 16.26 mm(2)
- 19.43 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.339 in(1)
- 0.36 in(7)
- 0.4 in(2)
- 0.423 in(4)
- 0.448 in(1)
- 0.515 in(4)
- 0.54 in(1)
- 0.625 in(1)
- 0.63 in(2)
- 0.64 in(2)
- 0.765 in(1)
- 5.4 in(1)
to
Cutting Direction
Cutting Direction
- B (14)
- E (11)
- S (2)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (1)
- NEUTRAL (ZERO) (26)
Maximum Bore Depth
Maximum Bore Depth
- 0.9 in(2)
- 1.0 in(5)
- 1.25 in(2)
- 1.416 in(1)
- 1.5 in(7)
- 1.875 in(2)
- 1.89 in(1)
- 2.0 in(2)
- 2.25 in(2)
- 3.0 in(2)
- 3.75 in(1)
to
Maximum Bore Depth
Maximum Bore Depth
- 22.86 mm(2)
- 25.39 mm(1)
- 25.4 mm(4)
- 31.75 mm(2)
- 36.0 mm(1)
- 38.04 mm(1)
- 38.08 mm(1)
- 38.1 mm(5)
- 47.622 mm(2)
- 48.0 mm(1)
- 50.8 mm(2)
- 57.12 mm(2)
- 76.2 mm(2)
- 95.22 mm(1)
to
Boring Bar Material
Boring Bar Material
- C (12)
- S (13)
Front-End
Clamp Style
Clamp Style
- S (22)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.09 in(6)
- 0.091 in(4)
- 0.098 in(1)
- 0.116 in(1)
- 0.119 in(2)
- 0.12 in(4)
- 0.121 in(3)
- 0.13 in(2)
- 0.146 in(1)
- 0.147 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 2.27 mm(2)
- 2.28 mm(1)
- 2.29 mm(3)
- 2.31 mm(3)
- 2.32 mm(1)
- 2.49 mm(1)
- 2.94 mm(1)
- 3.02 mm(2)
- 3.04 mm(2)
- 3.05 mm(2)
- 3.07 mm(3)
- 3.3 mm(2)
- 3.7 mm(1)
- 3.73 mm(1)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- H W (24)
Back-End
Back-End Diameter
Back-End Diameter
- 6.0 mm(1)
- 6.34 mm(1)
- 6.35 mm(2)
- 7.937 mm(2)
- 8.0 mm(1)
- 9.52 mm(3)
- 12.0 mm(2)
- 12.7 mm(7)
- 15.87 mm(6)
- 19.045 mm(1)
- 19.05 mm(1)
to
No filters matching ""
