Fixação-M
Filtros
Filtros
Exibir filtros em
MétricoPolegada
Workpiece Material
Workpiece Material
- P Steel (20)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(20)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(20)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(20)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(20)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(20)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(20)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(20)
- M Stainless Steel (20)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(20)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(20)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(20)
- K Cast Iron (20)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(20)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(20)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(20)
- N Non-Ferrous Materials (20)
- N1Wrought Aluminum (20)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(20)
- N3High-Silicon Aluminum Alloys Si >12.2%(20)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (20)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (20)
- N6Carbon, Graphite Composites, CFRP (20)
- N7MMC's (20)
- S High-Temp Alloys (20)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(20)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(20)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(20)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(20)
- H Hardened Materials (20)
- H1Hardened Materials 44-48 HRC(20)
- H2Hardened Materials 48-55 HRC(20)
- H3Hardened Materials 56-60 HRC(20)
- H4Hardened Materials >60 HRC(20)
Applications
Applications
Facing (20)
Multiple Direction Cutting (20)
Profiling (20)
TRN Boring (20)
Turning (20)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (20)
- Lightly Interrupted Cut (20)
- Smooth Cut (20)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 93.0 (8)
- 95.0 (12)
a
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (20)
- 2.0 (16)
- 3.0 (4)
- 4.0 (16)
- 6.0 (4)
- 8.0 (8)
a
Over All Length [L]
Over All Length [L]
- 2.7559 in(4)
- 3.5433 in(4)
- 3.937 in(6)
- 4.3307 in(6)
a
Over All Length [L]
Over All Length [L]
- 70.0 mm(4)
- 90.0 mm(4)
- 100.0 mm(6)
- 110.0 mm(6)
a
Corner Radius
Corner Radius
- 0.004 in(20)
- 0.008 in(20)
- 0.016 in(20)
- 0.024 in(4)
- 0.031 in(20)
- 0.047 in(20)
- 0.063 in(20)
a
Corner Radius
Corner Radius
- 0.1 mm(20)
- 0.2 mm(20)
- 0.4 mm(20)
- 0.6 mm(4)
- 0.8 mm(20)
- 1.2 mm(20)
- 1.6 mm(20)
a
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (16)
- CW5025 (12)
- K060 (8)
- K313 (20)
- K68 (16)
- KB1340 (8)
- KB1345 (16)
- KB1610 (20)
- KB1630 (16)
- KB5610 (16)
- KB5630 (16)
- KBH10 (20)
- KBH10B (20)
- KBH20 (20)
- KBH20B (20)
- KC5010 (20)
- KC5025 (20)
- KC5410 (20)
- KC730 (20)
- KC850 (20)
- KCK05 (20)
- KCK05B (12)
- KCK15 (20)
- KCK15B (20)
- KCK20 (20)
- KCK20B (20)
- KCM15 (20)
- KCM15B (20)
- KCM25 (20)
- KCM25B (20)
- KCM35 (20)
- KCM35B (12)
- KCP05 (20)
- KCP05B (20)
- KCP10 (20)
- KCP10B (20)
- KCP25 (20)
- KCP25B (20)
- KCP25C (20)
- KCP30 (20)
- KCP30B (20)
- KCP40 (20)
- KCP40B (20)
- KCPK05 (20)
- KCS10 (8)
- KCS10B (20)
- KCU10 (20)
- KCU10B (20)
- KCU25 (20)
- KCU25B (20)
- KD1400 (16)
- KD1405 (16)
- KD1425 (20)
- KS15 (8)
- KT315 (20)
- KT325 (8)
- KTP10 (20)
- KTP25S (20)
- KY1540 (8)
- KY3500 (20)
- KY4300 (16)
- KY4400 (20)
- KYHK15B (20)
- KYK10 (16)
- KYK25 (20)
- KYS25 (8)
- KYS30 (20)
- PB100 (8)
- SP4019 (8)
- THM (8)
- THM-X (8)
- THMF-X (8)
- TN10P (20)
- TN10U (20)
- TN15M (20)
- TN15U (16)
- TN2000 (12)
- TN20K (20)
- TN20P (20)
- TN30M (20)
- TN30P (12)
- TN4000 (12)
- TN6010 (8)
- TTS (8)
- WBH10P (16)
- WBH10U (8)
- WBH20P (20)
- WBH30P (16)
- WBK45U (8)
- WDN00U (16)
- WDN25U (20)
- WK05CT (20)
- WK15CT (12)
- WK20CT (20)
- WM15CT (20)
- WM25CT (20)
- WM35CT (12)
- WP05CT (12)
- WP15CT (20)
- WP25CT (20)
- WP35CT (20)
- WS10PT (20)
- WS25PT (20)
- WU10HT (20)
- WU10PT (12)
- WU25PT (12)
- X00580 (8)
- X00581 (8)
- X00582 (8)
- X00583 (8)
- X00584 (8)
- X00585 (8)
- X00586 (8)
- X00591 (8)
- X00592 (8)
- X00593 (8)
- X00594 (8)
- X00596 (8)
- X00597 (8)
- X00599 (8)
Hand Of Tool
Hand Of Tool
- L (10)
- R (10)
Wiper Insert
Wiper Insert
- N (20)
- Y (20)
F Dimension
F Dimension
- 17.0 mm(10)
- 22.0 mm(10)
a
F Dimension
F Dimension
- 0.6693 in(10)
- 0.8661 in(10)
a
Minimum Bore Diameter
Minimum Bore Diameter
- 1.2598 in(10)
- 1.5748 in(10)
a
Minimum Bore Diameter
Minimum Bore Diameter
- 32.0 mm(10)
- 40.0 mm(10)
a
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 32.0 mm(10)
- 40.0 mm(10)
a
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.2598 in(10)
- 1.5748 in(10)
a
Cutting Direction
Cutting Direction
- B (12)
- E (8)
Maximum Bore Depth
Maximum Bore Depth
- 2.1689 in(4)
- 2.9543 in(6)
- 2.9929 in(4)
- 3.7803 in(6)
a
Maximum Bore Depth
Maximum Bore Depth
- 55.09 mm(4)
- 75.04 mm(6)
- 76.02 mm(4)
- 96.02 mm(6)
a
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (8)
- D-DIAMOND/RHOMBIC 55 (8)
- W-TRIGON 80 (4)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (20)
- B L (20)
- C A (20)
- C N (20)
- D P (20)
- H T (20)
- H W (20)
No filters matching ""
