KM4X63™ • HPC • Unidades de corte com refrigerante de alta pressão
Filtros
Filtros
Exibir filtros em
MétricoPolegada
Workpiece Material
Workpiece Material
- P Steel (12)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(12)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(12)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(12)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(12)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(12)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(12)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(12)
- M Stainless Steel (12)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(12)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(12)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(12)
- K Cast Iron (12)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(12)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(12)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(12)
- N Non-Ferrous Materials (12)
- N1Wrought Aluminum (12)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(12)
- N3High-Silicon Aluminum Alloys Si >12.2%(6)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (12)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (12)
- N6Carbon, Graphite Composites, CFRP (12)
- N7MMC's (12)
- S High-Temp Alloys (12)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(12)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(12)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(12)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(12)
- H Hardened Materials (12)
- H1Hardened Materials 44-48 HRC(12)
- H2Hardened Materials 48-55 HRC(12)
- H3Hardened Materials 56-60 HRC(12)
- H4Hardened Materials >60 HRC(11)
Applications
Applications
Facing (12)
ID Facing (8)
Multiple Direction Cutting (12)
TRN Boring (12)
Turning (12)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (12)
- Lightly Interrupted Cut (12)
- Smooth Cut (12)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 0.0 (2)
- 48.0 (1)
- 49.683 (2)
- 50.0 (2)
- 72.5 (1)
- 95.0 (4)
a
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (9)
- 2.0 (11)
- 4.0 (9)
- 8.0 (6)
a
Over All Length [L]
Over All Length [L]
- 2.756 in(4)
- 4.528 in(8)
a
Over All Length [L]
Over All Length [L]
- 70.0 mm(4)
- 115.0 mm(8)
a
Corner Radius
Corner Radius
- 0.002 in(2)
- 0.004 in(9)
- 0.008 in(7)
- 0.014 in(2)
- 0.016 in(11)
- 0.031 in(11)
- 0.047 in(11)
- 0.063 in(8)
- 0.094 in(2)
- 0.236 in(1)
a
Corner Radius
Corner Radius
- 0.05 mm(2)
- 0.1 mm(9)
- 0.2 mm(7)
- 0.35 mm(2)
- 0.4 mm(11)
- 0.8 mm(11)
- 1.2 mm(11)
- 1.6 mm(8)
- 2.375 mm(2)
- 2.4 mm(2)
- 6.0 mm(1)
a
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (8)
- CW5025 (8)
- K060 (4)
- K313 (12)
- K68 (10)
- KB1340 (4)
- KB1345 (5)
- KB1610 (4)
- KB1630 (5)
- KB5610 (4)
- KB5630 (6)
- KBH10 (8)
- KBH10B (8)
- KBH20 (9)
- KBH20B (9)
- KC5010 (12)
- KC5025 (12)
- KC5410 (12)
- KC730 (10)
- KC850 (12)
- KCK05 (11)
- KCK05B (6)
- KCK15 (12)
- KCK15B (12)
- KCK20 (12)
- KCK20B (12)
- KCM15 (11)
- KCM15B (11)
- KCM25 (12)
- KCM25B (12)
- KCM35 (11)
- KCM35B (8)
- KCP05 (8)
- KCP05B (8)
- KCP10 (11)
- KCP10B (12)
- KCP15 (2)
- KCP25 (12)
- KCP25B (12)
- KCP25C (12)
- KCP30 (12)
- KCP30B (7)
- KCP40 (8)
- KCP40B (10)
- KCPK05 (9)
- KCS10 (8)
- KCS10B (12)
- KCU10 (12)
- KCU10B (12)
- KCU25 (12)
- KCU25B (12)
- KD1400 (6)
- KD1405 (6)
- KD1425 (6)
- KS15 (4)
- KT315 (9)
- KT325 (6)
- KTP10 (8)
- KTP25S (8)
- KY1540 (4)
- KY1615 (1)
- KY3500 (8)
- KY4300 (6)
- KY4400 (6)
- KYHK15B (8)
- KYK10 (4)
- KYK25 (6)
- KYS25 (4)
- KYS30 (4)
- PB100 (4)
- PB250 (1)
- SP4019 (4)
- THM (8)
- THM-X (7)
- THMF-X (4)
- TN10P (10)
- TN10U (9)
- TN15M (8)
- TN15U (6)
- TN2000 (9)
- TN20K (11)
- TN20P (11)
- TN30M (8)
- TN30P (8)
- TN4000 (8)
- TN6010 (6)
- TTS (4)
- WBH10P (6)
- WBH10U (4)
- WBH20P (7)
- WBH30P (6)
- WBK45U (1)
- WDN00U (4)
- WDN25U (6)
- WK05CT (8)
- WK15CT (9)
- WK20CT (12)
- WM15CT (10)
- WM25CT (11)
- WM35CT (8)
- WP05CT (4)
- WP15CT (12)
- WP25CT (12)
- WP35CT (11)
- WS10PT (9)
- WS25PT (8)
- WU05PT (1)
- WU10HT (12)
- WU10PT (9)
- WU25PT (9)
- X00580 (4)
- X00581 (4)
- X00582 (4)
- X00583 (4)
- X00584 (4)
- X00585 (4)
- X00586 (4)
- X00591 (4)
- X00592 (4)
- X00593 (4)
- X00594 (4)
- X00596 (4)
- X00597 (4)
- X00599 (4)
Wiper Insert
Wiper Insert
- N (12)
- Y (2)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 80.0 mm(4)
- 100.0 mm(8)
a
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 3.15 in(4)
- 3.9 in(1)
- 3.937 in(7)
a
Maximum Bore Depth
Maximum Bore Depth
- 2.756 in(4)
- 4.528 in(8)
a
Maximum Bore Depth
Maximum Bore Depth
- 70.0 mm(4)
- 115.0 mm(8)
a
frontEnd
Clamp Style
Clamp Style
- D (1)
- P (7)
- S (4)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (7)
- D-DIAMOND/RHOMBIC 55 (2)
- R-ROUND (1)
- V-DIAMOND/RHOMBIC 35 (2)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (7)
- B L (9)
- C A (9)
- C N (8)
- D P (8)
- H T (9)
- H W (12)
No filters matching ""
