Bem-vindo!
Confirme suas preferências
Atualizar preferências

Sugestões de produtos

Product Family suggestions

WIDIA ao seu serviço

Apoio a cliente

Encontre informações contato de centros de suporte ao cliente, em todo o mundo.

Pedido rápido
Itens adicionado com sucesso ao carrinho
Ver o carrinho

WGC Cut-Off Blades and Holders

Selecionar filtros
Filtros
Filtros
Exibir filtros em
Métrico
Polegada
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (13)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (13)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (13)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (13)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (13)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (13)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (13)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (13)
  • M Stainless Steel (13)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (13)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (13)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (13)
  • K Cast Iron (13)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (13)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (13)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (13)
  • N Non-Ferrous Materials (13)
    • N1
      Wrought Aluminum (13)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (13)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (13)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (13)
    • N6
      Carbon, Graphite Composites, CFRP (13)
  • S High-Temp Alloys (13)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (13)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (13)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (13)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (13)
  • H Hardened Materials (7)
    • H1
      Hardened Materials 44-48 HRC (7)
    • H2
      Hardened Materials 48-55 HRC (7)
Select All Star
  • CN (3)
  • DE (8)
  • GB (5)
  • IN (1)
  • SG (8)
  • US (10)
Applications
Applications
  • Cut-Off Cut-Off (15)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (11)
  • Lightly Interrupted Cut (11)
  • Smooth Cut (11)
  • Varying Depth of Cut (11)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (15)
Tool Cutting Edge Angle Min a Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Cutoff Support Blade A1-A3 (15)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (13)
Cutting Edges Per Insert Min a Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 3.386 in (1)
  • 3.553 in (3)
  • 3.938 in (1)
  • 4.331 in (2)
  • 4.341 in (5)
  • 4.921 in (1)
  • 5.915 in (6)
  • 6.299 in (1)
  • 10.236 in (1)
Over All Length [L] Min a Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 86.0 mm (1)
  • 90.25 mm (3)
  • 100.0 mm (1)
  • 110.0 mm (2)
  • 110.25 mm (5)
  • 125.0 mm (1)
  • 150.25 mm (6)
  • 160.0 mm (1)
  • 260.0 mm (1)
Over All Length [L] Min a Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.003 in (1)
  • 0.004 in (5)
  • 0.006 in (5)
  • 0.008 in (9)
  • 0.012 in (2)
  • 0.014 in (3)
  • 0.016 in (8)
  • 0.031 in (6)
  • 0.039 in (3)
  • 0.047 in (2)
  • 0.06 in (2)
  • 0.063 in (2)
  • 0.079 in (2)
  • 0.094 in (2)
  • 0.098 in (1)
  • 0.119 in (1)
  • 0.125 in (1)
  • 0.156 in (2)
  • 0.157 in (2)
Corner Radius Min a Corner Radius Max
Corner Radius
Corner Radius
  • 0.076 mm (1)
  • 0.1 mm (5)
  • 0.151 mm (5)
  • 0.2 mm (9)
  • 0.301 mm (2)
  • 0.325 mm (3)
  • 0.4 mm (8)
  • 0.775 mm (2)
  • 0.8 mm (6)
  • 1.0 mm (3)
  • 1.201 mm (2)
  • 1.5 mm (2)
  • 1.6 mm (2)
  • 2.0 mm (2)
  • 2.375 mm (2)
  • 2.5 mm (1)
  • 3.0 mm (1)
  • 3.176 mm (1)
  • 3.95 mm (2)
  • 4.0 mm (2)
Corner Radius Min a Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WS25PT (2)
  • WU10PT (7)
  • WU25PT (13)
  • WU35PT (5)
Hand Of Tool
Hand Of Tool
  • N (15)
Wiper Insert
Wiper Insert
  • N (13)
F Dimension
F Dimension
  • 1.276 mm (2)
  • 1.451 mm (2)
  • 1.826 mm (3)
  • 2.7 mm (2)
  • 3.7 mm (2)
  • 4.7 mm (1)
  • 5.7 mm (1)
  • 7.5 mm (2)
F Dimension Min a F Dimension Max
F Dimension
F Dimension
  • 0.05 in (2)
  • 0.057 in (2)
  • 0.073 in (3)
  • 0.106 in (2)
  • 0.146 in (2)
  • 0.185 in (1)
  • 0.224 in (1)
  • 0.295 in (2)
F Dimension Min a F Dimension Max
Cutting Direction
Cutting Direction
  • E (15)
frontEnd
Clamp Style
Clamp Style
  • Y (15)
Cutting Width
Cutting Width
  • 0.055 in (2)
  • 0.079 in (3)
  • 0.084 in (3)
  • 0.094 in (3)
  • 0.095 in (3)
  • 0.098 in (3)
  • 0.119 in (2)
  • 0.123 in (2)
  • 0.125 in (2)
  • 0.13 in (2)
  • 0.157 in (2)
  • 0.162 in (2)
  • 0.187 in (2)
  • 0.188 in (2)
  • 0.192 in (2)
  • 0.197 in (1)
  • 0.202 in (1)
  • 0.237 in (1)
  • 0.241 in (1)
  • 0.25 in (1)
  • 0.255 in (1)
  • 0.281 in (1)
  • 0.312 in (2)
  • 0.315 in (2)
  • 0.317 in (2)
  • 0.32 in (2)
Cutting Width Min a Cutting Width Max
Cutting Width
Cutting Width
  • 1.401 mm (2)
  • 2.0 mm (3)
  • 2.125 mm (3)
  • 2.375 mm (3)
  • 2.401 mm (3)
  • 2.5 mm (3)
  • 3.0 mm (2)
  • 3.125 mm (2)
  • 3.176 mm (2)
  • 3.301 mm (2)
  • 4.0 mm (2)
  • 4.125 mm (2)
  • 4.75 mm (2)
  • 4.775 mm (2)
  • 4.875 mm (2)
  • 5.0 mm (1)
  • 5.125 mm (1)
  • 6.0 mm (1)
  • 6.125 mm (1)
  • 6.351 mm (1)
  • 6.476 mm (1)
  • 7.125 mm (1)
  • 7.926 mm (2)
  • 8.0 mm (2)
  • 8.05 mm (2)
  • 8.125 mm (2)
Cutting Width Min a Cutting Width Max
Insert Shape
Insert Shape
  • PRISMATIC (15)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.551 in (1)
  • 0.591 in (1)
  • 0.63 in (1)
  • 0.669 in (1)
  • 0.787 in (1)
  • 1.181 in (1)
  • 1.575 in (2)
  • 1.969 in (3)
  • 2.362 in (3)
  • 4.724 in (1)
Maximum Cutting Depth Min a Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 14.0 mm (1)
  • 15.0 mm (1)
  • 16.0 mm (1)
  • 17.0 mm (1)
  • 20.0 mm (1)
  • 30.0 mm (1)
  • 40.0 mm (2)
  • 50.0 mm (3)
  • 60.0 mm (3)
  • 120.0 mm (1)
Maximum Cutting Depth Min a Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • H W (13)
backEnd
Connection Type
Connection Type
  • CUTOFF BLADE (15)
Shank Height
Shank Height
  • 0.748 in (3)
  • 1.024 in (5)
  • 1.26 in (6)
  • 2.067 in (1)
Shank Height Min a Shank Height Max
Shank Height
Shank Height
  • 19.0 mm (3)
  • 25.975 mm (1)
  • 26.0 mm (4)
  • 31.975 mm (1)
  • 32.0 mm (5)
  • 52.5 mm (1)
Shank Height Min a Shank Height Max
Shank Width
Shank Width
  • 0.065 in (3)
  • 0.072 in (4)
  • 0.095 in (2)
  • 0.134 in (2)
  • 0.174 in (1)
  • 0.213 in (1)
  • 0.276 in (2)
Shank Width Min a Shank Width Max
Shank Width
Shank Width
  • 1.651 mm (3)
  • 1.8 mm (4)
  • 2.401 mm (2)
  • 3.401 mm (2)
  • 4.4 mm (1)
  • 5.4 mm (1)
  • 7.0 mm (2)
Shank Width Min a Shank Width Max
No filters matching ""

WGC • Lâmina de corte com ponta dupla

(15) WGC • Lâmina de corte com ponta dupla

WGC • Blade Holders • Inch

(3) WGC • Blade Holders • Inch

WGC • Suportes de lâminas • Métrico

(3) WGC • Suportes de lâminas • Métrico
Você está prestes a adicionar à sua página Minhas soluções. Deseja continuar?
product-image
Please adjust the following properties from

Código de catálogo ISO

Número do catálogo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

 

Can’t find the file type you’re looking for?

Você deve ser registrado para ver as informações do seu painel
Session expired due to inactivity, please login again
Os produtos () que você estava tentando adicionar ao carrinho não estão disponíveis, Entrar em contato com o atendimento ao cliente
itens adicionados com sucesso ao carrinho
Ver o carrinho

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Código de catálogo ISO Classe    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Obrigado pelo seu registro bem-sucedido. Agora você tem acesso imediato para fazer login e pode utilizar o site.

You are about to leave the Solution building process.

Are you sure you want to leave?