successfully added to cart
View Cart

Notifications

Mark all as read

GT Series

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (231)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (163)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (178)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (178)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (92)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (53)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (92)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (53)
  • M Stainless Steel (214)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (178)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (107)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (143)
  • K Cast Iron (54)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (54)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (54)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (19)
  • N Non-Ferrous Materials (174)
    • N1
      Wrought Aluminum
      (120)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (174)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (43)
  • S High-Temp Alloys (310)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (92)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (135)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (135)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (83)
  • H Hardened Materials (10)
    • H1
      Hardened Materials 44-48 HRC
      (10)
    • H2
      Hardened Materials 48-55 HRC
      (10)
Select All Star
  • US (127)
Applications
Applications
  • Tapping Blind Hole Tapping Blind Hole (380)
  • Tapping Through Hole Tapping Through Hole (334)
  • Threading Threading (740)
Cutting Length
Cutting Length
  • 6.0 mm (4)
  • 7.0 mm (4)
  • 7.9 mm (18)
  • 8.0 mm (20)
  • 8.1 mm (8)
  • 9.0 mm (6)
  • 9.1 mm (17)
  • 10.0 mm (66)
  • 10.5 mm (1)
  • 10.9 mm (2)
  • 11.0 mm (10)
  • 11.1 mm (29)
  • 11.2 mm (8)
  • 11.6 mm (10)
  • 11.8 mm (8)
  • 11.9 mm (4)
  • 12.0 mm (40)
  • 12.1 mm (11)
  • 12.2 mm (3)
  • 12.4 mm (28)
  • 12.7 mm (4)
  • 13.0 mm (28)
  • 13.1 mm (4)
  • 13.4 mm (9)
  • 14.0 mm (17)
  • 14.2 mm (14)
  • 14.9 mm (1)
  • 15.0 mm (69)
  • 15.1 mm (25)
  • 15.2 mm (10)
  • 16.0 mm (33)
  • 17.0 mm (7)
  • 18.0 mm (49)
  • 19.0 mm (5)
  • 19.6 mm (31)
  • 20.0 mm (33)
  • 21.0 mm (7)
  • 21.1 mm (3)
  • 22.0 mm (19)
  • 23.0 mm (6)
  • 23.1 mm (15)
  • 24.0 mm (5)
  • 25.0 mm (9)
  • 25.4 mm (14)
  • 26.0 mm (3)
  • 27.0 mm (5)
  • 30.0 mm (6)
  • 31.8 mm (4)
  • 32.0 mm (3)
  • 33.3 mm (1)
  • 35.0 mm (2)
  • 40.0 mm (1)
  • 40.4 mm (1)
Cutting Length Min to Cutting Length Max
Cutting Length
Cutting Length
  • 0.16 in (1)
  • 0.236 in (4)
  • 0.276 in (4)
  • 0.31 in (30)
  • 0.315 in (5)
  • 0.32 in (10)
  • 0.35 in (4)
  • 0.36 in (20)
  • 0.39 in (43)
  • 0.394 in (16)
  • 0.4 in (7)
  • 0.41 in (1)
  • 0.43 in (8)
  • 0.433 in (4)
  • 0.44 in (37)
  • 0.46 in (10)
  • 0.47 in (51)
  • 0.48 in (14)
  • 0.49 in (28)
  • 0.5 in (4)
  • 0.51 in (24)
  • 0.512 in (4)
  • 0.52 in (4)
  • 0.53 in (9)
  • 0.55 in (10)
  • 0.551 in (7)
  • 0.56 in (14)
  • 0.58 in (1)
  • 0.59 in (58)
  • 0.591 in (22)
  • 0.6 in (24)
  • 0.63 in (33)
  • 0.669 in (7)
  • 0.7087 in (2)
  • 0.709 in (8)
  • 0.71 in (39)
  • 0.75 in (5)
  • 0.77 in (31)
  • 0.787 in (5)
  • 0.7874 in (1)
  • 0.79 in (27)
  • 0.83 in (10)
  • 0.866 in (19)
  • 0.91 in (21)
  • 0.945 in (5)
  • 0.98 in (8)
  • 0.984 in (1)
  • 1.0 in (14)
  • 1.024 in (3)
  • 1.063 in (5)
  • 1.18 in (4)
  • 1.181 in (2)
  • 1.25 in (4)
  • 1.26 in (3)
  • 1.31 in (1)
  • 1.38 in (2)
  • 1.57 in (1)
  • 1.59 in (1)
Cutting Length Min to Cutting Length Max
Thread Size
Thread Size
  • 1 - 8 (4)
  • 1/2 - 13 (21)
  • 1/2 - 20 (15)
  • 1/4 - 20 (28)
  • 1/4 - 28 (19)
  • 10 - 24 (19)
  • 10 - 32 (26)
  • 2 - 56 (11)
  • 3/4 - 10 (10)
  • 3/4 - 16 (6)
  • 3/8 - 16 (29)
  • 3/8 - 24 (14)
  • 4 - 40 (17)
  • 4 - 48 (2)
  • 5 - 40 (7)
  • 5/16 - 18 (23)
  • 5/16 - 24 (16)
  • 5/16- 24 (1)
  • 5/8 - 11 (11)
  • 5/8 - 18 (6)
  • 6 - 32 (19)
  • 6 - 40 (4)
  • 7/16 - 14 (10)
  • 7/16 - 20 (12)
  • 8 - 32 (19)
  • 8 - 36 (4)
  • 9/16 - 18 (2)
  • M10 X 1 (10)
  • M10 X 1,25 (12)
  • M10 X 1,5 (35)
  • M12 X 1,25 (9)
  • M12 X 1,5 (15)
  • M12 X 1,75 (32)
  • M14 X 1,5 (14)
  • M14 X 2 (15)
  • M16 X 1,5 (14)
  • M16 X 2 (20)
  • M18 X 1,5 (3)
  • M18 X 2 (2)
  • M18 X 2,5 (1)
  • M2,5 X 0,45 (5)
  • M20 X 2,5 (10)
  • M24 X 3 (4)
  • M3 X 0,5 (24)
  • M3,5 X 0,6 (3)
  • M30 X 3,5 (2)
  • M36 X 4 (1)
  • M4 X 0,7 (26)
  • M5 X 0,8 (32)
  • M6 X 1 (40)
  • M7 X 1 (5)
  • M8 X 1 (12)
  • M8 X 1,25 (39)
Thread Tolerance Class ANSI
Thread Tolerance Class ANSI
  • 2BX (33)
  • 3BX (72)
Thread Tolerance Class ISO
Thread Tolerance Class ISO
  • 6H-I (50)
  • 6HX-I (231)
Tap PD Class
Tap PD Class
  • D10 (3)
  • D11 (3)
  • D12 (1)
  • D3 (13)
  • D4 (19)
  • D5 (34)
  • D6 (18)
  • D7 (2)
  • D8 (3)
  • D9 (8)
  • H2 (31)
  • H3 (147)
  • H4 (15)
  • H5 (41)
  • H6 (10)
  • H7 (6)
Connection Style
Connection Style
  • Cylindrical with Drive Square (732)
Number of Flutes
Number of Flutes
  • 0 (3)
  • 2 (97)
  • 3 (390)
  • 4 (156)
  • 5 (39)
  • 6 (55)
Internal Coolant Capability
Internal Coolant Capability
Application
Coating
Coating
  • CrC/C (107)
  • TiCN (90)
  • Uncoated (1)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WH36MG (17)
  • WN35MG (8)
  • WN38MG (26)
  • WN44EG (79)
  • WN48EG (15)
  • WP31MG (51)
  • WS30MG (10)
  • WS32MG (16)
  • WS34MG (172)
  • WS39MG (100)
  • WU32MG (246)
Tap Standard
Tap Standard
  • ANSI (318)
  • DIN 2174 (41)
  • DIN 371 (93)
  • DIN 374 (54)
  • DIN 376 (68)
  • DIN-ANSI (150)
Tap Type
Tap Type
  • 11 (33)
  • 13 (64)
  • 3 (112)
  • 8 (531)
Front-End
Thread TPI
Thread TPI
  • 8.0 mm (4)
  • 10.0 mm (10)
  • 11.0 mm (11)
  • 13.0 mm (21)
  • 14.0 mm (10)
  • 16.0 mm (35)
  • 18.0 mm (31)
  • 20.0 mm (55)
  • 24.0 mm (50)
  • 28.0 mm (19)
  • 32.0 mm (64)
  • 36.0 mm (4)
  • 40.0 mm (28)
  • 48.0 mm (2)
  • 56.0 mm (11)
Thread TPI Min to Thread TPI Max
Thread TPI
Thread TPI
  • 8.0 in (4)
  • 10.0 in (10)
  • 11.0 in (11)
  • 13.0 in (21)
  • 14.0 in (10)
  • 16.0 in (35)
  • 18.0 in (31)
  • 20.0 in (55)
  • 24.0 in (50)
  • 28.0 in (19)
  • 32.0 in (64)
  • 36.0 in (4)
  • 40.0 in (28)
  • 48.0 in (2)
  • 56.0 in (11)
Thread TPI Min to Thread TPI Max
Thread Pitch
Thread Pitch
  • 0.45 mm (5)
  • 0.5 mm (24)
  • 0.6 mm (3)
  • 0.7 mm (26)
  • 0.8 mm (32)
  • 1.0 mm (68)
  • 1.25 mm (59)
  • 1.5 mm (81)
  • 1.75 mm (32)
  • 2.0 mm (37)
  • 2.5 mm (11)
  • 3.0 mm (4)
  • 3.5 mm (2)
  • 4.0 mm (1)
Thread Pitch Min to Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.45 in (5)
  • 0.5 in (24)
  • 0.6 in (3)
  • 0.7 in (26)
  • 0.8 in (32)
  • 1.0 in (68)
  • 1.25 in (59)
  • 1.5 in (81)
  • 1.75 in (32)
  • 2.0 in (37)
  • 2.5 in (11)
  • 3.0 in (4)
  • 3.5 in (2)
  • 4.0 in (1)
Thread Pitch Min to Thread Pitch Max
Chamfer Form
Chamfer Form
  • FB (87)
  • PC (308)
  • SB (345)
Back-End
Back-End Diameter
Back-End Diameter
  • 3.5 mm (11)
  • 3.581 mm (81)
  • 4.267 mm (36)
  • 4.5 mm (13)
  • 4.928 mm (58)
  • 6.0 mm (48)
  • 6.077 mm (1)
  • 6.477 mm (63)
  • 7.0 mm (11)
  • 8.0 mm (25)
  • 8.077 mm (65)
  • 8.204 mm (22)
  • 9.0 mm (37)
  • 9.322 mm (54)
  • 9.677 mm (61)
  • 10.0 mm (28)
  • 10.897 mm (3)
  • 11.0 mm (28)
  • 12.0 mm (32)
  • 12.192 mm (20)
  • 14.0 mm (6)
  • 14.986 mm (16)
  • 16.0 mm (10)
  • 18.0 mm (4)
  • 20.32 mm (4)
  • 22.0 mm (2)
  • 28.0 mm (1)
Back-End Diameter Min to Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.1378 in (10)
  • 0.138 in (1)
  • 0.141 in (80)
  • 0.1417 in (1)
  • 0.168 in (36)
  • 0.177 in (1)
  • 0.1772 in (12)
  • 0.194 in (58)
  • 0.236 in (2)
  • 0.2362 in (46)
  • 0.255 in (63)
  • 0.2756 in (11)
  • 0.315 in (25)
  • 0.318 in (66)
  • 0.323 in (22)
  • 0.3543 in (37)
  • 0.367 in (54)
  • 0.381 in (61)
  • 0.3937 in (27)
  • 0.394 in (1)
  • 0.429 in (3)
  • 0.4331 in (28)
  • 0.4724 in (32)
  • 0.48 in (20)
  • 0.5512 in (6)
  • 0.59 in (16)
  • 0.6299 in (10)
  • 0.7087 in (4)
  • 0.8 in (4)
  • 0.8661 in (2)
  • 1.1024 in (1)
Back-End Diameter Min to Back-End Diameter Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

High-Performance Taps • Victory™ • GT Series • HSS-E PM

Victory™ • GT24 • Form C Semi-Bottoming Entry Taper • DIN Length ANSI Shank
(14 Products)
  • Tapping: Through HoleTapping: Through Hole
  • Tapping: Blind HoleTapping: Blind Hole
  • HSS-E-PMHSS-E-PM
  • 3850938509
  • DIN Number ANSIDIN Number ANSI
  • Flood Coolant: TappingFlood Coolant: Tapping
  • Manufacturer’s Specs: UNCManufacturer’s Specs: UNC
  • Manufacturer’s Specs: UNFManufacturer’s Specs: UNF
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Number of Lube Grooves Tap Pitch Diameter Limit
5944876 GT245001 GT245001 WU32MG 6 - 32 56.5000 2.220 10.5000 .4100 20.5000 .8100 3.581 .141 2 H3  
    List price:
    $40.20 /each.
    Your price::
    Qty
    5944974 GT245009 GT245009 WU32MG   1/4 - 20 80.9000 3.180 13.0000 .5100 30.9000 1.220 6.477 .255 4 H4
      List price:
      $44.08 /each.
      Your price::
      Qty
      5944975 GT245010 GT245010 WU32MG 1/4 - 20 80.9000 3.180 13.0000 .5100 30.9000 1.210 6.477 .255 4 H6  
        List price:
        $44.08 /each.
        Your price::
        Qty
        5944978 GT245013 GT245013 WU32MG 5/16 - 18 91.0000 3.580 14.0000 .5500 36.0000 1.420 8.077 .318 4 H5  
          List price:
          $58.34 /each.
          Your price::
          Qty
          5944982 GT245017 GT245017 WU32MG 3/8 - 16 101.1000 3.980 16.0000 .6300 39.0000 1.540 9.677 .381 6 H5  
            List price:
            $71.13 /each.
            Your price::
            Qty
            5944990 GT245025 GT245025 WU32MG 1/2 - 13 110.0000 4.330 20.0000 .7900 47.0000 1.850 9.322 .367 6 H5  
              List price:
              $97.87 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              • Tapping: Through HoleTapping: Through Hole
              • Tapping: Blind HoleTapping: Blind Hole
              • HSS-E-PMHSS-E-PM
              • 3850938509
              • DIN Number ANSIDIN Number ANSI
              • Flood Coolant: TappingFlood Coolant: Tapping
              • Manufacturer’s Specs: MManufacturer’s Specs: M
              • Manufacturer’s Specs: MFManufacturer’s Specs: MF
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Number of Lube Grooves Tap Pitch Diameter Limit
              5945012 GT245037 GT245037 WU32MG M3 X 0,5 56.0000 2.200 10.0000 .3900 20.0000 .7900 3.581 .141 2 D5  
                List price:
                $36.57 /each.
                Your price::
                Qty
                5945014 GT245039 GT245039 WU32MG M4 X 0,7 63.0000 2.480 10.0000 .3900 21.0000 .8300 4.267 .168 4 D6  
                  List price:
                  $37.15 /each.
                  Your price::
                  Qty
                  5945016 GT245041 GT245041 WU32MG   M6 X 1 80.0000 3.150 13.0000 .5100 30.0000 1.180 6.477 .255 4 D8
                    List price:
                    $40.08 /each.
                    Your price::
                    Qty
                    5945019 GT245044 GT245044 WU32MG M8 X 1,25 90.0000 3.540 14.0000 .5500 35.0000 1.380 8.077 .318 6 D9  
                      List price:
                      $53.07 /each.
                      Your price::
                      Qty
                      5945020 GT245045 GT245045 WU32MG M10 X 1,25 100.0000 3.940 16.0000 .6300 39.0000 1.530 9.677 .381 6 D9  
                        List price:
                        $64.70 /each.
                        Your price::
                        Qty
                        5945023 GT245048 GT245048 WU32MG M12 X 1,5 110.0000 4.330 18.0000 .7100 44.0000 1.730 9.322 .367 6 D9  
                          List price:
                          $84.74 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty

                          Sold in pkg. of

                          ORIGINAL PRODUCT

                          • Tapping: Blind HoleTapping: Blind Hole
                          • HSS-E-PMHSS-E-PM
                          • 3851138511
                          • DIN Number ANSIDIN Number ANSI
                          • Flood Coolant: TappingFlood Coolant: Tapping
                          • Manufacturer’s Specs: UNCManufacturer’s Specs: UNC
                          • Manufacturer’s Specs: UNFManufacturer’s Specs: UNF
                          View Products
                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Number of Lube Grooves Tap Pitch Diameter Limit
                          5945091 GT265002 GT265002 WU32MG 2 - 56 44.5000 1.750 11.2000 .4400 12.7000 .5000 3.581 .141 0 H3  
                            List price:
                            $43.74 /each.
                            Your price::
                            Qty
                            5945094 GT265005 GT265005 WU32MG 4 - 40 56.0000 2.200 10.0000 .3900 18.0000 .7100 3.581 .141 0 H3  
                              List price:
                              $40.20 /each.
                              Your price::
                              Qty
                              5945101 GT265012 GT265012 WU32MG 8 - 32 63.0000 2.480 10.0000 .3900 21.0000 .8300 4.267 .168 4 H3  
                                List price:
                                $40.86 /each.
                                Your price::
                                Qty
                                5945107 GT265018 GT265018 WU32MG   1/4 - 20 80.0000 3.150 13.0000 .5100 30.0000 1.180 6.477 .255 4 H4
                                  List price:
                                  $44.08 /each.
                                  Your price::
                                  Qty
                                  5945108 GT265019 GT265019 WU32MG 1/4 - 20 80.0000 3.150 13.0000 .5100 30.0000 1.180 6.477 .255 4 H6  
                                    List price:
                                    $44.08 /each.
                                    Your price::
                                    Qty
                                    5945115 GT265026 GT265026 WU32MG 3/8 - 16 100.0000 3.940 16.0000 .6300 39.0000 1.540 9.677 .381 6 H5  
                                      List price:
                                      $71.13 /each.
                                      Your price::
                                      Qty
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is not available
                                      Replacement Product This item may be available through a distributor
                                      Qty

                                      Sold in pkg. of

                                      ORIGINAL PRODUCT

                                      High-Performance Taps • Victory™ • GT Series • HSS-E PM

                                      Victory™ • GT26 • Form E Bottoming Entry Taper • Metric • DIN Length ANSI Shank
                                      (8 Products)
                                      • Tapping: Blind HoleTapping: Blind Hole
                                      • HSS-E-PMHSS-E-PM
                                      • 3851138511
                                      • DIN Number ANSIDIN Number ANSI
                                      • Flood Coolant: TappingFlood Coolant: Tapping
                                      • Manufacturer’s Specs: MManufacturer’s Specs: M
                                      • Manufacturer’s Specs: MFManufacturer’s Specs: MF
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Number of Lube Grooves Tap Pitch Diameter Limit
                                      5945137 GT265048 GT265048 WU32MG M4 X 0,7 63.0000 2.480 10.0000 .3900 21.0000 .8300 4.267 .168 4 D6  
                                        List price:
                                        $37.15 /each.
                                        Your price::
                                        Qty
                                        5945138 GT265049 GT265049 WU32MG M5 X 0,8 70.0000 2.760 10.0000 .3900 25.0000 .9800 4.928 .194 4 D7  
                                          List price:
                                          $38.11 /each.
                                          Your price::
                                          Qty
                                          5945139 GT265050 GT265050 WU32MG M6 X 1 80.0000 3.150 13.0000 .5100 30.0000 1.180 6.477 .255 4 D8  
                                            List price:
                                            $40.08 /each.
                                            Your price::
                                            Qty
                                            5945142 GT265053 GT265053 WU32MG   M8 X 1,25 90.0000 3.540 14.0000 .5500 35.0000 1.380 8.077 .318 6 D9
                                              List price:
                                              $53.07 /each.
                                              Your price::
                                              Qty
                                              5945143 GT265054 GT265054 WU32MG M10 X 1,25 100.0000 3.940 16.0000 .6300 39.0000 1.530 9.677 .381 6 D9  
                                                List price:
                                                $64.70 /each.
                                                Your price::
                                                Qty
                                                5945145 GT265056 GT265056 WU32MG M12 X 1,25 110.0000 4.330 18.0000 .7100 44.0000 1.730 9.322 .367 6 D9  
                                                  List price:
                                                  $84.74 /each.
                                                  Your price::
                                                  Qty
                                                  List price:
                                                  Discount: %
                                                  Your price::
                                                  Replacement This item is not available
                                                  Replacement Product This item may be available through a distributor
                                                  Qty

                                                  Sold in pkg. of

                                                  ORIGINAL PRODUCT

                                                  High-Performance Taps • Victory™ • GT Series • HSS-E PM

                                                  Victory™ Spiral-Flute HSS-E-PM Taps • Blind Holes
                                                  (23 Products)
                                                  • Tapping: Blind HoleTapping: Blind Hole
                                                  • HSS-E-PMHSS-E-PM
                                                  • 3851138511
                                                  • Tapping Helix Angle: 10°Tapping Helix Angle: 10°
                                                  • Flood Coolant: TappingFlood Coolant: Tapping
                                                  • Manufacturer’s Specs: UNFManufacturer’s Specs: UNF
                                                  • Manufacturer’s Specs: UNCManufacturer’s Specs: UNC
                                                  • Manufacturer’s Specs: ANSIManufacturer’s Specs: ANSI
                                                  View Products
                                                  SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Tap Pitch Diameter Limit
                                                  5705935 GT945012 GT945012 WS39MG   10 - 32 60.2000 2.370 12.0000 .4700 23.2000 .9100 4.928 .194 3 H3
                                                    List price:
                                                    $23.15 /each.
                                                    Your price::
                                                    Qty
                                                    5703871 GT945016 GT945016 WS39MG 1/4 - 28 63.4000 2.500 11.1000 .4400 25.5000 1.000 6.477 .255 3 H3  
                                                      List price:
                                                      $25.96 /each.
                                                      Your price::
                                                      Qty
                                                      5706034 GT945028 GT945028 WS39MG 7/16 - 14 80.3000 3.160 18.0000 .7100 37.8000 1.490 8.204 .323 3 H3  
                                                        List price:
                                                        $46.09 /each.
                                                        Your price::
                                                        Qty
                                                        5706036 GT945030 GT945030 WS39MG 7/16 - 20 80.3000 3.160 18.0000 .7100 37.8000 1.490 8.204 .323 3 H3  
                                                          List price:
                                                          $46.09 /each.
                                                          Your price::
                                                          Qty
                                                          5706032 GT945036 GT945036 WS39MG 5/8 - 18 96.8000 3.810 23.1000 .9100 48.0000 1.890 12.192 .48 3 H3  
                                                            List price:
                                                            $114.82 /each.
                                                            Your price::
                                                            Qty
                                                            5705981 GT945038 GT945038 WU32MG 4 - 40 47.6000 1.880 14.2000 .5600 17.5000 .6900 3.581 .141 3 H3