successfully added to cart
View Cart

Notifications

Mark all as read
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Applications
  • Chamfer Turning Chamfer Turning (1)
  • Facing Facing (11)
  • Multiple Direction Cutting Multiple Direction Cutting (19)
  • Plunge Turning Plunge Turning (1)
  • Profiling Profiling (17)
  • TRN Boring TRN Boring (4)
  • Turning Turning (22)
Workpiece Material
  • P Steel (22)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (22)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (22)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (22)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (22)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (22)
  • M Stainless Steel (22)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (22)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (22)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (22)
  • K Cast Iron (22)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (22)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (22)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (22)
  • N Non-Ferrous Materials (22)
    • N1
      Wrought Aluminum
      (22)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (22)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (15)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (22)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (22)
    • N6
      Carbon, Graphite Composites, CFRP
      (22)
    • N7
      MMC's
      (22)
  • S High-Temp Alloys (22)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (22)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (22)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (22)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (22)
  • H Hardened Materials (22)
    • H1
      Hardened Materials 44-48 HRC
      (22)
    • H2
      Hardened Materials 48-55 HRC
      (22)
    • H3
      Hardened Materials 56-60 HRC
      (22)
    • H4
      Hardened Materials >60 HRC
      (22)
Cutting Condition
  • Heavily Interrupted Cut (22)
  • Interrupted (16)
  • Lightly Interrupted Cut (22)
  • Smooth Cut (22)
  • Varying Depth of Cut (22)
Cutting Condition Material
  • H-All (22)
  • K-All (22)
  • K1 (3)
  • M-All (22)
  • N-All (22)
  • P-All (22)
  • S-All (22)
  • S2 (22)
  • S4 (11)
Tool Cutting Edge Angle
  • 45.0 (1)
  • 62.5 (2)
  • 90.0 (1)
  • 93.0 (10)
  • 95.0 (4)
  • 107.5 (4)
to
Connection Style
  • KM (18)
Cutting Edges Per Insert
  • 1.0 (21)
  • 2.0 (17)
  • 3.0 (4)
  • 4.0 (18)
  • 6.0 (4)
  • 8.0 (9)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.1 (13)
  • 0.102 (11)
  • 0.2 (15)
  • 0.203 (13)
  • 0.34 (6)
  • 0.397 (22)
  • 0.4 (22)
  • 0.406 (11)
  • 0.6 (2)
  • 0.79 (1)
  • 0.792 (8)
  • 0.794 (22)
  • 0.8 (22)
  • 1.19 (2)
  • 1.191 (22)
  • 1.2 (22)
  • 1.587 (2)
  • 1.588 (8)
  • 1.6 (16)
  • 2.381 (3)
  • 2.4 (3)
to
Corner Radius
  • 0.004 (19)
  • 0.008 (15)
  • 0.0083 (2)
  • 0.013 (6)
  • 0.0156 (22)
  • 0.016 (22)
  • 0.031 (22)
  • 0.0312 (22)
  • 0.0313 (22)
  • 0.0315 (2)
  • 0.0469 (22)
  • 0.047 (16)
  • 0.0472 (2)
  • 0.0516 (1)
  • 0.0625 (16)
  • 0.063 (13)
  • 0.0938 (6)
  • 0.1563 (2)
  • 0.312 (6)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (20)
  • 241 (2)
  • CL4 (11)
  • CM2 (20)
  • CM3 (11)
  • CM4 (5)
  • CPX (14)
  • CW2 (10)
  • CW2015 (20)
  • CW5025 (22)
  • GX (3)
  • HK1500 (13)
  • HT2 (8)
  • HTX (4)
  • K060 (8)
  • K090 (20)
  • K1 (2)
  • K10M (22)
  • K10P (22)
  • K10U (22)
  • K15U (22)
  • K20K (22)
  • K21 (5)
  • K25M (22)
  • K25P (22)
  • K313 (22)
  • K35P (14)
  • K420 (14)
  • K45 (14)
  • K68 (20)
  • KB1340 (3)
  • KB1345 (7)
  • KB1610 (16)
  • KB1625 (14)
  • KB1630 (13)
  • KB5610 (13)
  • KB5625 (14)
  • KB5630 (11)
  • KB9610 (22)
  • KB9640 (5)
  • KBH10 (22)
  • KBH10B (19)
  • KBH20 (22)
  • KBH20B (19)
  • KBK35 (2)
  • KC210 (12)
  • KC250 (6)
  • KC5010 (22)
  • KC5025 (22)
  • KC5410 (22)
  • KC5510 (22)
  • KC5525 (13)
  • KC710 (2)
  • KC720 (16)
  • KC722 (2)
  • KC730 (16)
  • KC7310 (22)
  • KC732 (16)
  • KC8050 (22)
  • KC810 (22)
  • KC850 (22)
  • KC9010 (22)
  • KC9025 (22)
  • KC910 (22)
  • KC9105 (22)
  • KC9110 (22)
  • KC9120 (22)
  • KC9125 (22)
  • KC9125RR (1)
  • KC9140 (22)
  • KC9145 (14)
  • KC9210 (6)
  • KC9215 (22)
  • KC9225 (22)
  • KC9240 (22)
  • KC9240NEW (22)
  • KC9245 (22)
  • KC9315 (22)
  • KC9320 (22)
  • KC9325 (22)
  • KC935 (22)
  • KC950 (22)
  • KC990 (22)
  • KCD25 (3)
  • KCK05 (22)
  • KCK05B (22)
  • KCK15 (22)
  • KCK15B (22)
  • KCK20 (22)
  • KCK20B (22)
  • KCM15 (22)
  • KCM15B (22)
  • KCM25 (22)
  • KCM25B (22)
  • KCM35 (22)
  • KCM35B (13)
  • KCP05 (22)
  • KCP05B (22)
  • KCP10 (22)
  • KCP10B (22)
  • KCP25 (22)
  • KCP25B (22)
  • KCP30 (22)
  • KCP30B (16)
  • KCP40 (16)
  • KCP40B (16)
  • KCPK05 (20)
  • KCS10 (2)
  • KCS10B (20)
  • KCU10 (22)
  • KCU25 (22)
  • KD050 (14)
  • KD081 (14)
  • KD100 (11)
  • KD120 (14)
  • KD1400 (15)
  • KD1405 (11)
  • KD1425 (15)
  • KM1 (5)
  • KMF (2)
  • KT1120 (8)
  • KT125 (20)
  • KT150 (14)
  • KT175 (20)
  • KT315 (22)
  • KT325 (10)
  • KT5020 (8)
  • KTP10 (3)
  • KU10T (22)
  • KU30T (22)
  • KY1310 (10)
  • KY1320 (22)
  • KY1540 (6)
  • KY1615 (20)
  • KY2000 (8)
  • KY2100 (6)
  • KY3000 (20)
  • KY3400 (10)
  • KY3500 (22)
  • KY4000 (9)
  • KY4300 (5)
  • KY4400 (22)
  • KYHK15B (22)
  • KYK10 (10)
  • KYK25 (10)
  • KYK35 (22)
  • KYS25 (6)
  • KYS30 (8)
  • NL200 (8)
  • NL250 (22)
  • NL300 (11)
  • NL400 (4)
  • NL920 (16)
  • P25 (3)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (8)
  • SP0819 (12)
  • SP0A00 (1)
  • SP3019 (7)
  • SP4019 (8)
  • SP4036 (6)
  • SP4093 (6)
  • SP61EJ (1)
  • THM (5)
  • THM-X (9)
  • THMF-X (5)
  • TN10P (22)
  • TN10U (22)
  • TN15M (22)
  • TN15U (22)
  • TN2000 (13)
  • TN20K (22)
  • TN20P (22)
  • TN30M (22)
  • TN30P (16)
  • TN4000 (13)
  • TN5015 (13)
  • TN5020 (13)
  • TN5105 (16)
  • TN5120 (16)
  • TN6010 (17)
  • TN6025 (13)
  • TN7005 (13)
  • TN7010 (16)
  • TN7015 (16)
  • TN7025 (16)
  • TN7035 (13)
  • TN7105 (12)
  • TN7110 (13)
  • TN7115 (16)
  • TN7125 (13)
  • TN7135 (13)
  • TN8025 (16)
  • TTI15 (8)
  • TTM09 (3)
  • TTR (3)
  • TTS (11)
  • TTX (10)
  • WBH10C (20)
  • WBH10P (11)
  • WBH10U (16)
  • WBH20P (22)
  • WBH25P (14)
  • WBH25U (14)
  • WBH30P (11)
  • WBK40U (3)
  • WBK45U (13)
  • WDN00U (5)
  • WDN25U (15)
  • WK05CT (22)
  • WK15CT (13)
  • WK20CT (22)
  • WM15CT (22)
  • WM25CT (22)
  • WM35CT (22)
  • WP05CT (4)
  • WP15CT (22)
  • WP25CT (22)
  • WP35CT (22)
  • WS10PT (22)
  • WS25PT (22)
  • WU10HT (22)
  • X00511 (2)
Hand Of Tool
  • L (8)
  • N (3)
  • R (7)
Minimum Axial Groove Diameter
  • 1.732 (2)
  • 2.126 (2)
to
Minimum Axial Groove Diameter
  • 44.0 (2)
  • 54.0 (2)
to
Cutting Direction
  • B (4)
  • E (3)
  • S (11)
Rake Angle Style
  • DOUBLE NEGATIVE (15)
  • NEGATIVE-ZERO (3)
Maximum Bore Depth
  • 35.0 (4)
to
Maximum Bore Depth
  • 1.378 (4)
to
Wiper Insert
  • N (22)
  • Y (10)
Front-End
Clamp Style
  • M (22)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (2)
  • D-DIAMOND/RHOMBIC 55 (9)
  • S-SQUARE 90 (1)
  • T-TRIANGLE 60 (2)
  • V-DIAMOND/RHOMBIC 35 (6)
  • W-TRIGON 80 (2)
Insert Geometry
Cutting Tool Material
  • B H (22)
  • B L (22)
  • C A (22)
  • C N (22)
  • D P (21)
  • H T (22)
  • H W (22)
Back-End
Connection Type
  • TAPER SHANK (18)
System Size
  • KM32 (12)
  • KM32TS (6)
Back-End Diameter
  • 1.2598 (22)
to
Back-End Diameter
  • 32.0 (22)
to
other
Platform
  • KM32 (22)
Tool Unit
  • M (22)
Display Configurable Products
  • false (22)
Over All Length [L]
  • 35.0 (17)
  • 40.0 (5)
to
Over All Length [L]
  • 1.378 (17)
  • 1.5748 (4)
  • 1.575 (1)
to
Insert Hand
  • N (22)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert
1144911 KM32TSMVUNR16 KM32TSMVUNR16 35.0000 1.378 27.0000 1.063 54.0000 2.126 VN..160408/VN..332
    List price:
    $245.84 /each.
    Your price::
    Qty
    1144912 KM32TSMVUNL16 KM32TSMVUNL16 35.0000 1.378 27.0000 1.063 54.0000 2.126 VN..160408/VN..332
      List price:
      $245.84 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is not available
      Replacement Product This item may be available through a distributor
      Qty

      Sold in pkg. of

      ORIGINAL PRODUCT

      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
      View Products
      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
      1144914 KM32TSMWLNR08 KM32TSMWLNR08 35.0000 1.378 22.0000 .8660 WN..080408/WN..432 0.18 0.40
        List price:
        $238.76 /each.
        Your price::
        Qty
        1144915 KM32TSMWLNL08 KM32TSMWLNL08 35.0000 1.378 22.0000 .8660 WN..080408/WN..432 0.18 0.40
          List price:
          $238.76 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert
          1144903 KM32TSMTUNR16 KM32TSMTUNR16 35.0000 1.378 22.0000 .8661 44.0000 1.732 TN..160408/TN..332
            List price:
            $238.76 /each.
            Your price::
            Qty
            List price:
            Discount: %
            Your price::
            Replacement This item is not available
            Replacement Product This item may be available through a distributor
            Qty

            Sold in pkg. of

            ORIGINAL PRODUCT

            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
            View Products
            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert
            1144909 KM32TSMVHNR16 KM32TSMVHNR16 35.0000 1.378 22.0000 .8661 VN..160408/VN..332
              List price:
              $245.84 /each.
              Your price::
              Qty
              1144910 KM32TSMVHNL16 KM32TSMVHNL16 35.0000 1.378 22.0000 .8661 VN..160408/VN..332
                List price:
                $245.84 /each.
                Your price::
                Qty
                List price:
                Discount: %
                Your price::
                Replacement This item is not available
                Replacement Product This item may be available through a distributor
                Qty

                Sold in pkg. of

                ORIGINAL PRODUCT

                • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                View Products
                SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                1144875 KM32TSMSDNN12 KM32TSMSDNN12 40.0000 1.575 0.0000 .0000 SN..120408/SN..432 0.16 0.36
                  List price:
                  $238.76 /each.
                  Your price::
                  Qty
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is not available
                  Replacement Product This item may be available through a distributor
                  Qty

                  Sold in pkg. of

                  ORIGINAL PRODUCT

                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                  View Products
                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert
                  1023280 KM32TSMVJNR16 KM32TSMVJNR16 40.0000 1.574 22.0000 .8661 VN..160408/VN..332
                    List price:
                    $245.84 /each.
                    Your price::
                    Qty
                    1023283 KM32TSMVJNL16 KM32TSMVJNL16 40.0000 1.574 22.0000 .8661 VN..160408/VN..332
                      List price:
                      $245.84 /each.
                      Your price::
                      Qty
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty

                      Sold in pkg. of

                      ORIGINAL PRODUCT

                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                      • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                      1023232 KM32TSMDJNR1506 KM32TSMDJNR1506 35.0000 1.378 22.0000 .8660 DN..150608/DN..442 0.14 0.32
                        List price:
                        $245.84 /each.
                        Your price::
                        Qty
                        1023275 KM32TSMDJNL1506 KM32TSMDJNL1506 35.0000 1.378 22.0000 .8661 DN..150608/DN..442 0.14 0.32
                          List price:
                          $245.84 /each.
                          Your price::
                          Qty
                          3095643 KM32TSMDJNL1504 KM32TSMDJNL1504 35.0000 1.378 22.0000 .8661 DN..150408/DN..432 0.15 0.32
                            List price:
                            $247.25 /each.
                            Your price::
                            Qty
                            3095644 KM32TSMDJNR1504 KM32TSMDJNR1504 35.0000 1.378 22.0000 .8660 DN..150408/DN..432 0.15 0.32
                              List price:
                              $247.25 /each.
                              Your price::
                              Qty
                              List price:
                              Discount: %
                              Your price::
                              Replacement This item is not available
                              Replacement Product This item may be available through a distributor
                              Qty

                              Sold in pkg. of

                              ORIGINAL PRODUCT

                              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                              View Products
                              SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                              1023224 KM32TSMCLNR12 KM32TSMCLNR12 35.0000 1.378 22.0000 .8660 CN..120408/CN..432 0.18 0.39
                                List price:
                                $238.76 /each.
                                Your price::
                                Qty
                                1023228 KM32TSMCLNL12 KM32TSMCLNL12 35.0000 1.378 22.0000 .8660 CN..120408/CN..432 0.18 0.39
                                  List price:
                                  $238.76 /each.
                                  Your price::
                                  Qty
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty

                                  Sold in pkg. of

                                  ORIGINAL PRODUCT

                                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                  View Products
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                  1023277 KM32TSMDUNL1506 KM32TSMDUNL1506 35.0000 1.378 22.0000 .8660 DN..150608/DN..442 0.18 0.40
                                    List price:
                                    $245.84 /each.
                                    Your price::
                                    Qty
                                    List price:
                                    Discount: %
                                    Your price::
                                    Replacement This item is not available
                                    Replacement Product This item may be available through a distributor
                                    Qty

                                    Sold in pkg. of

                                    ORIGINAL PRODUCT

                                    • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                    • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                    • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                    View Products
                                    SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                    1022560 KM32TSMDPNN1506 KM32TSMDPNN1506 40.0000 1.574 0.0000 .0000 DN..150608/DN..442 0.15 0.34
                                      List price:
                                      $245.84 /each.
                                      Your price::
                                      Qty
                                      3095645 KM32TSMDPNN1504 KM32TSMDPNN1504 40.0000 1.574 0.0000 .0000 DN..150408/DN..432 0.16 0.34
                                        List price:
                                        $247.25 /each.
                                        Your price::
                                        Qty
                                        List price:
                                        Discount: %
                                        Your price::
                                        Replacement This item is not available
                                        Replacement Product This item may be available through a distributor
                                        Qty

                                        Sold in pkg. of

                                        ORIGINAL PRODUCT

                                        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                        • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                        View Products
                                        SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
                                        1023233 KM32TSMDQNR1506 KM32TSMDQNR1506 35.0000 1.378 22.0000 .8661 DN..150608/DN..442 0.16 0.35
                                          List price:
                                          $245.84 /each.
                                          Your price::
                                          Qty
                                          1023276 KM32TSMDQNL1506 KM32TSMDQNL1506 35.0000 1.378 22.0000 .8661 DN..150608/DN..442 0.16 0.35
                                            List price:
                                            $245.84 /each.
                                            Your price::
                                            Qty
                                            List price:
                                            Discount: %
                                            Your price::
                                            Replacement This item is not available
                                            Replacement Product This item may be available through a distributor
                                            Qty

                                            Sold in pkg. of

                                            ORIGINAL PRODUCT

                                            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                            • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
                                            View Products
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert
                                            1023281 KM32TSMTFNL16 KM32TSMTFNL16 35.0000 1.378 22.0000 .8661 44.0000 1.732 TN..160408/TN..332
                                              List price:
                                              $238.76 /each.
                                              Your price::
                                              Qty
                                              List price:
                                              Discount: %
                                              Your price::
                                              Replacement This item is not available
                                              Replacement Product This item may be available through a distributor
                                              Qty

                                              Sold in pkg. of

                                              product-image
                                              Please adjust the following properties from

                                              ISO Catalog Number

                                              ANSI Catalog Number

                                              to find similar products.
                                              If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                              You are about to create a duplicate . Do you want to proceed?
                                              You are about to delete Do you want to proceed?
                                              What would you like to rename your to?
                                              Please enter a valid name
                                              Please enter a name for the duplicate
                                              Please enter a valid name
                                              You are about to add to your My Solutions page. Do you want to proceed?
                                              Please enter a valid name
                                              Send a copy of

                                              Please enter a valid Email
                                              Please enter a valid name

                                              We have found the following CAD Drawings

                                              Select the files you are looking for and download them all at once

                                              You should be logged to see your dashboard information
                                              The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                              item(s) successfully added to the cart
                                              View Cart