successfully added to cart
View Cart

Notifications

Mark all as read

KM40TS™ Internal Cutting Units

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Applications
  • Facing Facing (36)
  • Grooving Grooving (20)
  • ID Grooving ID Grooving (20)
  • ID Thread Turning ID Thread Turning (34)
  • Multiple Direction Cutting Multiple Direction Cutting (70)
  • OD Thread Turning OD Thread Turning (20)
  • Profiling Profiling (84)
  • TRN Boring TRN Boring (82)
  • Threading Threading (34)
  • Turning Turning (36)
Workpiece Material
  • P Steel (104)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (104)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (104)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (104)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (104)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (104)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (104)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (104)
  • M Stainless Steel (104)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (104)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (104)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (104)
  • K Cast Iron (104)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (104)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (104)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (104)
  • N Non-Ferrous Materials (104)
    • N1
      Wrought Aluminum
      (104)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (104)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (100)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (104)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (104)
    • N6
      Carbon, Graphite Composites, CFRP
      (100)
    • N7
      MMC's
      (104)
  • S High-Temp Alloys (104)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (104)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (104)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (104)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (104)
  • H Hardened Materials (100)
    • H1
      Hardened Materials 44-48 HRC
      (100)
    • H2
      Hardened Materials 48-55 HRC
      (86)
    • H3
      Hardened Materials 56-60 HRC
      (74)
    • H4
      Hardened Materials >60 HRC
      (74)
Type of Thread
  • 55 (14)
  • 60 (34)
  • ACME (18)
  • API (10)
  • API BUTTRESS (2)
  • API RD (16)
  • BSPT (12)
  • BSW (22)
  • BUTTRESS (20)
  • M (28)
  • NPT (20)
  • NPTF (12)
  • RD DIN 405 (10)
  • STUB ACME (18)
  • TR DIN 103 (10)
  • UN (32)
  • UNJ (20)
Cutting Condition
  • Heavily Interrupted Cut (90)
  • Interrupted (34)
  • Lightly Interrupted Cut (90)
  • Smooth Cut (90)
  • Varying Depth of Cut (90)
Cutting Condition Material
  • H-All (69)
  • K-All (90)
  • K1 (16)
  • M-All (90)
  • N-All (88)
  • P-All (90)
  • S-All (90)
  • S2 (32)
  • S4 (56)
Tool Cutting Edge Angle
  • 90.0 (48)
  • 93.0 (26)
  • 95.0 (44)
to
Connection Style
  • KM (118)
Cutting Edges Per Insert
  • 1.0 (86)
  • 2.0 (78)
  • 3.0 (24)
  • 4.0 (42)
  • 6.0 (12)
  • 8.0 (14)
to
Corner configuration
Corner Radius
  • 0.03 (4)
  • 0.033 (2)
  • 0.038 (4)
  • 0.051 (16)
  • 0.056 (4)
  • 0.057 (4)
  • 0.066 (8)
  • 0.07 (8)
  • 0.076 (24)
  • 0.08 (24)
  • 0.081 (4)
  • 0.089 (12)
  • 0.09 (12)
  • 0.094 (8)
  • 0.097 (8)
  • 0.1 (79)
  • 0.102 (46)
  • 0.108 (4)
  • 0.116 (4)
  • 0.117 (4)
  • 0.127 (8)
  • 0.131 (8)
  • 0.132 (8)
  • 0.133 (8)
  • 0.15 (8)
  • 0.152 (8)
  • 0.155 (8)
  • 0.157 (8)
  • 0.16 (4)
  • 0.165 (8)
  • 0.173 (8)
  • 0.178 (8)
  • 0.185 (6)
  • 0.19 (20)
  • 0.191 (20)
  • 0.198 (8)
  • 0.2 (82)
  • 0.202 (14)
  • 0.203 (39)
  • 0.21 (8)
  • 0.224 (8)
  • 0.225 (2)
  • 0.235 (8)
  • 0.244 (4)
  • 0.25 (14)
  • 0.251 (8)
  • 0.254 (14)
  • 0.269 (8)
  • 0.282 (8)
  • 0.284 (8)
  • 0.3 (8)
  • 0.305 (2)
  • 0.315 (8)
  • 0.318 (8)
  • 0.33 (8)
  • 0.34 (8)
  • 0.356 (8)
  • 0.397 (52)
  • 0.4 (70)
  • 0.404 (8)
  • 0.406 (16)
  • 0.43 (8)
  • 0.432 (2)
  • 0.445 (8)
  • 0.472 (4)
  • 0.49 (8)
  • 0.5 (12)
  • 0.508 (8)
  • 0.57 (4)
  • 0.572 (8)
  • 0.575 (4)
  • 0.6 (10)
  • 0.7 (4)
  • 0.75 (12)
  • 0.787 (20)
  • 0.792 (14)
  • 0.794 (53)
  • 0.8 (70)
  • 0.902 (8)
  • 0.93 (1)
  • 0.936 (4)
  • 1.0 (20)
  • 1.19 (20)
  • 1.191 (34)
  • 1.194 (20)
  • 1.195 (4)
  • 1.2 (47)
  • 1.25 (20)
  • 1.404 (1)
  • 1.5 (20)
  • 1.585 (8)
  • 1.587 (14)
  • 1.588 (52)
  • 1.6 (32)
  • 1.75 (20)
  • 1.98 (4)
  • 1.981 (8)
  • 2.0 (8)
  • 2.25 (8)
  • 2.381 (8)
  • 2.388 (8)
to
Corner Radius
  • 0.0012 (4)
  • 0.0013 (2)
  • 0.0015 (4)
  • 0.002 (16)
  • 0.0023 (4)
  • 0.0026 (8)
  • 0.0028 (8)
  • 0.003 (24)
  • 0.0031 (20)
  • 0.0032 (4)
  • 0.0035 (12)
  • 0.0037 (8)
  • 0.0038 (8)
  • 0.004 (83)
  • 0.0043 (4)
  • 0.0046 (8)
  • 0.005 (8)
  • 0.0052 (8)
  • 0.0053 (8)
  • 0.0059 (8)
  • 0.006 (16)
  • 0.0062 (8)
  • 0.0063 (4)
  • 0.0065 (8)
  • 0.0068 (8)
  • 0.007 (8)
  • 0.0075 (20)
  • 0.0078 (8)
  • 0.0079 (4)
  • 0.008 (88)
  • 0.0083 (22)
  • 0.0088 (8)
  • 0.0089 (2)
  • 0.0093 (8)
  • 0.0096 (4)
  • 0.0099 (8)
  • 0.01 (14)
  • 0.0106 (8)
  • 0.0111 (8)
  • 0.0112 (8)
  • 0.0118 (8)
  • 0.012 (2)
  • 0.0124 (8)
  • 0.0125 (8)
  • 0.013 (8)
  • 0.0135 (8)
  • 0.014 (8)
  • 0.0156 (70)
  • 0.0159 (8)
  • 0.016 (44)
  • 0.017 (10)
  • 0.0175 (8)
  • 0.0186 (4)
  • 0.0193 (8)
  • 0.0197 (12)
  • 0.02 (8)
  • 0.022 (4)
  • 0.0225 (8)
  • 0.0276 (4)
  • 0.0295 (12)
  • 0.031 (54)
  • 0.0312 (53)
  • 0.0313 (70)
  • 0.0315 (14)
  • 0.0355 (8)
  • 0.0368 (1)
  • 0.0369 (4)
  • 0.0394 (20)
  • 0.0469 (47)
  • 0.047 (58)
  • 0.0472 (14)
  • 0.0492 (20)
  • 0.0553 (1)
  • 0.0591 (20)
  • 0.0625 (52)
  • 0.063 (24)
  • 0.0689 (20)
  • 0.078 (8)
  • 0.0787 (8)
  • 0.0886 (8)
  • 0.0938 (8)
  • 0.094 (8)
  • 0.106 (4)
  • 0.1563 (14)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (22)
  • 241 (14)
  • CG5 (11)
  • CL4 (14)
  • CM1 (11)
  • CM2 (22)
  • CM3 (14)
  • CM4 (14)
  • CPX (22)
  • CW2 (14)
  • CW2015 (22)
  • CW5025 (32)
  • GX (14)
  • HCK20 (4)
  • HCM15 (2)
  • HK1500 (26)
  • HT2 (16)
  • HTX (14)
  • K060 (22)
  • K090 (22)
  • K1 (14)
  • K10M (34)
  • K10P (34)
  • K10U (32)
  • K15 (13)
  • K15U (32)
  • K20K (34)
  • K21 (14)
  • K25M (36)
  • K25P (32)
  • K2885 (20)
  • K313 (90)
  • K35P (18)
  • K420 (42)
  • K45 (22)
  • K4H (14)
  • K68 (82)
  • KB1340 (16)
  • KB1345 (36)
  • KB1610 (56)
  • KB1625 (28)
  • KB1630 (47)
  • KB5610 (50)
  • KB5625 (46)
  • KB5630 (33)
  • KB9610 (59)
  • KB9640 (26)
  • KBH10 (32)
  • KBH10B (22)
  • KBH20 (32)
  • KBH20B (22)
  • KBK35 (14)
  • KC210 (22)
  • KC250 (49)
  • KC5010 (96)
  • KC5025 (104)
  • KC5410 (86)
  • KC5510 (36)
  • KC5525 (36)
  • KC710 (46)
  • KC720 (99)
  • KC722 (40)
  • KC730 (104)
  • KC7310 (43)
  • KC732 (74)
  • KC8050 (70)
  • KC810 (88)
  • KC850 (88)
  • KC9010 (60)
  • KC9025 (70)
  • KC910 (80)
  • KC9105 (60)
  • KC9110 (90)
  • KC9120 (66)
  • KC9125 (70)
  • KC9140 (36)
  • KC9145 (32)
  • KC9215 (36)
  • KC9225 (70)
  • KC9240 (70)
  • KC9240NEW (70)
  • KC9245 (36)
  • KC9315 (70)
  • KC9320 (80)
  • KC9325 (60)
  • KC935 (90)
  • KC950 (76)
  • KC990 (70)
  • KCD25 (42)
  • KCK05 (70)
  • KCK05B (40)
  • KCK15 (60)
  • KCK15B (60)
  • KCK20 (84)
  • KCK20B (90)
  • KCM15 (70)
  • KCM15B (54)
  • KCM25 (70)
  • KCM25B (60)
  • KCM35 (51)
  • KCM35B (26)
  • KCP05 (70)
  • KCP05B (36)
  • KCP10 (70)
  • KCP10B (90)
  • KCP25 (70)
  • KCP25B (90)
  • KCP30 (70)
  • KCP30B (34)
  • KCP40 (32)
  • KCP40B (34)
  • KCPK05 (41)
  • KCS10 (48)
  • KCS10B (68)
  • KCU10 (90)
  • KCU25 (90)
  • KD050 (50)
  • KD081 (30)
  • KD100 (64)
  • KD105 (18)
  • KD120 (54)
  • KD1400 (66)
  • KD1405 (56)
  • KD1425 (74)
  • KM1 (14)
  • KMF (14)
  • KT1120 (14)
  • KT125 (29)
  • KT150 (29)
  • KT175 (76)
  • KT315 (90)
  • KT325 (16)
  • KTP10 (42)
  • KU10 (18)
  • KU10T (90)
  • KU25T (26)
  • KU30T (80)
  • KY1310 (32)
  • KY1320 (32)
  • KY1540 (22)
  • KY1615 (22)
  • KY2000 (22)
  • KY2100 (22)
  • KY3000 (30)
  • KY3400 (32)
  • KY3500 (32)
  • KY4000 (14)
  • KY4300 (22)
  • KY4400 (32)
  • KYHK15B (32)
  • KYK10 (32)
  • KYK25 (32)
  • KYK35 (32)
  • KYS25 (22)
  • KYS30 (32)
  • NL200 (14)
  • NL250 (34)
  • NL300 (14)
  • NL400 (24)
  • NL920 (34)
  • P25 (23)
  • PB100 (14)
  • PB170 (14)
  • PB250 (14)
  • PB300 (14)
  • PS5 (16)
  • SP0819 (24)
  • SP3019 (24)
  • SP4019 (34)
  • SP4066 (4)
  • THM (34)
  • THM-X (14)
  • THMF-X (14)
  • TN10P (50)
  • TN10U (32)
  • TN15M (34)
  • TN15U (32)
  • TN2000 (26)
  • TN20K (34)
  • TN20P (36)
  • TN30M (36)
  • TN30P (32)
  • TN4000 (26)
  • TN5015 (26)
  • TN5020 (26)
  • TN5105 (34)
  • TN5120 (34)
  • TN6010 (42)
  • TN6025 (58)
  • TN7005 (34)
  • TN7010 (34)
  • TN7015 (34)
  • TN7025 (34)
  • TN7035 (24)
  • TN7105 (28)
  • TN7110 (46)
  • TN7115 (34)
  • TN7125 (26)
  • TN7135 (24)
  • TN8025 (36)
  • TTI15 (16)
  • TTR (14)
  • TTS (14)
  • TTX (14)
  • W00162 (7)
  • WBH10C (43)
  • WBH10P (40)
  • WBH10U (50)
  • WBH20P (32)
  • WBH25P (50)
  • WBH25U (22)
  • WBH30P (40)
  • WBK40U (16)
  • WBK45U (22)
  • WDN00U (56)
  • WDN25U (66)
  • WK05CT (36)
  • WK15CT (26)
  • WK20CT (60)
  • WM15CT (64)
  • WM25CT (54)
  • WM35CT (36)
  • WP05CT (24)
  • WP15CT (54)
  • WP20TT (2)
  • WP25CT (70)
  • WP35CT (36)
  • WS10PT (36)
  • WS25PT (36)
  • WU10HT (40)
  • WU10PT (6)
  • WU25PT (4)
  • X00511 (14)
Hand Of Tool
  • L (58)
  • R (60)
Minimum Axial Groove Diameter
  • 0.5118 (7)
  • 0.512 (1)
  • 0.6299 (11)
  • 0.7283 (2)
  • 0.7874 (16)
  • 0.984 (1)
  • 0.9843 (15)
  • 1.2598 (39)
  • 1.26 (2)
  • 1.3386 (4)
  • 1.5748 (20)
to
Minimum Axial Groove Diameter
  • 13.0 (8)
  • 16.0 (11)
  • 18.5 (2)
  • 20.0 (16)
  • 25.0 (16)
  • 32.0 (41)
  • 34.0 (4)
  • 40.0 (20)
to
Maximum Axial Groove Diameter
  • 9999.0 (20)
to
Maximum Axial Groove Diameter
  • 393.661 (20)
to
Cutting Direction
  • B (44)
  • E (40)
  • S (34)
Rake Angle Style
  • DOUBLE NEGATIVE (50)
  • NEGATIVE-ZERO (12)
  • NEUTRAL (ZERO) (43)
  • POSITIVE-ZERO (13)
Maximum Bore Depth
  • 35.16 (5)
  • 36.33 (1)
  • 42.0 (1)
  • 42.03 (2)
  • 42.21 (7)
  • 50.0 (2)
  • 55.09 (15)
  • 56.11 (10)
  • 60.0 (3)
  • 70.02 (12)
  • 75.04 (20)
  • 76.02 (8)
  • 77.33 (8)
  • 80.0 (6)
  • 80.04 (2)
  • 96.02 (12)
  • 100.0 (4)
to
Maximum Bore Depth
  • 1.3842 (2)
  • 1.3843 (3)
  • 1.43 (1)
  • 1.6535 (1)
  • 1.6547 (2)
  • 1.6618 (7)
  • 1.9685 (2)
  • 2.1689 (15)
  • 2.209 (4)
  • 2.2091 (6)
  • 2.3622 (3)
  • 2.7567 (10)
  • 2.757 (2)
  • 2.954 (1)
  • 2.9543 (19)
  • 2.9929 (8)
  • 3.0445 (8)
  • 3.1496 (4)
  • 3.15 (2)
  • 3.151 (2)
  • 3.7803 (12)
  • 3.937 (4)
to
Boring Bar Material
  • C (8)
  • S (110)
Wiper Insert
  • N (104)
  • Y (70)
Front-End
Clamp Style
  • M (20)
  • N (20)
  • P (16)
  • S (62)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (32)
  • D-DIAMOND/RHOMBIC 55 (26)
  • LT-TRIANGLE LAY DOWN THREAD 60 (14)
  • T-TRIANGLE 60 (14)
  • TN-TOP NOTCH (20)
  • W-TRIGON 80 (12)
Cutting Width
  • 0.5 (12)
  • 0.787 (12)
  • 0.8 (12)
  • 0.889 (12)
  • 0.991 (12)
  • 1.0 (20)
  • 1.041 (12)
  • 1.19 (16)
  • 1.194 (20)
  • 1.199 (6)
  • 1.2 (20)
  • 1.39 (12)
  • 1.397 (12)
  • 1.4 (12)
  • 1.473 (12)
  • 1.5 (20)
  • 1.56 (6)
  • 1.57 (14)
  • 1.575 (20)
  • 1.69 (12)
  • 1.7 (12)
  • 1.702 (12)
  • 1.75 (20)
  • 1.829 (8)
  • 1.94 (12)
  • 1.95 (12)
  • 1.956 (12)
  • 1.981 (8)
  • 2.0 (20)
  • 2.007 (12)
  • 2.2 (20)
  • 2.235 (20)
  • 2.24 (16)
  • 2.25 (16)
  • 2.388 (20)
  • 2.39 (4)
  • 2.464 (8)
  • 2.5 (20)
  • 2.667 (8)
  • 2.74 (12)
  • 2.743 (20)
  • 2.75 (20)
  • 2.794 (8)
  • 2.997 (20)
  • 3.0 (20)
  • 3.099 (8)
  • 3.17 (8)
  • 3.175 (20)
  • 3.18 (6)
  • 3.2 (20)
  • 3.245 (12)
  • 3.25 (8)
  • 3.251 (20)
  • 3.27 (12)
  • 3.32 (4)
  • 3.329 (4)
  • 3.5 (20)
  • 3.607 (8)
  • 3.73 (6)
  • 3.81 (12)
  • 3.84 (12)
  • 3.96 (8)
  • 3.962 (8)
  • 3.974 (4)
  • 3.988 (8)
  • 4.0 (8)
  • 4.24 (4)
  • 4.242 (8)
  • 4.25 (4)
  • 4.3 (8)
  • 4.5 (8)
  • 4.521 (8)
  • 4.699 (8)
  • 4.775 (8)
  • 4.8 (8)
  • 4.801 (8)
  • 4.81 (8)
  • 4.88 (4)
  • 4.95 (8)
to
Cutting Width
  • 0.0197 (12)
  • 0.031 (12)
  • 0.0315 (12)
  • 0.035 (12)
  • 0.039 (12)
  • 0.0394 (20)
  • 0.041 (12)
  • 0.047 (20)
  • 0.0472 (20)
  • 0.055 (12)
  • 0.0551 (12)
  • 0.058 (12)
  • 0.0591 (20)
  • 0.062 (20)
  • 0.0669 (12)
  • 0.067 (12)
  • 0.0689 (20)
  • 0.072 (8)
  • 0.076 (12)
  • 0.0768 (12)
  • 0.077 (12)
  • 0.078 (8)
  • 0.0787 (20)
  • 0.079 (16)
  • 0.0866 (20)
  • 0.088 (20)
  • 0.0886 (16)
  • 0.094 (20)
  • 0.097 (8)
  • 0.0984 (20)
  • 0.105 (8)
  • 0.108 (20)
  • 0.1083 (20)
  • 0.11 (8)
  • 0.118 (20)
  • 0.1181 (20)
  • 0.122 (8)
  • 0.125 (20)
  • 0.126 (20)
  • 0.1278 (12)
  • 0.128 (20)
  • 0.129 (12)
  • 0.131 (4)
  • 0.1378 (20)
  • 0.142 (8)
  • 0.147 (6)
  • 0.15 (12)
  • 0.151 (12)
  • 0.156 (8)
  • 0.157 (8)
  • 0.1574 (8)
  • 0.1575 (8)
  • 0.167 (8)
  • 0.1673 (4)
  • 0.169 (8)
  • 0.1771 (8)
  • 0.1772 (8)
  • 0.178 (8)
  • 0.185 (8)
  • 0.188 (8)
  • 0.189 (8)
  • 0.192 (4)
  • 0.195 (8)