successfully added to cart
View Cart

Notifications

Mark all as read
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Applications
  • Chamfer Turning Chamfer Turning (4)
  • Cut-Off Cut-Off (4)
  • Deep Grooving Deep Grooving (4)
  • Face Grooving Face Grooving (4)
  • Facing Facing (4)
  • Grooving Grooving (10)
  • ID Grooving ID Grooving (6)
  • ID Thread Turning ID Thread Turning (6)
  • Multiple Direction Cutting Multiple Direction Cutting (4)
  • OD Thread Turning OD Thread Turning (10)
  • Plunge Turning Plunge Turning (4)
  • Profiling Profiling (4)
  • TRN Boring TRN Boring (6)
  • Threading Threading (10)
  • Turning Turning (4)
Workpiece Material
  • P Steel (10)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (10)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (10)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (10)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (10)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (10)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (10)
  • M Stainless Steel (10)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (10)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (10)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (10)
  • K Cast Iron (10)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (10)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (10)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (10)
  • N Non-Ferrous Materials (10)
    • N1
      Wrought Aluminum
      (10)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (10)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (9)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (10)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (10)
    • N6
      Carbon, Graphite Composites, CFRP
      (10)
    • N7
      MMC's
      (8)
  • S High-Temp Alloys (10)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (10)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (10)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (10)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (10)
  • H Hardened Materials (8)
    • H1
      Hardened Materials 44-48 HRC
      (8)
    • H2
      Hardened Materials 48-55 HRC
      (8)
    • H3
      Hardened Materials 56-60 HRC
      (8)
    • H4
      Hardened Materials >60 HRC
      (8)
Type of Thread
  • 60 (8)
  • ACME (8)
  • API (8)
  • API RD (4)
  • BSW (4)
  • BUTTRESS (8)
  • M (4)
  • NPT (4)
  • STUB ACME (4)
  • UN (8)
  • UNJ (4)
Cutting Condition
  • Heavily Interrupted Cut (10)
  • Lightly Interrupted Cut (10)
  • Smooth Cut (10)
  • Varying Depth of Cut (10)
Cutting Condition Material
  • H-All (10)
  • K-All (10)
  • M-All (10)
  • N-All (10)
  • P-All (10)
  • S-All (10)
Tool Cutting Edge Angle
  • 90.0 (10)
to
Connection Style
  • KM (4)
Cutting Edges Per Insert
  • 1.0 (8)
  • 2.0 (10)
to
Internal Coolant Capability
Corner configuration
Corner Radius
  • 0.051 (2)
  • 0.057 (2)
  • 0.066 (4)
  • 0.076 (8)
  • 0.08 (4)
  • 0.094 (4)
  • 0.097 (2)
  • 0.1 (4)
  • 0.102 (4)
  • 0.116 (2)
  • 0.117 (2)
  • 0.127 (4)
  • 0.131 (4)
  • 0.132 (4)
  • 0.133 (4)
  • 0.15 (4)
  • 0.155 (4)
  • 0.157 (4)
  • 0.16 (4)
  • 0.165 (8)
  • 0.173 (4)
  • 0.178 (4)
  • 0.19 (8)
  • 0.191 (8)
  • 0.198 (4)
  • 0.2 (4)
  • 0.202 (4)
  • 0.224 (4)
  • 0.235 (4)
  • 0.244 (2)
  • 0.25 (4)
  • 0.251 (4)
  • 0.254 (8)
  • 0.269 (4)
  • 0.282 (4)
  • 0.284 (4)
  • 0.3 (4)
  • 0.315 (6)
  • 0.318 (10)
  • 0.33 (4)
  • 0.34 (4)
  • 0.343 (4)
  • 0.356 (4)
  • 0.404 (4)
  • 0.406 (4)
  • 0.43 (4)
  • 0.445 (8)
  • 0.472 (2)
  • 0.49 (4)
  • 0.508 (4)
  • 0.565 (2)
  • 0.57 (2)
  • 0.572 (10)
  • 0.575 (6)
  • 0.787 (4)
  • 0.826 (2)
  • 0.902 (8)
  • 1.0 (4)
  • 1.194 (4)
  • 1.195 (2)
  • 1.25 (4)
  • 1.5 (4)
  • 1.585 (4)
  • 1.588 (8)
  • 1.59 (2)
  • 1.75 (4)
  • 1.98 (2)
  • 1.981 (4)
  • 2.0 (8)
  • 2.25 (8)
  • 2.388 (8)
  • 2.39 (2)
  • 2.5 (4)
  • 3.175 (4)
  • 3.18 (2)
to
Corner Radius
  • 0.002 (2)
  • 0.0023 (2)
  • 0.0026 (4)
  • 0.003 (8)
  • 0.0031 (4)
  • 0.0037 (4)
  • 0.0038 (2)
  • 0.004 (4)
  • 0.0046 (4)
  • 0.005 (4)
  • 0.0052 (4)
  • 0.0053 (4)
  • 0.0059 (4)
  • 0.006 (4)
  • 0.0062 (4)
  • 0.0065 (8)
  • 0.0068 (4)
  • 0.007 (4)
  • 0.0075 (8)
  • 0.0078 (4)
  • 0.0079 (2)
  • 0.008 (4)
  • 0.0088 (4)
  • 0.0093 (4)
  • 0.0096 (2)
  • 0.0099 (4)
  • 0.01 (8)
  • 0.0106 (4)
  • 0.0111 (4)
  • 0.0112 (4)
  • 0.0118 (4)
  • 0.0124 (4)
  • 0.0125 (10)
  • 0.013 (4)
  • 0.0135 (8)
  • 0.014 (4)
  • 0.0159 (4)
  • 0.016 (4)
  • 0.017 (4)
  • 0.0175 (8)
  • 0.0186 (2)
  • 0.0193 (4)
  • 0.02 (4)
  • 0.0225 (10)
  • 0.031 (4)
  • 0.0325 (2)
  • 0.0355 (8)
  • 0.0394 (4)
  • 0.047 (4)
  • 0.0492 (4)
  • 0.0591 (4)
  • 0.0625 (8)
  • 0.0689 (4)
  • 0.078 (4)
  • 0.0787 (8)
  • 0.0886 (8)
  • 0.094 (8)
  • 0.0984 (4)
  • 0.106 (2)
  • 0.125 (4)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • K2885 (4)
  • K313 (8)
  • K420 (10)
  • K4H (4)
  • K68 (10)
  • KB1345 (8)
  • KB1630 (8)
  • KB5625 (4)
  • KC250 (4)
  • KC5010 (8)
  • KC5025 (10)
  • KC5410 (8)
  • KC710 (8)
  • KC720 (8)
  • KC722 (8)
  • KC730 (8)
  • KC732 (4)
  • KC810 (10)
  • KC850 (10)
  • KC910 (4)
  • KC9110 (8)
  • KC9120 (4)
  • KC9320 (8)
  • KC935 (8)
  • KC950 (8)
  • KCK20 (8)
  • KCK20B (8)
  • KCP10B (8)
  • KCP25B (8)
  • KCU10 (8)
  • KCU25 (9)
  • KD050 (2)
  • KD081 (4)
  • KD100 (6)
  • KD120 (8)
  • KD1425 (4)
  • KT175 (4)
  • KT315 (8)
  • KU10T (8)
  • KU25T (8)
  • KU30T (8)
  • KY3000 (8)
  • THM (4)
  • TN10P (6)
  • TN6010 (8)
  • TN6025 (9)
  • TN7110 (8)
  • WU10HT (2)
  • WU10PT (4)
  • WU25PT (2)
Hand Of Tool
  • L (2)
  • R (2)
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 1.626 (2)
  • 1.874 (2)
  • 2.252 (2)
  • 3.386 (6)
  • 3.5 (2)
  • 5.5 (2)
  • 6.874 (2)
  • 8.252 (2)
  • 8.752 (2)
to
Minimum Axial Groove Diameter
  • 0.0 (4)
  • 41.3 (2)
  • 47.6 (2)
  • 57.2 (2)
  • 86.0 (6)
  • 88.9 (2)
  • 139.7 (2)
  • 174.6 (2)
  • 209.6 (2)
  • 222.3 (2)
to
Maximum Axial Groove Diameter
  • 9999.0 (10)
to
Maximum Axial Groove Diameter
  • 393.661 (10)
to
Cutting Direction
  • E (4)
Rake Angle Style
  • NEUTRAL (ZERO) (4)
Maximum Bore Depth
  • 60.0 (6)
to
Maximum Bore Depth
  • 2.362 (6)
to
Wiper Insert
  • N (10)
Front-End
Clamp Style
  • N (10)
Insert Shape
  • TN-TOP NOTCH (10)
Cutting Width
  • 1.0 (4)
  • 1.19 (2)
  • 1.194 (4)
  • 1.2 (4)
  • 1.5 (4)
  • 1.57 (4)
  • 1.575 (4)
  • 1.75 (4)
  • 1.829 (4)
  • 1.981 (4)
  • 2.0 (4)
  • 2.2 (4)
  • 2.235 (4)
  • 2.24 (2)
  • 2.25 (2)
  • 2.388 (4)
  • 2.39 (2)
  • 2.464 (4)
  • 2.5 (4)
  • 2.667 (4)
  • 2.743 (4)
  • 2.75 (4)
  • 2.794 (4)
  • 2.997 (4)
  • 3.0 (8)
  • 3.099 (4)
  • 3.17 (4)
  • 3.175 (8)
  • 3.18 (2)
  • 3.2 (8)
  • 3.25 (4)
  • 3.251 (4)
  • 3.32 (2)
  • 3.329 (2)
  • 3.5 (8)
  • 3.607 (4)
  • 3.96 (4)
  • 3.962 (4)
  • 3.974 (2)
  • 3.988 (4)
  • 4.0 (8)
  • 4.24 (2)
  • 4.242 (8)
  • 4.25 (2)
  • 4.3 (4)
  • 4.5 (8)
  • 4.521 (4)
  • 4.699 (6)
  • 4.775 (8)
  • 4.78 (2)
  • 4.785 (2)
  • 4.788 (2)
  • 4.8 (4)
  • 4.801 (8)
  • 4.81 (4)
  • 4.88 (2)
  • 4.95 (4)
  • 5.0 (4)
  • 5.004 (6)
  • 5.131 (4)
  • 5.41 (4)
  • 5.5 (4)
  • 5.563 (4)
  • 6.0 (6)
  • 6.35 (6)
  • 6.36 (2)
  • 6.48 (4)
  • 7.01 (2)
  • 7.137 (2)
  • 7.925 (2)
  • 8.001 (1)
  • 8.738 (2)
  • 8.992 (2)
  • 9.525 (2)
  • 9.65 (2)
to
Cutting Width
  • 0.0394 (4)
  • 0.047 (4)
  • 0.0472 (4)
  • 0.0591 (4)
  • 0.062 (4)
  • 0.0689 (4)
  • 0.072 (4)
  • 0.078 (4)
  • 0.0787 (4)
  • 0.079 (2)
  • 0.0866 (4)
  • 0.088 (4)
  • 0.0886 (2)
  • 0.094 (4)
  • 0.097 (4)
  • 0.0984 (4)
  • 0.105 (4)
  • 0.108 (4)
  • 0.1083 (4)
  • 0.11 (4)
  • 0.118 (4)
  • 0.1181 (8)
  • 0.122 (4)
  • 0.125 (8)
  • 0.126 (8)
  • 0.128 (4)
  • 0.131 (2)
  • 0.1378 (8)
  • 0.142 (4)
  • 0.156 (4)
  • 0.157 (4)
  • 0.1574 (8)
  • 0.1575 (8)
  • 0.167 (8)
  • 0.1673 (2)
  • 0.169 (4)
  • 0.1771 (8)
  • 0.1772 (8)
  • 0.178 (4)
  • 0.185 (6)
  • 0.188 (8)
  • 0.189 (8)
  • 0.192 (2)
  • 0.195 (4)
  • 0.1969 (4)
  • 0.197 (6)
  • 0.202 (4)
  • 0.213 (4)
  • 0.2165 (4)
  • 0.2166 (2)
  • 0.219 (4)
  • 0.2362 (6)
  • 0.25 (6)
  • 0.255 (4)
  • 0.276 (2)
  • 0.281 (2)
  • 0.312 (2)
  • 0.315 (1)
  • 0.344 (2)
  • 0.354 (2)
  • 0.375 (2)
  • 0.38 (2)
to
Insert Size
  • 3 (4)
  • 4 (4)
  • 5 (2)
Maximum Cutting Depth
  • 5.33 (2)
  • 7.47 (2)
to
Maximum Cutting Depth
  • 0.21 (2)
  • 0.294 (2)
to
Insert Geometry
Cutting Tool Material
  • B H (8)
  • B L (4)
  • C N (8)
  • D P (6)
  • H T (8)
  • H W (10)
Back-End
Connection Type
  • TAPER SHANK (4)
System Size
  • KM63TS (4)
Back-End Diameter
  • 2.4803 (10)
to
Back-End Diameter
  • 63.0 (10)
to
other
Platform
  • KM63 (9)
Tool Unit
  • I (10)
  • M (10)
Display Configurable Products
  • false (10)
Over All Length [L]
  • 60.0 (10)
to
Over All Length [L]
  • 2.362 (6)
  • 2.3622 (4)
to
Insert Hand
  • L (5)
  • R (5)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

KM63TS™ Cutting Units

Top Notch™ Threading and Grooving • KM40TS™ Cutting Units
(4 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension Gage Insert Weight Kilograms Weight Pounds
2265412 KM63TSNSR3 KM63TSNSR3 60.0000 2.362 43.0000 1.692 NG3R 1.02 2.26
    List price:
    $320.39 /each.
    Your price::
    Qty
    2265413 KM63TSNSL3 KM63TSNSL3 60.0000 2.362 43.0000 1.692 NG3L 1.02 2.26
      List price:
      $320.39 /each.
      Your price::
      Qty
      2265414 KM63TSNSR4 KM63TSNSR4 60.0000 2.362 43.0000 1.692 NG4R 1.06 2.34
        List price:
        $320.39 /each.
        Your price::
        Qty
        2265415 KM63TSNSL4 KM63TSNSL4 60.0000 2.362 43.0000 1.692 NG4L 1.06 2.34
          List price:
          $320.39 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is not available
          Replacement Product This item may be available through a distributor
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          KM63TS™ Cutting Units

          Top Notch™ Threading and Grooving • KM40TS™ Cutting Units
          (6 Products)
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [L1] Tool Length [L1] Tool Length [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms Weight Pounds
          2265406 KM63TSNER3 KM63TSNER3 60.0000 2.362 43.0000 1.692 86.0000 3.386 NG3L 1.19 2.63
            List price:
            $320.39 /each.
            Your price::
            Qty
            2265407 KM63TSNEL3 KM63TSNEL3 60.0000 2.362 43.0000 1.692 86.0000 3.386 NG3R 1.19 2.63
              List price:
              $320.39 /each.
              Your price::
              Qty
              2265408 KM63TSNER4 KM63TSNER4 60.0000 2.362 43.0000 1.692 86.0000 3.386 NG4L 1.21 2.66
                List price:
                $320.39 /each.
                Your price::
                Qty
                2265409 KM63TSNEL4 KM63TSNEL4 60.0000 2.362 43.0000 1.692 86.0000 3.386 NG4R 1.21 2.66
                  List price:
                  $320.39 /each.
                  Your price::
                  Qty
                  2265411 KM63TSNEL5 KM63TSNEL5 60.0000 2.362 43.0000 1.692 86.0000 3.386 NG5R 1.18 2.60
                    List price:
                    $320.39 /each.
                    Your price::
                    Qty
                    2265410 KM63TSNER5 KM63TSNER5 60.0000 2.362 43.0000 1.692 86.0000 3.386 NG5L 1.15 2.55
                      Your price::
                      Qty
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is not available
                      Replacement Product This item may be available through a distributor
                      Qty

                      Sold in pkg. of

                      product-image
                      Please adjust the following properties from

                      ISO Catalog Number

                      ANSI Catalog Number

                      to find similar products.
                      If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                      You are about to create a duplicate . Do you want to proceed?
                      You are about to delete Do you want to proceed?
                      What would you like to rename your to?
                      Please enter a valid name
                      Please enter a name for the duplicate
                      Please enter a valid name
                      You are about to add to your My Solutions page. Do you want to proceed?
                      Please enter a valid name
                      Send a copy of

                      Please enter a valid Email
                      Please enter a valid name

                      We have found the following CAD Drawings

                      Select the files you are looking for and download them all at once

                      You should be logged to see your dashboard information
                      The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                      item(s) successfully added to the cart
                      View Cart