successfully added to cart
View Cart

Notifications

Mark all as read
Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Applications
  • Facing Facing (32)
  • Multiple Direction Cutting Multiple Direction Cutting (32)
  • Profiling Profiling (28)
  • TRN Boring TRN Boring (28)
  • Turning Turning (32)
Workpiece Material
  • P Steel (32)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (32)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (32)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (32)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (32)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (32)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (32)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (32)
  • M Stainless Steel (32)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (32)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (32)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (32)
  • K Cast Iron (32)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (32)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (32)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (32)
  • N Non-Ferrous Materials (32)
    • N1
      Wrought Aluminum
      (32)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (32)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (32)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (32)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (32)
    • N6
      Carbon, Graphite Composites, CFRP
      (32)
    • N7
      MMC's
      (32)
  • S High-Temp Alloys (32)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (32)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (32)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (32)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (32)
  • H Hardened Materials (32)
    • H1
      Hardened Materials 44-48 HRC
      (32)
    • H2
      Hardened Materials 48-55 HRC
      (32)
    • H3
      Hardened Materials 56-60 HRC
      (32)
    • H4
      Hardened Materials >60 HRC
      (32)
Cutting Condition
  • Heavily Interrupted Cut (32)
  • Interrupted (32)
  • Lightly Interrupted Cut (32)
  • Smooth Cut (32)
  • Varying Depth of Cut (32)
Cutting Condition Material
  • H-All (32)
  • K-All (32)
  • K1 (16)
  • M-All (32)
  • N-All (32)
  • P-All (32)
  • S-All (32)
  • S2 (32)
  • S4 (32)
Tool Cutting Edge Angle
  • 93.0 (16)
  • 95.0 (16)
to
Connection Style
  • KM (32)
Cutting Edges Per Insert
  • 1.0 (32)
  • 2.0 (32)
  • 4.0 (32)
  • 8.0 (16)
to
Corner configuration
Corner Radius
  • 0.1 (32)
  • 0.102 (32)
  • 0.2 (32)
  • 0.203 (32)
  • 0.397 (32)
  • 0.4 (32)
  • 0.406 (16)
  • 0.792 (16)
  • 0.794 (32)
  • 0.8 (32)
  • 1.19 (16)
  • 1.191 (32)
  • 1.2 (32)
  • 1.587 (16)
  • 1.588 (32)
  • 1.6 (32)
  • 2.381 (16)
to
Corner Radius
  • 0.004 (32)
  • 0.008 (32)
  • 0.0083 (16)
  • 0.0156 (32)
  • 0.016 (32)
  • 0.031 (32)
  • 0.0312 (32)
  • 0.0313 (32)
  • 0.0315 (16)
  • 0.0469 (32)
  • 0.047 (32)
  • 0.0472 (16)
  • 0.0625 (32)
  • 0.063 (16)
  • 0.0938 (16)
  • 0.1563 (16)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (32)
  • 241 (16)
  • CL4 (16)
  • CM2 (32)
  • CM3 (16)
  • CM4 (16)
  • CPX (32)
  • CW2 (16)
  • CW2015 (32)
  • CW5025 (32)
  • GX (16)
  • HK1500 (16)
  • HT2 (16)
  • HTX (16)
  • K060 (32)
  • K090 (32)
  • K1 (16)
  • K10M (32)
  • K10P (32)
  • K10U (32)
  • K15U (32)
  • K20K (32)
  • K21 (16)
  • K25M (32)
  • K25P (32)
  • K313 (32)
  • K35P (16)
  • K420 (32)
  • K45 (32)
  • K68 (32)
  • KB1340 (16)
  • KB1345 (32)
  • KB1610 (32)
  • KB1625 (32)
  • KB1630 (32)
  • KB5610 (32)
  • KB5625 (32)
  • KB5630 (32)
  • KB9610 (32)
  • KB9640 (16)
  • KBH10 (32)
  • KBH10B (32)
  • KBH20 (32)
  • KBH20B (32)
  • KBK35 (16)
  • KC210 (32)
  • KC250 (32)
  • KC5010 (32)
  • KC5025 (32)
  • KC5410 (32)
  • KC5510 (32)
  • KC5525 (32)
  • KC710 (16)
  • KC720 (32)
  • KC722 (16)
  • KC730 (32)
  • KC7310 (32)
  • KC732 (32)
  • KC8050 (32)
  • KC810 (32)
  • KC850 (32)
  • KC9010 (32)
  • KC9025 (32)
  • KC910 (32)
  • KC9105 (32)
  • KC9110 (32)
  • KC9120 (32)
  • KC9125 (32)
  • KC9140 (32)
  • KC9145 (32)
  • KC9215 (32)
  • KC9225 (32)
  • KC9240 (32)
  • KC9240NEW (32)
  • KC9245 (32)
  • KC9315 (32)
  • KC9320 (32)
  • KC9325 (32)
  • KC935 (32)
  • KC950 (32)
  • KC990 (32)
  • KCD25 (16)
  • KCK05 (32)
  • KCK05B (32)
  • KCK15 (32)
  • KCK15B (32)
  • KCK20 (32)
  • KCK20B (32)
  • KCM15 (32)
  • KCM15B (32)
  • KCM25 (32)
  • KCM25B (32)
  • KCM35 (32)
  • KCM35B (16)
  • KCP05 (32)
  • KCP05B (32)
  • KCP10 (32)
  • KCP10B (32)
  • KCP25 (32)
  • KCP25B (32)
  • KCP30 (32)
  • KCP30B (32)
  • KCP40 (32)
  • KCP40B (32)
  • KCPK05 (32)
  • KCS10 (16)
  • KCS10B (32)
  • KCU10 (32)
  • KCU25 (32)
  • KD050 (32)
  • KD081 (32)
  • KD100 (32)
  • KD120 (32)
  • KD1400 (32)
  • KD1405 (32)
  • KD1425 (32)
  • KM1 (16)
  • KMF (16)
  • KT1120 (16)
  • KT125 (32)
  • KT150 (32)
  • KT175 (32)
  • KT315 (32)
  • KT325 (16)
  • KTP10 (16)
  • KU10T (32)
  • KU30T (32)
  • KY1310 (32)
  • KY1320 (32)
  • KY1540 (32)
  • KY1615 (32)
  • KY2000 (32)
  • KY2100 (32)
  • KY3000 (32)
  • KY3400 (32)
  • KY3500 (32)
  • KY4000 (16)
  • KY4300 (32)
  • KY4400 (32)
  • KYHK15B (32)
  • KYK10 (32)
  • KYK25 (32)
  • KYK35 (32)
  • KYS25 (32)
  • KYS30 (32)
  • NL200 (16)
  • NL250 (32)
  • NL300 (16)
  • NL400 (16)
  • NL920 (32)
  • P25 (16)
  • PB100 (16)
  • PB170 (16)
  • PB250 (16)
  • PB300 (16)
  • PS5 (16)
  • SP0819 (16)
  • SP3019 (16)
  • SP4019 (32)
  • THM (16)
  • THM-X (16)
  • THMF-X (16)
  • TN10P (32)
  • TN10U (32)
  • TN15M (32)
  • TN15U (32)
  • TN2000 (16)
  • TN20K (32)
  • TN20P (32)
  • TN30M (32)
  • TN30P (32)
  • TN4000 (16)
  • TN5015 (16)
  • TN5020 (16)
  • TN5105 (32)
  • TN5120 (32)
  • TN6010 (32)
  • TN6025 (16)
  • TN7005 (32)
  • TN7010 (32)
  • TN7015 (32)
  • TN7025 (32)
  • TN7035 (16)
  • TN7105 (16)
  • TN7110 (16)
  • TN7115 (32)
  • TN7125 (16)
  • TN7135 (16)
  • TN8025 (32)
  • TTI15 (16)
  • TTR (16)
  • TTS (16)
  • TTX (16)
  • WBH10C (32)
  • WBH10P (32)
  • WBH10U (32)
  • WBH20P (32)
  • WBH25P (32)
  • WBH25U (32)
  • WBH30P (32)
  • WBK40U (16)
  • WBK45U (32)
  • WDN00U (32)
  • WDN25U (32)
  • WK05CT (32)
  • WK15CT (16)
  • WK20CT (32)
  • WM15CT (32)
  • WM25CT (32)
  • WM35CT (32)
  • WP05CT (16)
  • WP15CT (32)
  • WP25CT (32)
  • WP35CT (32)
  • WS10PT (32)
  • WS25PT (32)
  • WU10HT (32)
  • X00511 (16)
Hand Of Tool
  • L (16)
  • R (16)
Minimum Axial Groove Diameter
  • 1.2598 (6)
  • 1.26 (2)
  • 1.5748 (7)
  • 1.575 (1)
  • 1.9685 (6)
  • 1.969 (2)
  • 2.4803 (8)
to
Minimum Axial Groove Diameter
  • 32.0 (8)
  • 40.0 (8)
  • 50.0 (8)
  • 63.0 (8)
to
Cutting Direction
  • B (16)
  • E (16)
Rake Angle Style
  • DOUBLE NEGATIVE (32)
Maximum Bore Depth
  • 45.17 (2)
  • 50.45 (2)
  • 62.07 (4)
  • 77.14 (4)
  • 88.23 (4)
  • 104.4 (4)
  • 112.07 (4)
  • 117.14 (4)
  • 149.4 (4)
to
Maximum Bore Depth
  • 1.778 (2)
  • 1.986 (2)
  • 2.444 (4)
  • 3.037 (4)
  • 3.474 (4)
  • 4.11 (4)
  • 4.412 (4)
  • 4.612 (4)
  • 5.882 (4)
to
Boring Bar Material
  • S (32)
Wiper Insert
  • N (32)
  • Y (32)
Front-End
Clamp Style
  • M (32)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (16)
  • D-DIAMOND/RHOMBIC 55 (16)
Insert Geometry
Cutting Tool Material
  • B H (32)
  • B L (32)
  • C A (32)
  • C N (32)
  • D P (32)
  • H T (32)
  • H W (32)
Back-End
Connection Type
  • TAPER SHANK (32)
System Size
  • KM63TS (32)
Back-End Diameter
  • 2.48 (4)
  • 2.4803 (28)
to
Back-End Diameter
  • 63.0 (32)
to
other
Platform
  • KM63 (29)
Tool Unit
  • M (32)
Display Configurable Products
  • false (32)
Over All Length [L]
  • 80.0 (4)
  • 90.0 (4)
  • 100.0 (4)
  • 125.0 (8)
  • 140.0 (8)
  • 170.0 (4)
to
Over All Length [L]
  • 3.1496 (4)
  • 3.5433 (4)
  • 3.937 (4)
  • 4.921 (2)
  • 4.9213 (6)
  • 5.5118 (7)
  • 5.512 (1)
  • 6.6929 (4)
to
Insert Hand
  • N (32)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

KM63TS™ Internal Cutting Units

M-Clamping
(16 Products)
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
2265355 KM63TSS25FMDUNR15 KM63TSS25FMDUNR15 32.0000 1.259 17.0000 .6693 45.1700 1.778 80.0000 3.149 DN..150408/DN..432 0.95 2.09
    Your price::
    Qty
    2265356 KM63TSS25FMDUNL15 KM63TSS25FMDUNL15 32.0000 1.259 17.0000 .6693 45.1700 1.778 80.0000 3.149 DN..150408/DN..432 0.94 2.08
      Your price::
      Qty
      2265359 KM63TSS32GMDUNR15 KM63TSS32GMDUNR15 40.0000 1.574 22.0000 .8661 62.0700 2.444 90.0000 3.543 DN..150408/DN..432 1.05 2.30
        Your price::
        Qty
        2265353 KM63TSS25KMDUNR15 KM63TSS25KMDUNR15 32.0000 1.260 17.0000 .6690 88.2300 3.474 125.0000 4.921 DNMA150408/DNMA432 1.13 2.50
          List price:
          $517.55 /each.
          Your price::
          Qty
          2265354 KM63TSS25KMDUNL15 KM63TSS25KMDUNL15 32.0000 1.259 17.0000 .6693 88.2300 3.474 125.0000 4.921 DN..150408/DN..432 1.13 2.50
            List price:
            $517.55 /each.
            Your price::
            Qty
            2265357 KM63TSS32LMDUNR15 KM63TSS32LMDUNR15 40.0000 1.574 22.0000 .8661 112.0700 4.412 140.0000 5.511 DN..150408/DN..432 1.36 2.99
              List price:
              $517.55 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is not available
              Replacement Product This item may be available through a distributor
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              KM63TS™ Internal Cutting Units

              M-Clamping
              (16 Products)
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
              2265327 KM63TSS25KMCLNR12 KM63TSS25KMCLNR12 32.0000 1.259 17.0000 .6693 88.2300 3.474 125.0000 4.921 CN..120408/CN..432 1.14 2.52
                List price:
                $501.10 /each.
                Your price::
                Qty
                2265328 KM63TSS25KMCLNL12 KM63TSS25KMCLNL12 32.0000 1.260 17.0000 .6690 88.2300 3.474 125.0000 4.921 CNMA120408/CNMA432 1.14 2.52
                  List price:
                  $501.10 /each.
                  Your price::
                  Qty
                  2265329 KM63TSS25FMCLNR12 KM63TSS25FMCLNR12 32.0000 1.259 17.0000 .6693 50.4500 1.986 80.0000 3.149 CN..120408/CN..432 0.90 1.99
                    List price:
                    $501.10 /each.
                    Your price::
                    Qty
                    2265330 KM63TSS25FMCLNL12 KM63TSS25FMCLNL12 32.0000 1.259 17.0000 .6693 50.4500 1.986 80.0000 3.149 CN..120408/CN..432 0.90 1.99
                      List price:
                      $501.10 /each.
                      Your price::
                      Qty
                      2265331 KM63TSS32LMCLNR12 KM63TSS32LMCLNR12 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 CNMA120408/CNMA432 1.37 3.01
                        List price:
                        $501.10 /each.
                        Your price::
                        Qty
                        2265332 KM63TSS32LMCLNL12 KM63TSS32LMCLNL12 40.0000 1.574 22.0000 .8661 112.0700 4.412 140.0000 5.511 CN..120408/CN..432 1.37 3.01
                          List price:
                          $501.10 /each.
                          Your price::
                          Qty
                          List price:
                          Discount: %
                          Your price::
                          Replacement This item is not available
                          Replacement Product This item may be available through a distributor
                          Qty

                          Sold in pkg. of

                          product-image
                          Please adjust the following properties from

                          ISO Catalog Number

                          ANSI Catalog Number

                          to find similar products.
                          If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                          You are about to create a duplicate . Do you want to proceed?
                          You are about to delete Do you want to proceed?
                          What would you like to rename your to?
                          Please enter a valid name
                          Please enter a name for the duplicate
                          Please enter a valid name
                          You are about to add to your My Solutions page. Do you want to proceed?
                          Please enter a valid name
                          Send a copy of

                          Please enter a valid Email
                          Please enter a valid name

                          We have found the following CAD Drawings

                          Select the files you are looking for and download them all at once

                          You should be logged to see your dashboard information
                          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                          item(s) successfully added to the cart
                          View Cart