Quick Order Page
successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu

D-Clamping

Select Filters
Filters
Filters
View filters in
Metric
Inch
Key Filters
Workpiece Material
Workpiece Material
  • P Steel (6)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (6)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (6)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (6)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (6)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (6)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (6)
  • M Stainless Steel (6)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (6)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (6)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (6)
  • K Cast Iron (6)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (6)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (6)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (6)
  • N Non-Ferrous Materials (6)
    • N1
      Wrought Aluminum
      (6)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (6)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (3)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (6)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (6)
    • N6
      Carbon, Graphite Composites, CFRP
      (6)
    • N7
      MMC's
      (6)
  • S High-Temp Alloys (6)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (6)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (6)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (6)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (6)
  • H Hardened Materials (6)
    • H1
      Hardened Materials 44-48 HRC
      (6)
    • H2
      Hardened Materials 48-55 HRC
      (6)
    • H3
      Hardened Materials 56-60 HRC
      (6)
    • H4
      Hardened Materials >60 HRC
      (6)
Applications
Applications
  • Facing Facing (6)
  • ID Facing ID Facing (6)
  • Multiple Direction Cutting Multiple Direction Cutting (6)
  • TRN Boring TRN Boring (6)
  • Turning Turning (4)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (6)
  • Interrupted (6)
  • Lightly Interrupted Cut (6)
  • Smooth Cut (6)
  • Varying Depth of Cut (6)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 93.0 (2)
  • 95.0 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (4)
  • 2.0 (6)
  • 4.0 (6)
  • 8.0 (4)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Corner configuration
Corner Radius
Corner Radius
  • 0.004 in (4)
  • 0.008 in (3)
  • 0.014 in (1)
  • 0.016 in (6)
  • 0.031 in (6)
  • 0.047 in (6)
  • 0.062 in (2)
  • 0.063 in (6)
  • 0.094 in (3)
  • 0.095 in (2)
  • 0.126 in (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (4)
  • 0.2 mm (3)
  • 0.351 mm (1)
  • 0.4 mm (6)
  • 0.8 mm (6)
  • 1.201 mm (6)
  • 1.576 mm (2)
  • 1.6 mm (6)
  • 2.375 mm (3)
  • 2.401 mm (2)
  • 3.2 mm (2)
Corner Radius Min to Corner Radius Max
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (6)
  • CM2 (6)
  • CPX (6)
  • CW2015 (6)
  • CW5025 (6)
  • K090 (6)
  • K10M (6)
  • K10P (6)
  • K20K (6)
  • K25M (6)
  • K313 (6)
  • K68 (6)
  • KC5010 (6)
  • KC5025 (6)
  • KC5410 (6)
  • KC5510 (6)
  • KC7310 (6)
  • KC8050 (6)
  • KC810 (6)
  • KC850 (6)
  • KC9010 (6)
  • KC9025 (6)
  • KC910 (6)
  • KC9105 (6)
  • KC9110 (6)
  • KC9120 (6)
  • KC9125 (6)
  • KC9140 (6)
  • KC9145 (6)
  • KC9215 (6)
  • KC9225 (6)
  • KC9240 (6)
  • KC9240NEW (6)
  • KC9245 (6)
  • KC9315 (6)
  • KC9320 (6)
  • KC9325 (6)
  • KC935 (6)
  • KC950 (6)
  • KC990 (6)
  • KCK05 (6)
  • KCK05B (6)
  • KCK15 (6)
  • KCK15B (6)
  • KCK20 (6)
  • KCK20B (6)
  • KCM15 (6)
  • KCM15B (6)
  • KCM25 (6)
  • KCM25B (6)
  • KCM35 (6)
  • KCP05 (6)
  • KCP10 (6)
  • KCP10B (6)
  • KCP25 (6)
  • KCP25B (6)
  • KCP25C (6)
  • KCP30 (6)
  • KCP30B (6)
  • KCP40 (6)
  • KCP40B (6)
  • KCPK05 (6)
  • KCS10B (6)
  • KCU10 (6)
  • KCU25 (6)
  • KU30T (6)
  • KY1320 (6)
  • KY1615 (6)
  • KY3000 (6)
  • KY3500 (6)
  • KY4400 (6)
  • KYHK15B (6)
  • KYK35 (6)
  • NL250 (6)
  • NL920 (6)
  • SP0819 (6)
  • SP3019 (6)
  • TN10P (6)
  • TN15M (6)
  • TN20K (6)
  • TN20P (6)
  • TN30M (6)
  • TN30P (6)
  • TN5015 (6)
  • TN5120 (6)
  • TN7010 (6)
  • TN7015 (6)
  • TN7025 (6)
  • TN7110 (6)
  • TN7115 (6)
  • TN8025 (6)
  • WK05CT (6)
  • WK20CT (6)
  • WM15CT (6)
  • WM25CT (6)
  • WM35CT (6)
  • WP15CT (6)
  • WP25CT (6)
  • WP35CT (6)
  • WS10PT (6)
Hand Of Tool
Hand Of Tool
  • L (3)
  • R (3)
Wiper Insert
Wiper Insert
  • N (6)
  • Y (4)
F Dimension
F Dimension
  • 17.0 mm (2)
  • 27.0 mm (4)
F Dimension Min to F Dimension Max
F Dimension
F Dimension
  • 0.669 in (2)
  • 1.063 in (4)
F Dimension Min to F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 32.0 mm (2)
  • 50.0 mm (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.26 in (2)
  • 1.969 in (4)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (4)
  • E (2)
Maximum Bore Depth
Maximum Bore Depth
  • 2.835 in (2)
  • 4.488 in (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 72.0 mm (2)
  • 114.0 mm (4)
Maximum Bore Depth Min to Maximum Bore Depth Max
Front-End
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (4)
  • D-DIAMOND/RHOMBIC 55 (2)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
  • B H (4)
  • B L (4)
  • C A (6)
  • C N (6)
  • D P (4)
  • H T (4)
  • H W (6)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

PSC63

Internal Cutting Units • D-Clamping
(4 Products)
  • Shank - PSCShank - PSC
  • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
  • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
  • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
6339684 PSC63S25HDCLNL12 PSC63S25HDCLNL12 25.0000 .9843 100.0000 3.937 72.0000 2.834 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 1.29
    List price:
    $561,10 /each.
    Your price::
    Qty
    6339689 PSC63S25HDCLNR12 PSC63S25HDCLNR12 25.0000 .9843 100.0000 3.937 72.0000 2.834 17.0000 .6693 32.0000 1.259 CN..120408/CN..432 1.29
      List price:
      $561,10 /each.
      Your price::
      Qty
      6339685 PSC63S40LDCLNL16 PSC63S40LDCLNL16 40.0000 1.574 140.0000 5.511 114.0000 4.488 27.0000 1.063 50.0000 1.968 CN..160612/CN..543 2.07
        List price:
        $561,10 /each.
        Your price::
        Qty
        6339690 PSC63S40LDCLNR16 PSC63S40LDCLNR16 40.0000 1.574 140.0000 5.511 114.0000 4.488 27.0000 1.063 50.0000 1.968 CN..160612/CN..543 2.07
          List price:
          $561,10 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is no longer available
          Replacement Product Please contact customer service for assistance
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          PSC63

          Cutting Units • D-Clamping
          (2 Products)
          • Shank - PSCShank - PSC
          • Manufacturer’s Specs: ISO 26623Manufacturer’s Specs: ISO 26623
          • Coolant: Through Coolant 80 bar MaximumCoolant: Through Coolant 80 bar Maximum
          • Coolant: Through Coolant 1200 psi MaximumCoolant: Through Coolant 1200 psi Maximum
          View Products
          SAP Material Number ISO Catalog Number ANSI Catalog Number [D2] Body Diameter 1 Workpiece Side [D2] Body Diameter 1 Workpiece Side [L1] Tool Length [L1] Tool Length [L4] Maximum Boring Depth [L4] Maximum Boring Depth [F] F Dimension [F] F Dimension [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter Gage Insert Weight Kilograms
          6341449 PSC63S40LDDUNL1506 PSC63S40LDDUNL1506 40.0000 1.574 140.0000 5.511 114.0000 4.488 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.70
            List price:
            $561,10 /each.
            Your price::
            Qty
            6341450 PSC63S40LDDUNR1506 PSC63S40LDDUNR1506 40.0000 1.574 140.0000 5.511 114.0000 4.488 27.0000 1.063 50.0000 1.968 DN..150608/DN..442 1.70
              List price:
              $561,10 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              product-image
              Please adjust the following properties from

              ISO Catalog Number

              ANSI Catalog Number

              to find similar products.
              You are about to create a duplicate . Do you want to proceed?
              You are about to delete Do you want to proceed?
              What would you like to rename your to?
              Please enter a valid name
              Please enter a name for the duplicate
              Please enter a valid name
              You are about to add to your My Solutions page. Do you want to proceed?
              Please enter a valid name
              Send a copy of

              Please enter a valid Email
              Please enter a valid name

              The following CAD files are available

              Please select a file to download

              You should be logged to see your dashboard information
              Session expired due to inactivity, please login again
              The product/s () you were trying to add to the cart is/are not available, please contact customer service.
              item(s) successfully added to the cart
              View Cart
              DOWNLOAD TYPE:



              DOWNLOAD TYPE:



              . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

              Name SAP Material Number ISO Catalog Number