TopGroove™ - Boring Bars

Select Filters
Filters
    View filters in
    Metric
    Inch
    Key Filters
    Workpiece Material
    Workpiece Material
    • P Steel (44)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(44)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(44)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(44)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(44)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(44)
    • M Stainless Steel (44)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(44)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(44)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(44)
    • K Cast Iron (44)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(44)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(44)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(44)
    • N Non-Ferrous Materials (44)
      • N1
        Wrought Aluminum (44)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(44)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(44)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (44)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (44)
      • N6
        Carbon, Graphite Composites, CFRP (44)
      • N7
        MMC's (44)
    • S High-Temp Alloys (44)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(44)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(44)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(44)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(44)
    • H Hardened Materials (43)
      • H1
        Hardened Materials 44-48 HRC(43)
      • H2
        Hardened Materials 48-55 HRC(43)
      • H3
        Hardened Materials 56-60 HRC(40)
      • H4
        Hardened Materials >60 HRC(40)
    Select All Star
    • DE (2)
    • IN (2)
    • US (15)
    Applications
    Applications
    • GroovingGrooving (3)
    • ID GroovingID Grooving (41)
    • ID Thread TurningID Thread Turning (44)
    • ThreadingThreading (1)
    Type of Thread
    Type of Thread
    • 60 (43)
    • ACME (23)
    • API RD (17)
    • BSW (8)
    • BUTTRESS (9)
    • STUB ACME (17)
    • UN (35)
    • UNJ (8)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (38)
    • Lightly Interrupted Cut (38)
    • Smooth Cut (43)
    • Varying Depth of Cut (38)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (43)
    • 2.0 (39)
    Cutting Edges Per Insert MintoCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 4.921 in(1)
    • 5.905 in(1)
    • 5.9055 in(1)
    • 5.906 in(3)
    • 6.0 in(1)
    • 7.0866 in(2)
    • 7.874 in(4)
    • 8.0 in(3)
    • 9.8425 in(2)
    • 10.0 in(5)
    • 11.811 in(3)
    • 12.0 in(6)
    • 13.7795 in(1)
    • 14.0 in(7)
    • 16.0 in(4)
    Over All Length [L] MintoOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 125.0 mm(1)
    • 150.0 mm(5)
    • 152.4 mm(1)
    • 180.0 mm(2)
    • 200.0 mm(4)
    • 203.2 mm(3)
    • 250.0 mm(2)
    • 254.0 mm(5)
    • 300.0 mm(3)
    • 304.8 mm(6)
    • 350.0 mm(1)
    • 355.6 mm(7)
    • 406.4 mm(4)
    Over All Length [L] MintoOver All Length [L] Max
    Corner configuration
    Corner Radius
    Corner Radius
    • 0.003 in(30)
    • 0.004 in(25)
    • 0.006 in(2)
    • 0.007 in(30)
    • 0.008 in(43)
    • 0.009 in(8)
    • 0.01 in(16)
    • 0.012 in(8)
    • 0.013 in(22)
    • 0.014 in(17)
    • 0.016 in(17)
    • 0.02 in(16)
    • 0.023 in(22)
    • 0.03 in(16)
    • 0.031 in(33)
    • 0.039 in(33)
    • 0.047 in(33)
    • 0.049 in(25)
    • 0.059 in(33)
    • 0.062 in(17)
    • 0.063 in(22)
    • 0.069 in(33)
    • 0.078 in(17)
    • 0.079 in(19)
    • 0.089 in(17)
    • 0.094 in(20)
    • 0.098 in(5)
    • 0.125 in(5)
    Corner Radius MintoCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.075 mm(30)
    • 0.1 mm(25)
    • 0.15 mm(2)
    • 0.175 mm(30)
    • 0.2 mm(43)
    • 0.225 mm(8)
    • 0.25 mm(16)
    • 0.3 mm(8)
    • 0.325 mm(22)
    • 0.35 mm(17)
    • 0.4 mm(17)
    • 0.5 mm(16)
    • 0.575 mm(22)
    • 0.75 mm(16)
    • 0.775 mm(33)
    • 1.0 mm(33)
    • 1.2 mm(33)
    • 1.25 mm(25)
    • 1.5 mm(33)
    • 1.575 mm(17)
    • 1.6 mm(22)
    • 1.75 mm(33)
    • 1.975 mm(17)
    • 2.0 mm(19)
    • 2.25 mm(17)
    • 2.4 mm(20)
    • 2.5 mm(5)
    • 3.175 mm(5)
    Corner Radius MintoCorner Radius Max
    Application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • THM (33)
    • TN6010 (43)
    • TN6025 (44)
    • WU10HT (8)
    • WU10PT (13)
    • WU25PT (9)
    Hand Of Tool
    Hand Of Tool
    • L (18)
    • R (26)
    F Dimension
    F Dimension
    • 6.553 mm(2)
    • 7.0 mm(2)
    • 10.312 mm(1)
    • 11.0 mm(4)
    • 11.1 mm(2)
    • 12.7 mm(2)
    • 13.0 mm(2)
    • 14.27 mm(1)
    • 14.275 mm(1)
    • 16.256 mm(2)
    • 17.0 mm(4)
    • 17.475 mm(2)
    • 17.48 mm(2)
    • 19.431 mm(1)
    • 22.0 mm(2)
    • 22.225 mm(2)
    • 25.4 mm(2)
    • 27.0 mm(3)
    • 31.75 mm(3)
    • 32.537 mm(1)
    • 34.925 mm(2)
    • 35.0 mm(1)
    F Dimension MintoF Dimension Max
    F Dimension
    F Dimension
    • 0.258 in(2)
    • 0.276 in(2)
    • 0.406 in(1)
    • 0.433 in(2)
    • 0.4331 in(2)
    • 0.437 in(2)
    • 0.5 in(2)
    • 0.5118 in(2)
    • 0.562 in(2)
    • 0.64 in(2)
    • 0.669 in(4)
    • 0.688 in(4)
    • 0.765 in(1)
    • 0.8661 in(2)
    • 0.875 in(2)
    • 1.0 in(2)
    • 1.063 in(3)
    • 1.25 in(3)
    • 1.281 in(1)
    • 1.375 in(2)
    • 1.378 in(1)
    F Dimension MintoF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 11.176 mm(2)
    • 11.5 mm(2)
    • 18.5 mm(2)
    • 18.542 mm(2)
    • 20.32 mm(1)
    • 22.0 mm(2)
    • 25.4 mm(2)
    • 26.0 mm(2)
    • 28.575 mm(1)
    • 28.58 mm(1)
    • 34.0 mm(4)
    • 34.92 mm(2)
    • 34.925 mm(2)
    • 44.0 mm(2)
    • 44.45 mm(2)
    • 50.8 mm(2)
    • 54.0 mm(3)
    • 57.15 mm(3)
    • 60.325 mm(1)
    • 63.5 mm(3)
    • 69.85 mm(2)
    • 70.0 mm(1)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.44 in(2)
    • 0.453 in(2)
    • 0.728 in(2)
    • 0.73 in(2)
    • 0.8 in(1)
    • 0.8661 in(2)
    • 1.0 in(2)
    • 1.0236 in(2)
    • 1.125 in(2)
    • 1.339 in(4)
    • 1.375 in(4)
    • 1.7323 in(2)
    • 1.75 in(2)
    • 2.0 in(2)
    • 2.126 in(3)
    • 2.25 in(3)
    • 2.375 in(1)
    • 2.5 in(3)
    • 2.75 in(2)
    • 2.7559 in(1)
    Minimum Axial Groove Diameter MintoMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 393.661 in(43)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 9999.0 mm(43)
    Maximum Axial Groove Diameter MintoMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (4)
    • S (40)
    Maximum Bore Depth
    Maximum Bore Depth
    • 1.231 in(1)
    • 1.2323 in(1)
    • 1.29 in(1)
    • 1.5 in(1)
    • 1.88 in(2)
    • 2.0 in(2)
    • 2.5 in(3)
    • 2.5196 in(1)
    • 2.52 in(1)
    • 3.0 in(2)
    • 3.148 in(1)
    • 3.1496 in(1)
    • 3.92 in(2)
    • 3.936 in(2)
    • 4.0 in(6)
    • 5.0 in(3)
    • 5.0392 in(2)
    • 6.0 in(2)
    • 6.2992 in(3)
    • 7.0 in(2)
    • 7.874 in(1)
    • 8.0 in(4)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 31.26 mm(1)
    • 31.3 mm(1)
    • 32.766 mm(1)
    • 38.1 mm(1)
    • 48.0 mm(2)
    • 50.8 mm(2)
    • 63.5 mm(3)
    • 64.0 mm(2)
    • 76.2 mm(2)
    • 80.0 mm(2)
    • 100.0 mm(4)
    • 101.6 mm(6)
    • 127.0 mm(3)
    • 128.0 mm(2)
    • 152.4 mm(2)
    • 160.0 mm(3)
    • 177.8 mm(2)
    • 200.0 mm(1)
    • 203.2 mm(4)
    Maximum Bore Depth MintoMaximum Bore Depth Max
    Front-End
    Cutting Width
    Cutting Width
    • 0.0197 in(16)
    • 0.031 in(16)
    • 0.0315 in(16)
    • 0.0394 in(33)
    • 0.041 in(8)
    • 0.047 in(38)
    • 0.0472 in(33)
    • 0.0551 in(16)
    • 0.058 in(16)
    • 0.0591 in(33)
    • 0.062 in(38)
    • 0.0669 in(16)
    • 0.0689 in(33)
    • 0.072 in(17)
    • 0.0768 in(16)
    • 0.078 in(17)
    • 0.0787 in(33)
    • 0.0866 in(33)
    • 0.088 in(8)
    • 0.0886 in(25)
    • 0.094 in(38)
    • 0.0984 in(33)
    • 0.1083 in(33)
    • 0.1181 in(35)
    • 0.125 in(38)
    • 0.126 in(17)
    • 0.1278 in(16)
    • 0.128 in(9)
    • 0.1378 in(35)
    • 0.147 in(8)
    • 0.151 in(16)
    • 0.156 in(17)
    • 0.1574 in(19)
    • 0.1575 in(22)
    • 0.1673 in(8)
    • 0.1771 in(22)
    • 0.1772 in(19)
    • 0.188 in(20)
    • 0.189 in(22)
    • 0.192 in(8)
    • 0.195 in(8)
    • 0.196 in(17)
    • 0.1969 in(5)
    • 0.2165 in(2)
    • 0.2362 in(3)
    • 0.25 in(5)
    Cutting Width MintoCutting Width Max
    Cutting Width
    Cutting Width
    • 0.5 mm(16)
    • 0.787 mm(16)
    • 0.8 mm(16)
    • 1.0 mm(33)
    • 1.041 mm(8)
    • 1.19 mm(17)
    • 1.194 mm(30)
    • 1.2 mm(33)
    • 1.4 mm(16)
    • 1.473 mm(16)
    • 1.5 mm(33)
    • 1.57 mm(25)
    • 1.575 mm(38)
    • 1.7 mm(16)
    • 1.75 mm(33)
    • 1.829 mm(17)
    • 1.95 mm(16)
    • 1.981 mm(17)
    • 2.0 mm(33)
    • 2.2 mm(33)
    • 2.236 mm(8)
    • 2.25 mm(25)
    • 2.387 mm(8)
    • 2.388 mm(38)
    • 2.39 mm(9)
    • 2.5 mm(33)
    • 2.75 mm(33)
    • 3.0 mm(35)
    • 3.17 mm(17)
    • 3.175 mm(38)
    • 3.18 mm(3)
    • 3.2 mm(17)
    • 3.245 mm(16)
    • 3.25 mm(9)
    • 3.5 mm(35)
    • 3.73 mm(8)
    • 3.84 mm(16)
    • 3.96 mm(9)
    • 3.962 mm(17)
    • 3.974 mm(8)
    • 4.0 mm(22)
    • 4.25 mm(8)
    • 4.5 mm(22)
    • 4.775 mm(17)
    • 4.788 mm(3)
    • 4.8 mm(17)
    • 4.801 mm(22)
    • 4.88 mm(8)
    • 4.953 mm(8)
    • 4.978 mm(17)
    • 5.0 mm(5)
    • 5.5 mm(2)
    • 6.0 mm(3)
    • 6.35 mm(5)
    • 6.36 mm(3)
    Cutting Width MintoCutting Width Max
    Insert Size
    Insert Size
    • 1 (5)
    • 2 (16)
    • 3 (17)
    • 4 (5)
    • 6 (1)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.067 in(1)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 1.69 mm(1)
    Maximum Cutting Depth MintoMaximum Cutting Depth Max
    Back-End
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(1)
    • 10.0 mm(1)
    • 12.0 mm(3)
    • 12.7 mm(3)
    • 15.875 mm(3)
    • 16.0 mm(2)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 25.0 mm(4)
    • 25.4 mm(6)
    • 31.75 mm(3)
    • 32.0 mm(2)
    • 38.1 mm(2)
    • 40.0 mm(3)
    • 44.45 mm(2)
    • 50.0 mm(1)
    • 50.8 mm(4)
    Back-End Diameter MintoBack-End Diameter Max
    No filters matching ""
    You are about to add to your My Solutions page. Do you want to proceed?
    Select the destination where you want to move to.
    New Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service
    item(s) successfully added to the cart
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Number Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)