HSR • High Speed Reamers • Carbide
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (64)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(64)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(64)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(64)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(64)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(64)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(64)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(64)
- M Stainless Steel (64)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(64)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(64)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(64)
- K Cast Iron (64)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(64)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(64)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(64)
- N Non-Ferrous Materials (42)
- N1Wrought Aluminum (42)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(42)
- N3High-Silicon Aluminum Alloys Si >12.2%(42)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (42)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (42)
- N6Carbon, Graphite Composites, CFRP (42)
- S High-Temp Alloys (64)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(64)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(64)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(42)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(42)
Applications
Applications
Blind & Cross Hole Finishing (18)
Blind Hole Finishing (18)
Through & Cross Hole Finishing (46)
Through Hole Finishing (46)
Cutting Diameter
Cutting Diameter
- 0.055 in(1)
- 0.059 in(1)
- 0.063 in(1)
- 0.0787 in(4)
- 0.079 in(1)
- 0.087 in(1)
- 0.098 in(1)
- 0.11 in(1)
- 0.118 in(1)
- 0.1181 in(4)
- 0.126 in(1)
- 0.138 in(1)
- 0.157 in(1)
- 0.1575 in(4)
- 0.177 in(1)
- 0.1969 in(5)
- 0.197 in(1)
- 0.236 in(1)
- 0.2362 in(6)
- 0.276 in(1)
- 0.315 in(7)
- 0.335 in(1)
- 0.354 in(1)
- 0.374 in(1)
- 0.3937 in(5)
- 0.394 in(1)
- 0.4724 in(5)
- 0.5512 in(5)
to
Cutting Diameter
Cutting Diameter
- 1.4 mm(1)
- 1.5 mm(1)
- 1.6 mm(1)
- 2.0 mm(5)
- 2.2 mm(1)
- 2.5 mm(1)
- 2.8 mm(1)
- 3.0 mm(5)
- 3.2 mm(1)
- 3.5 mm(1)
- 4.0 mm(5)
- 4.5 mm(1)
- 5.0 mm(6)
- 6.0 mm(7)
- 7.0 mm(1)
- 8.0 mm(7)
- 8.5 mm(1)
- 9.0 mm(1)
- 9.5 mm(1)
- 10.0 mm(6)
- 12.0 mm(5)
- 14.0 mm(5)
to
Number of Flutes
Number of Flutes
- 3 (3)
- 4 (27)
- 6 (34)
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- K10 (20)
- K10F (22)
- K10F-DCFD (22)
Helix Hand
Helix Hand
- L (46)
- N (18)
Lead in Length
Lead in Length
- 0.2 mm(2)
- 0.3 mm(6)
- 0.4 mm(8)
- 0.5 mm(4)
- 0.6 mm(4)
- 0.7 mm(7)
- 0.9 mm(7)
- 1.1 mm(6)
to
Lead In Length
Lead In Length
- 0.008 in(2)
- 0.012 in(6)
- 0.016 in(8)
- 0.02 in(4)
- 0.024 in(4)
- 0.028 in(7)
- 0.035 in(7)
- 0.043 in(6)
to
Back-End
Back-End Diameter
Back-End Diameter
- 1.4 mm(1)
- 1.5 mm(1)
- 1.6 mm(1)
- 2.0 mm(1)
- 2.2 mm(1)
- 2.5 mm(1)
- 2.8 mm(1)
- 3.0 mm(9)
- 3.2 mm(1)
- 3.5 mm(1)
- 4.0 mm(5)
- 4.5 mm(1)
- 5.0 mm(1)
- 5.6 mm(1)
- 6.0 mm(11)
- 7.1 mm(1)
- 8.0 mm(8)
- 9.0 mm(2)
- 10.0 mm(6)
- 12.0 mm(5)
- 14.0 mm(5)
to
Back-End Diameter
Back-End Diameter
- 0.0551 in(1)
- 0.0591 in(1)
- 0.063 in(1)
- 0.0787 in(1)
- 0.0866 in(1)
- 0.0984 in(1)
- 0.1102 in(1)
- 0.1181 in(9)
- 0.126 in(1)
- 0.1378 in(1)
- 0.1575 in(5)
- 0.1772 in(1)
- 0.1969 in(1)
- 0.2205 in(1)
- 0.2362 in(11)
- 0.2795 in(1)
- 0.315 in(8)
- 0.3543 in(2)
- 0.3937 in(6)
- 0.4724 in(5)
- 0.5512 in(5)
to
No filters matching ""
