TDS403A • Mango A • WP20PD™ • 8 x D
Producto similar a:
TDS403A • Mango A • WP20PD™ • 8 x D
TDS403A • 8 x D
Número de material100006889
Póngase en contacto con nuestro equipo de ventas para descubrir todas sus opciones de precios
Features and benefits
- Top Drill S™ para mecanizado de acero
- Canales de refrigeración interna
- Dos márgenes para mejorar la orientación, incluso en condiciones críticas, como agujeros cruzados y salida en superficies inclinadas
- Calidad WP20PD específica para materiales ISO P
- La tolerancia h6 del mango cilíndrico también es adecuada para los soportes de ajuste por contracción
- Tolerancia de diámetro de corte m7: adecuada como guía para brocas de agujeros profundos
Drilling
Through Coolant: Radial: Drilling
Mango — Liso cilíndrico ≤h6
Ángulo de la hélice: 30°
38513
38550
Profundidad de taladrado: 8x
| Sistema métrico | ||
| Tolerancia | ||
| rango de tamaño nominal | D1 tolerancia m7 | D tolerancia h6 |
| 0,004/0,016 | 0,000/-0,008 | |
| 0,006/0,021 | 0,000/-0,009 | |
| 0,007/0,025 | 0,000/-0,011 | |
| 0,008/0,029 | 0,000/-0,013 | |
| Sistema métrico | ||
| Tolerancia | ||
| rango de tamaño nominal | D1 tolerancia m7 | D tolerancia h6 |
| 0,004/0,016 | 0,000/-0,008 | |
| 0,006/0,021 | 0,000/-0,009 | |
| 0,007/0,025 | 0,000/-0,011 | |
| 0,008/0,029 | 0,000/-0,013 | |
| Pulgadas | ||
| Tolerancia | ||
| rango de tamaño nominal | D1 tolerancia m7 | D tolerancia h6 |
| .0000/.0005 | .0000/-.0003 | |
| .0000/.0006 | .0000/-.0004 | |
| .0000/.0007 | .0000/-.0004 | |
| .0000/.0009 | .0000/-.0005 | |
 |  | ||||||||||||
| Velocidad de corte | |||||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Grupo de materiales | Mín | – | Máx. | diámetro de la herramienta | .125 | .188 | .250 | .313 | .375 | .500 | .625 | .750 | |
| P | 1 | 230 | – | 460 | IPR | .003–.006 | .004–.007 | .005–.010 | .006–.012 | .006–.013 | .008–.015 | .009–.018 | .011–.022 |
| 2, 3, 4, 6, 7 | 230 | – | 460 | IPR | .003–.006 | .004–.007 | .005–.010 | .006–.012 | .007–.013 | .009–.015 | .011–.019 | .013–.024 | |
| 5, 9, 10, 11 | 200 | – | 390 | IPR | .003–.006 | .004–.007 | .005–.010 | .006–.012 | .007–.013 | .008–.015 | .009–.019 | .011–.024 | |
| 12, 13.1, 13.2 | 130 | – | 200 | IPR | .002–.004 | .003–.005 | .004–.008 | .004–.009 | .005–.009 | .005–.011 | .007–.012 | .009–.017 | |
| M | 14.1 | 100 | – | 160 | IPR | .002–.004 | .002–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.008 | .006–.009 | .006–.010 |
| 14.3 | 130 | – | 200 | IPR | .002–.004 | .003–.005 | .004–.005 | .004–.007 | .004–.008 | .005–.009 | .006–.010 | .006–.011 | |
| 14.2, 14.4 | 100 | – | 160 | IPR | .002–.004 | .003–.004 | .003–.005 | .004–.006 | .004–.007 | .005–.007 | .006–.008 | .006–.010 | |
| Grupo de materiales |  | | |||||||||||
| Velocidad de corte | Avance recomendado (f) por diámetro | ||||||||||||
| Rango | |||||||||||||
| Mín | – | Máx. | diámetro de la herramienta | – | – | – | – | – | – | – | – | ||
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| | ||||||||||||
| Velocidad de corte | |||||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Grupo de materiales | Mín | – | Máx. | diámetro de la herramienta | .125 | .188 | .250 | .313 | .375 | .500 | .625 | .750 | |
| P | 1 | 260 | – | 590 | IPR | .003–.006 | .004–.007 | .005–.010 | .006–.012 | .006–.014 | .008–.016 | .010–.019 | .012–.023 |
| 2, 3, 4, 6, 7 | 260 | – | 520 | IPR | .003–.007 | .004–.008 | .005–.010 | .006–.012 | .008–.014 | .009–.016 | .012–.020 | .014–.025 | |
| 5, 9, 10, 11 | 260 | – | 460 | IPR | .003–.007 | .004–.008 | .005–.010 | .006–.012 | .007–.014 | .008–.016 | .010–.020 | .012–.025 | |
| 12, 13.1, 13.2 | 160 | – | 260 | IPR | .002–.004 | .003–.005 | .004–.008 | .004–.009 | .005–.010 | .006–.011 | .007–.013 | .010–.017 | |
| M | 14.1 | 130 | – | 200 | IPR | .002–.004 | .002–.005 | .003–.005 | .004–.006 | .004–.007 | .005–.008 | .006–.009 | .007–.010 |
| 14.3 | 130 | – | 230 | IPR | .002–.004 | .003–.005 | .004–.005 | .004–.007 | .004–.008 | .005–.009 | .006–.010 | .007–.012 | |
| 14.2, 14.4 | 110 | – | 160 | IPR | .002–.004 | .003–.005 | .003–.005 | .004–.006 | .004–.007 | .005–.008 | .006–.009 | .007–.010 | |
| Grupo de materiales | | | |||||||||||
| Velocidad de corte | Avance recomendado (f) por diámetro | ||||||||||||
| Rango | |||||||||||||
| Mín | – | Máx. | diámetro de la herramienta | – | – | – | – | – | – | – | – | ||
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Pulgadas | ||
| Tolerancia | ||
| rango de tamaño nominal | D1 tolerancia m7 | D tolerancia h6 |
| .0000/.0005 | .0000/-.0003 | |
| .0000/.0006 | .0000/-.0004 | |
| .0000/.0007 | .0000/-.0004 | |
| .0000/.0009 | .0000/-.0005 | |
| Grupo de materiales | |  | |||||||||||
| Velocidad de corte | Avance recomendado (f) por diámetro | ||||||||||||
| Rango | |||||||||||||
| Mín | – | Máx. | diámetro de la herramienta | – | – | – | – | – | – | – | – | ||
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| | ||||||||||||
| Velocidad de corte | |||||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Grupo de materiales | Mín | – | Máx. | diámetro de la herramienta | .125 | .188 | .250 | .313 | .375 | .500 | .625 | .750 | |
| K | 15, 16 | 230 | – | 560 | IPR | .004–.009 | .005–.009 | .006–.012 | .008–.015 | .009–.017 | .010–.019 | .012–.024 | .015–.029 |
| 17, 18, 19 | 260 | – | 460 | IPR | .005–.006 | .005–.007 | .006–.010 | .008–.012 | .009–.014 | .010–.016 | .012–.019 | .015–.024 | |
| 20 | 230 | – | 430 | IPR | .003–.007 | .004–.007 | .005–.010 | .006–.012 | .007–.014 | .007–.016 | .009–.019 | .012–.024 | |
| Grupo de materiales | |  | |||||||||||
| Velocidad de corte | Avance recomendado (f) por diámetro | ||||||||||||
| Rango | |||||||||||||
| Mín | – | Máx. | diámetro de la herramienta | – | – | – | – | – | – | – | – | ||
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| – | – | – | – | – | – | – | – | – | – | – | – | – | |
| | ||||||||||||
| Velocidad de corte | |||||||||||||
| Rango | Avance recomendado (f) por diámetro | ||||||||||||
| Grupo de materiales | Mín | – | Máx. | diámetro de la herramienta | .125 | .188 | .250 | .313 | .375 | .500 | .625 | .750 | |
| K | 15, 16 | 260 | – | 620 | IPR | .004–.009 | .005–.009 | .006–.012 | .008–.015 | .009–.017 | .010–.019 | .012–.024 | .015–.029 |
| 17, 18, 19 | 300 | – | 560 | IPR | .005–.006 | .005–.007 | .006–.010 | .008–.012 | .009–.014 | .010–.016 | .012–.019 | .015–.024 | |
| 20 | 260 | – | 490 | IPR | .003–.007 | .004–.007 | .005–.010 | .006–.012 | .007–.014 | .007–.016 | .009–.019 | .012–.024 | |