语言

度量单位

M100 • RDMT-M0T • RD0802..

iC08 • 刀片

Features and benefits

精密压制正前角槽型，可降低切削力。

一般加工、粗加工操作中不锈钢和高温合金的首选。

Workpiece Materials

P 钢

M 不锈钢

K 铸铁

N 非铁材质

S 高温合金

Displaying 1- 2 of 2 results

Select Columns

Metric

Inch

Show

Metric

Inch

SAP 材料编号	ISO 目录编号	ANSI 目录编号	材质	每个刀片的切削刃	[SSC] 刀片 IC 尺寸	[SSC] 刀片 IC 尺寸	[S] 刀片厚度	[S] 刀片厚度
6901186	RDMT0802M0T	RDMT0802M0T	WP35CM	1	8.0000	.3150	2.3800	.0938
List price: $12.36 /each Your price:: Qty Oops! we don't have that many in stock. Adjusted to meet the minimum package size.
6901187	RDMT1003M0T	RDMT1003M0T	WP35CM	1	10.0000	.3937	3.1800	.1250
List price: $13.60 /each Your price:: Qty Oops! we don't have that many in stock. Adjusted to meet the minimum package size.

Grades

THM

不涂层硬质合金, 适合铸铁, 非铁金属和非金属材料的轻型加工至中等加工, 同时也适合硬材料的低速加工.

K 铸铁

N 非铁材质
TN450

带涂层硬质合金材质
- CVD-TiN-TiCN-TiN复合涂层
- 一般切削和重型切削
- 用于各种钢质和球墨铸铁材料的加工
- 建议使用冷却液
-韧性极好，不受温度变化的影响

P 钢
TN6525

涂层硬质合金材质TN6525的涂层为PVD-TiAlN复合涂层。适用于钢质材料和高强度球墨铸铁材料的轻型加工和一般加工。

P 钢

K 铸铁

M 不锈钢
TN6540

涂层硬质合金材质TN6540的涂层为PVD-TiAlN复合涂层，适用于一般加工和重型加工。适用于各类钢质材料和球墨铸铁材料的加工。

P 钢

S 高温合金

K 铸铁

M 不锈钢
TN7525

MT-CVD/CVD — TiN-TiCN-Al₂O₃-TiN 涂层硬质合金。适用于钢材料和球墨铸铁材料的轻型加工和一般加工。

P 钢

M 不锈钢
TN7535

MT-CVD/CVD — TiN-TiCN-Al₂O₃ 涂层硬质合金。适用于钢材料和球墨铸铁材料的一般加工和重型加工。

P 钢

K 铸铁

M 不锈钢
WP35CM

P 钢

S 高温合金

K 铸铁

M 不锈钢

Insert Selection Guide

	Light Machining		General Purpose		Heavy Machining
Material Group	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	RDMT-T	WP35CM	RDMT-T	WP35CM	RDMT-T	WP35CM
P3–P4	RDMT-T	WP35CM	RDMW-T	TN6540	RDMW-T	TN6540
P5–P6	RDMT-T	WP35CM	RDMT-T	WP35CM	RDMT-T	WP35CM
M1–M2	RDHT-T	WP35CM	RDHT-T	WP35CM	RDMT-T	WP35CM
M3	RDHT-T	WP35CM	RDHT-T	WP35CM	RDMT-T	WP35CM
K1–K2	–	–	RDMT-T	WP35CM	RDMT-T	WP35CM
K3	–	–	RDMT-T	WP35CM	RDMT-T	WP35CM
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	–	–	–	–	–	–
H1	–	–	–	–	–	–

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
RDMW-	0,19	0,29	0,42	0,14	0,21	0,30	0,10	0,16	0,23	0,09	0,14	0,20	0,08	0,13	0,18	RDMW-
RDHT-T	0,23	0,31	0,63	0,17	0,23	0,45	0,13	0,17	0,34	0,11	0,15	0,29	0,10	0,14	0,27	RDHT-T
RDMT-T	0,23	0,31	0,63	0,17	0,23	0,45	0,13	0,17	0,34	0,11	0,15	0,29	0,10	0,14	0,27	RDMT-T
RDMW-T	0,23	0,42	0,73	0,17	0,30	0,53	0,13	0,23	0,39	0,11	0,20	0,34	0,10	0,18	0,32	RDMW-T

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
RDMW-	0,22	0,34	0,48	0,16	0,24	0,35	0,12	0,18	0,26	0,10	0,16	0,23	0,09	0,15	0,21	RDMW-
RDHT-T	0,27	0,36	0,72	0,19	0,26	0,52	0,14	0,20	0,39	0,13	0,17	0,34	0,12	0,16	0,31	RDHT-T
RDMT-T	0,27	0,36	0,72	0,19	0,26	0,52	0,14	0,20	0,39	0,13	0,17	0,34	0,12	0,16	0,31	RDMT-T
RDMW-T	0,27	0,48	0,85	0,19	0,35	0,61	0,14	0,26	0,46	0,13	0,23	0,40	0,12	0,21	0,36	RDMW-T

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
RDMW-	0,39	0,60	0,87	0,28	0,44	0,62	0,21	0,33	0,47	0,18	0,28	0,41	0,17	0,26	0,37	RDMW-
RDHT-T	0,48	0,65	1,31	0,35	0,47	0,94	0,26	0,35	0,70	0,23	0,30	0,61	0,21	0,28	0,56	RDHT-T
RDMT-T	0,48	0,65	1,31	0,35	0,47	0,94	0,26	0,35	0,70	0,23	0,30	0,61	0,21	0,28	0,56	RDMT-T
RDMW-T	0,48	0,87	1,54	0,35	0,62	1,10	0,26	0,47	0,82	0,23	0,41	0,71	0,21	0,37	0,65	RDMW-T

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5 %			10 %			20 %			30 %			40 100 %
RDMW-	0,28	0,44	0,63	0,20	0,32	0,46	0,15	0,24	0,34	0,13	0,21	0,30	0,12	0,19	0,27	RDMW-
RDHT-T	0,35	0,47	0,95	0,25	0,34	0,69	0,19	0,26	0,51	0,17	0,22	0,45	0,15	0,20	0,41	RDHT-T
RDMT-T	0,35	0,47	0,95	0,25	0,34	0,69	0,19	0,26	0,51	0,17	0,22	0,45	0,15	0,20	0,41	RDMT-T
RDMW-T	0,35	0,63	1,12	0,25	0,46	0,80	0,19	0,34	0,60	0,17	0,30	0,52	0,15	0,27	0,48	RDMW-T

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
RDMW-	.007	.011	.016	.005	.008	.012	.004	.006	.009	.003	.005	.008	.003	.005	.007	RDMW-
RDHT-T	.009	.012	.024	.007	.009	.018	.005	.007	.013	.004	.006	.011	.004	.005	.011	RDHT-T
RDMT-T	.009	.012	.024	.007	.009	.018	.005	.007	.013	.004	.006	.011	.004	.005	.011	RDMT-T
RDMW-T	.009	.016	.028	.007	.012	.021	.005	.009	.015	.004	.008	.013	.004	.007	.012	RDMW-T

Light Machining

General Purpose

Heavy Machining

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
RDMW-	.008	.013	.019	.006	.009	.014	.005	.007	.010	.004	.006	.009	.004	.006	.008	RDMW-
RDHT-T	.010	.014	.028	.008	.010	.020	.006	.008	.015	.005	.007	.013	.005	.006	.012	RDHT-T
RDMT-T	.010	.014	.028	.008	.010	.020	.006	.008	.015	.005	.007	.013	.005	.006	.012	RDMT-T
RDMW-T	.010	.019	.033	.008	.014	.024	.006	.010	.018	.005	.009	.015	.005	.008	.014	RDMW-T

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
RDMW-	.015	.023	.034	.011	.017	.024	.008	.013	.018	.007	.011	.016	.007	.010	.014	RDMW-
RDHT-T	.019	.025	.051	.014	.018	.037	.010	.014	.027	.009	.012	.024	.008	.011	.022	RDHT-T
RDMT-T	.019	.025	.051	.014	.018	.037	.010	.014	.027	.009	.012	.024	.008	.011	.022	RDMT-T
RDMW-T	.019	.034	.060	.014	.024	.043	.010	.018	.032	.009	.016	.028	.008	.014	.025	RDMW-T

Insert Geometry	Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40 100%
RDMW-	.011	.017	.025	.008	.012	.018	.006	.009	.013	.005	.008	.012	.005	.007	.011	RDMW-
RDHT-T	.014	.018	.037	.010	.013	.027	.007	.010	.020	.006	.009	.017	.006	.008	.016	RDHT-T
RDMT-T	.014	.018	.037	.010	.013	.027	.007	.010	.020	.006	.009	.017	.006	.008	.016	RDMT-T
RDMW-T	.014	.025	.043	.010	.018	.031	.007	.013	.023	.006	.012	.020	.006	.011	.019	RDMW-T

建议的初始速度 [米/分钟]

Material Group		THM			TN6525			TN6540			TTM08			WK15CM			WP35CM			WS30PM			WS40PM
P	1	–	–	–	410	320	280	360	280	240	230	200	190	–	–	–	455	395	370	–	–	–	–	–	–
	2	–	–	–	320	250	215	250	190	170	195	170	140	–	–	–	280	255	230	–	–	–	–	–	–
	3	–	–	–	280	215	185	215	170	140	180	150	125	–	–	–	255	230	205	–	–	–	–	–	–
	4	–	–	–	235	170	145	180	130	110	160	130	105	–	–	–	190	175	160	–	–	–	–	–	–
	5	–	–	–	310	235	200	240	180	150	–	–	–	–	–	–	260	230	210	–	–	–	205	175	145
	6	–	–	–	205	160	130	160	120	100	–	–	–	–	–	–	160	135	110	–	–	–	180	130	95
M	1	–	–	–	190	120	80	130	80	60	–	–	–	–	–	–	205	185	155	270	240	220	250	205	170
	2	–	–	–	120	80	50	80	50	40	–	–	–	–	–	–	185	160	140	245	215	175	215	175	145
	3	–	–	–	125	80	55	85	50	40	–	–	–	–	–	–	145	130	115	185	160	125	175	130	100
K	1	120	90	75	275	245	220	220	205	180	–	–	–	505	460	410	295	265	240	–	–	–	–	–	–
	2	125	100	70	215	190	180	175	155	140	–	–	–	400	355	330	235	210	190	–	–	–	–	–	–
	3	130	95	60	180	160	145	155	145	125	–	–	–	335	300	275	195	175	160	–	–	–	–	–	–
N	1	900	600	500	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	685	465	385	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	450	280	200	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	50	35	30	–	–	–	–	–	–	–	–	–	55	50	35	50	40	30
	2	–	–	–	–	–	–	25	20	10	–	–	–	–	–	–	–	–	–	55	50	35	50	40	30
	3	–	–	–	–	–	–	70	40	30	–	–	–	–	–	–	–	–	–	65	55	35	60	50	30
	4	–	–	–	–	–	–	60	30	25	–	–	–	–	–	–	66	50	33	100	70	50	70	60	35
H	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Recommended Starting Speeds [SFM]

Material Group		THM			TN6525			TN6540			WP35CM
P	1	–	–	–	1340	1045	925	1180	925	785	1790	1555	1460
	2	–	–	–	1045	830	710	830	630	550	1105	1000	905
	3	–	–	–	925	710	610	710	550	450	1000	905	805
	4	–	–	–	770	550	475	590	430	355	750	690	630
	5	–	–	–	1025	770	650	785	590	490	1025	905	830
	6	–	–	–	670	535	430	535	395	335	630	535	430
M	1	–	–	–	630	395	260	430	260	200	805	725	610
	2	–	–	–	395	260	155	260	155	140	725	630	550
	3	–	–	–	415	260	180	275	155	140	570	510	450
K	1	390	295	245	905	805	725	725	670	590	1165	1045	940
	2	410	325	225	710	630	590	570	510	450	925	830	750
	3	425	310	195	590	535	475	510	475	415	770	690	630
N	1	2950	1965	1640	–	–	–	–	–	–	–	–	–
	2	2245	1525	1260	–	–	–	–	–	–	–	–	–
	3	1475	915	655	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	155	120	95	–	–	–
	2	–	–	–	–	–	–	80	60	40	–	–	–
	3	–	–	–	–	–	–	235	140	95	–	–	–
	4	–	–	–	–	–	–	200	95	80	260	200	130
H	1	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–

Material Group

TTM08

WK15CM

WS30PM

WS40PM

750

655

620

–

635

555

455

–

590

490

410

–

520

425

340

–

560

475

395

–

490

360

260

–

890

785

725

690

560

460

–

805

710

570

590

475

395

–

610

535

415

475

360

280

–

1655

1520

1340

–

1320

1165

1080

–

1105

985

905

–

180

155

120

130

115

–

180

155

120

130

115

–

215

180

120

165

130

–

335

235

155

195

165

100

–

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

SAP Material Number	ISO Catalog	Grade

欢迎

请确认您的首选项

更新首选项

Product Suggestions

Product Family suggestions

与专家交流

发送消息

编辑解决方案

添加解决方案

M100 • RDMT-M0T • RD0802..

iC08 • 刀片

Features and benefits

Workpiece Materials

Grades

Insert Selection Guide

建议的初始速度 [米/分钟]

Recommended Starting Speeds [SFM]

Product Suggestions

Product Family suggestions

与专家交流

发送消息

Notifications

M100 • RDMT-M0T • RD0802..

iC08 • 刀片

Features and benefits

Workpiece Materials

Grades

Insert Selection Guide

建议的初始速度 [米/分钟]

Recommended Starting Speeds [SFM]

The following CAD files are available

The following CAD files are available