successfully added to cart
View Cart
M-夹持
M-夹持
M-夹持
M-夹持

MCLN 95° - KM32TS 内部切削装置 (M-夹持)

M-夹持

Uses and application

  • 刀柄 —  KM-TS  ISO 26622刀柄 — KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • 冷却方式- 贯通式冷却  100 bar (1500 psi)  最大值冷却方式- 贯通式冷却 100 bar (1500 psi) 最大值

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Applications
  • Facing Facing (3)
  • Multiple Direction Cutting Multiple Direction Cutting (3)
  • Profiling Profiling (2)
  • TRN Boring TRN Boring (2)
  • Turning Turning (3)
Workpiece Material
  • P Steel (3)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (3)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (3)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (3)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (3)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (3)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (3)
  • M Stainless Steel (3)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (3)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (3)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (3)
  • K Cast Iron (3)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (3)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (3)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (3)
  • N Non-Ferrous Materials (3)
    • N1
      Wrought Aluminum
      (3)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (3)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (3)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (3)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (3)
    • N6
      Carbon, Graphite Composites, CFRP
      (3)
    • N7
      MMC's
      (3)
  • S High-Temp Alloys (3)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (3)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (3)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (3)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (3)
  • H Hardened Materials (3)
    • H1
      Hardened Materials 44-48 HRC
      (3)
    • H2
      Hardened Materials 48-55 HRC
      (3)
    • H3
      Hardened Materials 56-60 HRC
      (3)
    • H4
      Hardened Materials >60 HRC
      (3)
Cutting Condition
  • Heavily Interrupted Cut (3)
  • Interrupted (3)
  • Lightly Interrupted Cut (3)
  • Smooth Cut (3)
  • Varying Depth of Cut (3)
Cutting Condition Material
  • H-All (3)
  • K-All (3)
  • K1 (3)
  • M-All (3)
  • N-All (3)
  • P-All (3)
  • S-All (3)
  • S2 (3)
  • S4 (3)
Cutting Edges Per Insert
  • 1.0 (3)
  • 2.0 (3)
  • 4.0 (3)
  • 8.0 (3)
to
cornerConfiguration
Corner Radius
  • 0.1 (3)
  • 0.102 (3)
  • 0.2 (3)
  • 0.203 (3)
  • 0.397 (3)
  • 0.4 (3)
  • 0.792 (3)
  • 0.794 (3)
  • 0.8 (3)
  • 1.19 (3)
  • 1.191 (3)
  • 1.2 (3)
  • 1.587 (3)
  • 1.588 (3)
  • 1.6 (3)
to
Corner Radius
  • 0.004 (3)
  • 0.008 (3)
  • 0.0083 (3)
  • 0.0156 (3)
  • 0.016 (3)
  • 0.031 (3)
  • 0.0312 (3)
  • 0.0313 (3)
  • 0.0315 (3)
  • 0.0469 (3)
  • 0.047 (3)
  • 0.0472 (3)
  • 0.0625 (3)
  • 0.063 (3)
  • 0.1563 (3)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (3)
  • 241 (3)
  • CL4 (3)
  • CM2 (3)
  • CM3 (3)
  • CM4 (3)
  • CPX (3)
  • CW2 (3)
  • CW2015 (3)
  • CW5025 (3)
  • GX (3)
  • HK1500 (3)
  • HT2 (3)
  • HTX (3)
  • K060 (3)
  • K090 (3)
  • K1 (3)
  • K10M (3)
  • K10P (3)
  • K10U (3)
  • K15U (3)
  • K20K (3)
  • K21 (3)
  • K25M (3)
  • K25P (3)
  • K313 (3)
  • K420 (3)
  • K45 (3)
  • K68 (3)
  • KB1340 (3)
  • KB1345 (3)
  • KB1610 (3)
  • KB1625 (3)
  • KB1630 (3)
  • KB5610 (3)
  • KB5625 (3)
  • KB5630 (3)
  • KB9610 (3)
  • KB9640 (3)
  • KBH10 (3)
  • KBH10B (3)
  • KBH20 (3)
  • KBH20B (3)
  • KBK35 (3)
  • KC210 (3)
  • KC250 (3)
  • KC5010 (3)
  • KC5025 (3)
  • KC5410 (3)
  • KC5510 (3)
  • KC5525 (3)
  • KC710 (3)
  • KC720 (3)
  • KC722 (3)
  • KC730 (3)
  • KC7310 (3)
  • KC732 (3)
  • KC8050 (3)
  • KC810 (3)
  • KC850 (3)
  • KC9010 (3)
  • KC9025 (3)
  • KC910 (3)
  • KC9105 (3)
  • KC9110 (3)
  • KC9120 (3)
  • KC9125 (3)
  • KC9140 (3)
  • KC9145 (3)
  • KC9215 (3)
  • KC9225 (3)
  • KC9240 (3)
  • KC9240NEW (3)
  • KC9245 (3)
  • KC9315 (3)
  • KC9320 (3)
  • KC9325 (3)
  • KC935 (3)
  • KC950 (3)
  • KC990 (3)
  • KCK05 (3)
  • KCK05B (3)
  • KCK15 (3)
  • KCK15B (3)
  • KCK20 (3)
  • KCK20B (3)
  • KCM15 (3)
  • KCM15B (3)
  • KCM25 (3)
  • KCM25B (3)
  • KCM35 (3)
  • KCM35B (3)
  • KCP05 (3)
  • KCP05B (3)
  • KCP10 (3)
  • KCP10B (3)
  • KCP25 (3)
  • KCP25B (3)
  • KCP30 (3)
  • KCP30B (3)
  • KCP40 (3)
  • KCP40B (3)
  • KCPK05 (3)
  • KCS10 (3)
  • KCS10B (3)
  • KCU10 (3)
  • KCU25 (3)
  • KD050 (3)
  • KD081 (3)
  • KD100 (3)
  • KD120 (3)
  • KD1400 (3)
  • KD1405 (3)
  • KD1425 (3)
  • KM1 (3)
  • KMF (3)
  • KT1120 (3)
  • KT125 (3)
  • KT150 (3)
  • KT175 (3)
  • KT315 (3)
  • KT325 (3)
  • KU10T (3)
  • KU30T (3)
  • KY1310 (3)
  • KY1320 (3)
  • KY1540 (3)
  • KY1615 (3)
  • KY2000 (3)
  • KY2100 (3)
  • KY3000 (3)
  • KY3400 (3)
  • KY3500 (3)
  • KY4000 (3)
  • KY4300 (3)
  • KY4400 (3)
  • KYHK15B (3)
  • KYK10 (3)
  • KYK25 (3)
  • KYK35 (3)
  • KYS25 (3)
  • KYS30 (3)
  • NL200 (3)
  • NL250 (3)
  • NL300 (3)
  • NL400 (3)
  • NL920 (3)
  • P25 (3)
  • PB100 (3)
  • PB170 (3)
  • PB250 (3)
  • PB300 (3)
  • PS5 (3)
  • SP0819 (3)
  • SP3019 (3)
  • SP4019 (3)
  • THM (3)
  • THM-X (3)
  • THMF-X (3)
  • TN10P (3)
  • TN10U (3)
  • TN15M (3)
  • TN15U (3)
  • TN2000 (3)
  • TN20K (3)
  • TN20P (3)
  • TN30M (3)
  • TN30P (3)
  • TN4000 (3)
  • TN5015 (3)
  • TN5020 (3)
  • TN5105 (3)
  • TN5120 (3)
  • TN6010 (3)
  • TN6025 (3)
  • TN7005 (3)
  • TN7010 (3)
  • TN7015 (3)
  • TN7025 (3)
  • TN7035 (3)
  • TN7105 (3)
  • TN7110 (3)
  • TN7115 (3)
  • TN7125 (3)
  • TN7135 (3)
  • TN8025 (3)
  • TTI15 (3)
  • TTR (3)
  • TTS (3)
  • TTX (3)
  • WBH10C (3)
  • WBH10P (3)
  • WBH10U (3)
  • WBH20P (3)
  • WBH25P (3)
  • WBH25U (3)
  • WBH30P (3)
  • WBK40U (3)
  • WBK45U (3)
  • WDN00U (3)
  • WDN25U (3)
  • WK05CT (3)
  • WK15CT (3)
  • WK20CT (3)
  • WM15CT (3)
  • WM25CT (3)
  • WM35CT (3)
  • WP05CT (3)
  • WP15CT (3)
  • WP25CT (3)
  • WP35CT (3)
  • WS10PT (3)
  • WS25PT (3)
  • WU10HT (3)
  • WU10PT (3)
  • WU25PT (3)
  • X00511 (3)
Hand Of Tool
  • L (1)
  • R (2)
Minimum Axial Groove Diameter
  • 1.2598 (2)
  • 1.26 (1)
to
Rake Angle Style
  • DOUBLE NEGATIVE (1)
  • DOUBLE POSITIVE (2)
Maximum Bore Depth
  • 58.0 (1)
  • 60.0 (1)
  • 75.0 (1)
to
Maximum Bore Depth
  • 2.2835 (1)
  • 2.362 (1)
  • 2.9528 (1)
to
Wiper Insert
  • N (3)
  • Y (3)
insertGeometry
Cutting Tool Material
  • B H (3)
  • B L (3)
  • C A (3)
  • C N (3)
  • D P (3)
  • H T (3)
  • H W (3)
backEnd
System Size
  • KM32 (2)
  • KM32TS (1)
Back-End Diameter
  • 1.258 (1)
  • 1.2598 (2)
to
other
Over All Length [L]
  • 70.0 (2)
  • 90.0 (1)
to
Over All Length [L]
  • 2.7559 (1)
  • 2.756 (1)
  • 3.5433 (1)
to
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 3 of 3 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
1023841 KM32TSS25EMCLNL12 KM32TSS25EMCLNL12 32.0000 1.260 17.0000 .6690 60.0000 2.362 70.0000 2.756 CNMA120408/CNMA432 0.28 0.61
    List price:
    $364.32 /each.
    Your price::
    Qty
    1023866 KM32TSS25GMCLNR12 KM32TSS25GMCLNR12 32.0000 1.259 17.0000 .6693 75.0000 2.952 90.0000 3.543 CN..120408/CN..432    
      List price:
      $364.32 /each.
      Your price::
      Qty
      1023729 KM32TSS25EMCLNR12 KM32TSS25EMCLNR12 32.0000 1.259 17.0000 .6693 58.0000 2.283 70.0000 2.755 CN..120408/CN..432    
        List price:
        $364.32 /each.
        Your price::
        Qty
        List price:
        Discount: %
        Your price::
        Replacement This item is not available
        Replacement Product This item may be available through a distributor
        Qty

        Sold in pkg. of

        product-image
        Please adjust the following properties from

        ISO Catalog

        ANSI Catalog

        to find similar products.
        If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
        You are about to create a duplicate . Do you want to proceed?
        You are about to delete Do you want to proceed?
        What would you like to rename your to?
        Please enter a valid name
        Please enter a name for the duplicate
        Please enter a valid name
        You are about to add to your My Solutions page. Do you want to proceed?
        Please enter a valid name
        Send a copy of

        Please enter a valid Email
        Please enter a valid name

        We have found the following CAD Drawings

        Select the files you are looking for and download them all at once

        You should be logged to see your dashboard information
        The product/s () you were trying to add to the cart is/are not available, please contact customer service.
        item(s) successfully added to the cart
        View Cart