successfully added to cart
View Cart

Notifications

Mark all as read

刀片

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (156)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (156)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (156)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (156)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (156)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (156)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (156)
  • M Stainless Steel (256)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (256)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (256)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (256)
  • K Cast Iron (256)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (256)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (256)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (256)
  • N Non-Ferrous Materials (100)
    • N1
      Wrought Aluminum
      (100)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (100)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (100)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (100)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (100)
    • N6
      Carbon, Graphite Composites, CFRP
      (100)
    • N7
      MMC's
      (100)
  • S High-Temp Alloys (156)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (156)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (156)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (156)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (156)
Select All Star
  • CN (22)
  • DE (24)
  • GB (1)
  • IN (3)
  • SG (23)
  • US (21)
Applications
Applications
  • ID Thread Turning ID Thread Turning (100)
Cutting Diameter
Cutting Diameter
  • 0.63 in (3)
  • 0.638 in (2)
  • 0.641 in (3)
  • 0.65 in (3)
  • 0.656 in (3)
  • 0.669 in (3)
  • 0.672 in (3)
  • 0.689 in (2)
  • 0.69 in (3)
  • 0.694 in (2)
  • 0.702 in (2)
  • 0.704 in (2)
  • 0.709 in (3)
  • 0.719 in (2)
  • 0.728 in (3)
  • 0.734 in (2)
  • 0.74 in (2)
  • 0.748 in (3)
  • 0.75 in (3)
  • 0.756 in (2)
  • 0.759 in (2)
  • 0.766 in (2)
  • 0.768 in (3)
  • 0.776 in (2)
  • 0.781 in (3)
  • 0.787 in (3)
  • 0.791 in (2)
  • 0.795 in (2)
  • 0.797 in (2)
  • 0.799 in (2)
  • 0.803 in (2)
  • 0.807 in (3)
  • 0.811 in (2)
  • 0.814 in (2)
  • 0.816 in (2)
  • 0.82 in (2)
  • 0.824 in (2)
  • 0.828 in (3)
  • 0.844 in (2)
  • 0.846 in (3)
  • 0.866 in (3)
  • 0.875 in (2)
  • 0.884 in (2)
  • 0.886 in (3)
  • 0.906 in (3)
  • 0.925 in (3)
  • 0.937 in (2)
  • 0.946 in (3)
  • 0.965 in (3)
  • 0.969 in (2)
  • 0.984 in (3)
  • 1.0 in (3)
  • 1.004 in (3)
  • 1.012 in (4)
  • 1.014 in (2)
  • 1.016 in (2)
  • 1.024 in (3)
  • 1.032 in (2)
  • 1.039 in (3)
  • 1.043 in (3)
  • 1.047 in (2)
  • 1.063 in (3)
  • 1.083 in (3)
  • 1.094 in (2)
  • 1.102 in (3)
  • 1.109 in (2)
  • 1.122 in (3)
  • 1.125 in (2)
  • 1.143 in (3)
  • 1.156 in (2)
  • 1.161 in (3)
  • 1.172 in (2)
  • 1.181 in (3)
  • 1.188 in (2)
  • 1.201 in (3)
  • 1.219 in (2)
  • 1.22 in (3)
  • 1.24 in (3)
  • 1.25 in (3)
  • 1.26 in (3)
  • 1.28 in (3)
  • 1.299 in (3)
  • 1.313 in (2)
  • 1.339 in (3)
  • 1.344 in (2)
  • 1.375 in (2)
  • 1.379 in (3)
  • 1.399 in (3)
  • 1.417 in (3)
  • 1.437 in (3)
  • 1.457 in (3)
  • 1.476 in (3)
  • 1.496 in (3)
  • 1.5 in (3)
  • 1.508 in (1)
  • 1.516 in (3)
  • 1.536 in (3)
  • 1.547 in (1)
  • 1.555 in (3)
  • 1.575 in (3)
Cutting Diameter Min to Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 16.0 mm (3)
  • 16.2 mm (2)
  • 16.276 mm (3)
  • 16.5 mm (3)
  • 16.675 mm (3)
  • 17.0 mm (3)
  • 17.075 mm (3)
  • 17.475 mm (2)
  • 17.5 mm (3)
  • 17.6 mm (2)
  • 17.8 mm (2)
  • 17.85 mm (2)
  • 18.0 mm (3)
  • 18.25 mm (2)
  • 18.5 mm (3)
  • 18.651 mm (2)
  • 18.8 mm (2)
  • 19.0 mm (3)
  • 19.05 mm (3)
  • 19.201 mm (2)
  • 19.276 mm (2)
  • 19.451 mm (2)
  • 19.5 mm (3)
  • 19.701 mm (2)
  • 19.85 mm (3)
  • 20.0 mm (3)
  • 20.1 mm (2)
  • 20.201 mm (2)
  • 20.25 mm (2)
  • 20.3 mm (2)
  • 20.401 mm (2)
  • 20.5 mm (3)
  • 20.6 mm (2)
  • 20.651 mm (2)
  • 20.701 mm (2)
  • 20.8 mm (2)
  • 20.901 mm (2)
  • 21.0 mm (3)
  • 21.425 mm (2)
  • 21.5 mm (3)
  • 22.0 mm (3)
  • 22.225 mm (2)
  • 22.451 mm (2)
  • 22.5 mm (3)
  • 23.0 mm (3)
  • 23.5 mm (3)
  • 23.8 mm (2)
  • 24.0 mm (3)
  • 24.5 mm (3)
  • 24.6 mm (2)
  • 25.0 mm (3)
  • 25.401 mm (3)
  • 25.5 mm (3)
  • 25.675 mm (2)
  • 25.701 mm (2)
  • 25.75 mm (2)
  • 25.8 mm (2)
  • 26.0 mm (3)
  • 26.201 mm (2)
  • 26.401 mm (3)
  • 26.5 mm (3)
  • 26.6 mm (2)
  • 27.0 mm (3)
  • 27.5 mm (3)
  • 27.776 mm (2)
  • 28.0 mm (3)
  • 28.175 mm (2)
  • 28.5 mm (3)
  • 28.576 mm (2)
  • 29.0 mm (3)
  • 29.375 mm (2)
  • 29.5 mm (3)
  • 29.776 mm (2)
  • 30.0 mm (3)
  • 30.175 mm (2)
  • 30.5 mm (3)
  • 30.951 mm (2)
  • 31.0 mm (3)
  • 31.5 mm (3)
  • 31.75 mm (3)
  • 32.0 mm (3)
  • 32.5 mm (3)
  • 33.0 mm (3)
  • 33.35 mm (2)
  • 34.0 mm (3)
  • 34.125 mm (2)
  • 34.926 mm (2)
  • 35.0 mm (3)
  • 35.5 mm (3)
  • 36.0 mm (3)
  • 36.5 mm (3)
  • 37.0 mm (3)
  • 37.5 mm (3)
  • 38.0 mm (3)
  • 38.1 mm (3)
  • 38.301 mm (1)
  • 38.5 mm (3)
  • 39.0 mm (3)
  • 39.5 mm (3)
  • 40.0 mm (3)
Cutting Diameter Min to Cutting Diameter Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WM15PD (100)
  • WP40PD (156)
frontEnd
Point Angle
Point Angle
  • 140.0 (200)
  • 150.0 (56)
Point Angle Min to Point Angle Max
insertGeometry
Insert Seat Size
Insert Seat Size
  • A (14)
  • B (17)
  • C (12)
  • D (20)
  • E (26)
  • F (8)
  • G (10)
  • H (8)
  • I (8)
  • J (17)
  • K (13)
  • L (8)
  • M (10)
  • N (10)
  • O (10)
  • P (9)
  • Q (11)
  • R (13)
  • S (12)
  • T (20)
Cutting Diameter Insert
Cutting Diameter Insert
  • 0.63 in (3)
  • 0.638 in (2)
  • 0.641 in (3)
  • 0.65 in (3)
  • 0.656 in (3)
  • 0.669 in (3)
  • 0.672 in (3)
  • 0.689 in (2)
  • 0.69 in (3)
  • 0.694 in (2)
  • 0.702 in (2)
  • 0.704 in (2)
  • 0.709 in (3)
  • 0.719 in (2)
  • 0.728 in (3)
  • 0.734 in (2)
  • 0.74 in (2)
  • 0.748 in (3)
  • 0.75 in (3)
  • 0.756 in (2)
  • 0.759 in (2)
  • 0.766 in (2)
  • 0.768 in (3)
  • 0.776 in (2)
  • 0.781 in (3)
  • 0.787 in (3)
  • 0.791 in (2)
  • 0.795 in (2)
  • 0.797 in (2)
  • 0.799 in (2)
  • 0.803 in (2)
  • 0.807 in (3)
  • 0.811 in (2)
  • 0.814 in (2)
  • 0.816 in (2)
  • 0.82 in (2)
  • 0.824 in (2)
  • 0.828 in (3)
  • 0.844 in (2)
  • 0.846 in (3)
  • 0.866 in (3)
  • 0.875 in (2)
  • 0.884 in (2)
  • 0.886 in (3)
  • 0.906 in (3)
  • 0.925 in (3)
  • 0.937 in (2)
  • 0.946 in (3)
  • 0.965 in (3)
  • 0.969 in (2)
  • 0.984 in (3)
  • 1.0 in (3)
  • 1.004 in (3)
  • 1.012 in (4)
  • 1.014 in (2)
  • 1.016 in (2)
  • 1.024 in (3)
  • 1.032 in (2)
  • 1.039 in (3)
  • 1.043 in (3)
  • 1.047 in (2)
  • 1.063 in (3)
  • 1.083 in (3)
  • 1.094 in (2)
  • 1.102 in (3)
  • 1.109 in (2)
  • 1.122 in (3)
  • 1.125 in (2)
  • 1.143 in (3)
  • 1.156 in (2)
  • 1.161 in (3)
  • 1.172 in (2)
  • 1.181 in (3)
  • 1.188 in (2)
  • 1.201 in (3)
  • 1.219 in (2)
  • 1.22 in (3)
  • 1.24 in (3)
  • 1.25 in (3)
  • 1.26 in (3)
  • 1.28 in (3)
  • 1.299 in (3)
  • 1.313 in (2)
  • 1.339 in (3)
  • 1.344 in (2)
  • 1.375 in (2)
  • 1.379 in (3)
  • 1.399 in (3)
  • 1.417 in (3)
  • 1.437 in (3)
  • 1.457 in (3)
  • 1.476 in (3)
  • 1.496 in (3)
  • 1.5 in (3)
  • 1.508 in (1)
  • 1.516 in (3)
  • 1.536 in (3)
  • 1.547 in (1)
  • 1.555 in (3)
  • 1.575 in (3)
Cutting Diameter Insert Min to Cutting Diameter Insert Max
Cutting Diameter Insert
Cutting Diameter Insert
  • 16.0 mm (3)
  • 16.2 mm (2)
  • 16.276 mm (3)
  • 16.5 mm (3)
  • 16.675 mm (3)
  • 17.0 mm (3)
  • 17.075 mm (3)
  • 17.475 mm (2)
  • 17.5 mm (3)
  • 17.6 mm (2)
  • 17.8 mm (2)
  • 17.85 mm (2)
  • 18.0 mm (3)
  • 18.25 mm (2)
  • 18.5 mm (3)
  • 18.651 mm (2)
  • 18.8 mm (2)
  • 19.0 mm (3)
  • 19.05 mm (3)
  • 19.201 mm (2)
  • 19.276 mm (2)
  • 19.451 mm (2)
  • 19.5 mm (3)
  • 19.701 mm (2)
  • 19.85 mm (3)
  • 20.0 mm (3)
  • 20.1 mm (2)
  • 20.201 mm (2)
  • 20.25 mm (2)
  • 20.3 mm (2)
  • 20.401 mm (2)
  • 20.5 mm (3)
  • 20.6 mm (2)
  • 20.651 mm (2)
  • 20.701 mm (2)
  • 20.8 mm (2)
  • 20.901 mm (2)
  • 21.0 mm (3)
  • 21.425 mm (2)
  • 21.5 mm (3)
  • 22.0 mm (3)
  • 22.225 mm (2)
  • 22.451 mm (2)
  • 22.5 mm (3)
  • 23.0 mm (3)
  • 23.5 mm (3)
  • 23.8 mm (2)
  • 24.0 mm (3)
  • 24.5 mm (3)
  • 24.6 mm (2)
  • 25.0 mm (3)
  • 25.401 mm (3)
  • 25.5 mm (3)
  • 25.675 mm (2)
  • 25.701 mm (2)
  • 25.75 mm (2)
  • 25.8 mm (2)
  • 26.0 mm (3)
  • 26.201 mm (2)
  • 26.401 mm (3)
  • 26.5 mm (3)
  • 26.6 mm (2)
  • 27.0 mm (3)
  • 27.5 mm (3)
  • 27.776 mm (2)
  • 28.0 mm (3)
  • 28.175 mm (2)
  • 28.5 mm (3)
  • 28.576 mm (2)
  • 29.0 mm (3)
  • 29.375 mm (2)
  • 29.5 mm (3)
  • 29.776 mm (2)
  • 30.0 mm (3)
  • 30.175 mm (2)
  • 30.5 mm (3)
  • 30.951 mm (2)
  • 31.0 mm (3)
  • 31.5 mm (3)
  • 31.75 mm (3)
  • 32.0 mm (3)
  • 32.5 mm (3)
  • 33.0 mm (3)
  • 33.35 mm (2)
  • 34.0 mm (3)
  • 34.125 mm (2)
  • 34.926 mm (2)
  • 35.0 mm (3)
  • 35.5 mm (3)
  • 36.0 mm (3)
  • 36.5 mm (3)
  • 37.0 mm (3)
  • 37.5 mm (3)
  • 38.0 mm (3)
  • 38.1 mm (3)
  • 38.301 mm (1)
  • 38.5 mm (3)
  • 39.0 mm (3)
  • 39.5 mm (3)
  • 40.0 mm (3)
Cutting Diameter Insert Min to Cutting Diameter Insert Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

模块化钻头 • TOP DRILL™ 系列

TDMX • 刀片 • PK
(100 Products)
  • DrillingDrilling
  • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
  • Drilling: Inclined EntryDrilling: Inclined Entry
  • Drilling: Inclined ExitDrilling: Inclined Exit
  • Drilling: Stacked PlatesDrilling: Stacked Plates
  • 3851338513
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Drill Diameter [D1] Drill Diameter [L5] Drill Point Length [L5] Drill Point Length [SSC] Insert Seat Size
6568869 TDMX26500PKM TDMX26500PKM WP40PD   26.5000 1.043 5.2000 .2047 K
    List price:
    $146,28 /each.
    Your price::
    Qty
    6568871 TDMX27000PKM TDMX27000PKM WP40PD   27.0000 1.063 5.2900 .2083 L
      List price:
      $146,28 /each.
      Your price::
      Qty
      6568877 TDMX28575PKM TDMX11250PK WP40PD   28.5750 1.125 5.5900 .2201 M
        List price:
        $146,28 /each.
        Your price::
        Qty
        6568901 TDMX32000PKM TDMX32000PKM WP40PD   32.0000 1.259 6.2500 .2461 Q
          List price:
          $163,52 /each.
          Your price::
          Qty
          6568903 TDMX33000PKM TDMX33000PKM WP40PD   33.0000 1.299 6.4300 .2531 Q
            List price:
            $173,45 /each.
            Your price::
            Qty
            6568908 TDMX35000PKM TDMX35000PKM WP40PD   35.0000 1.378 6.7900 .2673 R
              List price:
              $183,37 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              模块化钻头 • TOP DRILL™ 系列

              TDMX • 刀片 • FPE
              (56 Products)
              • Drilling: Cross-Hole DrillingDrilling: Cross-Hole Drilling
              • Drilling: Stacked PlatesDrilling: Stacked Plates
              • DrillingDrilling
              • Drilling: Inclined EntryDrilling: Inclined Entry
              • Drilling: Inclined ExitDrilling: Inclined Exit
              • 2flute/4margin: coolant2flute/4margin: coolant
              View Products
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1] Drill Diameter [D1] Drill Diameter [L5] Drill Point Length [L5] Drill Point Length [SSC] Insert Seat Size
              6693131 TDMX20000FPEM TDMX20000FPEM WP40PD   20.0000 .7874 1.3900 .0547 E
                List price:
                $119,63 /each.
                Your price::
                Qty
                6693189 TDMX38100FPEM TDMX15000FPE WP40PD   38.1000 1.500 2.3100 .0909 T
                  List price:
                  $187,56 /each.
                  Your price::
                  Qty
                  6693190 TDMX38500FPEM TDMX38500FPEM WP40PD   38.5000 1.515 2.3200 .0913 T
                    List price:
                    $187,56 /each.
                    Your price::
                    Qty
                    6693191 TDMX39000FPEM TDMX39000FPEM WP40PD   39.0000 1.535 2.3200 .0913 T
                      List price:
                      $192,25 /each.
                      Your price::
                      Qty
                      6693192 TDMX39500FPEM TDMX39500FPEM WP40PD   39.5000 1.555 2.3300 .0917 T
                        List price:
                        $192,25 /each.
                        Your price::
                        Qty