欢迎
请确认您的首选项
更新首选项

Product Suggestions

Product Family suggestions

WIDIA 随时为您服务

有关于产品的问题吗?

查看按专业领域划分的全球服务专业人员的完整列表

快速订购
Item(s) successfully added to cart
查看购物车
回到解决方案

编辑解决方案

添加解决方案

解决方案名称: {{SolutionName}}
Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
工件材料
工件材料
  • P 钢 (15)
    • P0
      低碳钢，长切屑 C < .25%；<125 HB；<530 N/mm^2 UTS
      (15)
    • P1
      低碳钢、短切屑 C < .25%；<125 HB；<530 N/mm^2 UTS
      (15)
    • P2
      中碳钢和高碳钢 C < .25%；<220 HB；<25 HRC；>530 N/mm^2 UTS
      (15)
    • P3
      合金钢和工具钢 C > .25%；<330 HB；<35 HRC；600-850 N/mm^2 UTS
      (15)
    • P4
      合金钢和工具钢 C > .25%；350-420 HB；35-43 HRC；850-1400 N/mm^2 UTS
      (15)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB；<35 HRC；600-900 N/mm^2 UTS
      (15)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB；35-43 HRC；900-2400 N/mm^2 UTS
      (15)
  • M 不锈钢 (15)
    • M1
      奥氏体不锈钢 130-200 HB；<600 N/mm^2 UTS
      (15)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB；<25 HRC; >600 N/mm^2 UTS
      (15)
    • M3
      双相不锈钢 135-275 HB；<30 HRC; 500-1200 N/mm^2 UTS
      (15)
  • K 铸铁 (15)
    • K1
      灰口铸铁 120-290 HB；<32 HRC; 125-500 N/mm^2 UTS
      (15)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB；<28 HRC; <600 N/mm^2 UTS
      (15)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB；<43 HRC; >600 N/mm^2 UTS
      (15)
  • S 高温合金 (15)
    • S1
      铁基耐热合金 160-260 HB；25-48 HRC；500-1200 N/mm^2 UTS
      (15)
    • S2
      钴基耐热合金 250-450 HB；25-48 HRC；1000-1450 N/mm^2 UTS
      (15)
    • S3
      镍基耐热合金 160-450 HB；<48 HRC; 600-1700 N/mm^2 UTS
      (15)
    • S4
      钛和钛合金 300-400 HB；33-43 HRC；900-1600 N/mm^2 UTS
      (15)
  • H 淬火材料 (15)
    • H1
      淬火材料 44-48 HRC
      (15)
    • H2
      淬火材料 48-55 HRC
      (15)
    • H3
      淬火材料 56-60 HRC
      (15)
应用
应用
  • Face Milling Face Milling (22)
  • Pocket Pocket (22)
  • Pocket Helical Pocket Helical (22)
  • Pocket Milling Pocket Milling (22)
  • Ramping Ramping (22)
  • Shoulder Milling Shoulder Milling (22)
  • Shoulder Square End Shoulder Square End (22)
  • Slot Milling Slot Milling (22)
  • Slot Square End Slot Square End (22)
切削直径
切削直径
  • 0.375 in (1)
  • 0.394 in (3)
  • 0.473 in (4)
  • 0.5 in (2)
  • 0.625 in (1)
  • 0.626 in (1)
  • 0.63 in (4)
  • 0.75 in (2)
  • 0.787 in (4)
切削直径 Min to 切削直径 Max
切削直径
切削直径
  • 9.525 mm (1)
  • 10.0 mm (3)
  • 12.0 mm (4)
  • 12.701 mm (2)
  • 15.875 mm (1)
  • 15.9 mm (1)
  • 16.0 mm (4)
  • 19.05 mm (2)
  • 20.0 mm (4)
切削直径 Min to 切削直径 Max
最大切削直径
最大切削直径
  • 13.0 mm (4)
  • 17.0 mm (4)
最大切削直径 Min to 最大切削直径 Max
最大切削直径
最大切削直径
  • 0.512 in (4)
  • 0.669 in (4)
最大切削直径 Min to 最大切削直径 Max
切削长度
切削长度
  • 0.55 mm (3)
  • 0.601 mm (4)
  • 0.625 mm (3)
  • 0.9 mm (3)
  • 0.925 mm (3)
  • 1.1 mm (3)
  • 1.125 mm (3)
切削长度 Min to 切削长度 Max
切削长度
切削长度
  • 0.022 in (3)
  • 0.024 in (4)
  • 0.025 in (3)
  • 0.035 in (3)
  • 0.037 in (3)
  • 0.044 in (6)
切削长度 Min to 切削长度 Max
范围
范围
  • 0.984 in (1)
  • 1.181 in (1)
  • 1.575 in (1)
  • 1.772 in (3)
  • 1.8 in (1)
  • 1.969 in (3)
  • 2.0 in (2)
  • 2.244 in (3)
  • 2.299 in (1)
  • 2.301 in (1)
  • 2.757 in (3)
  • 2.801 in (2)
范围 Min to 范围 Max
范围
范围
  • 25.0 mm (1)
  • 30.0 mm (1)
  • 40.0 mm (1)
  • 45.0 mm (3)
  • 45.725 mm (1)
  • 50.0 mm (3)
  • 50.801 mm (2)
  • 57.0 mm (3)
  • 58.401 mm (1)
  • 58.426 mm (1)
  • 70.0 mm (3)
  • 71.125 mm (2)
范围 Min to 范围 Max
连接类型
连接类型
  • Screw-On Connection (3)
  • Straight-Cylindrical (19)
每个刀片的切削刃
每个刀片的切削刃
  • 0.0 (22)
  • 2.0 (18)
每个刀片的切削刃 Min to 每个刀片的切削刃 Max
cornerConfiguration
刀尖半径
刀尖半径
  • 0.012 in (15)
  • 0.02 in (15)
  • 0.024 in (1)
  • 0.025 in (3)
  • 0.03 in (4)
  • 0.031 in (3)
  • 0.039 in (17)
  • 0.047 in (2)
  • 0.049 in (4)
  • 0.063 in (2)
  • 0.079 in (4)
  • 0.08 in (8)
  • 0.12 in (4)
  • 0.158 in (4)
刀尖半径 Min to 刀尖半径 Max
刀尖半径
刀尖半径
  • 0.301 mm (15)
  • 0.5 mm (15)
  • 0.601 mm (1)
  • 0.625 mm (3)
  • 0.75 mm (4)
  • 0.8 mm (3)
  • 1.0 mm (17)
  • 1.201 mm (2)
  • 1.25 mm (4)
  • 1.6 mm (2)
  • 2.0 mm (4)
  • 2.025 mm (8)
  • 3.051 mm (4)
  • 4.025 mm (4)
刀尖半径 Min to 刀尖半径 Max
application
切削刀具材质
切削刀具材质
  • TN2505 (22)
  • TN2510 (15)
  • TN2525 (15)
  • TN6525 (20)
  • TN6540 (22)
  • WU10PM (15)
frontEnd
颈部直径
颈部直径
  • 0.346 in (4)
  • 0.417 in (5)
  • 0.559 in (5)
  • 0.701 in (1)
  • 0.706 in (3)
  • 0.707 in (1)
颈部直径 Min to 颈部直径 Max
颈部直径
颈部直径
  • 8.775 mm (4)
  • 10.601 mm (5)
  • 14.201 mm (5)
  • 17.776 mm (1)
  • 17.925 mm (3)
  • 17.95 mm (1)
颈部直径 Min to 颈部直径 Max
backEnd
连接类型
连接类型
  • CYLINDRICAL (19)
  • SCREW-ON (3)
后端直径
后端直径
  • 10.0 mm (3)
  • 12.0 mm (3)
  • 12.701 mm (3)
  • 13.0 mm (2)
  • 15.875 mm (2)
  • 16.0 mm (3)
  • 18.0 mm (1)
  • 19.05 mm (2)
  • 20.0 mm (3)
后端直径 Min to 后端直径 Max
后端直径
后端直径
  • 0.394 in (3)
  • 0.473 in (3)
  • 0.5 in (3)
  • 0.512 in (2)
  • 0.625 in (2)
  • 0.63 in (3)
  • 0.709 in (1)
  • 0.75 in (2)
  • 0.787 in (3)
后端直径 Min to 后端直径 Max
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

M270 高进给量 • 圆柱刀柄 • 公制 M270 高进给量 • 圆柱刀柄 • 公制

高进给刀体
(4 Products)
  • 刀柄 — 圆柱 平面刀柄 — 圆柱 平面
  • 侧铣/方肩铣削： 方头立铣侧铣/方肩铣削： 方头立铣
  • 槽铣： 方头立铣槽铣： 方头立铣
  • 端面铣削端面铣削
  • 坡铣： 毛坯坡铣： 毛坯
  • 刀座刀座
  • 螺旋铣削螺旋铣削
  • 铣削 — 贯通式冷却铣削 — 贯通式冷却
View Products
SAP 材料编号 ISO 目录编号 ANSI 目录编号 [D1] 有效的切削直径 [D1] 有效的切削直径 [D]适配接头/刀柄/镗孔直径 [D]适配接头/刀柄/镗孔直径 [D3] 颈部直径 [D3] 颈部直径 [L] 总长 [L] 总长 [L2] 刀头长度 [L2] 刀头长度 [AP1MAX] 第一个最大切深 [AP1MAX] 第一个最大切深 刀片数量 [Z] 排屑槽数量 Gage 刀片 最大 RPM 冷却液供应 重量（千克）
3926514 M270TD010A10L120 M270TD010A10L120 10.0000 .3937 10.0 .3937 8.7700 .3450 120.0000 4.724 45.0000 1.772 0.5600 .0220 1 2 M270HF10 57000 Y 0.06
    List price:
    $294.43 /each
    Your price::
    3926515 M270TD012A12L140 M270TD012A12L140 12.0000 .4724 12.0 .4724 10.6000 .4170 140.0000 5.512 50.0000 1.969 0.6200 .0240 1 2 M270HF12 55000 Y 0.09
      List price:
      $294.43 /each
      Your price::
      3926516 M270TD016A16L160 M270TD016A16L160 16.0000 .6299 16.0 .6299 14.2000 .5590 160.0000 6.299 57.0000 2.244 0.9200 .0360 1 2 M270HF16 53000 Y 0.19
        List price:
        $300.97 /each
        Your price::
        3926517 M270TD020A20L180 M270TD020A20L180 20.0000 .7874 20.0 .7874 17.9200 .7060 180.0000 7.087 70.0000 2.756 1.1200 .0440 1 2 M270HF20 52000 Y 0.35
          List price:
          $315.35 /each
          Your price::
          List price:
          Discount: %
          Your price::
          Replacement This item is no longer available
          Replacement Product Please contact customer service for assistance

          ORIGINAL PRODUCT

          M270 高进给量 • 硬质合金圆柱刀柄 • 公制 M270 高进给量 • 硬质合金圆柱刀柄 • 公制

          高进给刀体
          (8 Products)
          • 刀柄 — 圆柱 平面刀柄 — 圆柱 平面
          • 侧铣/方肩铣削： 方头立铣侧铣/方肩铣削： 方头立铣
          • 槽铣： 方头立铣槽铣： 方头立铣
          • 端面铣削端面铣削
          • 坡铣： 毛坯坡铣： 毛坯
          • 刀座刀座
          • 螺旋铣削螺旋铣削
          • 铣削 — 贯通式冷却铣削 — 贯通式冷却
          View Products
          SAP 材料编号 ISO 目录编号 ANSI 目录编号 [D1] 有效的切削直径 [D1] 有效的切削直径 [D]适配接头/刀柄/镗孔直径 [D]适配接头/刀柄/镗孔直径 [D3] 颈部直径 [D3] 颈部直径 [L] 总长 [L] 总长 [L2] 刀头长度 [L2] 刀头长度 [AP1MAX] 第一个最大切深 [AP1MAX] 第一个最大切深 刀片数量 [Z] 排屑槽数量 Gage 刀片 最大 RPM 冷却液供应 重量（千克）
          3926518 M270TD010A10L120C M270TD010A10L120C 10.0000 .3937 10.0 .3937 8.7700 .3450 120.0000 4.724 45.0000 1.772 0.5600 .0220 1 2 M270HF10 57000 Y 0.11
            List price:
            $509.42 /each
            Your price::
            3926519 M270TD010A10L150C M270TD010A10L150C 10.0000 .3937 10.0 .3937 8.7700 .3450 150.0000 5.906 45.0000 1.772 0.5600 .0220 1 2 M270HF10 57000 Y 0.14
              List price:
              $605.93 /each
              Your price::
              3926520 M270TD012A12L120C M270TD012A12L120C 12.0000 .4724 12.0 .4724 10.6100 .4180 120.0000 4.724 50.0000 1.969 0.6200 .0240 1 2 M270HF12 55000 Y 0.15
                List price:
                $595.71 /each
                Your price::
                3926521 M270TD012A12L160C M270TD012A12L160C 12.0000 .4724 12.0 .4724 10.6100 .4180 160.0000 6.299 50.0000 1.969 0.6200 .0240 1 2 M270HF12 55000 Y 0.22
                  List price:
                  $680.02 /each
                  Your price::
                  3926522 M270TD016A16L140C M270TD016A16L140C 16.0000 .6299 16.0 .6299 14.2000 .5590 140.0000 5.512 57.0000 2.244 0.9200 .0360 1 2 M270HF16 53000 Y 0.32
                    List price:
                    $797.77 /each
                    Your price::
                    3926543 M270TD016A16L180C M270TD016A16L180C 16.0000 .6299 16.0 .6299 14.2000 .5590 180.0000 7.087 57.0000 2.244 0.9200 .0360 1 2 M270HF16 53000 Y 0.44
                      List price:
                      $911.73 /each
                      Your price::
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is no longer available
                      Replacement Product Please contact customer service for assistance

                      ORIGINAL PRODUCT

                      M270 高进给量 • 环形 • 螺口式 • 公制 M270 高进给量 • 环形 • 螺口式 • 公制

                      高进给刀体
                      (3 Products)
                      • 刀柄 — 旋入式刀柄 — 旋入式
                      • 侧铣/方肩铣削： 方头立铣侧铣/方肩铣削： 方头立铣
                      • 槽铣： 方头立铣槽铣： 方头立铣
                      • 端面铣削端面铣削
                      • 坡铣： 毛坯坡铣： 毛坯
                      • 刀座刀座
                      • 螺旋铣削螺旋铣削
                      • 铣削 — 贯通式冷却铣削 — 贯通式冷却
                      View Products
                      SAP 材料编号 ISO 目录编号 ANSI 目录编号 [D1] 有效的切削直径 [D1] 有效的切削直径 [D]适配接头/刀柄/镗孔直径 [D]适配接头/刀柄/镗孔直径 [DPM] 机床侧定位孔直径 [DPM] 机床侧定位孔直径 [G3X] 外部连接螺纹尺寸 [L] 总长 [L] 总长 [L2] 刀头长度 [L2] 刀头长度 [WF] 平面宽度 [WF] 平面宽度 [AP1MAX] 第一个最大切深 [AP1MAX] 第一个最大切深 刀片数量 [Z] 排屑槽数量 Gage 刀片 最大 RPM 冷却液供应 重量（千克）
                      3926546 M270TD012M08 M270TD012M08 12.0000 .4724 13.0 .5118 8.5000 .3350 M8 42.0000 1.654 25.0000 .9840 10.0000 .3940 0.6000 .0236 1 2 M270HF12 55000 Y 0.02
                        List price:
                        $294.43 /each
                        Your price::
                        3926547 M270TD016M08 M270TD016M08 16.0000 .6299 13.0 .5118 8.5000 .3350 M8 47.0000 1.850 30.0000 1.181 10.0000 .3940 0.9000 .0354 1 2 M270HF16 53000 Y 0.09
                          List price:
                          $300.97 /each
                          Your price::
                          3926548 M270TD020M10 M270TD020M10 20.0000 .7874 18.0 .7087 10.5000 .4130 M10 59.0000 2.323 40.0000 1.575 14.0000 .5510 1.1000 .0433 1 2 M270HF20 52000 Y 0.07
                            List price:
                            $315.35 /each
                            Your price::
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is no longer available
                            Replacement Product Please contact customer service for assistance

                            ORIGINAL PRODUCT

                            M270 High Feed • Cylindrical Shank M270 High Feed • Cylindrical Shank

                            High-Feed Tool Bodies
                            (3 Products)
                            • 刀柄 — 圆柱 平面刀柄 — 圆柱 平面
                            • 侧铣/方肩铣削： 方头立铣侧铣/方肩铣削： 方头立铣
                            • 槽铣： 方头立铣槽铣： 方头立铣
                            • 端面铣削端面铣削
                            • 坡铣： 毛坯坡铣： 毛坯
                            • 刀座刀座
                            • 螺旋铣削螺旋铣削
                            • 铣削 — 贯通式冷却铣削 — 贯通式冷却
                            View Products
                            SAP 材料编号 ISO 目录编号 ANSI 目录编号 [D1] 有效的切削直径 [D1] 有效的切削直径 [D]适配接头/刀柄/镗孔直径 [D]适配接头/刀柄/镗孔直径 [D3] 颈部直径 [D3] 颈部直径 [L] 总长 [L] 总长 [L2] 刀头长度 [L2] 刀头长度 [AP1MAX] 第一个最大切深 [AP1MAX] 第一个最大切深 刀片数量 [Z] 排屑槽数量 Gage 刀片 最大 RPM 冷却液供应 重量（磅）
                            3904064 M270TD050C050L575 M270TD050C050L575 12.7000 .5000 12.7 .5 10.6000 .4173 146.0500 5.750 50.8000 2.000 0.6000 .0236 1 2 M270HF0500 55000 Y 0.24
                              List price:
                              $294.43 /each
                              Your price::
                              3904065 M270TD062C062L600 M270TD062C062L600 15.9000 .6250 15.875 .625 14.2000 .5591 152.4000 6.000 58.4100 2.300 0.9000 .0354 1 2 M270HF0625 53000 Y 0.40
                                List price:
                                $300.97 /each
                                Your price::
                                3904066 M270TD075C075L700 M270TD075C075L700 19.0500 .7500 19.05 .75 17.9500 .7067 177.8000 7.000 71.1200 2.800 1.1000 .0433 1 2 M270HF0750 52000 Y 0.70
                                  List price:
                                  $315.35 /each
                                  Your price::
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is no longer available
                                  Replacement Product Please contact customer service for assistance

                                  ORIGINAL PRODUCT

                                  M270 High Feed • Carbide Cylindrical Shank M270 High Feed • Carbide Cylindrical Shank

                                  High-Feed Tool Bodies
                                  (4 Products)
                                  • 刀柄 — 圆柱 平面刀柄 — 圆柱 平面
                                  • 侧铣/方肩铣削： 方头立铣侧铣/方肩铣削： 方头立铣
                                  • 槽铣： 方头立铣槽铣： 方头立铣
                                  • 端面铣削端面铣削
                                  • 坡铣： 毛坯坡铣： 毛坯
                                  • 刀座刀座
                                  • 螺旋铣削螺旋铣削
                                  • 铣削 — 贯通式冷却铣削 — 贯通式冷却
                                  View Products
                                  SAP 材料编号 ISO 目录编号 ANSI 目录编号 材质 [D1] 有效的切削直径 [D1] 有效的切削直径 [D]适配接头/刀柄/镗孔直径 [D]适配接头/刀柄/镗孔直径 [D3] 颈部直径 [D3] 颈部直径 [L] 总长 [L] 总长 [L2] 刀头长度 [L2] 刀头长度 [AP1MAX] 第一个最大切深 [AP1MAX] 第一个最大切深 刀片数量 [Z] 排屑槽数量 Gage 刀片 最大 RPM 冷却液供应 重量（磅）
                                  2639258 M270TD037C050L555C M270TD037C050L555C W 9.5250 .3750 12.7 .5 8.7630 .3450 140.9700 5.550 45.7200 1.800 0.6000 .0236 1 2 M270HF0375 57000 Y 0.44
                                    List price:
                                    $543.60 /each
                                    Your price::
                                    2639259 M270TD050C050L575C M270TD050C050L575C W 12.7000 .5000 12.7 .5 10.5920 .4170 146.0500 5.750 50.8000 2.000 0.6000 .0236 1 2 M270HF0500 55000 Y 0.55
                                      List price:
                                      $588.39 /each
                                      Your price::
                                      2639260 M270TD062C062L600C M270TD062C062L600C W 15.8750 .6250 15.875 .625 14.1990 .5590 152.4000 6.000 58.4200 2.300 0.9000 .0354 1 2 M270HF0625 53000 Y 0.88
                                        List price:
                                        $735.47 /each
                                        Your price::
                                        2639261 M270TD075C075L700C M270TD075C075L700C W 19.0500 .7500 19.05 .75 17.7800 .7070 177.8000 7.000 71.1200 2.800 1.1000 .0433 1 2 M270HF0750 52000 Y 1.32
                                          List price:
                                          $844.21 /each
                                          Your price::
                                          List price:
                                          Discount: %
                                          Your price::
                                          Replacement This item is no longer available
                                          Replacement Product Please contact customer service for assistance
                                          product-image
                                          Please adjust the following properties from

                                          ISO Catalog

                                          ANSI Catalog

                                          to find similar products.

                                          The following CAD files are available

                                          Please select a file to download

                                          Can’t find the file type you’re looking for?

                                          You are about to create a duplicate . Do you want to proceed?
                                          You are about to delete Do you want to proceed?
                                          What would you like to rename your to?
                                          Please enter a valid name
                                          Please enter a name for the duplicate
                                          Please enter a valid name
                                          You are about to add to your My Solutions page. Do you want to proceed?
                                          Please enter a valid name
                                          Send a copy of

                                          Please enter a valid Email
                                          Please enter a valid name

                                          The following CAD files are available

                                          Please select a file to download

                                          Can’t find the file type you’re looking for?
                                          Request Drawings »

                                          You should be logged to see your dashboard information
                                          Session expired due to inactivity, please login again
                                          The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                          item(s) successfully added to the cart
                                          View Cart
                                          DOWNLOAD TYPE:



                                          . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                                          Minimum quantity should be

                                          SAP Material Number ISO Catalog Grade    
                                          Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                                          You are about to leave the Solution building process.

                                          Are you sure you want to leave?