successfully added to cart
View Cart

Notifications

Mark all as read
Mobile Menu
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
工件材料
工件材料
  • P (55)
    • P0
      低碳钢,长切屑 C < .25%;<125 HB;<530 N/mm^2 UTS
      (55)
    • P1
      低碳钢、短切屑 C < .25%;<125 HB;<530 N/mm^2 UTS
      (55)
    • P2
      中碳钢和高碳钢 C < .25%;<220 HB;<25 HRC;>530 N/mm^2 UTS
      (55)
    • P3
      合金钢和工具钢 C > .25%;<330 HB;<35 HRC;600-850 N/mm^2 UTS
      (55)
    • P4
      合金钢和工具钢 C > .25%;350-420 HB;35-43 HRC;850-1400 N/mm^2 UTS
      (55)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB;<35 HRC;600-900 N/mm^2 UTS
      (55)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB;35-43 HRC;900-2400 N/mm^2 UTS
      (55)
  • M 不锈钢 (55)
    • M1
      奥氏体不锈钢 130-200 HB;<600 N/mm^2 UTS
      (55)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB;<25 HRC; >600 N/mm^2 UTS
      (55)
    • M3
      双相不锈钢 135-275 HB;<30 HRC; 500-1200 N/mm^2 UTS
      (55)
  • K 铸铁 (55)
    • K1
      灰口铸铁 120-290 HB;<32 HRC; 125-500 N/mm^2 UTS
      (55)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB;<28 HRC; <600 N/mm^2 UTS
      (55)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB;<43 HRC; >600 N/mm^2 UTS
      (55)
  • N 非铁金属材料 (53)
    • N1
      铝型材
      (53)
    • N2
      低硅铝合金和镁合金 硅 < 12.2%
      (53)
    • N3
      高硅铝合金 硅 > 12.2%
      (38)
    • N4
      可机加工转位范围为 70 到 100 的铜基、黄铜基、锌基
      (53)
    • N5
      尼龙、塑料、橡胶、酚醛塑料、树脂、玻璃纤维
      (53)
    • N6
      碳、石墨复合材料、CFRP
      (45)
    • N7
      MMC
      (53)
  • S 高温合金 (55)
    • S1
      铁基耐热合金 160-260 HB;25-48 HRC;500-1200 N/mm^2 UTS
      (55)
    • S2
      钴基耐热合金 250-450 HB;25-48 HRC;1000-1450 N/mm^2 UTS
      (55)
    • S3
      镍基耐热合金 160-450 HB;<48 HRC; 600-1700 N/mm^2 UTS
      (55)
    • S4
      钛和钛合金 300-400 HB;33-43 HRC;900-1600 N/mm^2 UTS
      (55)
  • H 淬火材料 (45)
    • H1
      淬火材料 44-48 HRC
      (45)
    • H2
      淬火材料 48-55 HRC
      (41)
    • H3
      淬火材料 56-60 HRC
      (38)
    • H4
      淬火材料 >60 HRC
      (38)
应用
应用
  • Chamfer Turning Chamfer Turning (5)
  • Cut-Off Cut-Off (4)
  • Deep Grooving Deep Grooving (4)
  • Face Grooving Face Grooving (4)
  • Facing Facing (30)
  • Grooving Grooving (6)
  • ID Grooving ID Grooving (1)
  • ID Thread Turning ID Thread Turning (3)
  • Multiple Direction Cutting Multiple Direction Cutting (45)
  • OD Thread Turning OD Thread Turning (9)
  • Plunge Turning Plunge Turning (5)
  • Profiling Profiling (37)
  • TRN Boring TRN Boring (26)
  • Threading Threading (10)
  • Turning Turning (46)
螺纹类型
螺纹类型
  • 55 (4)
  • 60 (11)
  • ACME (8)
  • API (4)
  • API RD (8)
  • BSPT (4)
  • BSW (8)
  • BUTTRESS (7)
  • M (9)
  • NPT (8)
  • NPTF (4)
  • RD DIN 405 (4)
  • STUB ACME (8)
  • TR DIN 103 (4)
  • UN (11)
  • UNJ (8)
切削条件
切削条件
  • Heavily Interrupted Cut (51)
  • Interrupted (23)
  • Lightly Interrupted Cut (51)
  • Smooth Cut (51)
  • Varying Depth of Cut (51)
刀具切削刃角度
刀具切削刃角度
  • 45.0 (1)
  • 62.5 (3)
  • 90.0 (12)
  • 93.0 (18)
  • 95.0 (14)
  • 107.5 (7)
刀具切削刃角度 Min to 刀具切削刃角度 Max
连接类型
连接类型
  • KM (31)
每个刀片的切削刃
每个刀片的切削刃
  • 1.0 (39)
  • 2.0 (41)
  • 3.0 (8)
  • 4.0 (30)
  • 6.0 (7)
  • 8.0 (13)
每个刀片的切削刃 Min to 每个刀片的切削刃 Max
内部冷却液性能
内部冷却液性能
cornerConfiguration
刀尖半径
刀尖半径
  • 0.001 in (8)
  • 0.002 in (17)
  • 0.003 in (11)
  • 0.004 in (49)
  • 0.005 in (6)
  • 0.006 in (7)
  • 0.007 in (7)
  • 0.008 in (46)
  • 0.01 in (7)
  • 0.011 in (7)
  • 0.012 in (5)
  • 0.014 in (12)
  • 0.015 in (2)
  • 0.016 in (48)
  • 0.017 in (4)
  • 0.019 in (4)
  • 0.02 in (7)
  • 0.023 in (4)
  • 0.024 in (2)
  • 0.028 in (1)
  • 0.03 in (5)
  • 0.031 in (51)
  • 0.035 in (4)
  • 0.037 in (1)
  • 0.039 in (7)
  • 0.047 in (51)
  • 0.049 in (7)
  • 0.06 in (7)
  • 0.062 in (8)
  • 0.063 in (27)
  • 0.069 in (7)
  • 0.078 in (4)
  • 0.079 in (4)
  • 0.089 in (4)
  • 0.094 in (3)
  • 0.095 in (7)
刀尖半径 Min to 刀尖半径 Max
刀尖半径
刀尖半径
  • 0.025 mm (8)
  • 0.05 mm (17)
  • 0.076 mm (11)
  • 0.1 mm (49)
  • 0.125 mm (6)
  • 0.151 mm (7)
  • 0.176 mm (7)
  • 0.2 mm (46)
  • 0.225 mm (6)
  • 0.25 mm (7)
  • 0.275 mm (7)
  • 0.301 mm (5)
  • 0.325 mm (6)
  • 0.351 mm (10)
  • 0.375 mm (2)
  • 0.4 mm (48)
  • 0.426 mm (4)
  • 0.45 mm (4)
  • 0.476 mm (2)
  • 0.5 mm (7)
  • 0.576 mm (4)
  • 0.601 mm (2)
  • 0.701 mm (1)
  • 0.75 mm (5)
  • 0.775 mm (7)
  • 0.8 mm (44)
  • 0.9 mm (4)
  • 0.925 mm (1)
  • 1.0 mm (7)
  • 1.201 mm (51)
  • 1.25 mm (7)
  • 1.5 mm (7)
  • 1.576 mm (8)
  • 1.6 mm (27)
  • 1.75 mm (7)
  • 1.975 mm (4)
  • 2.0 mm (4)
  • 2.25 mm (4)
  • 2.375 mm (3)
  • 2.401 mm (7)
刀尖半径 Min to 刀尖半径 Max
application
最小切削深度
最小切削深度
最小进给
最小进给
切削刀具材质
切削刀具材质
  • K10M (35)
  • K10U (33)
  • K15U (33)
  • K20K (35)
  • K25M (34)
  • K313 (49)
  • K68 (42)
  • KB9610 (33)
  • KBH10 (33)
  • KBH20 (36)
  • KC5010 (55)
  • KC5025 (53)
  • KC5410 (41)
  • KC5510 (32)
  • KC720 (39)
  • KC730 (49)
  • KC7310 (34)
  • KC732 (32)
  • KC8050 (44)
  • KC810 (46)
  • KC850 (48)
  • KC9010 (43)
  • KC9025 (44)
  • KC910 (40)
  • KC9105 (42)
  • KC9110 (51)
  • KC9120 (44)
  • KC9125 (44)
  • KC9140 (34)
  • KC9215 (34)
  • KC9225 (44)
  • KC9240 (44)
  • KC9240NEW (44)
  • KC9245 (34)
  • KC9315 (44)
  • KC9320 (49)
  • KC9325 (42)
  • KC935 (51)
  • KC950 (40)
  • KC990 (43)
  • KCK05 (44)
  • KCK05B (38)
  • KCK15 (42)
  • KCK15B (44)
  • KCK20 (48)
  • KCK20B (49)
  • KCM15 (44)
  • KCM15B (44)
  • KCM25 (44)
  • KCM25B (42)
  • KCM35 (37)
  • KCP05 (42)
  • KCP05B (34)
  • KCP10 (44)
  • KCP10B (51)
  • KCP25 (44)
  • KCP25B (51)
  • KCP25C (44)
  • KCP30 (44)
  • KCS10B (37)
  • KCU10 (51)
  • KCU25 (49)
  • KT175 (38)
  • KT315 (51)
  • KU10T (49)
  • KU30T (49)
  • TN10P (50)
  • TN10U (34)
  • TN15M (39)
  • TN15U (33)
  • TN20K (37)
  • TN20P (44)
  • TN30M (44)
  • TN5015 (33)
  • TN5105 (33)
  • TN5120 (33)
  • TN6010 (36)
  • TN6025 (35)
  • TN7005 (31)
  • TN7010 (35)
  • TN7015 (35)
  • TN7025 (35)
  • TN7105 (32)
  • TN7110 (40)
  • TN7115 (33)
  • TN8025 (36)
  • WBH20P (34)
  • WK05CT (42)
  • WK20CT (42)
  • WM15CT (42)
  • WM25CT (42)
  • WM35CT (32)
  • WP15CT (42)
  • WP25CT (42)
  • WP35CT (42)
  • WS10PT (42)
  • WS25PT (41)
  • WU10HT (44)
  • WU10PT (41)
  • WU25PT (41)
刀具手式
刀具手式
  • L (14)
  • N (4)
  • R (13)
修光刃刀片
修光刃刀片
  • N (55)
  • Y (36)
F 尺寸
F 尺寸
  • 0.0 mm (4)
  • 17.0 mm (2)
  • 22.0 mm (25)
F 尺寸 Min to F 尺寸 Max
F 尺寸
F 尺寸
  • 0.0 in (4)
  • 0.669 in (2)
  • 0.866 in (25)
F 尺寸 Min to F 尺寸 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 0.0 mm (4)
  • 32.0 mm (3)
  • 40.0 mm (4)
  • 41.301 mm (2)
  • 44.0 mm (16)
  • 47.6 mm (2)
  • 54.0 mm (2)
  • 56.625 mm (2)
  • 74.0 mm (2)
  • 88.9 mm (4)
  • 139.701 mm (2)
  • 174.601 mm (2)
最小轴向凹槽直径 Min to 最小轴向凹槽直径 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 0.0 in (4)
  • 1.26 in (3)
  • 1.575 in (4)
  • 1.627 in (2)
  • 1.732 in (16)
  • 1.874 in (2)
  • 2.126 in (2)
  • 2.229 in (2)
  • 2.914 in (2)
  • 3.5 in (4)
  • 5.5 in (2)
  • 6.875 in (2)
最小轴向凹槽直径 Min to 最小轴向凹槽直径 Max
最大轴向凹槽直径
最大轴向凹槽直径
  • 393.661 in (7)
最大轴向凹槽直径 Min to 最大轴向凹槽直径 Max
最大轴向凹槽直径
最大轴向凹槽直径
  • 9999.0 mm (7)
最大轴向凹槽直径 Min to 最大轴向凹槽直径 Max
切削方向
切削方向
  • B (6)
  • E (9)
  • S (16)
前角样式
前角样式
  • DOUBLE NEGATIVE (21)
  • NEGATIVE-ZERO (3)
  • NEUTRAL (ZERO) (7)
最大镗孔深度
最大镗孔深度
  • 1.379 in (24)
  • 3.132 in (1)
  • 3.15 in (2)
最大镗孔深度 Min to 最大镗孔深度 Max
最大镗孔深度
最大镗孔深度
  • 35.0 mm (24)
  • 79.551 mm (1)
  • 80.0 mm (2)
最大镗孔深度 Min to 最大镗孔深度 Max
镗杆材料
镗杆材料
  • S (3)
frontEnd
夹具样式
夹具样式
  • M (26)
  • N (7)
  • P (12)
  • S (10)
切削宽度
切削宽度
  • 0.02 in (3)
  • 0.031 in (3)
  • 0.035 in (3)
  • 0.039 in (7)
  • 0.041 in (3)
  • 0.047 in (7)
  • 0.055 in (3)
  • 0.058 in (3)
  • 0.06 in (7)
  • 0.061 in (1)
  • 0.062 in (7)
  • 0.067 in (3)
  • 0.069 in (7)
  • 0.073 in (4)
  • 0.077 in (3)
  • 0.078 in (4)
  • 0.079 in (7)
  • 0.088 in (7)
  • 0.089 in (7)
  • 0.095 in (7)
  • 0.097 in (4)
  • 0.098 in (7)
  • 0.105 in (4)
  • 0.108 in (7)
  • 0.11 in (4)
  • 0.119 in (7)
  • 0.122 in (4)
  • 0.125 in (7)
  • 0.126 in (7)
  • 0.128 in (7)
  • 0.129 in (3)
  • 0.131 in (2)
  • 0.138 in (7)
  • 0.143 in (4)
  • 0.147 in (1)
  • 0.15 in (3)
  • 0.152 in (3)
  • 0.156 in (4)
  • 0.157 in (4)
  • 0.167 in (4)
  • 0.169 in (4)
  • 0.177 in (4)
  • 0.178 in (4)
  • 0.181 in (2)
  • 0.185 in (4)
  • 0.188 in (4)
  • 0.189 in (4)
  • 0.192 in (2)
  • 0.193 in (2)
  • 0.195 in (4)
切削宽度 Min to 切削宽度 Max
切削宽度
切削宽度
  • 0.5 mm (3)
  • 0.775 mm (3)
  • 0.8 mm (3)
  • 0.9 mm (3)
  • 1.0 mm (7)
  • 1.05 mm (3)
  • 1.201 mm (7)
  • 1.401 mm (3)
  • 1.475 mm (3)
  • 1.5 mm (7)
  • 1.55 mm (1)
  • 1.576 mm (7)
  • 1.701 mm (3)
  • 1.75 mm (7)
  • 1.826 mm (4)
  • 1.951 mm (3)
  • 1.975 mm (4)
  • 2.0 mm (7)
  • 2.2 mm (7)
  • 2.225 mm (7)
  • 2.25 mm (7)
  • 2.401 mm (7)
  • 2.475 mm (4)
  • 2.5 mm (7)
  • 2.676 mm (4)
  • 2.75 mm (7)
  • 2.801 mm (4)
  • 3.0 mm (7)
  • 3.1 mm (4)
  • 3.176 mm (7)
  • 3.2 mm (7)
  • 3.25 mm (7)
  • 3.276 mm (3)
  • 3.325 mm (2)
  • 3.5 mm (7)
  • 3.6 mm (4)
  • 3.725 mm (1)
  • 3.801 mm (3)
  • 3.85 mm (3)
  • 3.95 mm (4)
  • 3.975 mm (2)
  • 4.0 mm (4)
  • 4.25 mm (4)
  • 4.3 mm (4)
  • 4.5 mm (4)
  • 4.525 mm (4)
  • 4.601 mm (2)
  • 4.7 mm (4)
  • 4.775 mm (4)
  • 4.801 mm (4)
  • 4.875 mm (2)
  • 4.9 mm (2)
  • 4.95 mm (4)
切削宽度 Min to 切削宽度 Max
刀片形状
刀片形状
  • C-DIAMOND/RHOMBIC 80 (9)
  • D-DIAMOND/RHOMBIC 55 (21)
  • LT-TRIANGLE LAY DOWN THREAD 60 (4)
  • S-SQUARE 90 (1)
  • T-TRIANGLE 60 (2)
  • TN-TOP NOTCH (7)
  • V-DIAMOND/RHOMBIC 35 (6)
  • W-TRIGON 80 (5)
刀片尺寸
刀片尺寸
  • 2 (3)
  • 3 (4)
最大切削深度
最大切削深度
  • 0.138 in (1)
  • 0.21 in (1)
最大切削深度 Min to 最大切削深度 Max
最大切削深度
最大切削深度
  • 3.5 mm (1)
  • 5.325 mm (1)
最大切削深度 Min to 最大切削深度 Max
insertGeometry
切削刀具材料
切削刀具材料
  • B H (43)
  • B L (38)
  • C A (24)
  • C N (33)
  • D P (37)
  • H T (51)
  • H W (55)
backEnd
连接类型
连接类型
  • TAPER SHANK (31)
系统规格
系统规格
  • KM32 (24)
  • KM32TS (7)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

  • 刀柄 —  KM-TS  ISO 26622刀柄 — KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • 冷却方式- 贯通式冷却  100 bar (1500 psi)  最大值冷却方式- 贯通式冷却 100 bar (1500 psi) 最大值
View Products
SAP 材料编号 ISO 目录编号 ANSI 目录编号 [L1] 刀具长度 [L1] 刀具长度 [F] F 尺寸 [F] F 尺寸 [DM] 最小镗孔直径 [DM] 最小镗孔直径 Gage 刀片
1144912 KM32TSMVUNL16 KM32TSMVUNL16 35.0000 1.378 27.0000 1.063 54.0000 2.126 VN..160408/VN..332
    List price:
    $279,15 /each.
    Your price::
    Qty
    1144911 KM32TSMVUNR16 KM32TSMVUNR16 35.0000 1.378 27.0000 1.063 54.0000 2.126 VN..160408/VN..332
      List price:
      $279,15 /each.
      Your price::
      Qty
      List price:
      Discount: %
      Your price::
      Replacement This item is no longer available
      Replacement Product Please contact customer service for assistance
      Qty

      Sold in pkg. of

      ORIGINAL PRODUCT

      • 刀柄 —  KM-TS  ISO 26622刀柄 — KM-TS ISO 26622
      • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
      • 冷却方式- 贯通式冷却  100 bar (1500 psi)  最大值冷却方式- 贯通式冷却 100 bar (1500 psi) 最大值
      View Products
      SAP 材料编号 ISO 目录编号 ANSI 目录编号 [L1] 刀具长度 [L1] 刀具长度 [F] F 尺寸 [F] F 尺寸 Gage 刀片 重量(千克) 重量(磅)
      1144915 KM32TSMWLNL08 KM32TSMWLNL08 35.0000 1.378 22.0000 .8660 WN..080408/WN..432 0.18 0.40
        List price:
        $271,12 /each.
        Your price::
        Qty
        1144914 KM32TSMWLNR08 KM32TSMWLNR08 35.0000 1.378 22.0000 .8660 WN..080408/WN..432 0.18 0.40
          List price:
          $271,12 /each.
          Your price::
          Qty
          List price:
          Discount: %
          Your price::
          Replacement This item is no longer available
          Replacement Product Please contact customer service for assistance
          Qty

          Sold in pkg. of

          ORIGINAL PRODUCT

          • 刀柄 —  KM-TS  ISO 26622刀柄 — KM-TS ISO 26622
          • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
          • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
          • 冷却方式- 贯通式冷却  100 bar (1500 psi)  最大值冷却方式- 贯通式冷却 100 bar (1500 psi) 最大值
          View Products
          SAP 材料编号 ISO 目录编号 ANSI 目录编号 [L1] 刀具长度 [L1] 刀具长度 [F] F 尺寸 [F] F 尺寸 [DM] 最小镗孔直径 [DM] 最小镗孔直径 Gage 刀片 重量(千克) 重量(磅)
          1135468 KM32TSPCLNL12 KM32TSPCLNL12 35.0000 1.378 22.0000 .8660 40.0000 1.575 CN..120408/CN..432 0.18 0.40
            List price:
            $498,05 /each.
            Your price::
            Qty
            1624632 KM32TSPCLNR12 KM32TSPCLNR12 35.0000 1.378 22.0000 .8661 40.0000 1.575 CN..120408/CN..432 0.18 0.40
              List price:
              $498,05 /each.
              Your price::
              Qty
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance
              Qty

              Sold in pkg. of

              ORIGINAL PRODUCT

              • 刀柄 —  KM-TS  ISO 26622刀柄 — KM-TS ISO 26622
              • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
              • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • 冷却方式- 贯通式冷却  100 bar (1500 psi)  最大值冷却方式- 贯通式冷却 100 bar (1500 psi) 最大值
              View Products
              SAP 材料编号 ISO 目录编号 ANSI 目录编号 [L1] 刀具长度 [L1] 刀具长度 [F] F 尺寸 [F] F 尺寸 [DM] 最小镗孔直径 [DM] 最小镗孔直径 Gage 刀片
              1144903 KM32TSMTUNR16 KM32TSMTUNR16 35.0000 1.378 22.0000 .8661 44.0000 1.732 TN..160408/TN..332
                List price:
                $271,12 /each.
                Your price::
                Qty
                List price:
                Discount: %
                Your price::
                Replacement This item is no longer available
                Replacement Product Please contact customer service for assistance
                Qty

                Sold in pkg. of

                ORIGINAL PRODUCT

                • 刀柄 —  KM-TS  ISO 26622刀柄 — KM-TS ISO 26622
                • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                • 冷却方式- 贯通式冷却  100 bar (1500 psi)  最大值冷却方式- 贯通式冷却 100 bar (1500 psi) 最大值
                View Products
                SAP 材料编号 ISO 目录编号 ANSI 目录编号 [L1] 刀具长度 [L1] 刀具长度 [F] F 尺寸 [F] F 尺寸 Gage 刀片
                1144910 KM32TSMVHNL16 KM32TSMVHNL16 35.0000 1.378 22.0000 .8661 VN..160408/VN..332
                  List price:
                  $279,15 /each.
                  Your price::
                  Qty
                  1144909 KM32TSMVHNR16 KM32TSMVHNR16 35.0000 1.378 22.0000 .8661 VN..160408/VN..332
                    List price:
                    $279,15 /each.
                    Your price::
                    Qty
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is no longer available
                    Replacement Product Please contact customer service for assistance
                    Qty

                    Sold in pkg. of

                    ORIGINAL PRODUCT

                    • 刀柄 —  KM-TS  ISO 26622刀柄 — KM-TS ISO 26622
                    • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                    • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                    • 冷却方式- 贯通式冷却  100 bar (1500 psi)  最大值冷却方式- 贯通式冷却 100 bar (1500 psi) 最大值
                    View Products
                    SAP 材料编号 ISO 目录编号 ANSI 目录编号 [L1] 刀具长度 [L1] 刀具长度 [F] F 尺寸 [F] F 尺寸 [DM] 最小镗孔直径 [DM] 最小镗孔直径 Gage 刀片 重量(千克) 重量(磅)
                    1232378 KM32TSPDJNL11 KM32TSPDJNL11 35.0000 1.378 22.0000 .8661 74.0000 2.913 DN..110408/DN..332 0.14 0.31
                      List price:
                      $408,14 /each.
                      Your price::
                      Qty
                      1232377 KM32TSPDJNR11 KM32TSPDJNR11 35.0000 1.378 22.0000 .8661 74.0000 2.913 DN..110408/DN..332 0.14 0.31
                        List price:
                        $343,96 /each.
                        Your price::
                        Qty
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is no longer available
                        Replacement Product Please contact customer service for assistance
                        Qty

                        Sold in pkg. of

                        ORIGINAL PRODUCT

                        • 刀柄 —  KM-TS  ISO 26622刀柄 — KM-TS ISO 26622
                        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                        • Coolant — Through Coolant  100 bar (1500 psi)  MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                        • 冷却方式- 贯通式冷却  100 bar (1500 psi)  最大值冷却方式- 贯通式冷却 100 bar (1500 psi) 最大值
                        View Products
                        SAP 材料编号 ISO 目录编号 ANSI 目录编号 [L1] 刀具长度 [L1] 刀具长度 [F] F 尺寸 [F] F 尺寸 [DM] 最小镗孔直径 [DM] 最小镗孔直径 Gage 刀片 重量(千克) 重量(磅)
                        1232374 KM32TSPWLNL06 KM32TSPWLNL06 35.0000 1.378 22.0000 .8661 44.0000 1.732 WN..060408/WN..332 0.19 0.42
                          List price:
                          $408,14 /each.
                          Your price::
                          Qty
                          1232372 KM32TSPWLNR06 KM32TSPWLNR06 35.0000 1.378 22.0000 .8661 44.0000 1.732 WN..060408/WN..332 0.19