Product Suggestions

Product Family suggestions

successfully added to cart
View Cart

Notifications

Mark all as read
Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (22)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (22)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (22)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (22)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (22)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (22)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (22)
  • M Stainless Steel (22)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (22)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (22)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (22)
  • K Cast Iron (22)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (22)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (22)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (22)
  • N Non-Ferrous Materials (22)
    • N1
      Wrought Aluminum
      (22)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (22)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (22)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (22)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (22)
    • N6
      Carbon, Graphite Composites, CFRP
      (22)
    • N7
      MMC's
      (22)
  • S High-Temp Alloys (22)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (22)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (22)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (22)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (22)
  • H Hardened Materials (22)
    • H1
      Hardened Materials 44-48 HRC
      (22)
    • H2
      Hardened Materials 48-55 HRC
      (19)
    • H3
      Hardened Materials 56-60 HRC
      (18)
    • H4
      Hardened Materials >60 HRC
      (18)
Applications
Applications
  • Facing Facing (18)
  • Grooving Grooving (1)
  • ID Grooving ID Grooving (1)
  • ID Thread Turning ID Thread Turning (5)
  • Multiple Direction Cutting Multiple Direction Cutting (18)
  • Profiling Profiling (17)
  • TRN Boring TRN Boring (17)
  • Threading Threading (5)
  • Turning Turning (18)
Type of Thread
Type of Thread
  • 55 (3)
  • 60 (4)
  • ACME (2)
  • API RD (2)
  • BSPT (3)
  • BSW (3)
  • BUTTRESS (1)
  • M (3)
  • NPT (3)
  • NPTF (3)
  • RD DIN 405 (2)
  • STUB ACME (2)
  • TR DIN 103 (2)
  • UN (4)
  • UNJ (3)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (19)
  • Interrupted (4)
  • Lightly Interrupted Cut (19)
  • Smooth Cut (19)
  • Varying Depth of Cut (19)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (4)
  • 93.0 (6)
  • 95.0 (12)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (19)
  • 2.0 (19)
  • 3.0 (3)
  • 4.0 (13)
  • 8.0 (3)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.001 in (2)
  • 0.002 in (3)
  • 0.003 in (3)
  • 0.004 in (15)
  • 0.006 in (2)
  • 0.008 in (21)
  • 0.01 in (1)
  • 0.016 in (18)
  • 0.02 in (1)
  • 0.028 in (1)
  • 0.03 in (1)
  • 0.031 in (19)
  • 0.037 in (1)
  • 0.039 in (1)
  • 0.047 in (12)
  • 0.049 in (1)
  • 0.06 in (1)
  • 0.062 in (3)
  • 0.063 in (5)
  • 0.069 in (1)
  • 0.094 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.025 mm (2)
  • 0.05 mm (3)
  • 0.076 mm (3)
  • 0.1 mm (15)
  • 0.151 mm (2)
  • 0.2 mm (21)
  • 0.225 mm (1)
  • 0.4 mm (18)
  • 0.5 mm (1)
  • 0.701 mm (1)
  • 0.75 mm (1)
  • 0.775 mm (1)
  • 0.8 mm (18)
  • 0.925 mm (1)
  • 1.0 mm (1)
  • 1.201 mm (12)
  • 1.25 mm (1)
  • 1.5 mm (1)
  • 1.576 mm (3)
  • 1.6 mm (5)
  • 1.75 mm (1)
  • 2.375 mm (1)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K313 (19)
  • K68 (21)
  • KB1345 (6)
  • KB1610 (15)
  • KB1630 (11)
  • KB5610 (13)
  • KB5625 (9)
  • KB5630 (9)
  • KB9610 (14)
  • KC250 (9)
  • KC5010 (21)
  • KC5025 (22)
  • KC525M (9)
  • KC5410 (19)
  • KC710 (9)
  • KC720 (22)
  • KC725M (12)
  • KC730 (22)
  • KC7310 (8)
  • KC732 (18)
  • KC8050 (18)
  • KC810 (19)
  • KC850 (19)
  • KC9010 (15)
  • KC9025 (18)
  • KC910 (19)
  • KC9105 (15)
  • KC9110 (19)
  • KC9120 (15)
  • KC9125 (18)
  • KC9225 (18)
  • KC9240 (18)
  • KC9240NEW (18)
  • KC925M (9)
  • KC9315 (18)
  • KC9320 (16)
  • KC9325 (15)
  • KC935 (19)
  • KC950 (16)
  • KC990 (18)
  • KCD25 (15)
  • KCK05 (18)
  • KCK15 (15)
  • KCK15B (15)
  • KCK20 (19)
  • KCK20B (19)
  • KCM15 (18)
  • KCM15B (13)
  • KCM25 (18)
  • KCM25B (15)
  • KCM35 (11)
  • KCP05 (18)
  • KCP10 (18)
  • KCP10B (19)
  • KCP25 (18)
  • KCP25B (19)
  • KCP30 (18)
  • KCPK05 (8)
  • KCPK30 (9)
  • KCS10 (17)
  • KCS10B (18)
  • KCU10 (19)
  • KCU25 (19)
  • KD050 (15)
  • KD100 (18)
  • KD105 (9)
  • KD120 (15)
  • KD1400 (18)
  • KD1405 (18)
  • KD1425 (18)
  • KT125 (8)
  • KT150 (8)
  • KT175 (19)
  • KT315 (19)
  • KTP10 (15)
  • KU10 (9)
  • KU10T (19)
  • KU30T (16)
  • SP4019 (8)
  • THM (8)
  • TN6025 (7)
  • TN7535 (9)
  • TTM08 (9)
  • TTR (12)
  • WBH10C (9)
  • WBH10P (13)
  • WBH10U (13)
  • WBH25P (16)
  • WBH30P (13)
  • WBK45U (13)
  • WDN00U (18)
  • WDN25U (18)
  • WK15CM (9)
  • WK20CT (15)
  • WM15CT (16)
  • WM25CT (13)
  • WP15CT (13)
  • WP25CT (18)
  • WP35CM (9)
  • WP40PM (9)
Hand Of Tool
Hand Of Tool
  • L (10)
  • R (12)
Wiper Insert
Wiper Insert
  • N (22)
  • Y (18)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 13.0 mm (3)
  • 16.0 mm (3)
  • 18.5 mm (1)
  • 20.0 mm (2)
  • 25.0 mm (5)
  • 32.0 mm (8)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.512 in (3)
  • 0.63 in (3)
  • 0.728 in (1)
  • 0.787 in (2)
  • 0.984 in (5)
  • 1.26 in (8)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (1)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (1)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (13)
  • E (5)
  • S (4)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (4)
  • DOUBLE POSITIVE (3)
  • NEGATIVE-ZERO (2)
  • NEUTRAL (ZERO) (7)
  • POSITIVE-ZERO (6)
Maximum Bore Depth
Maximum Bore Depth
  • 1.379 in (3)
  • 1.655 in (2)
  • 1.701 in (2)
  • 2.205 in (2)
  • 2.283 in (4)
  • 2.362 in (6)
  • 2.953 in (3)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 35.0 mm (3)
  • 42.0 mm (2)
  • 43.2 mm (2)
  • 56.0 mm (2)
  • 58.0 mm (4)
  • 60.0 mm (6)
  • 75.0 mm (3)
Maximum Bore Depth Min to Maximum Bore Depth Max
frontEnd
Clamp Style
Clamp Style
  • M (6)
  • N (1)
  • S (15)
Cutting Width
Cutting Width
  • 0.02 in (1)
  • 0.031 in (1)
  • 0.035 in (1)
  • 0.039 in (1)
  • 0.041 in (1)
  • 0.047 in (1)
  • 0.055 in (1)
  • 0.058 in (1)
  • 0.06 in (1)
  • 0.062 in (1)
  • 0.067 in (1)
  • 0.069 in (1)
  • 0.077 in (1)
  • 0.079 in (1)
  • 0.088 in (1)
  • 0.089 in (1)
  • 0.095 in (1)
  • 0.098 in (1)
  • 0.108 in (1)
  • 0.119 in (1)
  • 0.125 in (1)
  • 0.126 in (1)
  • 0.128 in (1)
  • 0.129 in (1)
  • 0.138 in (1)
  • 0.15 in (1)
  • 0.152 in (1)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (1)
  • 0.775 mm (1)
  • 0.8 mm (1)
  • 0.9 mm (1)
  • 1.0 mm (1)
  • 1.05 mm (1)
  • 1.201 mm (1)
  • 1.401 mm (1)
  • 1.475 mm (1)
  • 1.5 mm (1)
  • 1.576 mm (1)
  • 1.701 mm (1)
  • 1.75 mm (1)
  • 1.951 mm (1)
  • 2.0 mm (1)
  • 2.2 mm (1)
  • 2.225 mm (1)
  • 2.25 mm (1)
  • 2.401 mm (1)
  • 2.5 mm (1)
  • 2.75 mm (1)
  • 3.0 mm (1)
  • 3.176 mm (1)
  • 3.2 mm (1)
  • 3.25 mm (1)
  • 3.276 mm (1)
  • 3.5 mm (1)
  • 3.801 mm (1)
  • 3.85 mm (1)
Cutting Width Min to Cutting Width Max
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (12)
  • D-DIAMOND/RHOMBIC 55 (6)
  • LT-TRIANGLE LAY DOWN THREAD 60 (3)
  • TN-TOP NOTCH (1)
Insert Size
Insert Size
  • 2 (1)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.119 in (3)
  • 0.125 in (1)
  • 0.177 in (3)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 3.0 mm (3)
  • 3.176 mm (1)
  • 4.5 mm (3)
Maximum Cutting Depth Min to Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (15)
  • B L (18)
  • C A (4)
  • C N (4)
  • D P (18)
  • H T (19)
  • H W (22)
backEnd
System Size
System Size
  • KM32 (19)
  • KM32TS (3)
No filters matching ""
Narrow by category:
View Products in
Metric
Inch

ORIGINAL PRODUCT

KM32TS™ 内部切削装置

(3 Products)
  • 刀柄 — KM－TS ISO 26622刀柄 — KM－TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • 冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
1023841 KM32TSS25EMCLNL12 KM32TSS25EMCLNL12 32.0000 1.260 17.0000 .6690 60.0000 2.362 70.0000 2.756 CNMA120408/CNMA432 0.28 0.61
    List price:
    $399.69 /each.
    Your price::
    1023729 KM32TSS25EMCLNR12 KM32TSS25EMCLNR12 32.0000 1.259 17.0000 .6693 58.0000 2.283 70.0000 2.755 CN..120408/CN..432    
      List price:
      $399.69 /each.
      Your price::
      1023866 KM32TSS25GMCLNR12 KM32TSS25GMCLNR12 32.0000 1.259 17.0000 .6693 75.0000 2.952 90.0000 3.543 CN..120408/CN..432    
        List price:
        $399.69 /each.
        Your price::
        List price:
        Discount: %
        Your price::
        Replacement This item is no longer available
        Replacement Product Please contact customer service for assistance

        ORIGINAL PRODUCT

        KM32TS™ 内部切削装置

        (9 Products)
        • 刀柄 — KM－TS ISO 26622刀柄 — KM－TS ISO 26622
        • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
        • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
        • 冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值
        View Products
        SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
        1144615 KM32TSS10CSCLPL06 KM32TSS10CSCLPL06 13.0000 .5118 7.0000 .2756 35.0000 1.378 50.0000 1.968 CP..060204/CP..2151    
          List price:
          $374.50 /each.
          Your price::
          1144614 KM32TSS10CSCLPR06 KM32TSS10CSCLPR06 13.0000 .5118 7.0000 .2756 35.0000 1.378 50.0000 1.968 CP..060204/CP..2151    
            List price:
            $374.50 /each.
            Your price::
            1144617 KM32TSS12DSCLPL06 KM32TSS12DSCLPL06 16.0000 .6300 9.0000 .3540 43.2100 1.701 60.0000 2.362 CP..060204/CP..2151 0.13 0.29
              List price:
              $374.50 /each.
              Your price::
              1144616 KM32TSS12DSCLPR06 KM32TSS12DSCLPR06 16.0000 .6300 9.0000 .3540 43.2100 1.701 60.0000 2.362 CP..060204/CP..2151 0.13 0.29
                List price:
                $374.50 /each.
                Your price::
                1144619 KM32TSS16ESCLPL09 KM32TSS16ESCLPL09 20.0000 .7874 11.0000 .4331 56.0000 2.204 70.0000 2.755 CP..09T308/CP..3252    
                  List price:
                  $374.50 /each.
                  Your price::
                  1144618 KM32TSS16ESCLPR09 KM32TSS16ESCLPR09 20.0000 .7874 11.0000 .4331 56.0000 2.204 70.0000 2.755 CP..09T308/CP..3252    
                    List price:
                    $374.50 /each.
                    Your price::
                    List price:
                    Discount: %
                    Your price::
                    Replacement This item is no longer available
                    Replacement Product Please contact customer service for assistance

                    ORIGINAL PRODUCT

                    KM32TS™ 内部切削装置

                    (1 Products)
                    • 刀柄 — KM－TS ISO 26622刀柄 — KM－TS ISO 26622
                    • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                    • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                    • 冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值
                    View Products
                    SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert
                    1020727 KM32TSS12DNER2 KM32TSS12DNER2 18.5000 .7283 11.0000 .4331 42.0000 1.654 60.0000 2.362 NG2L
                      List price:
                      $399.69 /each.
                      Your price::
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is no longer available
                      Replacement Product Please contact customer service for assistance

                      ORIGINAL PRODUCT

                      KM32TS™ 内部切削装置

                      LT螺纹加工
                      (3 Products)
                      • 刀柄 — KM－TS ISO 26622刀柄 — KM－TS ISO 26622
                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                      • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                      • 冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值
                      View Products
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
                      1020454 KM32TSS10CLSER11 KM32TSS10CLSER11 13.0000 .5118 7.0000 .2756 35.0000 1.378 50.0000 1.968 LT11NR 0.11 0.24
                        List price:
                        $399.69 /each.
                        Your price::
                        1020458 KM32TSS20FLSER16 KM32TSS20FLSER16 25.0000 .9843 13.0000 .5118 60.0000 2.362 80.0000 3.149 LT16NR    
                          List price:
                          $384.31 /each.
                          Your price::
                          1020461 KM32TSS25GLSEL16 KM32TSS25GLSEL16 32.0000 1.259 17.0000 .6693 75.0000 2.953 90.0000 3.543 LT16NL    
                            List price:
                            $399.69 /each.
                            Your price::
                            List price:
                            Discount: %
                            Your price::
                            Replacement This item is no longer available
                            Replacement Product Please contact customer service for assistance

                            ORIGINAL PRODUCT

                            KM32TS™ 内部切削装置

                            (5 Products)
                            • 刀柄 — KM－TS ISO 26622刀柄 — KM－TS ISO 26622
                            • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                            • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                            • 冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值
                            View Products
                            SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert
                            1020683 KM32TSS12DSDUPL07 KM32TSS12DSDUPL07 16.0000 .6299 9.0000 .3543 42.0000 1.653 60.0000 2.362 DP..070204/DP..2151
                              List price:
                              $381.45 /each.
                              Your price::
                              1144658 KM32TSS20FSDUPL07 KM32TSS20FSDUPL07 25.0000 .9843 13.0000 .5118 60.0000 2.362 80.0000 3.149 DP..070204/DP..2151
                                List price:
                                $374.50 /each.
                                Your price::
                                1144657 KM32TSS20FSDUPR07 KM32TSS20FSDUPR07 25.0000 .9843 13.0000 .5118 60.0000 2.362 80.0000 3.149 DP..070204/DP..2151
                                  List price:
                                  $374.50 /each.
                                  Your price::
                                  1144746 KM32TSS25ESDUPL11 KM32TSS25ESDUPL11 32.0000 1.259 17.0000 .6693 58.0000 2.283 70.0000 2.755 DP..11T308/DP..3252
                                    List price:
                                    $374.50 /each.
                                    Your price::
                                    1144743 KM32TSS25ESDUPR11 KM32TSS25ESDUPR11 32.0000 1.259 17.0000 .6693 58.0000 2.283 70.0000 2.755 DP..11T308/DP..3252
                                      List price:
                                      $374.50 /each.
                                      Your price::
                                      List price:
                                      Discount: %
                                      Your price::
                                      Replacement This item is no longer available
                                      Replacement Product Please contact customer service for assistance

                                      ORIGINAL PRODUCT

                                      KM32TS™ 内部切削装置

                                      (1 Products)
                                      • 刀柄 — KM－TS ISO 26622刀柄 — KM－TS ISO 26622
                                      • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
                                      • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                                      • 冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值
                                      View Products
                                      SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert
                                      1023938 KM32TSS25GMDUNR15 KM32TSS25GMDUNR15 32.0000 1.259 17.0000 .6693 75.0000 2.952 90.0000 3.543 DN..150408/DN..432
                                        List price:
                                        $405.55 /each.
                                        Your price::
                                        List price:
                                        Discount: %
                                        Your price::
                                        Replacement This item is no longer available
                                        Replacement Product Please contact customer service for assistance

                                        联系我们

                                        （美国东部标准时间上午 8 点至下午 6 点提供服务）

                                        na.techsupport@widia.com

                                        公司

                                        加入我们的技术人员团队

                                        关于我们

                                        我们的品牌

                                        下载

                                        购买

                                        购买 WIDIA 商品

                                        在 Amazon 购买 WIDIA 产品

                                        语言

                                        语言

                                        保持联系

                                        加入我们的邮寄列表

                                        滚动到顶部

                                        © 2022 WIDIA 产品部 | 隐私政策

                                        product-image
                                        Please adjust the following properties from

                                        ISO Catalog

                                        ANSI Catalog

                                        to find similar products.
                                        You are about to create a duplicate . Do you want to proceed?
                                        You are about to delete Do you want to proceed?
                                        What would you like to rename your to?
                                        Please enter a valid name
                                        Please enter a name for the duplicate
                                        Please enter a valid name
                                        You are about to add to your My Solutions page. Do you want to proceed?
                                        Please enter a valid name
                                        Send a copy of

                                        Please enter a valid Email
                                        Please enter a valid name

                                        The following CAD files are available

                                        Please select a file to download

                                        Can’t find the file type you’re looking for?
                                        Request Drawings »

                                        You should be logged to see your dashboard information
                                        Session expired due to inactivity, please login again
                                        The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                        item(s) successfully added to the cart
                                        View Cart