欢迎
请确认您的首选项
更新首选项

Product Suggestions

Product Family suggestions

WIDIA 随时为您服务

有关于产品的问题吗?

查看按专业领域划分的全球服务专业人员的完整列表

快速订购
Item(s) successfully added to cart
查看购物车
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
工件材料
工件材料
  • P 钢 (14)
    • P0
      低碳钢，长切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (14)
    • P1
      低碳钢、短切屑 C < .25%；<125 HB；<530 N/mm^2 UTS (14)
    • P2
      中碳钢和高碳钢 C < .25%；<220 HB；<25 HRC；>530 N/mm^2 UTS (14)
    • P3
      合金钢和工具钢 C > .25%；<330 HB；<35 HRC；600-850 N/mm^2 UTS (14)
    • P4
      合金钢和工具钢 C > .25%；350-420 HB；35-43 HRC；850-1400 N/mm^2 UTS (14)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB；<35 HRC；600-900 N/mm^2 UTS (14)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB；35-43 HRC；900-2400 N/mm^2 UTS (14)
  • M 不锈钢 (14)
    • M1
      奥氏体不锈钢 130-200 HB；<600 N/mm^2 UTS (14)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB；<25 HRC; >600 N/mm^2 UTS (14)
    • M3
      双相不锈钢 135-275 HB；<30 HRC; 500-1200 N/mm^2 UTS (14)
  • K 铸铁 (14)
    • K1
      灰口铸铁 120-290 HB；<32 HRC; 125-500 N/mm^2 UTS (14)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB；<28 HRC; <600 N/mm^2 UTS (14)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB；<43 HRC; >600 N/mm^2 UTS (14)
  • N 非铁金属材料 (14)
    • N1
      铝型材 (14)
    • N2
      低硅铝合金和镁合金 硅 < 12.2% (14)
    • N3
      高硅铝合金 硅 > 12.2% (14)
    • N4
      可机加工转位范围为 70 到 100 的铜基、黄铜基、锌基 (14)
    • N5
      尼龙、塑料、橡胶、酚醛塑料、树脂、玻璃纤维 (14)
    • N6
      碳、石墨复合材料、CFRP (14)
    • N7
      MMC (14)
  • S 高温合金 (14)
    • S1
      铁基耐热合金 160-260 HB；25-48 HRC；500-1200 N/mm^2 UTS (14)
    • S2
      钴基耐热合金 250-450 HB；25-48 HRC；1000-1450 N/mm^2 UTS (14)
    • S3
      镍基耐热合金 160-450 HB；<48 HRC; 600-1700 N/mm^2 UTS (14)
    • S4
      钛和钛合金 300-400 HB；33-43 HRC；900-1600 N/mm^2 UTS (14)
  • H 淬火材料 (14)
    • H1
      淬火材料 44-48 HRC (14)
    • H2
      淬火材料 48-55 HRC (14)
    • H3
      淬火材料 56-60 HRC (10)
    • H4
      淬火材料 >60 HRC (10)
应用
应用
  • Chamfer Turning Chamfer Turning (6)
  • Cut-Off Cut-Off (6)
  • Deep Grooving Deep Grooving (6)
  • Face Grooving Face Grooving (6)
  • Facing Facing (14)
  • Grooving Grooving (12)
  • ID Grooving ID Grooving (2)
  • ID Thread Turning ID Thread Turning (6)
  • Multiple Direction Cutting Multiple Direction Cutting (6)
  • OD Thread Turning OD Thread Turning (12)
  • Plunge Turning Plunge Turning (6)
  • Profiling Profiling (6)
  • TRN Boring TRN Boring (8)
  • Threading Threading (6)
  • Turning Turning (14)
螺纹类型
螺纹类型
  • 60 (14)
  • ACME (10)
  • API (10)
  • API RD (6)
  • BSW (6)
  • BUTTRESS (14)
  • M (8)
  • NPT (6)
  • STUB ACME (6)
  • UN (14)
  • UNJ (6)
切削条件
切削条件
  • Heavily Interrupted Cut (14)
  • Lightly Interrupted Cut (14)
  • Smooth Cut (14)
  • Varying Depth of Cut (14)
刀具切削刃角度
刀具切削刃角度
  • 45.0 (2)
  • 90.0 (12)
刀具切削刃角度 Min to 刀具切削刃角度 Max
连接类型
连接类型
  • KM (8)
每个刀片的切削刃
每个刀片的切削刃
  • 1.0 (14)
  • 2.0 (14)
每个刀片的切削刃 Min to 每个刀片的切削刃 Max
内部冷却液性能
内部冷却液性能
总长 [L]
总长 [L]
  • 1.575 in (8)
  • 1.772 in (2)
  • 1.85 in (4)
总长 [L] Min to 总长 [L] Max
总长 [L]
总长 [L]
  • 40.0 mm (8)
  • 45.0 mm (2)
  • 47.0 mm (4)
总长 [L] Min to 总长 [L] Max
cornerConfiguration
刀尖半径
刀尖半径
  • 0.002 in (6)
  • 0.003 in (14)
  • 0.004 in (10)
  • 0.005 in (6)
  • 0.006 in (10)
  • 0.007 in (12)
  • 0.008 in (14)
  • 0.01 in (12)
  • 0.011 in (6)
  • 0.012 in (6)
  • 0.014 in (10)
  • 0.016 in (6)
  • 0.017 in (6)
  • 0.019 in (10)
  • 0.02 in (10)
  • 0.023 in (10)
  • 0.03 in (4)
  • 0.031 in (10)
  • 0.035 in (10)
  • 0.039 in (10)
  • 0.047 in (10)
  • 0.049 in (10)
  • 0.06 in (10)
  • 0.062 in (6)
  • 0.063 in (14)
  • 0.069 in (10)
  • 0.078 in (6)
  • 0.079 in (10)
  • 0.089 in (10)
  • 0.095 in (10)
  • 0.098 in (4)
  • 0.125 in (4)
刀尖半径 Min to 刀尖半径 Max
刀尖半径
刀尖半径
  • 0.05 mm (6)
  • 0.076 mm (14)
  • 0.1 mm (10)
  • 0.125 mm (6)
  • 0.151 mm (10)
  • 0.176 mm (12)
  • 0.2 mm (14)
  • 0.225 mm (6)
  • 0.25 mm (12)
  • 0.275 mm (6)
  • 0.301 mm (6)
  • 0.325 mm (10)
  • 0.351 mm (10)
  • 0.4 mm (6)
  • 0.426 mm (6)
  • 0.45 mm (10)
  • 0.476 mm (3)
  • 0.5 mm (10)
  • 0.576 mm (10)
  • 0.75 mm (4)
  • 0.775 mm (10)
  • 0.9 mm (10)
  • 1.0 mm (10)
  • 1.201 mm (10)
  • 1.25 mm (10)
  • 1.5 mm (10)
  • 1.576 mm (6)
  • 1.6 mm (14)
  • 1.75 mm (10)
  • 1.975 mm (6)
  • 2.0 mm (10)
  • 2.25 mm (10)
  • 2.401 mm (10)
  • 2.5 mm (4)
  • 3.176 mm (4)
刀尖半径 Min to 刀尖半径 Max
application
最小切削深度
最小切削深度
最小进给
最小进给
切削刀具材质
切削刀具材质
  • K2885 (10)
  • K313 (14)
  • K420 (14)
  • K4H (8)
  • K68 (14)
  • KB1345 (10)
  • KB1630 (10)
  • KB5625 (6)
  • KBH20 (3)
  • KC250 (10)
  • KC5010 (14)
  • KC5025 (14)
  • KC5410 (14)
  • KC710 (14)
  • KC720 (14)
  • KC722 (14)
  • KC730 (14)
  • KC732 (6)
  • KC810 (14)
  • KC850 (14)
  • KC910 (8)
  • KC9110 (14)
  • KC9120 (6)
  • KC9320 (14)
  • KC935 (14)
  • KC950 (14)
  • KCK20 (12)
  • KCK20B (14)
  • KCP10B (14)
  • KCP25B (14)
  • KCU10 (14)
  • KCU25 (14)
  • KD050 (3)
  • KD081 (6)
  • KD100 (8)
  • KD120 (10)
  • KD1425 (6)
  • KT175 (10)
  • KT315 (14)
  • KU10T (14)
  • KU25T (14)
  • KU30T (14)
  • KY3000 (10)
  • THM (10)
  • TN10P (10)
  • TN6010 (14)
  • TN6025 (14)
  • TN7110 (14)
  • WU10HT (3)
  • WU10PT (6)
  • WU25PT (3)
刀具手式
刀具手式
  • L (4)
  • R (4)
F 尺寸
F 尺寸
  • 27.0 mm (8)
F 尺寸 Min to F 尺寸 Max
F 尺寸
F 尺寸
  • 1.063 in (8)
F 尺寸 Min to F 尺寸 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 0.0 mm (6)
  • 41.301 mm (2)
  • 47.6 mm (2)
  • 54.0 mm (8)
  • 56.625 mm (2)
  • 57.2 mm (2)
  • 88.9 mm (4)
  • 139.701 mm (2)
  • 174.601 mm (2)
  • 209.601 mm (2)
  • 222.3 mm (2)
最小轴向凹槽直径 Min to 最小轴向凹槽直径 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 0.0 in (6)
  • 1.627 in (2)
  • 1.874 in (2)
  • 2.126 in (8)
  • 2.229 in (2)
  • 2.253 in (2)
  • 3.5 in (4)
  • 5.5 in (2)
  • 6.875 in (2)
  • 8.252 in (2)
  • 8.752 in (2)
最小轴向凹槽直径 Min to 最小轴向凹槽直径 Max
切削方向
切削方向
  • E (6)
  • S (2)
前角样式
前角样式
  • NEUTRAL (ZERO) (8)
最大镗孔深度
最大镗孔深度
  • 1.575 in (6)
  • 1.772 in (2)
最大镗孔深度 Min to 最大镗孔深度 Max
最大镗孔深度
最大镗孔深度
  • 40.0 mm (6)
  • 45.0 mm (2)
最大镗孔深度 Min to 最大镗孔深度 Max
镗杆材料
镗杆材料
  • S (2)
frontEnd
切削宽度
切削宽度
  • 0.02 in (4)
  • 0.031 in (4)
  • 0.035 in (4)
  • 0.039 in (10)
  • 0.041 in (4)
  • 0.047 in (10)
  • 0.055 in (4)
  • 0.058 in (4)
  • 0.06 in (10)
  • 0.061 in (2)
  • 0.062 in (10)
  • 0.067 in (4)
  • 0.069 in (10)
  • 0.073 in (6)
  • 0.077 in (4)
  • 0.078 in (6)
  • 0.079 in (10)
  • 0.088 in (10)
  • 0.089 in (7)
  • 0.094 in (3)
  • 0.095 in (10)
  • 0.097 in (6)
  • 0.098 in (10)
  • 0.105 in (6)
  • 0.108 in (10)
  • 0.11 in (6)
  • 0.119 in (14)
  • 0.122 in (6)
  • 0.125 in (14)
  • 0.126 in (14)
  • 0.128 in (10)
  • 0.129 in (4)
  • 0.131 in (3)
  • 0.138 in (14)
  • 0.143 in (6)
  • 0.147 in (2)
  • 0.15 in (4)
  • 0.152 in (4)
  • 0.156 in (6)
  • 0.157 in (10)
  • 0.167 in (10)
  • 0.169 in (6)
  • 0.177 in (10)
  • 0.178 in (6)
  • 0.185 in (8)
  • 0.188 in (10)
  • 0.189 in (10)
  • 0.192 in (3)
  • 0.193 in (3)
  • 0.195 in (6)
  • 0.197 in (4)
  • 0.202 in (4)
  • 0.213 in (4)
  • 0.217 in (4)
  • 0.219 in (4)
  • 0.237 in (4)
  • 0.25 in (4)
  • 0.255 in (4)
切削宽度 Min to 切削宽度 Max
切削宽度
切削宽度
  • 0.5 mm (4)
  • 0.775 mm (4)
  • 0.8 mm (4)
  • 0.9 mm (4)
  • 1.0 mm (10)
  • 1.05 mm (4)
  • 1.201 mm (10)
  • 1.401 mm (4)
  • 1.475 mm (4)
  • 1.5 mm (10)
  • 1.55 mm (2)
  • 1.576 mm (10)
  • 1.701 mm (4)
  • 1.75 mm (10)
  • 1.826 mm (6)
  • 1.951 mm (4)
  • 1.975 mm (6)
  • 2.0 mm (10)
  • 2.2 mm (10)
  • 2.225 mm (10)
  • 2.25 mm (7)
  • 2.375 mm (3)
  • 2.401 mm (10)
  • 2.475 mm (6)
  • 2.5 mm (10)
  • 2.676 mm (6)
  • 2.75 mm (10)
  • 2.801 mm (6)
  • 3.0 mm (14)
  • 3.1 mm (6)
  • 3.176 mm (14)
  • 3.2 mm (14)
  • 3.25 mm (10)
  • 3.276 mm (4)
  • 3.325 mm (3)
  • 3.5 mm (14)
  • 3.6 mm (6)
  • 3.725 mm (2)
  • 3.801 mm (4)
  • 3.85 mm (4)
  • 3.95 mm (6)
  • 3.975 mm (3)
  • 4.0 mm (10)
  • 4.25 mm (10)
  • 4.3 mm (6)
  • 4.5 mm (10)
  • 4.525 mm (6)
  • 4.7 mm (8)
  • 4.775 mm (10)
  • 4.801 mm (10)
  • 4.875 mm (3)
  • 4.9 mm (3)
  • 4.95 mm (6)
  • 5.0 mm (4)
  • 5.125 mm (4)
  • 5.4 mm (4)
  • 5.5 mm (4)
  • 5.575 mm (4)
  • 6.0 mm (4)
  • 6.351 mm (4)
  • 6.476 mm (4)
切削宽度 Min to 切削宽度 Max
刀片尺寸
刀片尺寸
  • 2 (4)
  • 3 (6)
  • 4 (4)
最大切削深度
最大切削深度
  • 0.138 in (2)
  • 0.294 in (2)
最大切削深度 Min to 最大切削深度 Max
最大切削深度
最大切削深度
  • 3.5 mm (2)
  • 7.476 mm (2)
最大切削深度 Min to 最大切削深度 Max
insertGeometry
切削刀具材料
切削刀具材料
  • B H (10)
  • B L (6)
  • C N (10)
  • D P (8)
  • H T (14)
  • H W (14)
backEnd
连接类型
连接类型
  • TAPER SHANK (8)
系统规格
系统规格
  • KM40TS (8)
No filters matching ""

NR 45°

(2) NR 45°

NS 93°

(6) NS 93°

NE 93°

(6) NE 93°
product-image
Please adjust the following properties from

ISO Catalog

ANSI Catalog

to find similar products.

The following files are available

Please select a file to download

Models

Product data

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

You are about to create a duplicate . Do you want to proceed?
You are about to delete Do you want to proceed?
What would you like to rename your to?
Please enter a valid name
Please enter a name for the duplicate
Please enter a valid name
You are about to add to your My Solutions page. Do you want to proceed?
Please enter a valid name
Send a copy of

Oops, you have used your own email address! Please enter another email address to proceed.

An active user does not exist under that email address. Please Click Here , to send a registration invitation to


Please enter a valid Email
Please enter a valid name
You should be logged to see your dashboard information
Session expired due to inactivity, please login again
The product/s () you were trying to add to the cart is/are not available, please contact customer service
item(s) successfully added to the cart
View Cart
DOWNLOAD TYPE:



. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?