successfully added to cart
View Cart
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (65)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (65)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (65)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (65)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (65)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (65)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (65)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (65)
  • M Stainless Steel (60)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (60)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (60)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (60)
  • K Cast Iron (67)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (67)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (67)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (67)
  • N Non-Ferrous Materials (49)
    • N1
      Wrought Aluminum
      (49)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (49)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (20)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (49)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (48)
    • N6
      Carbon, Graphite Composites, CFRP
      (47)
    • N7
      MMC's
      (46)
  • S High-Temp Alloys (62)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (62)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (62)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (62)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (60)
  • H Hardened Materials (41)
    • H1
      Hardened Materials 44-48 HRC
      (41)
    • H2
      Hardened Materials 48-55 HRC
      (39)
    • H3
      Hardened Materials 56-60 HRC
      (39)
    • H4
      Hardened Materials >60 HRC
      (38)
Applications
Applications
  • Chamfer Turning Chamfer Turning (1)
  • Cut-Off Cut-Off (1)
  • Deep Grooving Deep Grooving (1)
  • Face Grooving Face Grooving (1)
  • Facing Facing (45)
  • Grooving Grooving (9)
  • ID Grooving ID Grooving (8)
  • ID Thread Turning ID Thread Turning (8)
  • Multiple Direction Cutting Multiple Direction Cutting (44)
  • OD Thread Turning OD Thread Turning (9)
  • Plunge Turning Plunge Turning (1)
  • Profiling Profiling (28)
  • TRN Boring TRN Boring (42)
  • Threading Threading (9)
  • Turning Turning (59)
Type of Thread
Type of Thread
  • 60 (5)
  • ACME (7)
  • API (5)
  • API RD (5)
  • BSW (3)
  • BUTTRESS (5)
  • M (3)
  • NPT (3)
  • STUB ACME (3)
  • UN (5)
  • UNJ (3)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (62)
  • Interrupted (35)
  • Lightly Interrupted Cut (62)
  • Smooth Cut (62)
  • Varying Depth of Cut (62)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (5)
  • 62.5 (1)
  • 75.0 (15)
  • 90.0 (15)
  • 93.0 (10)
  • 95.0 (17)
  • 107.5 (4)
Tool Cutting Edge Angle Min to Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • KM (37)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (38)
  • 2.0 (43)
  • 3.0 (2)
  • 4.0 (50)
  • 6.0 (2)
  • 8.0 (38)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.051 mm (2)
  • 0.057 mm (1)
  • 0.066 mm (3)
  • 0.076 mm (5)
  • 0.08 mm (3)
  • 0.094 mm (3)
  • 0.097 mm (1)
  • 0.1 mm (15)
  • 0.102 mm (17)
  • 0.116 mm (2)
  • 0.117 mm (1)
  • 0.127 mm (3)
  • 0.131 mm (3)
  • 0.132 mm (3)
  • 0.133 mm (3)
  • 0.15 mm (3)
  • 0.155 mm (3)
  • 0.157 mm (3)
  • 0.16 mm (2)
  • 0.165 mm (5)
  • 0.173 mm (3)
  • 0.178 mm (3)
  • 0.19 mm (5)
  • 0.191 mm (5)
  • 0.198 mm (3)
  • 0.2 mm (15)
  • 0.202 mm (3)
  • 0.203 mm (10)
  • 0.224 mm (3)
  • 0.235 mm (3)
  • 0.244 mm (2)
  • 0.25 mm (3)
  • 0.251 mm (3)
  • 0.254 mm (5)
  • 0.269 mm (3)
  • 0.282 mm (3)
  • 0.284 mm (3)
  • 0.3 mm (3)
  • 0.315 mm (4)
  • 0.318 mm (7)
  • 0.33 mm (3)
  • 0.34 mm (10)
  • 0.343 mm (2)
  • 0.356 mm (3)
  • 0.397 mm (21)
  • 0.4 mm (25)
  • 0.404 mm (3)
  • 0.406 mm (17)
  • 0.43 mm (3)
  • 0.445 mm (5)
  • 0.472 mm (2)
  • 0.49 mm (3)
  • 0.508 mm (3)
  • 0.565 mm (1)
  • 0.57 mm (1)
  • 0.572 mm (7)
  • 0.575 mm (4)
  • 0.6 mm (2)
  • 0.787 mm (3)
  • 0.792 mm (9)
  • 0.794 mm (21)
  • 0.8 mm (40)
  • 0.826 mm (4)
  • 0.902 mm (5)
  • 1.0 mm (3)
  • 1.188 mm (4)
  • 1.19 mm (2)
  • 1.191 mm (32)
  • 1.194 mm (3)
  • 1.195 mm (1)
  • 1.2 mm (40)
  • 1.25 mm (3)
  • 1.5 mm (3)
  • 1.585 mm (3)
  • 1.587 mm (2)
  • 1.588 mm (35)
  • 1.59 mm (1)
  • 1.6 mm (49)
  • 1.75 mm (3)
  • 1.98 mm (1)
  • 1.981 mm (3)
  • 2.0 mm (5)
  • 2.25 mm (5)
  • 2.38 mm (4)
  • 2.381 mm (16)
  • 2.388 mm (5)
  • 2.39 mm (1)
  • 2.4 mm (31)
  • 2.5 mm (2)
  • 3.175 mm (2)
  • 3.18 mm (1)
  • 3.2 mm (18)
  • 4.0 mm (7)
  • 10.0 mm (1)
  • 12.5 mm (3)
  • 16.0 mm (2)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.002 in (2)
  • 0.0023 in (1)
  • 0.0026 in (3)
  • 0.003 in (5)
  • 0.0031 in (3)
  • 0.0037 in (3)
  • 0.0038 in (1)
  • 0.004 in (22)
  • 0.0046 in (3)
  • 0.005 in (3)
  • 0.0052 in (3)
  • 0.0053 in (3)
  • 0.0059 in (3)
  • 0.006 in (3)
  • 0.0062 in (3)
  • 0.0065 in (5)
  • 0.0068 in (3)
  • 0.007 in (3)
  • 0.0075 in (5)
  • 0.0078 in (3)
  • 0.0079 in (2)
  • 0.008 in (15)
  • 0.0083 in (2)
  • 0.0088 in (3)
  • 0.0093 in (3)
  • 0.0096 in (2)
  • 0.0099 in (3)
  • 0.01 in (5)
  • 0.0106 in (3)
  • 0.0111 in (3)
  • 0.0112 in (3)
  • 0.0118 in (3)
  • 0.0124 in (3)
  • 0.0125 in (7)
  • 0.013 in (10)
  • 0.0135 in (5)
  • 0.014 in (3)
  • 0.0156 in (25)
  • 0.0159 in (3)
  • 0.016 in (24)
  • 0.017 in (3)
  • 0.0175 in (5)
  • 0.0186 in (2)
  • 0.0193 in (3)
  • 0.02 in (3)
  • 0.0225 in (7)
  • 0.031 in (30)
  • 0.0312 in (21)
  • 0.0313 in (40)
  • 0.0315 in (2)
  • 0.0325 in (4)
  • 0.0355 in (5)
  • 0.0394 in (3)
  • 0.0468 in (4)
  • 0.0469 in (40)
  • 0.047 in (38)
  • 0.0472 in (2)
  • 0.0492 in (3)
  • 0.0591 in (3)
  • 0.0625 in (54)
  • 0.063 in (30)
  • 0.0689 in (3)
  • 0.078 in (3)
  • 0.0787 in (5)
  • 0.0886 in (5)
  • 0.0928 in (5)
  • 0.0938 in (36)
  • 0.094 in (23)
  • 0.0984 in (2)
  • 0.106 in (1)
  • 0.125 in (9)
  • 0.126 in (11)
  • 0.1563 in (4)
  • 0.1575 in (7)
  • 0.312 in (7)
  • 0.3935 in (1)
  • 0.3937 in (1)
  • 0.4922 in (3)
  • 0.6299 in (2)
  • 0.63 in (2)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • 13E (29)
  • 241 (2)
  • CG4 (1)
  • CL4 (25)
  • CM2 (28)
  • CM3 (25)
  • CM4 (6)
  • CM5 (1)
  • CPX (34)
  • CW2 (9)
  • CW2015 (31)
  • CW3020 (2)
  • CW5025 (33)
  • GX (18)
  • HK1500 (19)
  • HT2 (9)
  • HTX (2)
  • K060 (9)
  • K090 (38)
  • K1 (23)
  • K10M (38)
  • K10P (31)
  • K10U (19)
  • K15U (19)
  • K20K (38)
  • K21 (17)
  • K25M (23)
  • K25P (34)
  • K2885 (3)
  • K313 (44)
  • K35P (25)
  • K420 (47)
  • K45 (10)
  • K4H (3)
  • K68 (46)
  • KB1340 (4)
  • KB1345 (12)
  • KB1610 (12)
  • KB1625 (10)
  • KB1630 (15)
  • KB5610 (12)
  • KB5625 (13)
  • KB5630 (10)
  • KB9610 (19)
  • KB9640 (6)
  • KBH10 (19)
  • KBH10B (17)
  • KBH20 (19)
  • KBH20B (17)
  • KBK35 (4)
  • KBK45 (2)
  • KC210 (29)
  • KC250 (29)
  • KC5010 (57)
  • KC5025 (47)
  • KC5410 (43)
  • KC5510 (38)
  • KC5525 (16)
  • KC710 (7)
  • KC720 (28)
  • KC722 (7)
  • KC730 (39)
  • KC7310 (38)
  • KC732 (19)
  • KC8050 (51)
  • KC810 (47)
  • KC850 (60)
  • KC9010 (41)
  • KC9025 (50)
  • KC910 (41)
  • KC9105 (31)
  • KC9110 (58)
  • KC9120 (52)
  • KC9125 (53)
  • KC9140 (50)
  • KC9145 (46)
  • KC9210 (7)
  • KC9215 (38)
  • KC9225 (38)
  • KC9240 (53)
  • KC9240NEW (48)
  • KC9245 (38)
  • KC9315 (39)
  • KC9320 (43)
  • KC9325 (38)
  • KC935 (48)
  • KC950 (49)
  • KC990 (44)
  • KCD25 (5)
  • KCK05 (38)
  • KCK05B (38)
  • KCK15 (38)
  • KCK15B (39)
  • KCK20 (44)
  • KCK20B (49)
  • KCM15 (38)
  • KCM15B (31)
  • KCM25 (46)
  • KCM25B (45)
  • KCM35 (38)
  • KCM35B (30)
  • KCP05 (23)
  • KCP05B (25)
  • KCP10 (53)
  • KCP10B (51)
  • KCP25 (53)
  • KCP25B (59)
  • KCP30 (51)
  • KCP30B (47)
  • KCP40 (47)
  • KCP40B (47)
  • KCPK05 (39)
  • KCS10 (3)
  • KCS10B (38)
  • KCU10 (57)
  • KCU25 (47)
  • KD050 (12)
  • KD081 (13)
  • KD100 (14)
  • KD120 (15)
  • KD1400 (12)
  • KD1405 (10)
  • KD1425 (15)
  • KM1 (10)
  • KMF (2)
  • KT1120 (5)
  • KT125 (17)
  • KT150 (10)
  • KT175 (20)
  • KT315 (24)
  • KT325 (9)
  • KT5020 (3)
  • KTP10 (5)
  • KU10T (24)
  • KU25T (5)
  • KU30T (43)
  • KY1310 (15)
  • KY1320 (33)
  • KY1525 (2)
  • KY1540 (17)
  • KY1615 (32)
  • KY2000 (21)
  • KY2100 (9)
  • KY3000 (43)
  • KY3400 (30)
  • KY3500 (40)
  • KY4000 (9)
  • KY4300 (21)
  • KY4400 (33)
  • KYHK15B (33)
  • KYK10 (11)
  • KYK25 (23)
  • KYK35 (40)
  • KYS25 (17)
  • KYS30 (19)
  • MC2 (1)
  • NL200 (9)
  • NL250 (38)
  • NL300 (41)
  • NL400 (22)
  • NL920 (22)
  • P25 (2)
  • PB100 (2)
  • PB170 (2)
  • PB250 (2)
  • PB300 (2)
  • PS5 (9)
  • SP0819 (30)
  • SP3019 (23)
  • SP4019 (21)
  • SP4036 (3)
  • SP4093 (3)
  • SPADAP (26)
  • SPN4W2 (7)
  • THM (28)
  • THM-X (2)
  • THMF-X (2)
  • TN10P (35)
  • TN10U (19)
  • TN15M (38)
  • TN15U (19)
  • TN2000 (27)
  • TN20K (38)
  • TN20P (38)
  • TN30M (38)
  • TN30P (40)
  • TN4000 (27)
  • TN5015 (30)
  • TN5020 (30)
  • TN5105 (16)
  • TN5120 (35)
  • TN6010 (22)
  • TN6025 (19)
  • TN7005 (16)
  • TN7010 (36)
  • TN7015 (47)
  • TN7025 (47)
  • TN7035 (31)
  • TN7105 (11)
  • TN7110 (28)
  • TN7115 (47)
  • TN7125 (42)
  • TN7135 (31)
  • TN8025 (46)
  • TTI15 (9)
  • TTM09 (7)
  • TTR (3)
  • TTR-X (7)
  • TTS (24)
  • TTX (9)
  • W00342 (7)
  • WBH10C (19)
  • WBH10P (10)
  • WBH10U (12)
  • WBH20P (19)
  • WBH25P (10)
  • WBH25U (14)
  • WBH30P (10)
  • WBK40U (4)
  • WBK45U (14)
  • WDN00U (7)
  • WDN25U (12)
  • WK05CT (38)
  • WK15CT (11)
  • WK20CT (38)
  • WM15CT (38)
  • WM25CT (45)
  • WM35CT (38)
  • WP05CT (4)
  • WP15CT (50)
  • WP25CT (50)
  • WP35CT (50)
  • WS10PT (38)
  • WS25PT (38)
  • WU10HT (33)
  • WU10PT (16)
  • WU25PT (15)
  • X00511 (2)
Hand Of Tool
Hand Of Tool
  • L (14)
  • N (7)
  • R (16)
Wiper Insert
Wiper Insert
  • N (67)
  • Y (18)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 in (1)
  • 1.626 in (1)
  • 1.874 in (1)
  • 3.5 in (1)
  • 3.937 in (7)
  • 4.173 in (34)
  • 5.5 in (1)
  • 5.906 in (1)
  • 6.874 in (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.0 mm (1)
  • 41.3 mm (1)
  • 47.6 mm (1)
  • 88.9 mm (1)
  • 100.0 mm (7)
  • 106.0 mm (34)
  • 139.7 mm (1)
  • 150.0 mm (1)
  • 174.6 mm (1)
Minimum Axial Groove Diameter Min to Minimum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 9999.0 mm (8)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
  • 393.661 in (8)
Maximum Axial Groove Diameter Min to Maximum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (8)
  • E (5)
  • S (24)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (27)
  • NEGATIVE-ZERO (3)
  • NEUTRAL (ZERO) (5)
Maximum Bore Depth
Maximum Bore Depth
  • 70.0 mm (42)
Maximum Bore Depth Min to Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 2.756 in (42)
Maximum Bore Depth Min to Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • S (10)
frontEnd
Adapter Front-End
Adapter Front-End
  • CARTRIDGE MOUNT (1)
Clamp Style
Clamp Style
  • M (42)
  • N (9)
  • P (16)
Cutting Width
Cutting Width
  • 1.0 mm (3)
  • 1.19 mm (1)
  • 1.194 mm (3)
  • 1.2 mm (3)
  • 1.5 mm (3)
  • 1.57 mm (3)
  • 1.575 mm (3)
  • 1.75 mm (3)
  • 1.829 mm (3)
  • 1.981 mm (3)
  • 2.0 mm (3)
  • 2.2 mm (3)
  • 2.235 mm (3)
  • 2.24 mm (2)
  • 2.25 mm (1)
  • 2.388 mm (3)
  • 2.39 mm (1)
  • 2.464 mm (3)
  • 2.5 mm (3)
  • 2.667 mm (3)
  • 2.743 mm (3)
  • 2.75 mm (3)
  • 2.794 mm (3)
  • 2.997 mm (3)
  • 3.0 mm (5)
  • 3.099 mm (3)
  • 3.17 mm (3)
  • 3.175 mm (5)
  • 3.18 mm (1)
  • 3.2 mm (5)
  • 3.25 mm (3)
  • 3.251 mm (3)
  • 3.32 mm (2)
  • 3.329 mm (2)
  • 3.5 mm (5)
  • 3.607 mm (3)
  • 3.96 mm (3)
  • 3.962 mm (3)
  • 3.974 mm (2)
  • 3.988 mm (3)
  • 4.0 mm (5)
  • 4.24 mm (1)
  • 4.242 mm (5)
  • 4.25 mm (2)
  • 4.3 mm (3)
  • 4.5 mm (5)
  • 4.521 mm (3)
  • 4.699 mm (4)
  • 4.775 mm (5)
  • 4.78 mm (1)
  • 4.785 mm (1)
  • 4.788 mm (1)
  • 4.8 mm (3)
  • 4.801 mm (5)
  • 4.81 mm (3)
  • 4.88 mm (2)
  • 4.95 mm (3)
  • 5.0 mm (2)
  • 5.004 mm (4)
  • 5.131 mm (2)
  • 5.41 mm (2)
  • 5.5 mm (2)
  • 5.537 mm (2)
  • 5.563 mm (2)
  • 6.0 mm (4)
  • 6.35 mm (6)
  • 6.36 mm (1)
  • 6.48 mm (2)
  • 7.01 mm (2)
  • 7.137 mm (4)
  • 7.925 mm (4)
  • 8.001 mm (1)
  • 8.738 mm (2)
  • 8.992 mm (2)
  • 9.525 mm (4)
  • 9.65 mm (2)
  • 9.73 mm (2)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.0394 in (3)
  • 0.047 in (3)
  • 0.0472 in (3)
  • 0.0591 in (3)
  • 0.062 in (3)
  • 0.0689 in (3)
  • 0.072 in (3)
  • 0.078 in (3)
  • 0.0787 in (3)
  • 0.079 in (2)
  • 0.0866 in (3)
  • 0.088 in (3)
  • 0.0886 in (1)
  • 0.094 in (3)
  • 0.097 in (3)
  • 0.0984 in (3)
  • 0.105 in (3)
  • 0.108 in (3)
  • 0.1083 in (3)
  • 0.11 in (3)
  • 0.118 in (3)
  • 0.1181 in (5)
  • 0.122 in (3)
  • 0.125 in (5)
  • 0.126 in (5)
  • 0.128 in (3)
  • 0.131 in (2)
  • 0.1378 in (5)
  • 0.142 in (3)
  • 0.156 in (3)
  • 0.157 in (3)
  • 0.1574 in (5)
  • 0.1575 in (5)
  • 0.167 in (5)
  • 0.1673 in (2)
  • 0.169 in (3)
  • 0.1771 in (5)
  • 0.1772 in (5)
  • 0.178 in (3)
  • 0.185 in (4)
  • 0.188 in (5)
  • 0.189 in (5)
  • 0.192 in (2)
  • 0.195 in (3)
  • 0.1969 in (2)
  • 0.197 in (4)
  • 0.202 in (2)
  • 0.213 in (2)
  • 0.2165 in (2)
  • 0.2166 in (1)
  • 0.218 in (2)
  • 0.219 in (2)
  • 0.2362 in (4)
  • 0.25 in (6)
  • 0.255 in (2)
  • 0.276 in (2)
  • 0.281 in (4)
  • 0.312 in (4)
  • 0.315 in (1)
  • 0.344 in (2)
  • 0.354 in (2)
  • 0.375 in (4)
  • 0.38 in (2)
  • 0.383 in (2)
Cutting Width Min