欢迎
请确认您的首选项
更新首选项

Product Suggestions

Product Family suggestions

WIDIA 随时为您服务

有关于产品的问题吗?

查看按专业领域划分的全球服务专业人员的完整列表

快速订购
Item(s) successfully added to cart
查看购物车
回到解决方案

编辑解决方案

添加解决方案

解决方案名称: {{SolutionName}}
Select Filters
Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
工件材料
工件材料
  • P 钢 (11)
    • P0
      低碳钢，长切屑 C < .25%；<125 HB；<530 N/mm^2 UTS
      (11)
    • P1
      低碳钢、短切屑 C < .25%；<125 HB；<530 N/mm^2 UTS
      (11)
    • P2
      中碳钢和高碳钢 C < .25%；<220 HB；<25 HRC；>530 N/mm^2 UTS
      (11)
    • P3
      合金钢和工具钢 C > .25%；<330 HB；<35 HRC；600-850 N/mm^2 UTS
      (11)
    • P4
      合金钢和工具钢 C > .25%；350-420 HB；35-43 HRC；850-1400 N/mm^2 UTS
      (11)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB；<35 HRC；600-900 N/mm^2 UTS
      (11)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB；35-43 HRC；900-2400 N/mm^2 UTS
      (11)
  • M 不锈钢 (11)
    • M1
      奥氏体不锈钢 130-200 HB；<600 N/mm^2 UTS
      (11)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB；<25 HRC; >600 N/mm^2 UTS
      (11)
    • M3
      双相不锈钢 135-275 HB；<30 HRC; 500-1200 N/mm^2 UTS
      (11)
  • K 铸铁 (11)
    • K1
      灰口铸铁 120-290 HB；<32 HRC; 125-500 N/mm^2 UTS
      (11)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB；<28 HRC; <600 N/mm^2 UTS
      (11)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB；<43 HRC; >600 N/mm^2 UTS
      (11)
  • N 非铁金属材料 (11)
    • N1
      铝型材
      (11)
    • N2
      低硅铝合金和镁合金 硅 < 12.2%
      (11)
    • N3
      高硅铝合金 硅 > 12.2%
      (8)
    • N4
      可机加工转位范围为 70 到 100 的铜基、黄铜基、锌基
      (11)
    • N5
      尼龙、塑料、橡胶、酚醛塑料、树脂、玻璃纤维
      (11)
    • N6
      碳、石墨复合材料、CFRP
      (8)
    • N7
      MMC
      (11)
  • S 高温合金 (11)
    • S1
      铁基耐热合金 160-260 HB；25-48 HRC；500-1200 N/mm^2 UTS
      (11)
    • S2
      钴基耐热合金 250-450 HB；25-48 HRC；1000-1450 N/mm^2 UTS
      (11)
    • S3
      镍基耐热合金 160-450 HB；<48 HRC; 600-1700 N/mm^2 UTS
      (11)
    • S4
      钛和钛合金 300-400 HB；33-43 HRC；900-1600 N/mm^2 UTS
      (11)
  • H 淬火材料 (8)
    • H1
      淬火材料 44-48 HRC
      (8)
    • H2
      淬火材料 48-55 HRC
      (8)
    • H3
      淬火材料 56-60 HRC
      (8)
    • H4
      淬火材料 >60 HRC
      (8)
应用
应用
  • Facing Facing (9)
  • ID Facing ID Facing (9)
  • Multiple Direction Cutting Multiple Direction Cutting (7)
  • Plunge Turning Plunge Turning (1)
  • Profiling Profiling (4)
  • TRN Boring TRN Boring (7)
  • Turning Turning (9)
切削条件
切削条件
  • Heavily Interrupted Cut (11)
  • Lightly Interrupted Cut (11)
  • Smooth Cut (11)
  • Varying Depth of Cut (11)
刀具切削刃角度
刀具切削刃角度
  • 90.0 (7)
  • 93.0 (2)
  • 95.0 (2)
刀具切削刃角度 Min to 刀具切削刃角度 Max
连接类型
连接类型
  • KM (7)
每个刀片的切削刃
每个刀片的切削刃
  • 1.0 (9)
  • 2.0 (4)
  • 3.0 (4)
  • 4.0 (2)
每个刀片的切削刃 Min to 每个刀片的切削刃 Max
内部冷却液性能
内部冷却液性能
cornerConfiguration
刀尖半径
刀尖半径
  • 0.002 in (6)
  • 0.004 in (8)
  • 0.008 in (8)
  • 0.016 in (8)
  • 0.031 in (8)
  • 0.047 in (8)
  • 0.315 in (3)
刀尖半径 Min to 刀尖半径 Max
刀尖半径
刀尖半径
  • 0.05 mm (6)
  • 0.1 mm (8)
  • 0.2 mm (8)
  • 0.4 mm (8)
  • 0.8 mm (8)
  • 1.201 mm (8)
  • 8.0 mm (3)
刀尖半径 Min to 刀尖半径 Max
application
最小切削深度
最小切削深度
最小进给
最小进给
切削刀具材质
切削刀具材质
  • HCK10 (2)
  • HK1500 (2)
  • HK35 (2)
  • HT2 (8)
  • HTX (8)
  • HWK15 (2)
  • K10M (8)
  • K10P (6)
  • K10U (6)
  • K15U (6)
  • K20K (6)
  • K25M (2)
  • K25P (2)
  • K313 (11)
  • K68 (8)
  • KB1345 (2)
  • KB1610 (2)
  • KB1625 (6)
  • KB1630 (2)
  • KB5610 (6)
  • KB5625 (6)
  • KB5630 (2)
  • KB9610 (6)
  • KBH10 (2)
  • KBH20 (4)
  • KC5010 (11)
  • KC5020P (2)
  • KC5025 (8)
  • KC5410 (8)
  • KC720 (8)
  • KC730 (11)
  • KC732 (8)
  • KC8050 (11)
  • KC810 (8)
  • KC850 (11)
  • KC9025 (8)
  • KC910 (8)
  • KC9105 (8)
  • KC9110 (8)
  • KC9120 (4)
  • KC9125 (8)
  • KC9225 (8)
  • KC9240 (11)
  • KC9240NEW (11)
  • KC9315 (11)
  • KC9320 (8)
  • KC9325 (6)
  • KC935 (8)
  • KC950 (6)
  • KC990 (4)
  • KCD25 (8)
  • KCK05 (8)
  • KCK05B (6)
  • KCK15 (8)
  • KCK15B (8)
  • KCK20 (11)
  • KCK20B (11)
  • KCM15 (8)
  • KCM15B (4)
  • KCM25 (11)
  • KCM25B (8)
  • KCM35 (8)
  • KCM35B (4)
  • KCP05 (8)
  • KCP05B (2)
  • KCP10 (8)
  • KCP10B (8)
  • KCP15 (2)
  • KCP25 (11)
  • KCP25B (8)
  • KCP25C (11)
  • KCP30 (8)
  • KCP30B (2)
  • KCP40B (2)
  • KCS10 (8)
  • KCS10B (8)
  • KCU10 (11)
  • KCU10B (8)
  • KCU25 (8)
  • KD050 (2)
  • KD081 (2)
  • KD100 (2)
  • KD1400 (6)
  • KD1405 (2)
  • KD1425 (6)
  • KT175 (2)
  • KT315 (8)
  • KT325 (8)
  • KTP10 (6)
  • KU10 (2)
  • KU10T (8)
  • KU30T (8)
  • NL300 (2)
  • NL920 (2)
  • PB100 (4)
  • PB170 (6)
  • PB250 (6)
  • PD100 (2)
  • PD50 (2)
  • SP0PW3 (2)
  • SP4019 (2)
  • THM (8)
  • THM-X (2)
  • TN10P (8)
  • TN10U (8)
  • TN15M (8)
  • TN15U (6)
  • TN2000 (4)
  • TN20K (8)
  • TN20P (8)
  • TN30M (8)
  • TN4000 (2)
  • TN5015 (6)
  • TN5020 (8)
  • TN5105 (6)
  • TN5120 (8)
  • TN6010 (6)
  • TN6025 (4)
  • TN7005 (6)
  • TN7010 (8)
  • TN7015 (8)
  • TN7025 (8)
  • TN7035 (8)
  • TN7105 (8)
  • TN7110 (8)
  • TN7115 (8)
  • TN7125 (8)
  • TN7135 (8)
  • TN8025 (6)
  • TTI15 (2)
  • TTM09 (4)
  • TTR (6)
  • TTX (2)
  • W00342 (2)
  • WBH10C (2)
  • WBH10P (2)
  • WBH10U (2)
  • WBH20P (6)
  • WBH25P (2)
  • WBH25U (6)
  • WBH30P (2)
  • WBK45U (6)
  • WDN25U (6)
  • WK05CT (6)
  • WK15CT (8)
  • WK20CT (8)
  • WM15CT (8)
  • WM25CT (8)
  • WP15CT (8)
  • WP25CT (8)
  • WP35CT (4)
  • WS10PT (6)
  • WS25PT (4)
  • WU05PT (6)
  • WU10HT (8)
  • WU10PT (8)
  • WU25PT (8)
刀具手式
刀具手式
  • L (3)
  • N (1)
  • R (3)
修光刃刀片
修光刃刀片
  • N (11)
  • Y (2)
F 尺寸
F 尺寸
  • 8.0 mm (1)
  • 43.0 mm (6)
F 尺寸 Min to F 尺寸 Max
F 尺寸
F 尺寸
  • 0.315 in (1)
  • 1.693 in (6)
F 尺寸 Min to F 尺寸 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 86.0 mm (4)
最小轴向凹槽直径 Min to 最小轴向凹槽直径 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 3.386 in (4)
最小轴向凹槽直径 Min to 最小轴向凹槽直径 Max
切削方向
切削方向
  • E (1)
  • S (6)
前角样式
前角样式
  • NEUTRAL (ZERO) (7)
最大镗孔深度
最大镗孔深度
  • 2.757 in (4)
最大镗孔深度 Min to 最大镗孔深度 Max
最大镗孔深度
最大镗孔深度
  • 70.0 mm (4)
最大镗孔深度 Min to 最大镗孔深度 Max
frontEnd
刀片形状
刀片形状
  • C-DIAMOND/RHOMBIC 80 (2)
  • R-ROUND (3)
  • T-TRIANGLE 60 (4)
  • V-DIAMOND/RHOMBIC 35 (2)
最大切削深度
最大切削深度
  • 1.299 in (1)
最大切削深度 Min to 最大切削深度 Max
最大切削深度
最大切削深度
  • 33.0 mm (1)
最大切削深度 Min to 最大切削深度 Max
insertGeometry
切削刀具材料
切削刀具材料
  • B H (8)
  • B L (8)
  • D P (8)
  • H T (8)
  • H W (11)
backEnd
连接类型
连接类型
  • TAPER SHANK (7)
系统规格
系统规格
  • KM4X63 (7)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

SVJB 93° SVJB 93°

(2 Products)
  • Shank: KM4X™Shank: KM4X™
  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
  • 冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值
View Products
SAP 材料编号 ISO 目录编号 ANSI 目录编号 [L1] 刀具长度 [L1] 刀具长度 [F] F 尺寸 [F] F 尺寸 Gage 刀片 重量（千克） 重量（磅）
5552433 KM4X63SVJBL16 KM4X63SVJBL16 70.0000 2.756 43.0000 1.693 VB..160408/VB..332 1.18 2.61
    List price:
    $459.61 /each
    Your price::
    5552439 KM4X63SVJBR16 KM4X63SVJBR16 70.0000 2.756 43.0000 1.693 VB..160408/VB..332 1.18 2.62
      List price:
      $459.61 /each
      Your price::
      List price:
      Discount: %
      Your price::
      Replacement This item is no longer available
      Replacement Product Please contact customer service for assistance

      ORIGINAL PRODUCT

      STGC 90° STGC 90°

      (2 Products)
      • Shank: KM4X™Shank: KM4X™
      • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
      • 冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值
      View Products
      SAP 材料编号 ISO 目录编号 ANSI 目录编号 [L1] 刀具长度 [L1] 刀具长度 [F] F 尺寸 [F] F 尺寸 Gage 刀片 重量（千克） 重量（磅）
      5552409 KM4X63STGCL16 KM4X63STGCL16 70.0000 2.756 43.0000 1.693 TC..16T308/TC..3252 1.44 3.17
        List price:
        $459.61 /each
        Your price::
        5552431 KM4X63STGCR16 KM4X63STGCR16 70.0000 2.756 43.0000 1.693 TC..16T308/TC..3252 1.44 3.17
          List price:
          $459.61 /each
          Your price::
          List price:
          Discount: %
          Your price::
          Replacement This item is no longer available
          Replacement Product Please contact customer service for assistance

          ORIGINAL PRODUCT

          STFC 90° STFC 90°

          (2 Products)
          • Shank: KM4X™Shank: KM4X™
          • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
          • 冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值
          View Products
          SAP 材料编号 ISO 目录编号 ANSI 目录编号 [L1] 刀具长度 [L1] 刀具长度 [F] F 尺寸 [F] F 尺寸 [DM] 最小镗孔直径 [DM] 最小镗孔直径 Gage 刀片 重量（千克） 重量（磅）
          5552405 KM4X63STFCL16 KM4X63STFCL16 70.0000 2.756 43.0000 1.693 86.0000 3.386 TC..16T308/TC..3252 1.43 3.15
            List price:
            $459.61 /each
            Your price::
            5552407 KM4X63STFCR16 KM4X63STFCR16 70.0000 2.756 43.0000 1.693 86.0000 3.386 TC..16T308/TC..3252 1.43 3.15
              List price:
              $459.61 /each
              Your price::
              List price:
              Discount: %
              Your price::
              Replacement This item is no longer available
              Replacement Product Please contact customer service for assistance

              ORIGINAL PRODUCT

              SRGC 0° SRGC 0°

              (2 Products)
              • Shank: KM4X™Shank: KM4X™
              • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
              • 冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值
              View Products
              SAP 材料编号 ISO 目录编号 ANSI 目录编号 [L1] 刀具长度 [L1] 刀具长度 [F] F 尺寸 [F] F 尺寸 Gage 刀片 重量（千克） 重量（磅）
              5552443 KM4X63SRGCL16 KM4X63SRGCL16 70.0000 2.756 43.0000 1.693 RC..1605M0 1.40 3.08
                List price:
                $459.61 /each
                Your price::
                5552445 KM4X63SRGCR16 KM4X63SRGCR16 70.0000 2.756 43.0000 1.693 RC..1605M0 1.40 3.08
                  List price:
                  $459.61 /each
                  Your price::
                  List price:
                  Discount: %
                  Your price::
                  Replacement This item is no longer available
                  Replacement Product Please contact customer service for assistance

                  ORIGINAL PRODUCT

                  SCLC 95° SCLC 95°

                  (2 Products)
                  • 冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值
                  • Shank: KM4X™Shank: KM4X™
                  • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                  View Products
                  SAP 材料编号 ISO 目录编号 ANSI 目录编号 [L1] 刀具长度 [L1] 刀具长度 [F] F 尺寸 [F] F 尺寸 [DM] 最小镗孔直径 [DM] 最小镗孔直径 Gage 刀片 重量（千克） 重量（磅）
                  5552435 KM4X63SCLCL12 KM4X63SCLCL12 70.0000 2.756 43.0000 1.693 86.0000 3.386 CC..120408/CC..432 1.40 3.09
                    List price:
                    $459.61 /each
                    Your price::
                    5552437 KM4X63SCLCR12 KM4X63SCLCR12 70.0000 2.756 43.0000 1.693 86.0000 3.386 CC..120408/CC..432 1.40 3.09
                      List price:
                      $459.61 /each
                      Your price::
                      List price:
                      Discount: %
                      Your price::
                      Replacement This item is no longer available
                      Replacement Product Please contact customer service for assistance

                      ORIGINAL PRODUCT

                      SRDC 0° SRDC 0°

                      (1 Products)
                      • Shank: KM4X™Shank: KM4X™
                      • Coolant — Through Coolant 100 bar (1500 psi) MaximumCoolant — Through Coolant 100 bar (1500 psi) Maximum
                      • 冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值冷却方式－ 贯通式冷却 100 bar (1500 psi) 最大值
                      View Products
                      SAP 材料编号 ISO 目录编号 ANSI 目录编号 [L1] 刀具长度 [L1] 刀具长度 [F] F 尺寸 [F] F 尺寸 [CD] 切深 [CD] 切深 Gage 刀片 重量（千克） 重量（磅）
                      5552441 KM4X63SRDCN16 KM4X63SRDCN16 70.0000 2.756 8.0000 .3150 33.0000 1.299 RC..1605M0 1.01 2.23
                        List price:
                        $459.61 /each
                        Your price::
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is no longer available
                        Replacement Product Please contact customer service for assistance
                        product-image
                        Please adjust the following properties from

                        ISO Catalog

                        ANSI Catalog

                        to find similar products.

                        The following CAD files are available

                        Please select a file to download

                        Can’t find the file type you’re looking for?

                        You are about to create a duplicate . Do you want to proceed?
                        You are about to delete Do you want to proceed?
                        What would you like to rename your to?
                        Please enter a valid name
                        Please enter a name for the duplicate
                        Please enter a valid name
                        You are about to add to your My Solutions page. Do you want to proceed?
                        Please enter a valid name
                        Send a copy of

                        Please enter a valid Email
                        Please enter a valid name

                        The following CAD files are available

                        Please select a file to download

                        Can’t find the file type you’re looking for?
                        Request Drawings »

                        You should be logged to see your dashboard information
                        Session expired due to inactivity, please login again
                        The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                        item(s) successfully added to the cart
                        View Cart
                        DOWNLOAD TYPE:



                        . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

                        Minimum quantity should be

                        SAP Material Number ISO Catalog Grade    
                        Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

                        You are about to leave the Solution building process.

                        Are you sure you want to leave?