S-夹持

选择筛选器
Filters
查看以下位置的筛选器
Metric
Inch
keyFilters
工件材料
工件材料
  • P (14)
    • P0
      低碳钢,长切屑 C < .25%;<125 HB;<530 N/mm^2 UTS (14)
    • P1
      低碳钢、短切屑 C < .25%;<125 HB;<530 N/mm^2 UTS (14)
    • P2
      中碳钢和高碳钢 C < .25%;<220 HB;<25 HRC;>530 N/mm^2 UTS (14)
    • P3
      合金钢和工具钢 C > .25%;<330 HB;<35 HRC;600-850 N/mm^2 UTS (14)
    • P4
      合金钢和工具钢 C > .25%;350-420 HB;35-43 HRC;850-1400 N/mm^2 UTS (14)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB;<35 HRC;600-900 N/mm^2 UTS (14)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB;35-43 HRC;900-2400 N/mm^2 UTS (14)
  • M 不锈钢 (14)
    • M1
      奥氏体不锈钢 130-200 HB;<600 N/mm^2 UTS (14)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB;<25 HRC; >600 N/mm^2 UTS (14)
    • M3
      双相不锈钢 135-275 HB;<30 HRC; 500-1200 N/mm^2 UTS (14)
  • K 铸铁 (14)
    • K1
      灰口铸铁 120-290 HB;<32 HRC; 125-500 N/mm^2 UTS (14)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB;<28 HRC; <600 N/mm^2 UTS (14)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB;<43 HRC; >600 N/mm^2 UTS (14)
  • N 非铁金属材料 (14)
    • N1
      铝型材 (14)
    • N2
      低硅铝合金和镁合金 硅 < 12.2% (14)
    • N3
      高硅铝合金 硅 > 12.2% (14)
    • N4
      可机加工转位范围为 70 到 100 的铜基、黄铜基、锌基 (14)
    • N5
      尼龙、塑料、橡胶、酚醛塑料、树脂、玻璃纤维 (14)
    • N6
      碳、石墨复合材料、CFRP (14)
    • N7
      MMC (14)
  • S 高温合金 (14)
    • S1
      铁基耐热合金 160-260 HB;25-48 HRC;500-1200 N/mm^2 UTS (14)
    • S2
      钴基耐热合金 250-450 HB;25-48 HRC;1000-1450 N/mm^2 UTS (14)
    • S3
      镍基耐热合金 160-450 HB;<48 HRC; 600-1700 N/mm^2 UTS (14)
    • S4
      钛和钛合金 300-400 HB;33-43 HRC;900-1600 N/mm^2 UTS (14)
  • H 淬火材料 (14)
    • H1
      淬火材料 44-48 HRC (14)
    • H2
      淬火材料 48-55 HRC (14)
    • H3
      淬火材料 56-60 HRC (14)
    • H4
      淬火材料 >60 HRC (14)
  • C CFRP 材料 (14)
    • C1
      CFRP,CFRP/CFRP (14)
    • C2
      CFRP/铝 CFRP/有色金属 (14)
应用
应用
  • Facing Facing (14)
  • ID Facing ID Facing (14)
  • Multiple Direction Cutting Multiple Direction Cutting (14)
  • Plunge Turning Plunge Turning (8)
  • TRN Boring TRN Boring (14)
  • Turning Turning (14)
切削条件
切削条件
  • Heavily Interrupted Cut (14)
  • Lightly Interrupted Cut (14)
  • Smooth Cut (14)
  • Varying Depth of Cut (14)
刀具切削刃角度
刀具切削刃角度
  • 93.0 (2)
  • 95.0 (6)
  • 107.5 (6)
刀具切削刃角度 Min 刀具切削刃角度 Max
每个刀片的切削刃
每个刀片的切削刃
  • 1.0 (14)
  • 2.0 (14)
  • 4.0 (6)
每个刀片的切削刃 Min 每个刀片的切削刃 Max
总长 [L]
总长 [L]
  • 2.757 in (3)
  • 3.15 in (2)
  • 3.543 in (5)
  • 4.331 in (2)
  • 5.513 in (1)
  • 5.906 in (1)
总长 [L] Min 总长 [L] Max
总长 [L]
总长 [L]
  • 70.0 mm (3)
  • 80.0 mm (2)
  • 90.0 mm (5)
  • 110.0 mm (2)
  • 140.0 mm (1)
  • 150.0 mm (1)
总长 [L] Min 总长 [L] Max
cornerConfiguration
刀尖半径
刀尖半径
  • 0.001 in (1)
  • 0.002 in (14)
  • 0.004 in (14)
  • 0.008 in (14)
  • 0.016 in (14)
  • 0.031 in (14)
  • 0.047 in (13)
  • 0.063 in (6)
刀尖半径 Min 刀尖半径 Max
刀尖半径
刀尖半径
  • 0.025 mm (1)
  • 0.05 mm (14)
  • 0.1 mm (14)
  • 0.2 mm (14)
  • 0.4 mm (14)
  • 0.8 mm (14)
  • 1.201 mm (13)
  • 1.6 mm (6)
刀尖半径 Min 刀尖半径 Max
application
最小切削深度
最小切削深度
最小进给
最小进给
切削刀具材质
切削刀具材质
  • GH1 (1)
  • HCK10 (8)
  • HK1500 (13)
  • HK35 (2)
  • HT2 (14)
  • HTX (14)
  • HWK15 (8)
  • K1010P (1)
  • K10M (8)
  • K10U (14)
  • K15U (14)
  • K20K (1)
  • K25M (6)
  • K25P (7)
  • K313 (14)
  • K420 (1)
  • K68 (14)
  • KB1345 (7)
  • KB1610 (14)
  • KB1625 (7)
  • KB1630 (6)
  • KB5610 (14)
  • KB5625 (14)
  • KB5630 (14)
  • KB9610 (14)
  • KBH10 (14)
  • KBH20 (14)
  • KC5010 (14)
  • KC5020P (8)
  • KC5025 (14)
  • KC5410 (14)
  • KC720 (14)
  • KC730 (14)
  • KC732 (14)
  • KC8050 (14)
  • KC810 (14)
  • KC850 (14)
  • KC9010 (8)
  • KC9025 (14)
  • KC910 (14)
  • KC9105 (14)
  • KC9110 (14)
  • KC9120 (7)
  • KC9125 (14)
  • KC9225 (14)
  • KC9240 (14)
  • KC9240NEW (14)
  • KC9315 (14)
  • KC9320 (14)
  • KC9325 (7)
  • KC935 (14)
  • KC950 (14)
  • KC990 (8)
  • KCD25 (13)
  • KCK05 (14)
  • KCK05B (13)
  • KCK15 (13)
  • KCK15B (14)
  • KCK20 (14)
  • KCK20B (14)
  • KCM15 (14)
  • KCM15B (14)
  • KCM25 (14)
  • KCM25B (14)
  • KCM35 (14)
  • KCM35B (7)
  • KCP05 (14)
  • KCP05B (12)
  • KCP10 (14)
  • KCP10B (14)
  • KCP15 (6)
  • KCP25 (14)
  • KCP25B (14)
  • KCP25C (14)
  • KCP30 (14)
  • KCP30B (6)
  • KCP40B (6)
  • KCS10 (14)
  • KCS10B (14)
  • KCU10 (14)
  • KCU10B (14)
  • KCU25 (14)
  • KCU25B (14)
  • KD050 (13)
  • KD081 (13)
  • KD100 (6)
  • KD1400 (14)
  • KD1405 (6)
  • KD1425 (14)
  • KT125 (1)
  • KT175 (14)
  • KT315 (14)
  • KT325 (14)
  • KTP10 (14)
  • KU10 (14)
  • KU10T (14)
  • KU30T (14)
  • PB100 (1)
  • PB250 (1)
  • PD100 (8)
  • PD50 (2)
  • SPN3W1 (6)
  • THM (14)
  • THM-X (7)
  • TN10P (14)
  • TN10U (14)
  • TN15M (14)
  • TN15U (14)
  • TN2000 (13)
  • TN20K (14)
  • TN20P (14)
  • TN30M (14)
  • TN4000 (12)
  • TN5015 (7)
  • TN5020 (14)
  • TN5105 (7)
  • TN5120 (14)
  • TN6010 (7)
  • TN6025 (7)
  • TN7005 (13)
  • TN7010 (14)
  • TN7015 (14)
  • TN7025 (14)
  • TN7035 (14)
  • TN7105 (14)
  • TN7110 (14)
  • TN7115 (14)
  • TN7125 (14)
  • TN7135 (14)
  • TN8025 (8)
  • TTI15 (13)
  • TTM (6)
  • TTR (7)
  • TTS (6)
  • TTX (14)
  • W00342 (2)
  • WBH10C (13)
  • WBH10P (14)
  • WBH10U (14)
  • WBH20P (8)
  • WBH25P (14)
  • WBH25U (8)
  • WBH30P (14)
  • WBK45U (7)
  • WDN00U (6)
  • WDN25U (14)
  • WK05CT (8)
  • WK15CT (13)
  • WK20CT (14)
  • WM15CT (14)
  • WM25CT (14)
  • WP15CT (14)
  • WP20TT (1)
  • WP25CT (14)
  • WP35CT (14)
  • WS10PT (7)
  • WS25PT (7)
  • WU05PT (8)
  • WU10HT (14)
  • WU10PT (13)
  • WU25PT (14)
刀具手式
刀具手式
  • L (6)
  • R (8)
修光刃刀片
修光刃刀片
  • N (14)
  • Y (7)
F 尺寸
F 尺寸
  • 11.0 mm (3)
  • 13.0 mm (2)
  • 17.0 mm (3)
  • 18.0 mm (2)
  • 22.0 mm (2)
  • 27.0 mm (1)
  • 35.0 mm (1)
F 尺寸 Min F 尺寸 Max
F 尺寸
F 尺寸
  • 0.433 in (3)
  • 0.512 in (2)
  • 0.669 in (3)
  • 0.709 in (2)
  • 0.866 in (2)
  • 1.063 in (1)
  • 1.379 in (1)
F 尺寸 Min F 尺寸 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 20.0 mm (3)
  • 25.0 mm (2)
  • 32.0 mm (3)
  • 33.0 mm (2)
  • 40.0 mm (2)
  • 50.0 mm (1)
  • 63.0 mm (1)
最小轴向凹槽直径 Min 最小轴向凹槽直径 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 0.787 in (3)
  • 0.984 in (2)
  • 1.26 in (3)
  • 1.299 in (2)
  • 1.575 in (2)
  • 1.969 in (1)
  • 2.48 in (1)
最小轴向凹槽直径 Min 最小轴向凹槽直径 Max
切削方向
切削方向
  • B (6)
  • E (8)
最大镗孔深度
最大镗孔深度
  • 1.811 in (3)
  • 2.205 in (2)
  • 2.638 in (5)
  • 3.465 in (2)
  • 4.686 in (1)
  • 5.906 in (1)
最大镗孔深度 Min 最大镗孔深度 Max
最大镗孔深度
最大镗孔深度
  • 46.0 mm (3)
  • 56.0 mm (2)
  • 67.0 mm (5)
  • 88.0 mm (2)
  • 119.0 mm (1)
  • 150.0 mm (1)
最大镗孔深度 Min 最大镗孔深度 Max
frontEnd
刀片形状
刀片形状
  • C-DIAMOND/RHOMBIC 80 (6)
  • D-DIAMOND/RHOMBIC 55 (2)
  • V-DIAMOND/RHOMBIC 35 (6)
insertGeometry
切削刀具材料
切削刀具材料
  • B H (14)
  • B L (14)
  • C N (6)
  • D P (14)
  • H T (14)
  • H W (14)
backEnd
系统规格
系统规格
  • PSC50 (6)
No filters matching ""
您即将把 添加至“我的解决方案”页面. 是否要继续?
product-image
Please adjust the following properties from

ISO Catalog

ANSI Catalog

to find similar products.

The following files are available

Please select a file to download

Models

Product data

应记录以查看仪表盘信息
Session expired due to inactivity, please login again
您尝试添加到购物车的产品 () 不可用,请 联系客户服务部。
件物品已成功添加到购物车
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?