刀柄

选择筛选器
Filters
查看以下位置的筛选器
Metric
Inch
keyFilters
工件材料
工件材料
  • P (66)
    • P0
      低碳钢,长切屑 C < .25%;<125 HB;<530 N/mm^2 UTS (66)
    • P1
      低碳钢、短切屑 C < .25%;<125 HB;<530 N/mm^2 UTS (66)
    • P2
      中碳钢和高碳钢 C < .25%;<220 HB;<25 HRC;>530 N/mm^2 UTS (66)
    • P3
      合金钢和工具钢 C > .25%;<330 HB;<35 HRC;600-850 N/mm^2 UTS (66)
    • P4
      合金钢和工具钢 C > .25%;350-420 HB;35-43 HRC;850-1400 N/mm^2 UTS (66)
    • P5
      铁素体、马氏体和 PH 不锈钢 <330 HB;<35 HRC;600-900 N/mm^2 UTS (66)
    • P6
      高强度铁素体、马氏体和 PH 不锈钢 350-450 HB;35-43 HRC;900-2400 N/mm^2 UTS (66)
  • M 不锈钢 (66)
    • M1
      奥氏体不锈钢 130-200 HB;<600 N/mm^2 UTS (66)
    • M2
      高强度奥氏体不锈钢和铸造不锈钢 150-230 HB;<25 HRC; >600 N/mm^2 UTS (66)
    • M3
      双相不锈钢 135-275 HB;<30 HRC; 500-1200 N/mm^2 UTS (66)
  • K 铸铁 (66)
    • K1
      灰口铸铁 120-290 HB;<32 HRC; 125-500 N/mm^2 UTS (66)
    • K2
      中低强度 CGI 和球墨铸铁 130-260 HB;<28 HRC; <600 N/mm^2 UTS (66)
    • K3
      高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB;<43 HRC; >600 N/mm^2 UTS (66)
  • N 非铁金属材料 (66)
    • N1
      铝型材 (66)
    • N2
      低硅铝合金和镁合金 硅 < 12.2% (66)
    • N3
      高硅铝合金 硅 > 12.2% (66)
    • N4
      可机加工转位范围为 70 到 100 的铜基、黄铜基、锌基 (51)
    • N5
      尼龙、塑料、橡胶、酚醛塑料、树脂、玻璃纤维 (66)
    • N6
      碳、石墨复合材料、CFRP (66)
    • N7
      MMC (51)
  • S 高温合金 (66)
    • S1
      铁基耐热合金 160-260 HB;25-48 HRC;500-1200 N/mm^2 UTS (66)
    • S2
      钴基耐热合金 250-450 HB;25-48 HRC;1000-1450 N/mm^2 UTS (66)
    • S3
      镍基耐热合金 160-450 HB;<48 HRC; 600-1700 N/mm^2 UTS (66)
    • S4
      钛和钛合金 300-400 HB;33-43 HRC;900-1600 N/mm^2 UTS (66)
  • H 淬火材料 (21)
    • H1
      淬火材料 44-48 HRC (21)
    • H2
      淬火材料 48-55 HRC (21)
Select All Star
  • DE (3)
  • IN (1)
  • US (22)
应用
应用
  • Face Grooving Face Grooving (67)
  • Grooving Grooving (67)
  • OD Thread Turning OD Thread Turning (67)
  • Threading Threading (67)
螺纹类型
螺纹类型
  • 60 (64)
  • ACME (43)
  • API RD (28)
  • BSW (15)
  • BUTTRESS (13)
  • STUB ACME (28)
  • UN (58)
  • UNJ (15)
切削条件
切削条件
  • Heavily Interrupted Cut (64)
  • Lightly Interrupted Cut (64)
  • Smooth Cut (64)
  • Varying Depth of Cut (64)
连接类型
连接类型
  • Toolholder (47)
每个刀片的切削刃
每个刀片的切削刃
  • 1.0 (64)
  • 2.0 (66)
每个刀片的切削刃 Min 每个刀片的切削刃 Max
内部冷却液性能
内部冷却液性能
总长 [L]
总长 [L]
  • 2.5 in (1)
  • 3.15 in (1)
  • 3.5 in (1)
  • 3.938 in (1)
  • 4.0 in (2)
  • 4.5 in (9)
  • 4.921 in (7)
  • 5.0 in (9)
  • 5.906 in (13)
  • 6.0 in (21)
  • 6.694 in (2)
总长 [L] Min 总长 [L] Max
总长 [L]
总长 [L]
  • 63.5 mm (1)
  • 80.0 mm (1)
  • 88.9 mm (1)
  • 100.0 mm (1)
  • 101.601 mm (2)
  • 114.301 mm (9)
  • 125.0 mm (7)
  • 127.0 mm (9)
  • 150.0 mm (13)
  • 152.4 mm (21)
  • 170.0 mm (2)
总长 [L] Min 总长 [L] Max
cornerConfiguration
刀尖半径
刀尖半径
  • 0.003 in (43)
  • 0.004 in (36)
  • 0.006 in (7)
  • 0.007 in (56)
  • 0.008 in (64)
  • 0.01 in (30)
  • 0.012 in (15)
  • 0.014 in (41)
  • 0.016 in (28)
  • 0.02 in (23)
  • 0.023 in (41)
  • 0.03 in (23)
  • 0.031 in (51)
  • 0.039 in (51)
  • 0.047 in (51)
  • 0.049 in (51)
  • 0.06 in (51)
  • 0.062 in (28)
  • 0.063 in (41)
  • 0.069 in (51)
  • 0.078 in (28)
  • 0.079 in (41)
  • 0.089 in (41)
  • 0.095 in (41)
  • 0.098 in (13)
  • 0.125 in (13)
刀尖半径 Min 刀尖半径 Max
刀尖半径
刀尖半径
  • 0.076 mm (43)
  • 0.1 mm (36)
  • 0.151 mm (7)
  • 0.176 mm (56)
  • 0.2 mm (64)
  • 0.225 mm (15)
  • 0.25 mm (30)
  • 0.301 mm (15)
  • 0.325 mm (41)
  • 0.351 mm (28)
  • 0.4 mm (28)
  • 0.5 mm (23)
  • 0.576 mm (41)
  • 0.75 mm (23)
  • 0.775 mm (51)
  • 1.0 mm (51)
  • 1.201 mm (51)
  • 1.25 mm (51)
  • 1.5 mm (51)
  • 1.576 mm (28)
  • 1.6 mm (41)
  • 1.75 mm (51)
  • 1.975 mm (28)
  • 2.0 mm (41)
  • 2.25 mm (41)
  • 2.401 mm (41)
  • 2.5 mm (13)
  • 3.176 mm (13)
刀尖半径 Min 刀尖半径 Max
application
切削刀具材质
切削刀具材质
  • THM (51)
  • TN10P (42)
  • TN6010 (64)
  • TN6025 (66)
  • TN7110 (64)
  • WU10HT (15)
  • WU10PT (21)
  • WU25PT (13)
刀具手式
刀具手式
  • L (16)
  • R (31)
修光刃刀片
修光刃刀片
  • N (66)
F 尺寸
F 尺寸
  • 12.0 mm (1)
  • 12.701 mm (3)
  • 14.275 mm (1)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 19.05 mm (1)
  • 20.0 mm (1)
  • 25.0 mm (3)
  • 25.401 mm (6)
  • 31.75 mm (13)
  • 32.0 mm (7)
  • 38.1 mm (4)
  • 40.0 mm (2)
F 尺寸 Min F 尺寸 Max
F 尺寸
F 尺寸
  • 0.473 in (1)
  • 0.5 in (3)
  • 0.562 in (1)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.75 in (1)
  • 0.787 in (1)
  • 0.984 in (3)
  • 1.0 in (6)
  • 1.25 in (13)
  • 1.26 in (7)
  • 1.5 in (4)
  • 1.575 in (2)
F 尺寸 Min F 尺寸 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 0.0 mm (46)
  • 41.301 mm (23)
  • 47.6 mm (23)
  • 55.875 mm (1)
  • 57.2 mm (10)
  • 60.325 mm (1)
  • 63.5 mm (4)
  • 76.2 mm (1)
  • 88.9 mm (24)
  • 139.701 mm (23)
  • 174.601 mm (23)
  • 209.601 mm (10)
  • 222.3 mm (10)
最小轴向凹槽直径 Min 最小轴向凹槽直径 Max
最小轴向凹槽直径
最小轴向凹槽直径
  • 0.0 in (46)
  • 1.627 in (23)
  • 1.874 in (23)
  • 2.2 in (1)
  • 2.253 in (10)
  • 2.375 in (1)
  • 2.5 in (4)
  • 3.0 in (1)
  • 3.5 in (24)
  • 5.5 in (23)
  • 6.875 in (23)
  • 8.252 in (10)
  • 8.752 in (10)
最小轴向凹槽直径 Min 最小轴向凹槽直径 Max
最大轴向凹槽直径
最大轴向凹槽直径
  • 393.661 in (64)
最大轴向凹槽直径 Min 最大轴向凹槽直径 Max
最大轴向凹槽直径
最大轴向凹槽直径
  • 9999.0 mm (64)
最大轴向凹槽直径 Min 最大轴向凹槽直径 Max
切削方向
切削方向
  • E (47)
前角样式
前角样式
  • NEUTRAL (ZERO) (47)
最大镗孔深度
最大镗孔深度
  • 1.0 in (7)
  • 2.0 in (13)
最大镗孔深度 Min 最大镗孔深度 Max
最大镗孔深度
最大镗孔深度
  • 25.401 mm (7)
  • 50.801 mm (13)
最大镗孔深度 Min 最大镗孔深度 Max
frontEnd
切削宽度
切削宽度
  • 0.02 in (23)
  • 0.031 in (23)
  • 0.039 in (51)
  • 0.041 in (15)
  • 0.047 in (51)
  • 0.055 in (23)
  • 0.058 in (23)
  • 0.06 in (51)
  • 0.062 in (51)
  • 0.067 in (23)
  • 0.069 in (51)
  • 0.073 in (28)
  • 0.077 in (23)
  • 0.078 in (28)
  • 0.079 in (51)
  • 0.088 in (51)
  • 0.089 in (36)
  • 0.094 in (15)
  • 0.095 in (51)
  • 0.098 in (51)
  • 0.108 in (51)
  • 0.119 in (64)
  • 0.125 in (64)
  • 0.126 in (28)
  • 0.128 in (51)
  • 0.138 in (64)
  • 0.147 in (15)
  • 0.152 in (23)
  • 0.156 in (28)
  • 0.157 in (41)
  • 0.167 in (28)
  • 0.177 in (41)
  • 0.188 in (35)
  • 0.189 in (41)
  • 0.192 in (15)
  • 0.195 in (28)
  • 0.197 in (13)
  • 0.217 in (13)
  • 0.237 in (13)
  • 0.25 in (13)
切削宽度 Min 切削宽度 Max
切削宽度
切削宽度
  • 0.5 mm (23)
  • 0.775 mm (23)
  • 0.8 mm (23)
  • 1.0 mm (51)
  • 1.05 mm (15)
  • 1.201 mm (51)
  • 1.401 mm (23)
  • 1.475 mm (23)
  • 1.5 mm (51)
  • 1.576 mm (51)
  • 1.701 mm (23)
  • 1.75 mm (51)
  • 1.826 mm (28)
  • 1.951 mm (23)
  • 1.975 mm (28)
  • 2.0 mm (51)
  • 2.2 mm (51)
  • 2.225 mm (15)
  • 2.25 mm (36)
  • 2.375 mm (15)
  • 2.401 mm (51)
  • 2.5 mm (51)
  • 2.75 mm (51)
  • 3.0 mm (64)
  • 3.176 mm (64)
  • 3.2 mm (28)
  • 3.25 mm (51)
  • 3.5 mm (64)
  • 3.725 mm (15)
  • 3.85 mm (23)
  • 3.95 mm (28)
  • 3.975 mm (15)
  • 4.0 mm (41)
  • 4.25 mm (28)
  • 4.5 mm (41)
  • 4.775 mm (35)
  • 4.801 mm (41)
  • 4.875 mm (15)
  • 4.95 mm (28)
  • 5.0 mm (13)
  • 5.5 mm (13)
  • 6.0 mm (13)
  • 6.351 mm (13)
切削宽度 Min 切削宽度 Max
刀片尺寸
刀片尺寸
  • 1 (1)
  • 2 (25)
  • 3 (30)
  • 4 (10)
  • 6 (1)
最大切削深度
最大切削深度
  • 0.138 in (23)
  • 0.21 in (28)
  • 0.225 in (1)
  • 0.294 in (13)
  • 0.334 in (2)
最大切削深度 Min 最大切削深度 Max
最大切削深度
最大切削深度
  • 3.5 mm (23)
  • 5.325 mm (28)
  • 5.726 mm (1)
  • 7.476 mm (13)
  • 8.475 mm (2)
最大切削深度 Min 最大切削深度 Max
insertGeometry
切削刀具材料
切削刀具材料
  • H W (66)
backEnd
连接类型
连接类型
  • SQUARE SHANK (47)
刀柄高度
刀柄高度
  • 0.375 in (1)
  • 0.473 in (2)
  • 0.5 in (4)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.75 in (6)
  • 0.787 in (4)
  • 0.984 in (6)
  • 1.0 in (12)
  • 1.25 in (5)
  • 1.26 in (2)
刀柄高度 Min 刀柄高度 Max
刀柄高度
刀柄高度
  • 9.525 mm (1)
  • 12.0 mm (2)
  • 12.701 mm (4)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 19.05 mm (6)
  • 20.0 mm (4)
  • 25.0 mm (6)
  • 25.401 mm (12)
  • 31.75 mm (5)
  • 32.0 mm (2)
刀柄高度 Min 刀柄高度 Max
刀柄宽度
刀柄宽度
  • 0.375 in (1)
  • 0.473 in (2)
  • 0.5 in (4)
  • 0.625 in (3)
  • 0.63 in (2)
  • 0.75 in (6)
  • 0.787 in (4)
  • 0.984 in (6)
  • 1.0 in (13)
  • 1.25 in (4)
  • 1.26 in (2)
刀柄宽度 Min 刀柄宽度 Max
刀柄宽度
刀柄宽度
  • 9.525 mm (1)
  • 12.0 mm (2)
  • 12.701 mm (4)
  • 15.875 mm (3)
  • 16.0 mm (2)
  • 19.05 mm (6)
  • 20.0 mm (4)
  • 25.0 mm (6)
  • 25.401 mm (13)
  • 31.75 mm (4)
  • 32.0 mm (2)
刀柄宽度 Min 刀柄宽度 Max
No filters matching ""
您即将把 添加至“我的解决方案”页面. 是否要继续?
product-image
Please adjust the following properties from

ISO Catalog

ANSI Catalog

to find similar products.

The following files are available

Please select a file to download

Models

Product data

应记录以查看仪表盘信息
Session expired due to inactivity, please login again
您尝试添加到购物车的产品 () 不可用,请 联系客户服务部。
件物品已成功添加到购物车
View Cart

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO Catalog Grade    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?