C-Style Clamping • For Ceramic Inserts
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (3)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(3)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(3)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(3)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(3)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(3)
- M Stainless Steel (2)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(2)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(2)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(2)
- K Cast Iron (5)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(5)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(5)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(4)
- N Non-Ferrous Materials (3)
- N1Wrought Aluminum (3)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(3)
- N3High-Silicon Aluminum Alloys Si >12.2%(2)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (3)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2)
- N6Carbon, Graphite Composites, CFRP (2)
- N7MMC's (2)
- S High-Temp Alloys (4)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3)
- H Hardened Materials (4)
- H1Hardened Materials 44-48 HRC(4)
- H2Hardened Materials 48-55 HRC(4)
- H3Hardened Materials 56-60 HRC(4)
- H4Hardened Materials >60 HRC(4)
Applications
Applications
Facing (1)
Multiple Direction Cutting (5)
Profiling (5)
TRN Boring (4)
Turning (1)
Cutting Condition
Cutting Condition
- Lightly Interrupted Cut (3)
- Smooth Cut (3)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (3)
- 95.0 (2)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (2)
- 3.0 (3)
- 4.0 (2)
to
Over All Length [L]
Over All Length [L]
- 7.875 in(2)
- 9.9 in(1)
- 11.811 in(1)
- 14.0 in(1)
to
Over All Length [L]
Over All Length [L]
- 200.0 mm(2)
- 251.451 mm(1)
- 300.0 mm(1)
- 355.6 mm(1)
to
Corner Radius
Corner Radius
- 0.016 in(4)
- 0.031 in(4)
- 0.047 in(4)
- 0.063 in(1)
to
Corner Radius
Corner Radius
- 0.4 mm(4)
- 0.8 mm(4)
- 1.201 mm(4)
- 1.6 mm(1)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CG55 (2)
- CW2015 (4)
- CW3020 (1)
- CW5025 (1)
- THM (3)
- THM-F (2)
- THM-X (3)
- TN2000 (2)
- TN4000 (2)
- TTM08 (2)
- TTMS (2)
- TTR (2)
- TTR-X (2)
- TTS (3)
- WDN25U (2)
- WK20CT (3)
- WP15CT (3)
- WP25CT (2)
- WP35CT (3)
F Dimension
F Dimension
- 11.0 mm(1)
- 17.0 mm(1)
- 19.425 mm(1)
- 22.0 mm(1)
- 27.0 mm(1)
to
F Dimension
F Dimension
- 0.433 in(1)
- 0.669 in(1)
- 0.765 in(1)
- 0.866 in(1)
- 1.063 in(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 20.0 mm(1)
- 32.0 mm(1)
- 37.35 mm(1)
- 40.0 mm(1)
- 55.0 mm(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.787 in(1)
- 1.26 in(1)
- 1.47 in(1)
- 1.575 in(1)
- 2.165 in(1)
to
Cutting Direction
Cutting Direction
- B (2)
- E (3)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (2)
- POSITIVE-NEGATIVE (3)
Maximum Bore Depth
Maximum Bore Depth
- 2.52 in(1)
- 3.938 in(1)
- 5.0 in(1)
- 5.039 in(1)
- 6.299 in(1)
to
Maximum Bore Depth
Maximum Bore Depth
- 64.0 mm(1)
- 100.0 mm(1)
- 127.0 mm(1)
- 128.0 mm(1)
- 160.0 mm(1)
to
Front-End
Clamp Style
Clamp Style
- C (4)
- N (1)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (2)
- T-TRIANGLE 60 (3)
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- C A (4)
- C N (1)
- D P (2)
- H W (3)
Back-End
Back-End Diameter
Back-End Diameter
- 16.0 mm(1)
- 25.0 mm(1)
- 31.75 mm(1)
- 32.0 mm(1)
- 40.0 mm(1)
to
Back-End Diameter
Back-End Diameter
- 0.63 in(1)
- 0.984 in(1)
- 1.25 in(1)
- 1.26 in(1)
- 1.575 in(1)
to
No filters matching ""
