Small Hole Boring Bars For Turning
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (205)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(205)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(205)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(205)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(205)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(205)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(205)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(205)
- M Stainless Steel (205)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(205)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(205)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(205)
- K Cast Iron (205)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(205)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(205)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(205)
- N Non-Ferrous Materials (205)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(205)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (110)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (110)
- N1Wrought Aluminum (205)
- N7MMC's (77)
- N3High-Silicon Aluminum Alloys Si >12.2%(188)
- N6Carbon, Graphite Composites, CFRP (110)
- S High-Temp Alloys (4)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4)
- H Hardened Materials (36)
- H2Hardened Materials 48-55 HRC(36)
- H1Hardened Materials 44-48 HRC(36)
- H3Hardened Materials 56-60 HRC(36)
- H4Hardened Materials >60 HRC(36)
Select All Star
- IN (1)
- US (46)
Applications
Applications
Multiple Direction Cutting (167)
Profiling (37)
TRN Boring (179)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (2)
- 60.0 (3)
- 90.0 (44)
- 93.0 (19)
- 95.0 (138)
- 97.0 (8)
to
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (110)
- 2.0 (85)
- 3.0 (122)
- 4.0 (6)
to
Over All Length [L]
Over All Length [L]
- 2.375 in(2)
- 2.5 in(24)
- 2.75 in(12)
- 2.756 in(2)
- 2.757 in(1)
- 3.0 in(15)
- 3.125 in(1)
- 3.375 in(4)
- 3.5 in(6)
- 3.75 in(9)
- 3.95 in(3)
- 3.96 in(2)
- 3.997 in(2)
- 4.0 in(36)
- 4.25 in(5)
- 4.5 in(2)
- 4.75 in(2)
- 4.997 in(1)
- 5.0 in(9)
- 5.9843 in(1)
- 5.99 in(2)
- 6.0 in(45)
- 7.0 in(4)
- 8.0 in(9)
- 10.0 in(9)
- 12.0 in(2)
to
Over All Length [L]
Over All Length [L]
- 60.32 mm(2)
- 63.5 mm(24)
- 69.85 mm(11)
- 69.86 mm(1)
- 70.0 mm(3)
- 72.2 mm(1)
- 76.2 mm(14)
- 79.37 mm(1)
- 85.72 mm(3)
- 85.73 mm(1)
- 88.9 mm(6)
- 95.25 mm(9)
- 100.33 mm(3)
- 100.58 mm(2)
- 101.51 mm(2)
- 101.59 mm(1)
- 101.6 mm(35)
- 107.95 mm(5)
- 114.3 mm(2)
- 120.65 mm(2)
- 126.91 mm(1)
- 127.0 mm(9)
- 152.0 mm(1)
- 152.15 mm(2)
- 152.4 mm(44)
- 154.2 mm(1)
- 177.8 mm(4)
- 203.2 mm(9)
- 254.0 mm(9)
- 304.8 mm(1)
- 304.81 mm(1)
to
Corner Radius
Corner Radius
- 0.002 in(77)
- 0.004 in(15)
- 0.005 in(2)
- 0.007 in(183)
- 0.008 in(18)
- 0.015 in(183)
- 0.016 in(80)
- 0.031 in(110)
to
Corner Radius
Corner Radius
- 0.05 mm(77)
- 0.1 mm(15)
- 0.125 mm(2)
- 0.175 mm(183)
- 0.2 mm(18)
- 0.375 mm(183)
- 0.4 mm(80)
- 0.775 mm(70)
- 0.8 mm(65)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- C25 (147)
- C3 (33)
- CBN6 (33)
- CG5 (203)
- CG55 (11)
- CG6 (183)
- CM1 (193)
- TN7 (180)
- WBH10U (3)
- WBH30P (3)
- WDN10U (33)
- WDN25U (77)
- WK20CT (150)
- WM25CT (4)
- WP15CT (3)
- WP25CT (7)
Hand Of Tool
Hand Of Tool
- L (45)
- R (169)
Wiper Insert
Wiper Insert
- N (207)
F Dimension
F Dimension
- 0.61 mm(1)
- 1.4 mm(1)
- 1.78 mm(3)
- 2.41 mm(8)
- 2.64 mm(17)
- 2.82 mm(4)
- 2.95 mm(8)
- 2.97 mm(2)
- 3.02 mm(5)
- 3.1 mm(5)
- 3.12 mm(1)
- 3.18 mm(2)
- 3.2 mm(10)
- 3.4 mm(2)
- 3.43 mm(1)
- 3.61 mm(1)
- 3.63 mm(1)
- 3.68 mm(14)
- 3.7 mm(1)
- 3.71 mm(2)
- 3.73 mm(3)
- 3.734 mm(1)
- 3.86 mm(4)
- 3.96 mm(15)
- 4.42 mm(3)
- 4.7 mm(6)
- 4.75 mm(15)
- 4.8 mm(1)
- 5.36 mm(3)
- 5.54 mm(2)
- 5.61 mm(9)
- 5.66 mm(1)
- 5.79 mm(5)
- 5.99 mm(1)
- 6.55 mm(1)
- 6.81 mm(1)
- 6.93 mm(3)
- 7.07 mm(2)
- 7.11 mm(1)
- 7.29 mm(1)
- 7.52 mm(10)
- 8.13 mm(2)
- 8.61 mm(3)
- 8.64 mm(1)
- 8.71 mm(1)
- 8.76 mm(2)
- 8.89 mm(1)
- 8.97 mm(4)
- 9.65 mm(3)
- 9.98 mm(7)
- 10.34 mm(2)
- 11.68 mm(7)
- 14.86 mm(4)
to
F Dimension
F Dimension
- 0.024 in(1)
- 0.055 in(1)
- 0.07 in(3)
- 0.095 in(8)
- 0.104 in(17)
- 0.111 in(4)
- 0.116 in(8)
- 0.117 in(2)
- 0.119 in(5)
- 0.122 in(5)
- 0.123 in(1)
- 0.125 in(2)
- 0.126 in(10)
- 0.134 in(2)
- 0.135 in(1)
- 0.142 in(1)
- 0.143 in(1)
- 0.145 in(14)
- 0.146 in(3)
- 0.147 in(4)
- 0.152 in(4)
- 0.156 in(15)
- 0.174 in(3)
- 0.185 in(6)
- 0.187 in(15)
- 0.189 in(1)
- 0.211 in(3)
- 0.218 in(2)
- 0.221 in(9)
- 0.223 in(1)
- 0.228 in(5)
- 0.236 in(1)
- 0.258 in(1)
- 0.268 in(1)
- 0.272 in(1)
- 0.273 in(2)
- 0.278 in(2)
- 0.28 in(1)
- 0.287 in(1)
- 0.296 in(10)
- 0.32 in(2)
- 0.339 in(3)
- 0.34 in(1)
- 0.343 in(1)
- 0.345 in(2)
- 0.35 in(1)
- 0.353 in(4)
- 0.38 in(3)
- 0.393 in(7)
- 0.407 in(2)
- 0.46 in(7)
- 0.585 in(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 4.57 mm(8)
- 5.18 mm(7)
- 5.182 mm(1)
- 5.28 mm(9)
- 5.54 mm(4)
- 5.69 mm(2)
- 5.78 mm(1)
- 5.79 mm(6)
- 5.791 mm(1)
- 5.94 mm(11)
- 6.2 mm(1)
- 6.6 mm(2)
- 6.78 mm(1)
- 6.98 mm(10)
- 7.06 mm(3)
- 7.08 mm(2)
- 7.09 mm(2)
- 7.24 mm(16)
- 7.42 mm(4)
- 7.52 mm(15)
- 8.81 mm(3)
- 9.04 mm(6)
- 9.09 mm(15)
- 9.16 mm(1)
- 9.98 mm(1)
- 10.01 mm(1)
- 10.34 mm(1)
- 10.49 mm(1)
- 10.5 mm(2)
- 10.67 mm(1)
- 10.68 mm(1)
- 11.13 mm(13)
- 11.15 mm(1)
- 12.22 mm(2)
- 12.5 mm(1)
- 12.9 mm(1)
- 13.16 mm(1)
- 13.34 mm(2)
- 13.67 mm(3)
- 13.84 mm(1)
- 14.3 mm(10)
- 15.37 mm(1)
- 15.39 mm(1)
- 16.38 mm(3)
- 16.967 mm(1)
- 16.97 mm(2)
- 17.02 mm(1)
- 17.09 mm(2)
- 17.25 mm(1)
- 17.27 mm(3)
- 17.48 mm(1)
- 18.29 mm(7)
- 19.05 mm(1)
- 20.24 mm(2)
- 21.59 mm(7)
- 24.61 mm(3)
- 27.94 mm(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.18 in(8)
- 0.204 in(8)
- 0.208 in(9)
- 0.218 in(4)
- 0.224 in(2)
- 0.228 in(8)
- 0.234 in(11)
- 0.244 in(1)
- 0.26 in(2)
- 0.267 in(1)
- 0.275 in(11)
- 0.278 in(3)
- 0.279 in(3)
- 0.2791 in(1)
- 0.285 in(16)
- 0.292 in(4)
- 0.296 in(15)
- 0.347 in(3)
- 0.356 in(6)
- 0.358 in(15)
- 0.36 in(1)
- 0.394 in(1)
- 0.407 in(1)
- 0.413 in(3)
- 0.42 in(2)
- 0.438 in(13)
- 0.439 in(1)
- 0.481 in(2)
- 0.492 in(1)
- 0.508 in(1)
- 0.518 in(1)
- 0.525 in(2)
- 0.538 in(3)
- 0.545 in(1)
- 0.563 in(10)
- 0.605 in(1)
- 0.606 in(1)
- 0.645 in(3)
- 0.668 in(3)
- 0.67 in(1)
- 0.673 in(2)
- 0.679 in(1)
- 0.68 in(3)
- 0.688 in(1)
- 0.72 in(7)
- 0.75 in(1)
- 0.797 in(2)
- 0.85 in(7)
- 0.969 in(3)
- 1.1 in(4)
to
Cutting Direction
Cutting Direction
- B (145)
- E (59)
- P (7)
- S (3)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (19)
- NEUTRAL (ZERO) (26)
- POSITIVE-ZERO (169)
Maximum Bore Depth
Maximum Bore Depth
- 0.484 in(1)
- 0.5 in(10)
- 0.628 in(2)
- 0.75 in(13)
- 0.788 in(3)
- 0.875 in(5)
- 0.936 in(3)
- 0.942 in(1)
- 0.9432 in(1)
- 0.944 in(2)
- 1.0 in(20)
- 1.012 in(1)
- 1.122 in(2)
- 1.125 in(15)
- 1.182 in(2)
- 1.25 in(18)
- 1.26 in(1)
- 1.416 in(5)
- 1.5 in(31)
- 1.5748 in(1)
- 1.872 in(7)
- 1.875 in(7)
- 1.888 in(1)
- 1.89 in(3)
- 2.0 in(10)
- 2.25 in(8)
- 2.5 in(11)
- 2.832 in(1)
- 3.0 in(14)
- 3.75 in(6)
- 3.78 in(1)
- 4.0 in(1)
- 4.5 in(4)
- 6.0 in(3)
to
Maximum Bore Depth
Maximum Bore Depth
- 12.3 mm(1)
- 12.7 mm(10)
- 16.0 mm(2)
- 19.048 mm(7)
- 19.05 mm(6)
- 20.0 mm(3)
- 22.22 mm(3)
- 22.225 mm(1)
- 22.23 mm(1)
- 23.76 mm(3)
- 24.0 mm(4)
- 25.4 mm(20)
- 25.72 mm(1)
- 28.56 mm(4)
- 28.572 mm(9)
- 28.578 mm(1)
- 28.58 mm(3)
- 30.0 mm(2)
- 31.748 mm(5)
- 31.75 mm(12)
- 31.76 mm(1)
- 32.0 mm(1)
- 36.0 mm(5)
- 38.04 mm(4)
- 38.08 mm(4)
- 38.1 mm(20)
- 38.12 mm(3)
- 40.0 mm(1)
- 47.55 mm(1)
- 47.58 mm(6)
- 47.61 mm(1)
- 47.62 mm(2)
- 47.622 mm(4)
- 48.0 mm(4)
- 50.8 mm(10)
- 57.12 mm(6)
- 57.15 mm(2)
- 63.48 mm(3)
- 63.5 mm(4)
- 63.52 mm(4)
- 72.0 mm(1)
- 76.2 mm(14)
- 95.22 mm(6)
- 96.0 mm(1)
- 101.6 mm(1)
- 114.24 mm(3)
- 114.3 mm(1)
- 152.4 mm(3)
to
Boring Bar Material
Boring Bar Material
- C (99)
- S (106)
Front-End
Clamp Style
Clamp Style
- S (185)
Cutting Width
Cutting Width
- 0.03 in(2)
- 0.06 in(2)
to
Cutting Width
Cutting Width
- 0.762 mm(2)
- 1.524 mm(2)
to
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (86)
- T-TRIANGLE 60 (105)
- THREADING (3)
- W-TRIGON 80 (19)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.062 in(1)
- 0.075 in(1)
- 0.102 in(1)
- 0.125 in(5)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 1.57 mm(1)
- 1.91 mm(1)
- 2.59 mm(1)
- 3.17 mm(1)
- 3.18 mm(4)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (3)
- B L (33)
- D P (110)
- H T (180)
- H W (205)
Back-End
Back-End Diameter
Back-End Diameter
- 3.96 mm(3)
- 4.0 mm(3)
- 4.76 mm(4)
- 4.762 mm(18)
- 4.763 mm(1)
- 5.0 mm(5)
- 6.0 mm(8)
- 6.34 mm(4)
- 6.35 mm(13)
- 7.925 mm(1)
- 7.93 mm(6)
- 7.937 mm(9)
- 8.0 mm(4)
- 9.52 mm(13)
- 9.524 mm(1)
- 9.525 mm(7)
- 9.53 mm(3)
- 10.0 mm(3)
- 12.0 mm(3)
- 12.7 mm(52)
- 15.87 mm(26)
- 15.875 mm(1)
- 15.88 mm(5)
- 16.0 mm(2)
- 19.04 mm(3)
- 19.05 mm(9)
- 25.4 mm(7)
to
No filters matching ""
