P-Style Clamping • For Negative Style Inserts
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (102)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(102)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(102)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(102)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(102)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(102)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(102)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(102)
- M Stainless Steel (101)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(101)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(101)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(101)
- K Cast Iron (102)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(102)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(102)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(102)
- N Non-Ferrous Materials (96)
- N1Wrought Aluminum (96)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(96)
- N3High-Silicon Aluminum Alloys Si >12.2%(27)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (96)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (27)
- N6Carbon, Graphite Composites, CFRP (27)
- N7MMC's (27)
- S High-Temp Alloys (101)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(101)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(101)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(101)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(96)
- H Hardened Materials (65)
- H1Hardened Materials 44-48 HRC(65)
- H2Hardened Materials 48-55 HRC(65)
- H3Hardened Materials 56-60 HRC(65)
- H4Hardened Materials >60 HRC(65)
Select All Star
- IN (2)
Applications
Applications
Facing (86)
Multiple Direction Cutting (62)
Profiling (55)
Turning (102)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (102)
- Lightly Interrupted Cut (102)
- Smooth Cut (102)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (19)
- 63.0 (2)
- 75.0 (30)
- 90.0 (10)
- 93.0 (14)
- 95.0 (27)
komu
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (38)
- 2.0 (31)
- 3.0 (16)
- 4.0 (76)
- 6.0 (20)
- 8.0 (66)
komu
Over All Length [L]
Over All Length [L]
- 100.0 mm(6)
- 125.0 mm(20)
- 150.0 mm(31)
- 170.0 mm(28)
- 200.0 mm(2)
- 250.0 mm(12)
- 300.0 mm(3)
komu
Corner Radius
Corner Radius
- 0.1 mm(16)
- 0.2 mm(26)
- 0.4 mm(63)
- 0.6 mm(6)
- 0.8 mm(97)
- 1.2 mm(96)
- 1.6 mm(92)
- 2.4 mm(22)
komu
application
Minimum Depth of Cut
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (59)
- CW5025 (50)
- PB100 (16)
- THM (51)
- THM-X (44)
- THMF-X (33)
- TN10P (66)
- TN10U (38)
- TN15M (41)
- TN15U (33)
- TN2000 (72)
- TN20K (71)
- TN20P (85)
- TN30M (49)
- TN30P (76)
- TN4000 (77)
- TN6010 (27)
- TTR (5)
- TTR-X (11)
- TTS (43)
- WBH10P (16)
- WBH10U (16)
- WBH20P (50)
- WBH30P (16)
- WBK40U (12)
- WDN00U (16)
- WDN25U (27)
- WK05CT (94)
- WK15CT (59)
- WK20CT (97)
- WM15CT (89)
- WM25CT (101)
- WM35CT (96)
- WP05CT (22)
- WP15CT (102)
- WP25CT (102)
- WP35CT (92)
- WS10PT (89)
- WS25PT (96)
- WU10HT (85)
- WU10PT (59)
- WU25PT (59)
Hand Of Tool
Hand Of Tool
- L (45)
- N (4)
- R (53)
Wiper Insert
Wiper Insert
- N (102)
- Y (32)
F Dimension
F Dimension
- 10.0 mm(1)
- 12.5 mm(3)
- 16.0 mm(1)
- 17.0 mm(3)
- 20.0 mm(7)
- 22.0 mm(6)
- 25.0 mm(16)
- 27.0 mm(3)
- 32.0 mm(33)
- 35.0 mm(4)
- 40.0 mm(15)
- 43.0 mm(1)
- 50.0 mm(9)
komu
Cutting Direction
Cutting Direction
- B (27)
- E (14)
- S (61)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (83)
- NEGATIVE-ZERO (19)
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (32)
- D-DIAMOND/RHOMBIC 55 (16)
- S-SQUARE 90 (34)
- T-TRIANGLE 60 (10)
- W-TRIGON 80 (10)
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (28)
- B L (50)
- C A (59)
- C N (66)
- D P (27)
- H W (102)
backEnd
Shank Height
Shank Height
- 16.0 mm(6)
- 20.0 mm(20)
- 25.0 mm(31)
- 32.0 mm(28)
- 40.0 mm(16)
- 50.0 mm(1)
komu
Shank Width
Shank Width
- 16.0 mm(6)
- 20.0 mm(20)
- 25.0 mm(42)
- 32.0 mm(19)
- 40.0 mm(14)
- 50.0 mm(1)
komu
No filters matching ""
