D-Style Clamping • For Negative Style Inserts

Vybrat filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (148)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (148)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (148)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (148)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (148)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (148)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (148)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (148)
  • M Stainless Steel (142)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (142)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (142)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (142)
  • K Cast Iron (148)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (148)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (148)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (148)
  • N Non-Ferrous Materials (139)
    • N1
      Wrought Aluminum (139)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (139)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (66)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (139)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (66)
    • N6
      Carbon, Graphite Composites, CFRP (66)
    • N7
      MMC's (66)
  • S High-Temp Alloys (142)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (142)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (142)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (142)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (139)
  • H Hardened Materials (119)
    • H1
      Hardened Materials 44-48 HRC (119)
    • H2
      Hardened Materials 48-55 HRC (119)
    • H3
      Hardened Materials 56-60 HRC (119)
    • H4
      Hardened Materials >60 HRC (119)
Select All Star
  • DE (23)
  • IN (6)
  • SG (3)
  • US (8)
Applications
Applications
  • Chamfer Turning Chamfer Turning (4)
  • Facing Facing (116)
  • Multiple Direction Cutting Multiple Direction Cutting (128)
  • Profiling Profiling (113)
  • Turning Turning (145)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (148)
  • Lightly Interrupted Cut (148)
  • Smooth Cut (148)
  • Varying Depth of Cut (148)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 45.0 (15)
  • 62.5 (1)
  • 63.0 (4)
  • 72.5 (4)
  • 75.0 (20)
  • 90.0 (9)
  • 93.0 (37)
  • 95.0 (50)
  • 107.5 (3)
  • 117.5 (5)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (78)
  • 2.0 (82)
  • 3.0 (15)
  • 4.0 (124)
  • 6.0 (21)
  • 8.0 (70)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 4.5 in (7)
  • 4.921 in (21)
  • 5.0 in (4)
  • 5.906 in (32)
  • 6.0 in (54)
  • 6.694 in (25)
  • 6.732 in (1)
  • 9.843 in (4)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 114.301 mm (7)
  • 125.0 mm (21)
  • 127.0 mm (4)
  • 150.0 mm (32)
  • 152.4 mm (54)
  • 170.0 mm (25)
  • 171.0 mm (1)
  • 250.0 mm (4)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (53)
  • 0.008 in (64)
  • 0.014 in (12)
  • 0.016 in (112)
  • 0.024 in (9)
  • 0.031 in (141)
  • 0.047 in (141)
  • 0.063 in (103)
  • 0.094 in (1)
  • 0.095 in (31)
  • 0.25 in (3)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (53)
  • 0.2 mm (64)
  • 0.351 mm (12)
  • 0.4 mm (112)
  • 0.601 mm (9)
  • 0.8 mm (141)
  • 1.201 mm (141)
  • 1.6 mm (103)
  • 2.375 mm (1)
  • 2.401 mm (31)
  • 6.351 mm (3)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CW2015 (110)
  • CW5025 (116)
  • HK1500 (79)
  • PB100 (24)
  • PB170 (24)
  • PB250 (24)
  • PB300 (24)
  • SP0A00 (13)
  • SPN4W2 (4)
  • THM (56)
  • THM-X (49)
  • THMF-X (41)
  • TN10P (130)
  • TN10U (97)
  • TN15M (127)
  • TN15U (97)
  • TN2000 (83)
  • TN20K (131)
  • TN20P (142)
  • TN30M (134)
  • TN30P (104)
  • TN4000 (83)
  • TN5015 (104)
  • TN5020 (97)
  • TN5105 (79)
  • TN5120 (105)
  • TN6010 (65)
  • TN6025 (62)
  • TN7005 (62)
  • TN7010 (110)
  • TN7015 (112)
  • TN7025 (112)
  • TN7035 (93)
  • TN7105 (62)
  • TN7110 (101)
  • TN7115 (107)
  • TN7125 (102)
  • TN7135 (93)
  • TN8025 (113)
  • TTI15 (43)
  • TTM (2)
  • TTM09 (23)
  • TTR (39)
  • TTR-X (4)
  • TTS (66)
  • TTX (42)
  • W00342 (4)
  • WBH10C (87)
  • WBH10P (53)
  • WBH10U (79)
  • WBH20P (91)
  • WBH25P (70)
  • WBH25U (61)
  • WBH30P (53)
  • WBK40U (44)
  • WBK45U (48)
  • WDN00U (32)
  • WDN25U (66)
  • WK05CT (138)
  • WK15CT (71)
  • WK20CT (138)
  • WM15CT (135)
  • WM25CT (136)
  • WM35CT (135)
  • WP05CT (33)
  • WP15CT (146)
  • WP20TT (7)
  • WP25CT (146)
  • WP35CT (146)
  • WS10PT (136)
  • WS25PT (139)
  • WU10HT (135)
  • WU10PT (96)
  • WU25PT (96)
Hand Of Tool
Hand Of Tool
  • L (61)
  • N (13)
  • R (74)
Wiper Insert
Wiper Insert
  • N (148)
  • Y (48)
F Dimension
F Dimension
  • 9.5 mm (1)
  • 9.525 mm (1)
  • 10.0 mm (3)
  • 12.0 mm (4)
  • 12.601 mm (1)
  • 12.625 mm (1)
  • 12.701 mm (1)
  • 13.0 mm (3)
  • 15.5 mm (1)
  • 15.875 mm (1)
  • 19.5 mm (1)
  • 23.151 mm (2)
  • 25.0 mm (16)
  • 25.401 mm (8)
  • 27.0 mm (4)
  • 28.651 mm (1)
  • 31.75 mm (29)
  • 32.0 mm (32)
  • 33.551 mm (1)
  • 35.0 mm (3)
  • 38.1 mm (12)
  • 40.0 mm (13)
  • 47.026 mm (1)
  • 50.0 mm (3)
  • 50.801 mm (5)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.374 in (1)
  • 0.375 in (1)
  • 0.394 in (3)
  • 0.473 in (4)
  • 0.496 in (1)
  • 0.497 in (1)
  • 0.5 in (1)
  • 0.512 in (3)
  • 0.61 in (1)
  • 0.625 in (1)
  • 0.768 in (1)
  • 0.911 in (2)
  • 0.984 in (16)
  • 1.0 in (8)
  • 1.063 in (4)
  • 1.129 in (1)
  • 1.25 in (29)
  • 1.26 in (32)
  • 1.321 in (1)
  • 1.379 in (3)
  • 1.5 in (12)
  • 1.575 in (13)
  • 1.851 in (1)
  • 1.969 in (3)
  • 2.0 in (5)
F Dimension Min komu F Dimension Max
Cutting Direction
Cutting Direction
  • B (50)
  • E (16)
  • S (82)
Rake Angle Style
Rake Angle Style
  • DOUBLE NEGATIVE (126)
  • NEGATIVE-ZERO (22)
frontEnd
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (49)
  • D-DIAMOND/RHOMBIC 55 (29)
  • R-ROUND (3)
  • S-SQUARE 90 (21)
  • T-TRIANGLE 60 (6)
  • V-DIAMOND/RHOMBIC 35 (25)
  • W-TRIGON 80 (15)
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (98)
  • B L (91)
  • C A (110)
  • C N (128)
  • D P (66)
  • H T (43)
  • H W (148)
backEnd
Shank Height
Shank Height
  • 0.75 in (9)
  • 0.787 in (21)
  • 0.984 in (31)
  • 0.985 in (1)
  • 1.0 in (31)
  • 1.25 in (19)
  • 1.26 in (26)
  • 1.5 in (6)
  • 1.575 in (4)
Shank Height Min komu Shank Height Max
Shank Height
Shank Height
  • 19.05 mm (9)
  • 20.0 mm (21)
  • 25.0 mm (31)
  • 25.026 mm (1)
  • 25.401 mm (31)
  • 31.75 mm (19)
  • 32.0 mm (26)
  • 38.1 mm (6)
  • 40.0 mm (4)
Shank Height Min komu Shank Height Max
Shank Width
Shank Width
  • 0.75 in (9)
  • 0.787 in (21)
  • 0.984 in (42)
  • 1.0 in (35)
  • 1.25 in (15)
  • 1.26 in (16)
  • 1.5 in (6)
  • 1.575 in (4)
Shank Width Min komu Shank Width Max
Shank Width
Shank Width
  • 19.05 mm (9)
  • 20.0 mm (21)
  • 25.0 mm (42)
  • 25.401 mm (35)
  • 31.75 mm (15)
  • 32.0 mm (16)
  • 38.1 mm (6)
  • 40.0 mm (4)
Shank Width Min komu Shank Width Max
No filters matching ""
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?