Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

S-Style Clamping • For Positive Style Inserts

Vybrat filtry
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (131)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (131)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (131)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (131)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (131)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (131)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (131)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (131)
  • M Stainless Steel (131)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (131)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (131)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (131)
  • K Cast Iron (131)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (131)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (131)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (131)
  • N Non-Ferrous Materials (137)
    • N1
      Wrought Aluminum (137)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (137)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (131)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100 (137)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (131)
    • N6
      Carbon, Graphite Composites, CFRP (131)
    • N7
      MMC's (131)
  • S High-Temp Alloys (131)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (131)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (131)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (131)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (100)
  • H Hardened Materials (120)
    • H1
      Hardened Materials 44-48 HRC (120)
    • H2
      Hardened Materials 48-55 HRC (120)
    • H3
      Hardened Materials 56-60 HRC (120)
    • H4
      Hardened Materials >60 HRC (120)
Select All Star
  • DE (29)
  • GB (3)
  • SG (1)
  • US (6)
Applications
Applications
  • Back Boring Back Boring (12)
  • Facing Facing (4)
  • ID Facing ID Facing (1)
  • Multiple Direction Cutting Multiple Direction Cutting (120)
  • Profiling Profiling (57)
  • TRN Boring TRN Boring (113)
  • Turning Turning (4)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (127)
  • Lightly Interrupted Cut (131)
  • Smooth Cut (131)
  • Varying Depth of Cut (131)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 0.0 (1)
  • -3.0 (1)
  • 90.0 (35)
  • 93.0 (33)
  • 95.0 (58)
  • 107.5 (14)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (124)
  • 2.0 (117)
  • 3.0 (23)
  • 4.0 (65)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 4.331 in (5)
  • 4.852 in (1)
  • 4.892 in (1)
  • 4.921 in (15)
  • 5.876 in (1)
  • 5.906 in (6)
  • 5.955 in (2)
  • 6.0 in (8)
  • 7.087 in (8)
  • 7.875 in (19)
  • 8.0 in (11)
  • 9.843 in (16)
  • 9.9 in (1)
  • 10.0 in (19)
  • 11.811 in (20)
  • 12.0 in (6)
  • 13.781 in (1)
  • 14.0 in (2)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 110.0 mm (5)
  • 123.25 mm (1)
  • 124.25 mm (1)
  • 125.0 mm (15)
  • 149.25 mm (1)
  • 150.0 mm (6)
  • 151.25 mm (2)
  • 152.4 mm (8)
  • 180.0 mm (8)
  • 200.0 mm (19)
  • 203.201 mm (11)
  • 250.0 mm (16)
  • 251.451 mm (1)
  • 254.0 mm (19)
  • 300.0 mm (20)
  • 304.8 mm (6)
  • 350.0 mm (1)
  • 355.6 mm (2)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.004 in (62)
  • 0.008 in (132)
  • 0.016 in (140)
  • 0.031 in (137)
  • 0.047 in (56)
  • 0.063 in (2)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.1 mm (62)
  • 0.2 mm (132)
  • 0.4 mm (140)
  • 0.8 mm (137)
  • 1.201 mm (56)
  • 1.6 mm (2)
Corner Radius Min komu Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • CG5 (16)
  • CG6 (7)
  • CM1 (16)
  • HCK10 (69)
  • HK1500 (59)
  • HK35 (59)
  • HWK10 (9)
  • HWK15 (69)
  • K420 (18)
  • PB100 (56)
  • PB170 (41)
  • PB250 (63)
  • PB300 (32)
  • PD100 (69)
  • PD50 (57)
  • SP0G00 (9)
  • SP0PW3 (7)
  • SPN3W1 (12)
  • THM (96)
  • THM-X (60)
  • TN1000 (23)
  • TN10P (96)
  • TN10U (96)
  • TN15M (94)
  • TN15U (87)
  • TN2000 (66)
  • TN20K (96)
  • TN20P (96)
  • TN30M (94)
  • TN4000 (41)
  • TN5015 (77)
  • TN5020 (87)
  • TN5105 (77)
  • TN5120 (96)
  • TN6010 (45)
  • TN6025 (38)
  • TN7005 (46)
  • TN7010 (87)
  • TN7015 (96)
  • TN7025 (87)
  • TN7035 (87)
  • TN7105 (94)
  • TN7110 (96)
  • TN7115 (96)
  • TN7125 (96)
  • TN7135 (96)
  • TN8025 (81)
  • TTI15 (64)
  • TTM (12)
  • TTM09 (17)
  • TTR (80)
  • TTS (35)
  • TTX (53)
  • W00160 (1)
  • W00162 (15)
  • W00342 (40)
  • WBH10C (63)
  • WBH10P (98)
  • WBH10U (107)
  • WBH20P (65)
  • WBH25P (111)
  • WBH25U (43)
  • WBH30P (79)
  • WBK45U (52)
  • WDN00U (60)
  • WDN25U (124)
  • WK05CT (90)
  • WK15CT (81)
  • WK20CT (129)
  • WM15CT (128)
  • WM25CT (131)
  • WP15CT (131)
  • WP20TT (46)
  • WP25CT (137)
  • WP35CT (62)
  • WS10PT (64)
  • WS25PT (57)
  • WU05PT (84)
  • WU10HT (90)
  • WU10PT (81)
  • WU20HT (19)
  • WU25PT (90)
  • YY4200 (4)
Hand Of Tool
Hand Of Tool
  • L (47)
  • R (95)
Wiper Insert
Wiper Insert
  • N (140)
  • Y (65)
F Dimension
F Dimension
  • 4.5 mm (3)
  • 5.0 mm (2)
  • 5.875 mm (2)
  • 6.0 mm (7)
  • 6.351 mm (6)
  • 6.875 mm (1)
  • 7.0 mm (13)
  • 7.926 mm (9)
  • 9.0 mm (12)
  • 9.525 mm (1)
  • 10.3 mm (5)
  • 11.0 mm (19)
  • 11.101 mm (2)
  • 12.701 mm (9)
  • 12.875 mm (1)
  • 13.0 mm (16)
  • 14.275 mm (5)
  • 16.25 mm (3)
  • 17.0 mm (16)
  • 19.05 mm (3)
  • 19.425 mm (1)
  • 22.0 mm (5)
  • 22.6 mm (1)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.177 in (3)
  • 0.197 in (2)
  • 0.231 in (2)
  • 0.237 in (7)
  • 0.25 in (6)
  • 0.271 in (1)
  • 0.276 in (13)
  • 0.312 in (9)
  • 0.354 in (12)
  • 0.375 in (1)
  • 0.406 in (5)
  • 0.433 in (19)
  • 0.437 in (2)
  • 0.5 in (9)
  • 0.507 in (1)
  • 0.512 in (16)
  • 0.562 in (5)
  • 0.64 in (3)
  • 0.669 in (16)
  • 0.75 in (3)
  • 0.765 in (1)
  • 0.866 in (5)
  • 0.89 in (1)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 8.0 mm (3)
  • 10.0 mm (2)
  • 11.0 mm (8)
  • 12.201 mm (7)
  • 13.0 mm (14)
  • 15.25 mm (10)
  • 16.0 mm (12)
  • 18.55 mm (2)
  • 19.55 mm (5)
  • 20.0 mm (19)
  • 23.625 mm (9)
  • 24.901 mm (5)
  • 25.0 mm (17)
  • 30.475 mm (3)
  • 32.0 mm (16)
  • 33.025 mm (3)
  • 37.35 mm (1)
  • 40.0 mm (5)
  • 44.7 mm (1)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.315 in (3)
  • 0.394 in (2)
  • 0.433 in (8)
  • 0.48 in (7)
  • 0.512 in (14)
  • 0.6 in (10)
  • 0.63 in (12)
  • 0.73 in (2)
  • 0.77 in (5)
  • 0.787 in (19)
  • 0.93 in (9)
  • 0.98 in (5)
  • 0.984 in (17)
  • 1.2 in (3)
  • 1.26 in (16)
  • 1.3 in (3)
  • 1.47 in (1)
  • 1.575 in (5)
  • 1.76 in (1)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • B (57)
  • E (84)
  • P (1)
Rake Angle Style
Rake Angle Style
  • NEGATIVE-ZERO (135)
  • NEUTRAL (ZERO) (7)
Maximum Bore Depth
Maximum Bore Depth
  • 1.26 in (2)
  • 1.417 in (3)
  • 1.499 in (4)
  • 1.5 in (3)
  • 1.575 in (9)
  • 1.875 in (1)
  • 1.891 in (12)
  • 2.0 in (7)
  • 2.25 in (1)
  • 2.362 in (5)
  • 2.499 in (1)
  • 2.5 in (3)
  • 2.52 in (10)
  • 2.835 in (8)
  • 3.0 in (16)
  • 3.008 in (1)
  • 3.15 in (7)
  • 3.75 in (1)
  • 3.781 in (9)
  • 3.938 in (10)
  • 4.0 in (5)
  • 4.5 in (1)
  • 4.724 in (10)
  • 5.0 in (1)
  • 5.039 in (4)
  • 5.906 in (6)
  • 6.0 in (1)
  • 7.559 in (1)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 32.0 mm (2)
  • 36.0 mm (3)
  • 38.075 mm (4)
  • 38.1 mm (3)
  • 40.0 mm (9)
  • 47.625 mm (1)
  • 48.0 mm (12)
  • 50.801 mm (7)
  • 57.151 mm (1)
  • 60.0 mm (5)
  • 63.475 mm (1)
  • 63.5 mm (3)
  • 64.0 mm (10)
  • 72.0 mm (8)
  • 76.2 mm (16)
  • 76.4 mm (1)
  • 80.0 mm (7)
  • 95.25 mm (1)
  • 96.0 mm (9)
  • 100.0 mm (10)
  • 101.601 mm (5)
  • 114.301 mm (1)
  • 120.0 mm (10)
  • 127.0 mm (1)
  • 128.0 mm (4)
  • 150.0 mm (6)
  • 152.4 mm (1)
  • 192.0 mm (1)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (58)
  • S (84)
frontEnd
Clamp Style
Clamp Style
  • S (141)
Insert Shape
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (70)
  • D-DIAMOND/RHOMBIC 55 (39)
  • T-TRIANGLE 60 (23)
  • V-DIAMOND/RHOMBIC 35 (10)
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.11 in (1)
  • 0.183 in (1)
  • 0.187 in (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 2.801 mm (1)
  • 4.65 mm (1)
  • 4.75 mm (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • B H (124)
  • B L (128)
  • C N (31)
  • D P (131)
  • H T (64)
  • H W (140)
backEnd
Back-End Diameter
Back-End Diameter
  • 6.0 mm (3)
  • 7.95 mm (1)
  • 8.0 mm (10)
  • 9.525 mm (8)
  • 10.0 mm (14)
  • 12.0 mm (12)
  • 12.701 mm (11)
  • 15.875 mm (5)
  • 16.0 mm (19)
  • 19.05 mm (13)
  • 19.1 mm (1)
  • 20.0 mm (17)
  • 25.0 mm (16)
  • 25.401 mm (5)
  • 31.75 mm (1)
  • 32.0 mm (5)
  • 38.1 mm (1)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.237 in (3)
  • 0.313 in (1)
  • 0.315 in (10)
  • 0.375 in (8)
  • 0.394 in (14)
  • 0.473 in (12)
  • 0.5 in (11)
  • 0.625 in (5)
  • 0.63 in (19)
  • 0.75 in (13)
  • 0.752 in (1)
  • 0.787 in (17)
  • 0.984 in (16)
  • 1.0 in (5)
  • 1.25 in (1)
  • 1.26 in (5)
  • 1.5 in (1)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""

A-SCLP -5°

(12) A-SCLP -5°

E-SCLP -5°

(10) E-SCLP -5°

E-STFC 90°

(10) E-STFC 90°

E-SCFC 90°

(2) E-SCFC 90°

E-SCLC 95°

(17) E-SCLC 95°

A-SCLC -5°

(8) A-SCLC -5°

A-SVUB 93°

(3) A-SVUB 93°

A-SVQB 107,5°

(3) A-SVQB 107,5°

A-SDUC -3°

(14) A-SDUC -3°

A-SCLC 95°

(12) A-SCLC 95°

A-SDQC 107,5°

(5) A-SDQC 107,5°

A-SCFP 0°

(4) A-SCFP 0°

A-SDUP -3°

(4) A-SDUP -3°

A-SDXP -5°

(1) A-SDXP -5°

A-STFP -0°

(7) A-STFP -0°

E-SCFP 90°

(3) E-SCFP 90°
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

 

Can’t find the file type you’re looking for?

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku
Zobrazit košík

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Děkujeme za úspěšnou registraci. Nyní máte okamžitý přístup k přihlášení a můžete stránky používat.

You are about to leave the Solution building process.

Are you sure you want to leave?