Inserts

Vybrat filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (29)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (29)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (29)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (29)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (29)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (29)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (29)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (29)
  • M Stainless Steel (29)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (29)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (29)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (29)
  • K Cast Iron (29)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (29)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (29)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (29)
  • N Non-Ferrous Materials (29)
    • N1
      Wrought Aluminum (29)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (29)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (9)
Applications
Applications
  • ID Grooving ID Grooving (3)
  • ID Thread Turning ID Thread Turning (2)
  • Multiple Direction Cutting Multiple Direction Cutting (6)
  • TRN Boring TRN Boring (18)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (2)
  • 92.0 (14)
  • 92.5 (3)
  • 93.0 (10)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Internal Coolant Capability
Internal Coolant Capability
application
F Dimension
F Dimension
  • 0.65 mm (5)
  • 1.05 mm (4)
  • 1.075 mm (1)
  • 1.175 mm (1)
  • 1.451 mm (5)
  • 1.55 mm (1)
  • 1.85 mm (3)
  • 1.925 mm (3)
  • 2.225 mm (3)
  • 3.051 mm (2)
  • 3.825 mm (1)
F Dimension Min komu F Dimension Max
F Dimension
F Dimension
  • 0.027 in (5)
  • 0.041 in (4)
  • 0.042 in (1)
  • 0.046 in (1)
  • 0.057 in (5)
  • 0.061 in (1)
  • 0.073 in (3)
  • 0.076 in (3)
  • 0.088 in (3)
  • 0.12 in (2)
  • 0.151 in (1)
F Dimension Min komu F Dimension Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 1.576 mm (5)
  • 2.401 mm (5)
  • 2.801 mm (1)
  • 3.176 mm (5)
  • 3.551 mm (1)
  • 3.95 mm (3)
  • 4.45 mm (3)
  • 4.75 mm (3)
  • 6.351 mm (2)
  • 7.926 mm (1)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
  • 0.062 in (5)
  • 0.095 in (5)
  • 0.11 in (1)
  • 0.125 in (5)
  • 0.14 in (1)
  • 0.156 in (3)
  • 0.176 in (3)
  • 0.187 in (3)
  • 0.25 in (2)
  • 0.312 in (1)
Minimum Axial Groove Diameter Min komu Minimum Axial Groove Diameter Max
Cutting Direction
Cutting Direction
  • E (18)
  • S (11)
Maximum Bore Depth
Maximum Bore Depth
  • 0.187 in (1)
  • 0.213 in (2)
  • 0.281 in (3)
  • 0.312 in (3)
  • 0.375 in (4)
  • 0.5 in (7)
  • 0.6 in (1)
  • 0.625 in (2)
  • 0.75 in (1)
  • 0.826 in (1)
  • 0.875 in (1)
  • 1.0 in (1)
  • 1.25 in (1)
  • 2.125 in (1)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Maximum Bore Depth
Maximum Bore Depth
  • 4.75 mm (1)
  • 5.4 mm (2)
  • 7.125 mm (3)
  • 7.926 mm (3)
  • 9.525 mm (4)
  • 12.701 mm (7)
  • 15.25 mm (1)
  • 15.875 mm (2)
  • 19.05 mm (1)
  • 20.951 mm (1)
  • 22.225 mm (1)
  • 25.401 mm (1)
  • 31.75 mm (1)
  • 53.975 mm (1)
Maximum Bore Depth Min komu Maximum Bore Depth Max
Boring Bar Material
Boring Bar Material
  • C (12)
frontEnd
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.017 in (1)
  • 0.028 in (1)
  • 0.03 in (1)
  • 0.033 in (2)
  • 0.035 in (1)
  • 0.04 in (1)
  • 0.05 in (2)
  • 0.062 in (1)
  • 0.078 in (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
Maximum Cutting Depth
Maximum Cutting Depth
  • 0.426 mm (1)
  • 0.701 mm (1)
  • 0.75 mm (1)
  • 0.826 mm (2)
  • 0.9 mm (1)
  • 1.026 mm (1)
  • 1.276 mm (2)
  • 1.576 mm (1)
  • 1.975 mm (1)
Maximum Cutting Depth Min komu Maximum Cutting Depth Max
backEnd
Back-End Diameter
Back-End Diameter
  • 3.95 mm (23)
  • 7.926 mm (6)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.156 in (23)
  • 0.312 in (6)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?