successfully added to cart
View Cart
M-Clamping
M-Clamping
M-Clamping
M-Clamping

MCLN 95° • KM63TS™

M-Clamping

Uses and application

  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum

Workpiece Materials

P Steel
M Stainless Steel
K Cast Iron
N Non-Ferrous
S High-Temp Alloys
H Hardened Materials
Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (16)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (16)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (16)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (16)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (16)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (16)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (16)
  • M Stainless Steel (16)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (16)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (16)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (16)
  • K Cast Iron (16)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (16)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (16)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (16)
  • N Non-Ferrous Materials (16)
    • N1
      Wrought Aluminum
      (16)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (16)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (16)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (16)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (16)
    • N6
      Carbon, Graphite Composites, CFRP
      (16)
    • N7
      MMC's
      (16)
  • S High-Temp Alloys (16)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (16)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (16)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (16)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (16)
  • H Hardened Materials (16)
    • H1
      Hardened Materials 44-48 HRC
      (16)
    • H2
      Hardened Materials 48-55 HRC
      (16)
    • H3
      Hardened Materials 56-60 HRC
      (16)
    • H4
      Hardened Materials >60 HRC
      (16)
Applications
  • Back Boring Back Boring (13)
  • Facing Facing (16)
  • Multiple Direction Cutting Multiple Direction Cutting (16)
  • Profiling Profiling (13)
  • TRN Boring TRN Boring (13)
  • Turning Turning (16)
Cutting Condition
  • Heavily Interrupted Cut (16)
  • Interrupted (16)
  • Lightly Interrupted Cut (16)
  • Smooth Cut (16)
  • Varying Depth of Cut (16)
Tool Cutting Edge Angle
  • 95.0 (16)
to
Connection Style
  • KM (16)
Cutting Edges Per Insert
  • 1.0 (16)
  • 2.0 (16)
  • 4.0 (16)
  • 8.0 (16)
to
cornerConfiguration
Corner Radius
  • 0.1 (16)
  • 0.102 (16)
  • 0.2 (16)
  • 0.203 (16)
  • 0.397 (16)
  • 0.4 (16)
  • 0.792 (16)
  • 0.794 (16)
  • 0.8 (16)
  • 1.19 (16)
  • 1.191 (16)
  • 1.2 (16)
  • 1.587 (16)
  • 1.588 (16)
  • 1.6 (16)
to
Corner Radius
  • 0.004 (16)
  • 0.008 (16)
  • 0.0083 (16)
  • 0.0156 (16)
  • 0.016 (16)
  • 0.031 (16)
  • 0.0312 (16)
  • 0.0313 (16)
  • 0.0315 (16)
  • 0.0469 (16)
  • 0.047 (16)
  • 0.0472 (16)
  • 0.0625 (16)
  • 0.063 (16)
  • 0.1563 (16)
to
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
  • 13E (16)
  • 241 (16)
  • CL4 (16)
  • CM2 (16)
  • CM3 (16)
  • CM4 (16)
  • CPX (16)
  • CW2 (16)
  • CW2015 (16)
  • CW5025 (16)
  • GX (16)
  • HK1500 (16)
  • HT2 (16)
  • HTX (16)
  • K060 (16)
  • K090 (16)
  • K1 (16)
  • K10M (16)
  • K10P (16)
  • K10U (16)
  • K15U (16)
  • K20K (16)
  • K21 (16)
  • K25M (16)
  • K25P (16)
  • K313 (16)
  • K420 (16)
  • K45 (16)
  • K68 (16)
  • KB1340 (16)
  • KB1345 (16)
  • KB1610 (16)
  • KB1625 (16)
  • KB1630 (16)
  • KB5610 (16)
  • KB5625 (16)
  • KB5630 (16)
  • KB9610 (16)
  • KB9640 (16)
  • KBH10 (16)
  • KBH10B (16)
  • KBH20 (16)
  • KBH20B (16)
  • KBK35 (16)
  • KC210 (16)
  • KC250 (16)
  • KC5010 (16)
  • KC5025 (16)
  • KC5410 (16)
  • KC5510 (16)
  • KC5525 (16)
  • KC710 (16)
  • KC720 (16)
  • KC722 (16)
  • KC730 (16)
  • KC7310 (16)
  • KC732 (16)
  • KC8050 (16)
  • KC810 (16)
  • KC850 (16)
  • KC9010 (16)
  • KC9025 (16)
  • KC910 (16)
  • KC9105 (16)
  • KC9110 (16)
  • KC9120 (16)
  • KC9125 (16)
  • KC9140 (16)
  • KC9145 (16)
  • KC9215 (16)
  • KC9225 (16)
  • KC9240 (16)
  • KC9240NEW (16)
  • KC9245 (16)
  • KC9315 (16)
  • KC9320 (16)
  • KC9325 (16)
  • KC935 (16)
  • KC950 (16)
  • KC990 (16)
  • KCK05 (16)
  • KCK05B (16)
  • KCK15 (16)
  • KCK15B (16)
  • KCK20 (16)
  • KCK20B (16)
  • KCM15 (16)
  • KCM15B (16)
  • KCM25 (16)
  • KCM25B (16)
  • KCM35 (16)
  • KCM35B (16)
  • KCP05 (16)
  • KCP05B (16)
  • KCP10 (16)
  • KCP10B (16)
  • KCP25 (16)
  • KCP25B (16)
  • KCP30 (16)
  • KCP30B (16)
  • KCP40 (16)
  • KCP40B (16)
  • KCPK05 (16)
  • KCS10 (16)
  • KCS10B (16)
  • KCU10 (16)
  • KCU25 (16)
  • KD050 (16)
  • KD081 (16)
  • KD100 (16)
  • KD120 (16)
  • KD1400 (16)
  • KD1405 (16)
  • KD1425 (16)
  • KM1 (16)
  • KMF (16)
  • KT1120 (16)
  • KT125 (16)
  • KT150 (16)
  • KT175 (16)
  • KT315 (16)
  • KT325 (16)
  • KU10T (16)
  • KU30T (16)
  • KY1310 (16)
  • KY1320 (16)
  • KY1540 (16)
  • KY1615 (16)
  • KY2000 (16)
  • KY2100 (16)
  • KY3000 (16)
  • KY3400 (16)
  • KY3500 (16)
  • KY4000 (16)
  • KY4300 (16)
  • KY4400 (16)
  • KYHK15B (16)
  • KYK10 (16)
  • KYK25 (16)
  • KYK35 (16)
  • KYS25 (16)
  • KYS30 (16)
  • NL200 (16)
  • NL250 (16)
  • NL300 (16)
  • NL400 (16)
  • NL920 (16)
  • P25 (16)
  • PB100 (16)
  • PB170 (16)
  • PB250 (16)
  • PB300 (16)
  • PS5 (16)
  • SP0819 (16)
  • SP3019 (16)
  • SP4019 (16)
  • THM (16)
  • THM-X (16)
  • THMF-X (16)
  • TN10P (16)
  • TN10U (16)
  • TN15M (16)
  • TN15U (16)
  • TN2000 (16)
  • TN20K (16)
  • TN20P (16)
  • TN30M (16)
  • TN30P (16)
  • TN4000 (16)
  • TN5015 (16)
  • TN5020 (16)
  • TN5105 (16)
  • TN5120 (16)
  • TN6010 (16)
  • TN6025 (16)
  • TN7005 (16)
  • TN7010 (16)
  • TN7015 (16)
  • TN7025 (16)
  • TN7035 (16)
  • TN7105 (16)
  • TN7110 (16)
  • TN7115 (16)
  • TN7125 (16)
  • TN7135 (16)
  • TN8025 (16)
  • TTI15 (16)
  • TTR (16)
  • TTS (16)
  • TTX (16)
  • WBH10C (16)
  • WBH10P (16)
  • WBH10U (16)
  • WBH20P (16)
  • WBH25P (16)
  • WBH25U (16)
  • WBH30P (16)
  • WBK40U (16)
  • WBK45U (16)
  • WDN00U (16)
  • WDN25U (16)
  • WK05CT (16)
  • WK15CT (16)
  • WK20CT (16)
  • WM15CT (16)
  • WM25CT (16)
  • WM35CT (16)
  • WP05CT (16)
  • WP15CT (16)
  • WP25CT (16)
  • WP35CT (16)
  • WS10PT (16)
  • WS25PT (16)
  • WU10HT (16)
  • X00511 (16)
Hand Of Tool
  • L (8)
  • R (8)
Wiper Insert
  • N (16)
  • Y (16)
Minimum Axial Groove Diameter
  • 1.2598 (3)
  • 1.26 (1)
  • 1.5748 (3)
  • 1.575 (1)
  • 1.9685 (3)
  • 1.969 (1)
  • 2.4803 (4)
to
Minimum Axial Groove Diameter
  • 32.0 (4)
  • 40.0 (4)
  • 50.0 (4)
  • 63.0 (4)
to
Cutting Direction
  • B (16)
Rake Angle Style
  • DOUBLE NEGATIVE (16)
Maximum Bore Depth
  • 50.45 (2)
  • 62.07 (2)
  • 77.14 (2)
  • 88.23 (2)
  • 104.4 (2)
  • 112.07 (2)
  • 117.14 (2)
  • 149.4 (2)
to
Maximum Bore Depth
  • 1.986 (2)
  • 2.444 (2)
  • 3.037 (2)
  • 3.474 (2)
  • 4.11 (2)
  • 4.412 (2)
  • 4.612 (2)
  • 5.882 (2)
to
Boring Bar Material
  • S (16)
frontEnd
Clamp Style
  • M (16)
Insert Shape
  • C-DIAMOND/RHOMBIC 80 (16)
insertGeometry
Cutting Tool Material
  • B H (16)
  • B L (16)
  • C A (16)
  • C N (16)
  • D P (16)
  • H T (16)
  • H W (16)
backEnd
Connection Type
  • TAPER SHANK (16)
System Size
  • KM63TS (16)
Back-End Diameter
  • 2.48 (3)
  • 2.4803 (13)
to
Back-End Diameter
  • 63.0 (16)
to
other
Platform
  • KM63 (16)
Tool Unit
  • M (16)
Over All Length [L]
  • 80.0 (2)
  • 90.0 (2)
  • 100.0 (2)
  • 125.0 (4)
  • 140.0 (4)
  • 170.0 (2)
to
Over All Length [L]
  • 3.1496 (2)
  • 3.5433 (2)
  • 3.937 (2)
  • 4.921 (1)
  • 4.9213 (3)
  • 5.5118 (3)
  • 5.512 (1)
  • 6.6929 (2)
to
Insert Hand
  • N (16)
Cutting Condition Material
  • H-All (16)
  • K-All (16)
  • K1 (16)
  • M-All (16)
  • N-All (16)
  • P-All (16)
  • S-All (16)
  • S2 (16)
  • S4 (16)
No filters matching ""
Change the visible columns with any of the parameters listed below. A maximum of 7 columns can be displayed.
Displaying 1- 10 of 16 results
Select Columns
Select Filters
Metric
Inch
Show
Metric
Inch
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert Weight Kilograms Weight Pounds
2265330 KM63TSS25FMCLNL12 KM63TSS25FMCLNL12 32.0000 1.259 17.0000 .6693 50.4500 1.986 80.0000 3.149 CN..120408/CN..432 0.90 1.99
    List price:
    $501.10 /each.
    Your price::
    Qty
    2265329 KM63TSS25FMCLNR12 KM63TSS25FMCLNR12 32.0000 1.259 17.0000 .6693 50.4500 1.986 80.0000 3.149 CN..120408/CN..432 0.90 1.99
      List price:
      $501.10 /each.
      Your price::
      Qty
      2265328 KM63TSS25KMCLNL12 KM63TSS25KMCLNL12 32.0000 1.260 17.0000 .6690 88.2300 3.474 125.0000 4.921 CNMA120408/CNMA432 1.14 2.52
        List price:
        $501.10 /each.
        Your price::
        Qty
        2265327 KM63TSS25KMCLNR12 KM63TSS25KMCLNR12 32.0000 1.259 17.0000 .6693 88.2300 3.474 125.0000 4.921 CN..120408/CN..432 1.14 2.52
          List price:
          $501.10 /each.
          Your price::
          Qty
          2265344 KM63TSS32GMCLNL12 KM63TSS32GMCLNL12 40.0000 1.574 22.0000 .8661 62.0700 2.444 90.0000 3.543 CN..120408/CN..432 1.06 2.34
            List price:
            $501.10 /each.
            Your price::
            Qty
            2265343 KM63TSS32GMCLNR12 KM63TSS32GMCLNR12 40.0000 1.574 22.0000 .8661 62.0700 2.444 90.0000 3.543 CN..120408/CN..432 1.05 2.32
              List price:
              $501.10 /each.
              Your price::
              Qty
              2265332 KM63TSS32LMCLNL12 KM63TSS32LMCLNL12 40.0000 1.574 22.0000 .8661 112.0700 4.412 140.0000 5.511 CN..120408/CN..432 1.37 3.01
                List price:
                $501.10 /each.
                Your price::
                Qty
                2265331 KM63TSS32LMCLNR12 KM63TSS32LMCLNR12 40.0000 1.575 22.0000 .8660 112.0700 4.412 140.0000 5.512 CNMA120408/CNMA432 1.37 3.01
                  List price:
                  $501.10 /each.
                  Your price::
                  Qty
                  2265348 KM63TSS40HMCLNL12 KM63TSS40HMCLNL12 50.0000 1.968 27.0000 1.063 77.1400 3.037 100.0000 3.937 CN..120408/CN..432 1.33 2.93
                    List price:
                    $501.10 /each.
                    Your price::
                    Qty
                    2265347 KM63TSS40HMCLNR12 KM63TSS40HMCLNR12 50.0000 1.969 27.0000 1.063 77.1400 3.037 100.0000 3.937 CNMA120408/CNMA432 1.30 2.87
                      List price:
                      $501.10 /each.
                      Your price::
                      Qty
                      2265346 KM63TSS40LMCLNL12 KM63TSS40LMCLNL12 50.0000 1.968 27.0000 1.063 117.1400 4.612 140.0000 5.511 CN..120408/CN..432 1.69 3.72
                        List price:
                        $501.10 /each.
                        Your price::
                        Qty
                        2265345 KM63TSS40LMCLNR12 KM63TSS40LMCLNR12 50.0000 1.968 27.0000 1.063 117.1400 4.612 140.0000 5.511 CN..120408/CN..432 1.69 3.72
                          List price:
                          $501.10 /each.
                          Your price::
                          Qty
                          2265352 KM63TSS50KMCLNL12 KM63TSS50KMCLNL12 63.0000 2.480 35.0000 1.378 104.4000 4.110 125.0000 4.921 CN..120408/CN..432 2.01 4.43
                            List price:
                            $501.10 /each.
                            Your price::
                            Qty
                            2265351 KM63TSS50KMCLNR12 KM63TSS50KMCLNR12 63.0000 2.480 35.0000 1.378 104.4000 4.110 125.0000 4.921 CN..120408/CN..432 1.99 4.40
                              List price:
                              $501.10 /each.
                              Your price::
                              Qty
                              2265350 KM63TSS50PMCLNL12 KM63TSS50PMCLNL12 63.0000 2.480 35.0000 1.378 149.4000 5.882 170.0000 6.692 CN..120408/CN..432 2.68 5.91
                                List price:
                                $501.10 /each.
                                Your price::
                                Qty
                                2265349 KM63TSS50PMCLNR12 KM63TSS50PMCLNR12 63.0000 2.480 35.0000 1.378 149.4000 5.882 170.0000 6.692 CN..120408/CN..432 2.68 5.91
                                  List price:
                                  $501.10 /each.
                                  Your price::
                                  Qty
                                  List price:
                                  Discount: %
                                  Your price::
                                  Replacement This item is not available
                                  Replacement Product This item may be available through a distributor
                                  Qty

                                  Sold in pkg. of

                                  If you create a new solution, you will lose any solutions you were working on already. How would you like to proceed?
                                  You are about to create a duplicate . Do you want to proceed?
                                  You are about to delete Do you want to proceed?
                                  What would you like to rename your to?
                                  Please enter a valid name
                                  Please enter a name for the duplicate
                                  Please enter a valid name
                                  You are about to add to your My Solutions page. Do you want to proceed?
                                  Please enter a valid name
                                  Send a copy of

                                  Please enter a valid Email
                                  Please enter a valid name

                                  We have found the following CAD Drawings

                                  Select the files you are looking for and download them all at once

                                  You should be logged to see your dashboard information
                                  The product/s () you were trying to add to the cart is/are not available, please contact customer service.
                                  item(s) successfully added to the cart
                                  View Cart