Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Máte otázku týkající se produktu?

Zobrazit úplný seznam globálních servisních odborníků podle specializace.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Zpět k řešení

Úprava řešení

Přidání řešení

Název řešení: {{SolutionName}}

Inserts

Vybrat filtry
Filters
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (156)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (156)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (156)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (156)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (156)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (156)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (156)
  • M Stainless Steel (256)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (256)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (256)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (256)
  • K Cast Iron (256)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (256)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (256)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (256)
  • N Non-Ferrous Materials (100)
    • N1
      Wrought Aluminum
      (100)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (100)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (100)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (100)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (100)
    • N6
      Carbon, Graphite Composites, CFRP
      (100)
    • N7
      MMC's
      (100)
  • S High-Temp Alloys (156)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (156)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (156)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (156)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (156)
Select All Star
  • CN (22)
  • DE (24)
  • GB (1)
  • IN (3)
  • SG (23)
  • US (21)
Cutting Diameter
Cutting Diameter
  • 0.63 in (3)
  • 0.638 in (2)
  • 0.641 in (3)
  • 0.65 in (3)
  • 0.656 in (3)
  • 0.669 in (3)
  • 0.672 in (3)
  • 0.689 in (2)
  • 0.69 in (3)
  • 0.694 in (2)
  • 0.702 in (2)
  • 0.704 in (2)
  • 0.709 in (3)
  • 0.719 in (2)
  • 0.728 in (3)
  • 0.734 in (2)
  • 0.74 in (2)
  • 0.748 in (3)
  • 0.75 in (3)
  • 0.756 in (2)
  • 0.759 in (2)
  • 0.766 in (2)
  • 0.768 in (3)
  • 0.776 in (2)
  • 0.781 in (3)
  • 0.787 in (3)
  • 0.791 in (2)
  • 0.795 in (2)
  • 0.797 in (2)
  • 0.799 in (2)
  • 0.803 in (2)
  • 0.807 in (3)
  • 0.811 in (2)
  • 0.814 in (2)
  • 0.816 in (2)
  • 0.82 in (2)
  • 0.824 in (2)
  • 0.828 in (3)
  • 0.844 in (2)
  • 0.846 in (3)
  • 0.866 in (3)
  • 0.875 in (2)
  • 0.884 in (2)
  • 0.886 in (3)
  • 0.906 in (3)
  • 0.925 in (3)
  • 0.937 in (2)
  • 0.946 in (3)
  • 0.965 in (3)
  • 0.969 in (2)
  • 0.984 in (3)
  • 1.0 in (3)
  • 1.004 in (3)
  • 1.012 in (4)
  • 1.014 in (2)
  • 1.016 in (2)
  • 1.024 in (3)
  • 1.032 in (2)
  • 1.039 in (3)
  • 1.043 in (3)
  • 1.047 in (2)
  • 1.063 in (3)
  • 1.083 in (3)
  • 1.094 in (2)
  • 1.102 in (3)
  • 1.109 in (2)
  • 1.122 in (3)
  • 1.125 in (2)
  • 1.143 in (3)
  • 1.156 in (2)
  • 1.161 in (3)
  • 1.172 in (2)
  • 1.181 in (3)
  • 1.188 in (2)
  • 1.201 in (3)
  • 1.219 in (2)
  • 1.22 in (3)
  • 1.24 in (3)
  • 1.25 in (3)
  • 1.26 in (3)
  • 1.28 in (3)
  • 1.299 in (3)
  • 1.313 in (2)
  • 1.339 in (3)
  • 1.344 in (2)
  • 1.375 in (2)
  • 1.379 in (3)
  • 1.399 in (3)
  • 1.417 in (3)
  • 1.437 in (3)
  • 1.457 in (3)
  • 1.476 in (3)
  • 1.496 in (3)
  • 1.5 in (3)
  • 1.508 in (1)
  • 1.516 in (3)
  • 1.536 in (3)
  • 1.547 in (1)
  • 1.555 in (3)
  • 1.575 in (3)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 16.0 mm (3)
  • 16.2 mm (2)
  • 16.276 mm (3)
  • 16.5 mm (3)
  • 16.675 mm (3)
  • 17.0 mm (3)
  • 17.075 mm (3)
  • 17.475 mm (2)
  • 17.5 mm (3)
  • 17.6 mm (2)
  • 17.8 mm (2)
  • 17.85 mm (2)
  • 18.0 mm (3)
  • 18.25 mm (2)
  • 18.5 mm (3)
  • 18.651 mm (2)
  • 18.8 mm (2)
  • 19.0 mm (3)
  • 19.05 mm (3)
  • 19.201 mm (2)
  • 19.276 mm (2)
  • 19.451 mm (2)
  • 19.5 mm (3)
  • 19.701 mm (2)
  • 19.85 mm (3)
  • 20.0 mm (3)
  • 20.1 mm (2)
  • 20.201 mm (2)
  • 20.25 mm (2)
  • 20.3 mm (2)
  • 20.401 mm (2)
  • 20.5 mm (3)
  • 20.6 mm (2)
  • 20.651 mm (2)
  • 20.701 mm (2)
  • 20.8 mm (2)
  • 20.901 mm (2)
  • 21.0 mm (3)
  • 21.425 mm (2)
  • 21.5 mm (3)
  • 22.0 mm (3)
  • 22.225 mm (2)
  • 22.451 mm (2)
  • 22.5 mm (3)
  • 23.0 mm (3)
  • 23.5 mm (3)
  • 23.8 mm (2)
  • 24.0 mm (3)
  • 24.5 mm (3)
  • 24.6 mm (2)
  • 25.0 mm (3)
  • 25.401 mm (3)
  • 25.5 mm (3)
  • 25.675 mm (2)
  • 25.701 mm (2)
  • 25.75 mm (2)
  • 25.8 mm (2)
  • 26.0 mm (3)
  • 26.201 mm (2)
  • 26.401 mm (3)
  • 26.5 mm (3)
  • 26.6 mm (2)
  • 27.0 mm (3)
  • 27.5 mm (3)
  • 27.776 mm (2)
  • 28.0 mm (3)
  • 28.175 mm (2)
  • 28.5 mm (3)
  • 28.576 mm (2)
  • 29.0 mm (3)
  • 29.375 mm (2)
  • 29.5 mm (3)
  • 29.776 mm (2)
  • 30.0 mm (3)
  • 30.175 mm (2)
  • 30.5 mm (3)
  • 30.951 mm (2)
  • 31.0 mm (3)
  • 31.5 mm (3)
  • 31.75 mm (3)
  • 32.0 mm (3)
  • 32.5 mm (3)
  • 33.0 mm (3)
  • 33.35 mm (2)
  • 34.0 mm (3)
  • 34.125 mm (2)
  • 34.926 mm (2)
  • 35.0 mm (3)
  • 35.5 mm (3)
  • 36.0 mm (3)
  • 36.5 mm (3)
  • 37.0 mm (3)
  • 37.5 mm (3)
  • 38.0 mm (3)
  • 38.1 mm (3)
  • 38.301 mm (1)
  • 38.5 mm (3)
  • 39.0 mm (3)
  • 39.301 mm (1)
  • 39.5 mm (3)
  • 40.0 mm (3)
Cutting Diameter Min komu Cutting Diameter Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WM15PD (100)
  • WP40PD (156)
frontEnd
Point Angle
Point Angle
  • 140.0 (200)
  • 150.0 (56)
Point Angle Min komu Point Angle Max
insertGeometry
Insert Seat Size
Insert Seat Size
  • A (14)
  • B (17)
  • C (12)
  • D (20)
  • E (26)
  • F (8)
  • G (10)
  • H (8)
  • I (8)
  • J (17)
  • K (13)
  • L (8)
  • M (10)
  • N (10)
  • O (10)
  • P (9)
  • Q (11)
  • R (13)
  • S (12)
  • T (20)
Cutting Diameter Insert
Cutting Diameter Insert
  • 0.63 in (3)
  • 0.638 in (2)
  • 0.641 in (3)
  • 0.65 in (3)
  • 0.656 in (3)
  • 0.669 in (3)
  • 0.672 in (3)
  • 0.689 in (2)
  • 0.69 in (3)
  • 0.694 in (2)
  • 0.702 in (2)
  • 0.704 in (2)
  • 0.709 in (3)
  • 0.719 in (2)
  • 0.728 in (3)
  • 0.734 in (2)
  • 0.74 in (2)
  • 0.748 in (3)
  • 0.75 in (3)
  • 0.756 in (2)
  • 0.759 in (2)
  • 0.766 in (2)
  • 0.768 in (3)
  • 0.776 in (2)
  • 0.781 in (3)
  • 0.787 in (3)
  • 0.791 in (2)
  • 0.795 in (2)
  • 0.797 in (2)
  • 0.799 in (2)
  • 0.803 in (2)
  • 0.807 in (3)
  • 0.811 in (2)
  • 0.814 in (2)
  • 0.816 in (2)
  • 0.82 in (2)
  • 0.824 in (2)
  • 0.828 in (3)
  • 0.844 in (2)
  • 0.846 in (3)
  • 0.866 in (3)
  • 0.875 in (2)
  • 0.884 in (2)
  • 0.886 in (3)
  • 0.906 in (3)
  • 0.925 in (3)
  • 0.937 in (2)
  • 0.946 in (3)
  • 0.965 in (3)
  • 0.969 in (2)
  • 0.984 in (3)
  • 1.0 in (3)
  • 1.004 in (3)
  • 1.012 in (4)
  • 1.014 in (2)
  • 1.016 in (2)
  • 1.024 in (3)
  • 1.032 in (2)
  • 1.039 in (3)
  • 1.043 in (3)
  • 1.047 in (2)
  • 1.063 in (3)
  • 1.083 in (3)
  • 1.094 in (2)
  • 1.102 in (3)
  • 1.109 in (2)
  • 1.122 in (3)
  • 1.125 in (2)
  • 1.143 in (3)
  • 1.156 in (2)
  • 1.161 in (3)
  • 1.172 in (2)
  • 1.181 in (3)
  • 1.188 in (2)
  • 1.201 in (3)
  • 1.219 in (2)
  • 1.22 in (3)
  • 1.24 in (3)
  • 1.25 in (3)
  • 1.26 in (3)
  • 1.28 in (3)
  • 1.299 in (3)
  • 1.313 in (2)
  • 1.339 in (3)
  • 1.344 in (2)
  • 1.375 in (2)
  • 1.379 in (3)
  • 1.399 in (3)
  • 1.417 in (3)
  • 1.437 in (3)
  • 1.457 in (3)
  • 1.476 in (3)
  • 1.496 in (3)
  • 1.5 in (3)
  • 1.508 in (1)
  • 1.516 in (3)
  • 1.536 in (3)
  • 1.547 in (1)
  • 1.555 in (3)
  • 1.575 in (3)
Cutting Diameter Insert Min komu Cutting Diameter Insert Max
Cutting Diameter Insert
Cutting Diameter Insert
  • 16.0 mm (3)
  • 16.2 mm (2)
  • 16.276 mm (3)
  • 16.5 mm (3)
  • 16.675 mm (3)
  • 17.0 mm (3)
  • 17.075 mm (3)
  • 17.475 mm (2)
  • 17.5 mm (3)
  • 17.6 mm (2)
  • 17.8 mm (2)
  • 17.85 mm (2)
  • 18.0 mm (3)
  • 18.25 mm (2)
  • 18.5 mm (3)
  • 18.651 mm (2)
  • 18.8 mm (2)
  • 19.0 mm (3)
  • 19.05 mm (3)
  • 19.201 mm (2)
  • 19.276 mm (2)
  • 19.451 mm (2)
  • 19.5 mm (3)
  • 19.701 mm (2)
  • 19.85 mm (3)
  • 20.0 mm (3)
  • 20.1 mm (2)
  • 20.201 mm (2)
  • 20.25 mm (2)
  • 20.3 mm (2)
  • 20.401 mm (2)
  • 20.5 mm (3)
  • 20.6 mm (2)
  • 20.651 mm (2)
  • 20.701 mm (2)
  • 20.8 mm (2)
  • 20.901 mm (2)
  • 21.0 mm (3)
  • 21.425 mm (2)
  • 21.5 mm (3)
  • 22.0 mm (3)
  • 22.225 mm (2)
  • 22.451 mm (2)
  • 22.5 mm (3)
  • 23.0 mm (3)
  • 23.5 mm (3)
  • 23.8 mm (2)
  • 24.0 mm (3)
  • 24.5 mm (3)
  • 24.6 mm (2)
  • 25.0 mm (3)
  • 25.401 mm (3)
  • 25.5 mm (3)
  • 25.675 mm (2)
  • 25.701 mm (2)
  • 25.75 mm (2)
  • 25.8 mm (2)
  • 26.0 mm (3)
  • 26.201 mm (2)
  • 26.401 mm (3)
  • 26.5 mm (3)
  • 26.6 mm (2)
  • 27.0 mm (3)
  • 27.5 mm (3)
  • 27.776 mm (2)
  • 28.0 mm (3)
  • 28.175 mm (2)
  • 28.5 mm (3)
  • 28.576 mm (2)
  • 29.0 mm (3)
  • 29.375 mm (2)
  • 29.5 mm (3)
  • 29.776 mm (2)
  • 30.0 mm (3)
  • 30.175 mm (2)
  • 30.5 mm (3)
  • 30.951 mm (2)
  • 31.0 mm (3)
  • 31.5 mm (3)
  • 31.75 mm (3)
  • 32.0 mm (3)
  • 32.5 mm (3)
  • 33.0 mm (3)
  • 33.35 mm (2)
  • 34.0 mm (3)
  • 34.125 mm (2)
  • 34.926 mm (2)
  • 35.0 mm (3)
  • 35.5 mm (3)
  • 36.0 mm (3)
  • 36.5 mm (3)
  • 37.0 mm (3)
  • 37.5 mm (3)
  • 38.0 mm (3)
  • 38.1 mm (3)
  • 38.301 mm (1)
  • 38.5 mm (3)
  • 39.0 mm (3)
  • 39.301 mm (1)
  • 39.5 mm (3)
  • 40.0 mm (3)
Cutting Diameter Insert Min komu Cutting Diameter Insert Max