Oznámení

Označit vše jako přečtené

VICTORY Top Drill M1™

Vybrat filtry
Filters
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (439)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (439)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (439)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (439)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (439)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (439)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (7)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (7)
  • M Stainless Steel (7)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (7)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (7)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (7)
  • K Cast Iron (439)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (439)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (439)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (7)
  • N Non-Ferrous Materials (1)
    • N1
      Wrought Aluminum
      (1)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1)
    • N6
      Carbon, Graphite Composites, CFRP
      (1)
    • N7
      MMC's
      (1)
  • S High-Temp Alloys (7)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (7)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (7)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (7)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (7)
Select All Star
  • CN (28)
  • DE (181)
  • GB (33)
  • IN (22)
  • SG (163)
  • US (108)
Applications
Applications
  • Drilling Drilling (231)
  • Inclined Exit Drilling Inclined Exit Drilling (224)
  • Stacked Plates Drilling Stacked Plates Drilling (224)
Cutting Diameter
Cutting Diameter
  • 0.313 in (10)
  • 0.315 in (10)
  • 0.319 in (10)
  • 0.321 in (10)
  • 0.323 in (10)
  • 0.327 in (10)
  • 0.328 in (10)
  • 0.331 in (10)
  • 0.332 in (10)
  • 0.335 in (10)
  • 0.339 in (11)
  • 0.343 in (10)
  • 0.345 in (10)
  • 0.347 in (10)
  • 0.349 in (10)
  • 0.351 in (10)
  • 0.354 in (10)
  • 0.358 in (11)
  • 0.359 in (10)
  • 0.362 in (10)
  • 0.366 in (10)
  • 0.368 in (10)
  • 0.37 in (10)
  • 0.374 in (13)
  • 0.375 in (13)
  • 0.376 in (13)
  • 0.377 in (13)
  • 0.378 in (13)
  • 0.382 in (13)
  • 0.386 in (13)
  • 0.39 in (13)
  • 0.391 in (13)
  • 0.394 in (10)
  • 0.395 in (10)
  • 0.397 in (10)
  • 0.398 in (10)
  • 0.402 in (10)
  • 0.404 in (10)
  • 0.406 in (10)
  • 0.408 in (10)
  • 0.41 in (10)
  • 0.414 in (20)
  • 0.417 in (10)
  • 0.421 in (10)
  • 0.422 in (10)
  • 0.425 in (10)
  • 0.429 in (10)
  • 0.433 in (10)
  • 0.437 in (11)
  • 0.441 in (10)
  • 0.445 in (10)
  • 0.449 in (10)
  • 0.453 in (11)
  • 0.457 in (11)
  • 0.461 in (10)
  • 0.465 in (10)
  • 0.47 in (11)
  • 0.473 in (10)
  • 0.477 in (10)
  • 0.48 in (10)
  • 0.484 in (10)
  • 0.488 in (10)
  • 0.491 in (10)
  • 0.492 in (13)
  • 0.496 in (13)
  • 0.5 in (13)
  • 0.504 in (13)
  • 0.508 in (13)
  • 0.512 in (10)
  • 0.516 in (10)
  • 0.52 in (10)
  • 0.524 in (10)
  • 0.528 in (10)
  • 0.531 in (20)
  • 0.535 in (10)
  • 0.539 in (10)
  • 0.543 in (10)
  • 0.547 in (11)
  • 0.551 in (10)
  • 0.555 in (10)
  • 0.559 in (10)
  • 0.564 in (11)
  • 0.568 in (10)
  • 0.572 in (10)
  • 0.576 in (10)
  • 0.578 in (11)
  • 0.579 in (10)
  • 0.583 in (10)
  • 0.587 in (10)
  • 0.591 in (10)
  • 0.63 in (10)
  • 0.631 in (10)
  • 0.633 in (10)
  • 0.634 in (10)
  • 0.637 in (10)
  • 0.638 in (10)
  • 0.641 in (10)
  • 0.642 in (10)
  • 0.646 in (10)
  • 0.828 in (20)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 7.95 mm (10)
  • 8.0 mm (10)
  • 8.1 mm (10)
  • 8.15 mm (10)
  • 8.201 mm (10)
  • 8.3 mm (10)
  • 8.326 mm (10)
  • 8.4 mm (10)
  • 8.425 mm (10)
  • 8.5 mm (10)
  • 8.6 mm (11)
  • 8.701 mm (10)
  • 8.725 mm (10)
  • 8.8 mm (10)
  • 8.85 mm (10)
  • 8.9 mm (10)
  • 9.0 mm (10)
  • 9.1 mm (11)
  • 9.125 mm (10)
  • 9.201 mm (10)
  • 9.3 mm (10)
  • 9.35 mm (10)
  • 9.4 mm (10)
  • 9.5 mm (13)
  • 9.525 mm (13)
  • 9.55 mm (13)
  • 9.576 mm (13)
  • 9.601 mm (13)
  • 9.701 mm (13)
  • 9.8 mm (13)
  • 9.9 mm (13)
  • 9.925 mm (13)
  • 10.0 mm (10)
  • 10.025 mm (10)
  • 10.076 mm (10)
  • 10.101 mm (10)
  • 10.201 mm (10)
  • 10.25 mm (10)
  • 10.3 mm (10)
  • 10.326 mm (10)
  • 10.4 mm (10)
  • 10.5 mm (20)
  • 10.601 mm (10)
  • 10.701 mm (10)
  • 10.726 mm (10)
  • 10.8 mm (10)
  • 10.9 mm (10)
  • 11.0 mm (10)
  • 11.101 mm (11)
  • 11.201 mm (10)
  • 11.3 mm (10)
  • 11.4 mm (10)
  • 11.5 mm (11)
  • 11.601 mm (11)
  • 11.701 mm (10)
  • 11.8 mm (10)
  • 11.9 mm (11)
  • 12.0 mm (10)
  • 12.101 mm (10)
  • 12.201 mm (10)
  • 12.3 mm (10)
  • 12.4 mm (10)
  • 12.476 mm (10)
  • 12.5 mm (13)
  • 12.601 mm (13)
  • 12.701 mm (13)
  • 12.8 mm (13)
  • 12.9 mm (13)
  • 13.0 mm (10)
  • 13.101 mm (10)
  • 13.201 mm (10)
  • 13.3 mm (10)
  • 13.4 mm (10)
  • 13.5 mm (20)
  • 13.601 mm (10)
  • 13.701 mm (10)
  • 13.8 mm (10)
  • 13.9 mm (11)
  • 14.0 mm (10)
  • 14.101 mm (10)
  • 14.201 mm (10)
  • 14.3 mm (11)
  • 14.4 mm (10)
  • 14.5 mm (10)
  • 14.601 mm (10)
  • 14.675 mm (11)
  • 14.701 mm (10)
  • 14.8 mm (10)
  • 14.9 mm (10)
  • 15.0 mm (10)
  • 16.0 mm (10)
  • 16.026 mm (10)
  • 16.075 mm (10)
  • 16.1 mm (10)
  • 16.175 mm (10)
  • 16.2 mm (10)
  • 16.276 mm (10)
  • 16.3 mm (10)
  • 16.401 mm (10)
  • 21.0 mm (20)
Cutting Diameter Min komu Cutting Diameter Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 25.401 mm (1)
  • 25.5 mm (2)
  • 26.901 mm (1)
  • 27.0 mm (2)
  • 28.401 mm (1)
  • 28.5 mm (2)
  • 30.0 mm (4)
  • 31.5 mm (3)
  • 33.0 mm (3)
  • 34.5 mm (3)
  • 36.0 mm (2)
  • 36.1 mm (1)
  • 37.5 mm (2)
  • 37.6 mm (1)
  • 39.0 mm (2)
  • 39.1 mm (2)
  • 40.5 mm (2)
  • 40.6 mm (1)
  • 41.901 mm (1)
  • 42.0 mm (2)
  • 42.401 mm (1)
  • 42.5 mm (2)
  • 43.401 mm (1)
  • 43.5 mm (2)
  • 45.0 mm (6)
  • 47.5 mm (3)
  • 48.0 mm (3)
  • 50.0 mm (4)
  • 51.0 mm (2)
  • 51.1 mm (1)
  • 52.5 mm (2)
  • 52.6 mm (1)
  • 53.801 mm (1)
  • 54.0 mm (2)
  • 55.0 mm (2)
  • 55.1 mm (1)
  • 56.901 mm (1)
  • 57.0 mm (2)
  • 57.401 mm (1)
  • 57.5 mm (2)
  • 59.901 mm (1)
  • 60.0 mm (5)
  • 62.5 mm (3)
  • 63.0 mm (3)
  • 65.0 mm (4)
  • 66.0 mm (3)
  • 67.5 mm (2)
  • 67.601 mm (1)
  • 68.0 mm (3)
  • 69.0 mm (3)
  • 70.0 mm (2)
  • 70.101 mm (1)
  • 72.0 mm (6)
  • 72.4 mm (1)
  • 72.5 mm (2)
  • 74.9 mm (1)
  • 75.0 mm (5)
  • 76.0 mm (3)
  • 78.0 mm (3)
  • 80.0 mm (7)
  • 84.0 mm (3)
  • 85.0 mm (2)
  • 85.101 mm (1)
  • 88.0 mm (2)
  • 89.9 mm (1)
  • 90.0 mm (2)
  • 92.0 mm (3)
  • 95.0 mm (3)
  • 96.0 mm (2)
  • 100.0 mm (6)
  • 104.0 mm (4)
  • 105.0 mm (3)
  • 108.0 mm (3)
  • 109.976 mm (1)
  • 110.0 mm (3)
  • 112.0 mm (3)
  • 115.0 mm (3)
  • 116.0 mm (3)
  • 117.476 mm (1)
  • 120.0 mm (6)
  • 125.0 mm (3)
  • 128.0 mm (2)
  • 130.0 mm (3)
  • 136.0 mm (3)
  • 144.0 mm (3)
  • 152.0 mm (3)
  • 155.576 mm (1)
  • 160.0 mm (3)
  • 168.0 mm (3)
  • 176.0 mm (3)
  • 184.0 mm (3)
  • 192.0 mm (3)
  • 200.0 mm (3)
  • 208.0 mm (3)
Maximum Hole Depth [L4] Min komu Maximum Hole Depth [L4] Max
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
  • 1.0 in (1)
  • 1.004 in (2)
  • 1.059 in (1)
  • 1.063 in (2)
  • 1.118 in (1)
  • 1.122 in (2)
  • 1.181 in (4)
  • 1.24 in (3)
  • 1.299 in (3)
  • 1.358 in (3)
  • 1.417 in (2)
  • 1.421 in (1)
  • 1.476 in (2)
  • 1.48 in (1)
  • 1.536 in (2)
  • 1.539 in (2)
  • 1.594 in (2)
  • 1.598 in (1)
  • 1.651 in (1)
  • 1.655 in (2)
  • 1.669 in (1)
  • 1.673 in (2)
  • 1.709 in (1)
  • 1.713 in (2)
  • 1.772 in (6)
  • 1.87 in (3)
  • 1.891 in (3)
  • 1.969 in (4)
  • 2.008 in (2)
  • 2.012 in (1)
  • 2.067 in (2)
  • 2.071 in (1)
  • 2.118 in (1)
  • 2.126 in (2)
  • 2.165 in (2)
  • 2.169 in (1)
  • 2.24 in (1)
  • 2.244 in (2)
  • 2.261 in (1)
  • 2.265 in (2)
  • 2.358 in (1)
  • 2.362 in (5)
  • 2.461 in (3)
  • 2.48 in (3)
  • 2.559 in (4)
  • 2.598 in (3)
  • 2.657 in (2)
  • 2.661 in (1)
  • 2.677 in (3)
  • 2.717 in (3)
  • 2.757 in (2)
  • 2.761 in (1)
  • 2.835 in (6)
  • 2.85 in (1)
  • 2.854 in (2)
  • 2.949 in (1)
  • 2.953 in (5)
  • 2.992 in (3)
  • 3.071 in (3)
  • 3.15 in (7)
  • 3.307 in (3)
  • 3.346 in (2)
  • 3.35 in (1)
  • 3.465 in (2)
  • 3.539 in (1)
  • 3.543 in (2)
  • 3.622 in (3)
  • 3.74 in (3)
  • 3.781 in (2)
  • 3.938 in (6)
  • 4.094 in (4)
  • 4.134 in (3)
  • 4.252 in (3)
  • 4.33 in (1)
  • 4.331 in (3)
  • 4.409 in (3)
  • 4.529 in (3)
  • 4.567 in (3)
  • 4.625 in (1)
  • 4.724 in (6)
  • 4.921 in (3)
  • 5.039 in (2)
  • 5.118 in (3)
  • 5.354 in (3)
  • 5.67 in (3)
  • 5.984 in (3)
  • 6.125 in (1)
  • 6.299 in (3)
  • 6.614 in (3)
  • 6.929 in (3)
  • 7.244 in (3)
  • 7.559 in (3)
  • 7.875 in (3)
  • 8.189 in (3)
Maximum Hole Depth [L4] Min komu Maximum Hole Depth [L4] Max
Reach
Reach
  • 1.379 in (1)
  • 1.408 in (1)
  • 1.417 in (1)
  • 1.457 in (1)
  • 1.534 in (1)
  • 1.536 in (1)
  • 1.543 in (1)
  • 1.587 in (1)
  • 1.614 in (1)
  • 1.659 in (2)
  • 1.665 in (2)
  • 1.693 in (1)
  • 1.772 in (1)
  • 1.784 in (2)
  • 1.839 in (1)
  • 1.85 in (1)
  • 1.909 in (1)
  • 1.929 in (1)
  • 1.961 in (1)
  • 1.969 in (1)
  • 2.035 in (1)
  • 2.047 in (1)
  • 2.087 in (2)
  • 2.091 in (1)
  • 2.126 in (1)
  • 2.158 in (3)
  • 2.165 in (1)
  • 2.205 in (2)
  • 2.217 in (2)
  • 2.283 in (4)
  • 2.291 in (1)
  • 2.323 in (1)
  • 2.343 in (2)
  • 2.362 in (1)
  • 2.41 in (2)
  • 2.418 in (1)
  • 2.441 in (1)
  • 2.472 in (1)
  • 2.48 in (1)
  • 2.535 in (2)
  • 2.543 in (1)
  • 2.587 in (1)
  • 2.591 in (1)
  • 2.598 in (2)
  • 2.657 in (1)
  • 2.658 in (1)
  • 2.717 in (1)
  • 2.721 in (1)
  • 2.757 in (1)
  • 2.783 in (2)
  • 2.835 in (1)
  • 2.839 in (1)
  • 2.846 in (1)
  • 2.908 in (1)
  • 2.953 in (2)
  • 2.961 in (1)
  • 2.972 in (1)
  • 3.031 in (1)
  • 3.035 in (1)
  • 3.071 in (1)
  • 3.087 in (1)
  • 3.091 in (3)
  • 3.11 in (1)
  • 3.134 in (1)
  • 3.157 in (1)
  • 3.16 in (2)
  • 3.165 in (1)
  • 3.189 in (1)
  • 3.217 in (2)
  • 3.269 in (2)
  • 3.283 in (3)
  • 3.307 in (1)
  • 3.343 in (1)
  • 3.382 in (1)
  • 3.408 in (1)
  • 3.418 in (1)
  • 3.426 in (1)
  • 3.446 in (1)
  • 3.465 in (1)
  • 3.533 in (3)
  • 3.547 in (1)
  • 3.583 in (2)
  • 3.587 in (1)
  • 3.591 in (1)
  • 3.634 in (1)
  • 3.66 in (2)
  • 3.661 in (1)
  • 3.665 in (1)
  • 3.685 in (1)
  • 3.785 in (3)
  • 3.938 in (2)
  • 4.033 in (3)
  • 4.284 in (3)
  • 4.783 in (2)
  • 5.079 in (2)
  • 5.158 in (2)
  • 5.472 in (2)
  • 5.533 in (2)
  • 5.909 in (2)
  • 7.283 in (2)
Reach Min komu Reach Max
Reach
Reach
  • 35.0 mm (1)
  • 35.775 mm (1)
  • 36.0 mm (1)
  • 37.0 mm (1)
  • 38.95 mm (1)
  • 39.0 mm (1)
  • 39.2 mm (1)
  • 40.301 mm (1)
  • 41.0 mm (1)
  • 42.125 mm (2)
  • 42.301 mm (2)
  • 43.0 mm (1)