Top Drill S™ • Non Ferrous Materials
FiltersX
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
-
N Non-Ferrous Materials (18)
-
N1Wrought Aluminum(18)
-
N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(18)
-
N3High-Silicon Aluminum Alloys Si >12.2%(18)
-
N4Copper, Brass, Zinc-based on machinability index range of 70-100(18)
-
Applications
-
Convex Drilling (18)
-
Corner Style SquareEnd Drilling (18)
-
CornerStyle Chamfer Drilling (18)
-
Counterboring (18)
-
Countersinking (18)
-
Cross Hole Drilling (18)
-
Drilling (18)
-
Flat Bottom Drilling (18)
-
Inclined Entry Drilling (18)
-
Inclined Exit Drilling (18)
-
Pre-Condition (18)
-
Stacked Plates Drilling (18)
-
X-Offset Drilling (18)
Cutting Diameter
to
Cutting Diameter
to
Maximum Hole Depth [L4]
to
Maximum Hole Depth [L4]
to
Reach
to
Reach
to
Connection Style
-
Straight-Cylindrical (18)
Number of Flutes
-
2 (18)
application
Coating
-
Uncoated (18)
Grade Of Cutting Tool
-
WN15HD (18)
Hand Of Tool
-
R (18)
Drill Type
-
81-01 Solid Drill (18)
frontEnd
Point Angle
to
backEnd
Connection Type
-
CYLINDRICAL (18)
Back-End Diameter
to
Back-End Diameter
to
other
Grade
-
WN15HD (18)
Platform
-
Top Drill S (18)
Tool Unit
-
M (18)
Over All Length [L]
to
Over All Length [L]
to
No filters matching ""
View Products in
Metric
Inch
-
Drilling
-
Drilling: Inclined Entry
-
Drilling: Inclined Exit
-
Drilling: Stacked Plates
-
Shank - Cylindrical Plain ≤h6
-
Helix Angle: 30°
-
38563
-
DIN Numbers: ER Collet
-
Drilling - Through Coolant
-
Through Coolant: MQL (Minimum Quantity Lubricant): Drilling
-
38513
View Products
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | [D1] Drill Diameter M | [D1] Drill Diameter M | [L] Overall Length | [L] Overall Length | [L3] Flute Length | [L3] Flute Length | |
|---|---|---|---|---|---|---|---|---|---|---|
| 6288567 | TDS421A04000 | TDS421A04000 | WN15HD | 4.0000 | .1575 | 66.0000 | 2.598 | 24.0000 | .9449 | |
| 6288568 | TDS421A06000 | TDS421A06000 | WN15HD | 6.0000 | .2362 | 66.0000 | 2.598 | 28.0000 | 1.102 | |
| 6288569 | TDS421A08000 | TDS421A08000 | WN15HD | 8.0000 | .3150 | 79.0000 | 3.110 | 41.0000 | 1.614 | |
| 6288570 | TDS421A10000 | TDS421A10000 | WN15HD | 10.0000 | .3937 | 89.0000 | 3.503 | 47.0000 | 1.850 | |
| 6288601 | TDS421A12000 | TDS421A12000 | WN15HD | 12.0000 | .4724 | 102.0000 | 4.015 | 55.0000 | 2.165 | |
| 6288602 | TDS421A14000 | TDS421A14000 | WN15HD | 14.0000 | .5512 | 107.0000 | 4.212 | 60.0000 | 2.362 |
-
-
-
-
-
-
-
-
-
-
-
View Products
| SAP Material Number | ISO Catalog Number | ANSI Catalog Number | Grade | [D1] Drill Diameter M | [D1] Drill Diameter M | [L] Overall Length | [L] Overall Length | [L3] Flute Length | [L3] Flute Length | |
|---|---|---|---|---|---|---|---|---|---|---|
| 6288606 | TDS422A04000 | TDS422A04000 | WN15HD | 4.0000 | .1575 | 74.0000 | 2.913 | 36.0000 | 1.417 | |
| 6288607 | TDS422A06000 | TDS422A06000 | WN15HD | 6.0000 | .2362 | 82.0000 | 3.228 | 44.0000 | 1.732 | |
| 6288608 | TDS422A08000 | TDS422A08000 | WN15HD | 8.0000 | .3150 | 91.0000 | 3.582 | 53.0000 | 2.086 | |
| 6288609 | TDS422A10000 | TDS422A10000 | WN15HD | 10.0000 | .3937 | 103.0000 | 4.055 | 61.0000 | 2.401 | |
| 6288610 | TDS422A12000 | TDS422A12000 | WN15HD | 12.0000 | .4724 | 118.0000 | 4.645 | 71.0000 | 2.795 | |
| 6288611 | TDS422A14000 | TDS422A14000 | WN15HD | 14.0000 | .5512 | 124.0000 | 4.881 | 77.0000 | 3.031 |
