M680+

Vybrat filtry
Filters
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (72)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (72)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (72)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (72)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (72)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (72)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (69)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (69)
  • M Stainless Steel (69)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (69)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (69)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (69)
  • K Cast Iron (94)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (94)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (91)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (91)
  • N Non-Ferrous Materials (45)
    • N1
      Wrought Aluminum
      (45)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (45)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (45)
  • S High-Temp Alloys (63)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (50)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (50)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (50)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (63)
  • H Hardened Materials (35)
    • H1
      Hardened Materials 44-48 HRC
      (35)
    • H2
      Hardened Materials 48-55 HRC
      (27)
    • H3
      Hardened Materials 56-60 HRC
      (27)
Select All Star
  • CN (29)
  • DE (52)
  • GB (8)
  • IN (29)
  • SG (10)
Applications
Applications
  • Face Milling Face Milling (27)
  • Pocket Pocket (8)
  • Pocket Milling Pocket Milling (8)
  • Pocket Plunge Milling Pocket Plunge Milling (8)
  • Ramping Ramping (8)
  • Shoulder Milling Shoulder Milling (27)
  • Shoulder Roughing Shoulder Roughing (8)
  • Shoulder Square End Shoulder Square End (17)
  • Slot Milling Slot Milling (27)
  • Slot Side Slot Side (8)
  • Slot Square End Slot Square End (25)
Cutting Diameter
Cutting Diameter
  • 0.625 in (1)
  • 0.63 in (2)
  • 0.75 in (1)
  • 0.787 in (2)
  • 0.984 in (3)
  • 1.0 in (2)
  • 1.25 in (1)
  • 1.26 in (3)
  • 1.379 in (1)
  • 1.575 in (3)
  • 1.969 in (2)
  • 2.0 in (1)
  • 2.48 in (1)
  • 3.15 in (1)
  • 3.938 in (1)
  • 4.921 in (1)
  • 6.299 in (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 15.875 mm (1)
  • 16.0 mm (2)
  • 19.05 mm (1)
  • 20.0 mm (2)
  • 25.0 mm (3)
  • 25.401 mm (2)
  • 31.75 mm (1)
  • 32.0 mm (3)
  • 35.0 mm (1)
  • 40.0 mm (3)
  • 50.0 mm (2)
  • 50.801 mm (1)
  • 63.0 mm (1)
  • 80.0 mm (1)
  • 100.0 mm (1)
  • 125.0 mm (1)
  • 160.0 mm (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Length
Cutting Length
  • 9.0 mm (10)
  • 13.976 mm (3)
  • 14.0 mm (12)
  • 15.3 mm (1)
  • 15.351 mm (1)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 0.354 in (10)
  • 0.55 in (3)
  • 0.551 in (12)
  • 0.602 in (1)
  • 0.604 in (1)
Cutting Length Min komu Cutting Length Max
Reach
Reach
  • 1.063 in (1)
  • 1.071 in (1)
  • 1.181 in (1)
  • 1.186 in (1)
  • 1.26 in (1)
  • 1.286 in (1)
  • 1.5 in (1)
  • 1.536 in (2)
  • 1.566 in (1)
  • 1.567 in (1)
  • 1.575 in (7)
  • 1.72 in (1)
  • 1.772 in (1)
  • 1.969 in (3)
  • 2.025 in (1)
  • 2.45 in (1)
  • 2.48 in (2)
Reach Min komu Reach Max
Reach
Reach
  • 27.0 mm (1)
  • 27.201 mm (1)
  • 30.0 mm (1)
  • 30.125 mm (1)
  • 32.0 mm (1)
  • 32.676 mm (1)
  • 38.1 mm (1)
  • 39.0 mm (2)
  • 39.776 mm (1)
  • 39.801 mm (1)
  • 40.0 mm (7)
  • 43.7 mm (1)
  • 45.0 mm (1)
  • 50.0 mm (3)
  • 51.426 mm (1)
  • 62.225 mm (1)
  • 63.0 mm (2)
Reach Min komu Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (19)
  • 90.25 (2)
  • 90.28 (2)
  • 90.4 (4)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (5)
  • B-Cutter Retention Screw (3)
  • SHCS or RetScrw Or BoltCircle (1)
  • Screw-On Connection (4)
  • Straight-Cylindrical (8)
  • Weldon (6)
Number of Flutes
Number of Flutes
  • 12 (1)
  • 2 (9)
  • 3 (5)
  • 4 (6)
  • 5 (3)
  • 6 (1)
  • 8 (1)
  • 9 (1)
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.016 in (30)
  • 0.031 in (52)
  • 0.047 in (57)
  • 0.063 in (33)
  • 0.066 in (17)
  • 0.079 in (32)
  • 0.098 in (21)
  • 0.125 in (20)
  • 0.157 in (21)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.4 mm (30)
  • 0.8 mm (52)
  • 1.201 mm (57)
  • 1.6 mm (33)
  • 1.675 mm (17)
  • 2.0 mm (32)
  • 2.5 mm (21)
  • 3.176 mm (20)
  • 4.0 mm (21)
Corner Radius Min komu Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (37)
  • THM-U (20)
  • THR (28)
  • TN2510 (27)
  • TN25M (27)
  • TN450 (27)
  • TN5515 (27)
  • TN6501 (18)
  • TN6502 (18)
  • TN6510 (19)
  • TN6520 (20)
  • TN6525 (21)
  • TN6540 (24)
  • TN7525 (27)
  • TN7535 (27)
  • TTI25 (30)
  • TTM08 (30)
  • TTR (17)
  • WK15CM (40)
  • WK15PM (11)
  • WP35CM (40)
  • WP40PM (24)
  • WS30PM (18)
  • WU20PM (34)
Hand Of Tool
Hand Of Tool
  • R (27)
Rough Finish
Rough Finish
  • FR (5)
Wiper Insert
Wiper Insert
  • N (80)
frontEnd
Insert Shape
Insert Shape
  • X-PARALLELOGRAM 80 (102)
  • X-RECTANGLE MILL 4 90 (18)
  • X-RH0MBIC 70 (14)
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • X-PARALLELOGRAM 80 (75)
  • X-RECTANGLE MILL 4 90 (1)
  • X-RH0MBIC 70 (4)
Insert IC Size
Insert IC Size
  • 9.525 mm (5)
Insert IC Size Min komu Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.375 in (5)
Insert IC Size Min komu Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 8.875 mm (1)
  • 8.951 mm (1)
  • 9.0 mm (1)
  • 9.175 mm (1)
  • 9.451 mm (1)
  • 9.475 mm (5)
  • 9.875 mm (2)
  • 15.675 mm (58)
  • 15.775 mm (3)
  • 15.875 mm (5)
Cutting Edge Length Min komu Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.35 in (1)
  • 0.352 in (1)
  • 0.354 in (1)
  • 0.361 in (1)
  • 0.372 in (1)
  • 0.373 in (5)
  • 0.389 in (2)
  • 0.617 in (58)
  • 0.621 in (3)
  • 0.625 in (5)
Cutting Edge Length Min komu Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • AL (9)
  • ALP (4)
  • GE (11)
  • MM (2)
  • MR (3)
Cutting Tool Material
Cutting Tool Material
  • H T (3)
  • H W (77)
Tolerance Class
Tolerance Class
  • H (73)
  • M (2)
  • N (5)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (14)
  • SCREW-ON (4)
  • SHELL MILL (9)
Back-End Diameter
Back-End Diameter
  • 15.875 mm (1)
  • 16.0 mm (2)
  • 19.05 mm (2)
  • 20.0 mm (2)
  • 22.0 mm (4)
  • 24.375 mm (1)
  • 25.0 mm (2)
  • 25.401 mm (2)
  • 27.0 mm (1)
  • 28.0 mm (3)
  • 31.75 mm (1)
  • 32.0 mm (4)
  • 40.0 mm (2)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.625 in (1)
  • 0.63 in (2)
  • 0.75 in (2)
  • 0.787 in (2)
  • 0.866 in (4)
  • 0.96 in (1)
  • 0.984 in (2)
  • 1.0 in (2)
  • 1.063 in (1)
  • 1.102 in (3)
  • 1.25 in (1)
  • 1.26 in (4)
  • 1.575 in (2)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""
Informace o produktech
Metrické
Palcové

PŮVODNÍ PRODUKT

Břitové destičky • XPHT-AL
(8 Products)
Informace o produktech
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [W] Insert Width [W] Insert Width [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
2031796 XPHT160408AL XPHT332AL THM   2 9.8000 .3858 15.6700 .6169 4.6600 .1835 1.7000 .0669 0.8000 .0312 0.0800 .0031
    Ceníková cena:
    $22.31 /každý
    Vaše cena::
    Počet
    2031798 XPHT160412AL XPHT333AL THM   2 9.8000 .3858 15.6700 .6169 4.6600 .1835 1.4000 .0551 1.2000 .0468 0.0800 .0031
      Ceníková cena:
      $20.65 /každý
      Vaše cena::
      Počet
      2031801 XPHT160416AL XPHT160416AL THM   2 9.8000 .3858 15.6700 .6169 4.6600 .1835 0.9000 .0355 1.6000 .0625 0.0800 .0031
        Ceníková cena:
        $20.65 /každý
        Vaše cena::
        Počet
        2031802 XPHT160420AL XPHT335AL THM   2 9.8000 .3858 15.6700 .6169 4.6600 .1835 1.2000 .0472 2.0000 .0781 0.0800 .0031
          Ceníková cena:
          $20.65 /každý
          Vaše cena::
          Počet
          2029067 XPHT160425AL XPHT336AL THM   2 9.8000 .3858 15.6700 .6169 4.6600 .1835 1.2000 .0472 2.5000 .0984 0.0800 .0031
            Ceníková cena:
            $20.65 /každý
            Vaše cena::
            Počet
            2031804 XPHT160432AL XPHT160432AL THM   2 9.8000 .3858 15.6700 .6169 4.6600 .1835 1.2000 .0472 3.1750 .1250 0.0800 .0031
              Ceníková cena:
              $22.31 /každý
              Vaše cena::
              Počet
              Ceníková cena:
              Sleva: %
              Vaše cena::
              Výměna Tato položka není k dispozici
              Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
              Počet

              Prodáváno v baleních z

              PŮVODNÍ PRODUKT

              Břitové destičky • XPHT-MR
              (3 Products)
              Informace o produktech
              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [W] Insert Width [W] Insert Width [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
              2964142 XPHT160412MR XPHT333MR TN6540   2 9.5250 .3750 15.7720 .6209 4.7600 .1875 1.7000 .0669 1.2000 .0468 0.1800 .0071
                Ceníková cena:
                $20.65 /každý
                Vaše cena::
                Počet
                5427390 XPHT160412MR XPHT333MR WK15CM   2 9.5250 .3750 15.7720 .6209 4.7600 .1875 1.7000 .0669 1.2000 .0468 0.1800 .0071
                  Ceníková cena:
                  $20.65 /každý
                  Vaše cena::
                  Počet
                  6843939 XPHT160412MR XPHT333MR WP35CM   2 9.5250 .3750 15.7720 .6209 4.7600 .1875 1.7000 .0669 1.2000 .0468    
                    Ceníková cena:
                    $23.45 /každý
                    Vaše cena::
                    Počet
                    Ceníková cena:
                    Sleva: %
                    Vaše cena::
                    Výměna Tato položka není k dispozici
                    Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                    Počet

                    Prodáváno v baleních z

                    PŮVODNÍ PRODUKT

                    Břitové destičky • XPHT-ERGE
                    (12 Products)
                    Informace o produktech
                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [W] Insert Width [W] Insert Width [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                    2964170 XPHT160408ERGE XPHT332ERGE TN6540   2 9.4400 .3717 15.6700 .6169 4.7630 .1875 1.8000 .0710 0.8000 .0312 0.1200 .0047
                      Ceníková cena:
                      $20.65 /každý
                      Vaše cena::
                      Počet
                      2964172 XPHT160408ERGE XPHT332ERGE TN6510   2 9.4400 .3717 15.6700 .6169 4.7630 .1875 1.8000 .0710 0.8000 .0312 0.1200 .0047
                        Ceníková cena:
                        $20.65 /každý
                        Vaše cena::
                        Počet
                        5427399 XPHT160408ERGE XPHT332ERGE WK15CM   2 9.4400 .3717 15.6700 .6169 4.7630 .1875 1.8000 .0710 0.8000 .0312 0.1200 .0047
                          Ceníková cena:
                          $20.65 /každý
                          Vaše cena::
                          Počet
                          5519888 XPHT160408ERGE XPHT332ERGE WS30PM   2 9.4400 .3717 15.6700 .6169 4.7630 .1875 1.8000 .0710 0.8000 .0312 0.1200 .0047
                            Ceníková cena:
                            $21.65 /každý
                            Vaše cena::
                            Počet
                            2405344 XPHT160408ERGE XPHT332ERGE TTI25   2 9.4400 .3717 15.6700 .6169 4.7630 .1875 1.8000 .0710 0.8000 .0312 0.1200 .0047
                              Ceníková cena:
                              $20.65 /každý
                              Vaše cena::
                              Počet
                              2964179 XPHT160412ERGE XPHT333ERGE TN6540   2 9.4400 .3717 15.6700 .6169 4.7600 .1875 1.5000 .0590 1.2000 .0469 0.1200 .0047
                                Ceníková cena:
                                $19.52 /každý
                                Vaše cena::
                                Počet
                                Ceníková cena:
                                Sleva: %
                                Vaše cena::
                                Výměna Tato položka není k dispozici
                                Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                                Počet

                                Prodáváno v baleních z

                                PŮVODNÍ PRODUKT

                                Břitové destičky • XPHT
                                (34 Products)
                                Informace o produktech
                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [W] Insert Width [W] Insert Width [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                2964164 XPHT160408 XPHT332 TN6540   2 9.5250 .3750 15.6700 .6169 4.7630 .1875 1.8000 .0709 0.8000 .0312 0.1600 .0063
                                  Ceníková cena:
                                  $19.10 /každý
                                  Vaše cena::
                                  Počet
                                  2025362 XPHT160412 XPHT333 THM   2 9.5250 .3750 15.6700 .6169 4.7630 .1875 1.5000 .0590 1.2000 .0468 0.1600 .0063
                                    Ceníková cena:
                                    $16.75 /každý
                                    Vaše cena::
                                    Počet
                                    2029048 XPHT160412 XPHT333 TTI25   2 9.5250 .3750 15.6700 .6169 4.7630 .1875 1.5000 .0590 1.2000 .0468 0.1600 .0063
                                      Ceníková cena:
                                      $20.24 /každý
                                      Vaše cena::
                                      Počet
                                      2029049 XPHT160412 XPHT160412 THR   2 9.5250 .3750 15.6700 .6169 4.7600 .1875 1.5000 .0590 1.2000 .0468 0.1600 .0063
                                        Ceníková cena:
                                        $16.75 /každý
                                        Vaše cena::
                                        Počet
                                        2964165 XPHT160412 XPHT333 TN6540   2 9.5250 .3750 15.6700 .6169 4.7630 .1875 1.5000 .0590 1.2000 .0468 0.1600 .0063
                                          Ceníková cena:
                                          $19.10 /každý
                                          Vaše cena::
                                          Počet
                                          2964166 XPHT160416 XPHT334 TN6540   2 9.5250 .3750 15.6700 .0617 4.7600 .1875 0.8000 .0315 1.6000 .0625 0.1600 .0063
                                            Ceníková cena:
                                            $20.65 /každý
                                            Vaše cena::
                                            Počet
                                            Ceníková cena:
                                            Sleva: %
                                            Vaše cena::
                                            Výměna Tato položka není k dispozici
                                            Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                                            Počet

                                            Prodáváno v baleních z

                                            PŮVODNÍ PRODUKT

                                            Břitové destičky • XPNT
                                            (5 Products)
                                            Informace o produktech
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [W] Insert Width [W] Insert Width [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                            2964174 XPNT160412 XPNT333 TN6540   2 9.5250 .3750 15.8750 .6250 4.7900 .1886 1.2000 .0472 1.2000 .0468 0.1600 .0063
                                              Ceníková cena:
                                              $16.28 /každý
                                              Vaše cena::
                                              Počet
                                              5427395 XPNT160412 XPNT333 WK15CM   2 9.5250 .3750 15.8750 .6250 4.7900 .1886 1.2000 .0472 1.2000 .0468 0.1600 .0063
                                                Ceníková cena:
                                                $17.37 /každý
                                                Vaše cena::
                                                Počet
                                                2029075 XPNT160412 XPNT160412 TTM08   2 9.5250 .3750 15.8750 .6250 4.7900 .1886 1.2000 .0472 1.2000 .0469 0.1600 .0063
                                                  Ceníková cena:
                                                  $15.53 /každý
                                                  Vaše cena::
                                                  Počet
                                                  2964141 XPNT160412 XPNT333 TN6525   2 9.5250 .3750 15.8750 .6250 4.7900 .1886 1.2000 .0472 1.2000 .0468 0.1600 .0063
                                                    Ceníková cena:
                                                    $16.28 /každý
                                                    Vaše cena::
                                                    Počet
                                                    6826406 XPNT160412 XPNT333 WP35CM   2 9.5250 .3750 15.8750 .6250 4.7900 .1886 1.2000 .0472 1.2000 .0468 0.1600 .0063
                                                      Ceníková cena:
                                                      $17.37 /každý
                                                      Vaše cena::
                                                      Počet
                                                      Ceníková cena:
                                                      Sleva: %
                                                      Vaše cena::
                                                      Výměna Tato položka není k dispozici
                                                      Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                                                      Počet

                                                      Prodáváno v baleních z

                                                      PŮVODNÍ PRODUKT

                                                      Břitové destičky • XD09
                                                      (9 Products)
                                                      Informace o produktech
                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice Cutting Edges per Insert [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [LI] Insert Length [LI] Insert Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                      2568226 XDHT090304 XDHT090304 WU20PM   2 9.1760 .3613 9.4810 .3733 3.1800 .1250 0.3660 .0144 0.4000 .0154 0.0450 .0018
                                                        Ceníková cena:
                                                        $9.87 /každý
                                                        Vaše cena::
                                                        Počet