Návrhy produktů

Product Family suggestions

úspěšně přidáno do košíku
Zobrazit košík

Oznámení

Označit vše jako přečtené
Mobile Menu

M6800 Series

Vybrat filtry
Filters
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (40)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (40)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (40)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (40)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (40)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (40)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (40)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (40)
  • M Stainless Steel (40)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (40)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (40)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (40)
  • K Cast Iron (50)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (50)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (50)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (50)
  • N Non-Ferrous Materials (11)
    • N1
      Wrought Aluminum
      (11)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (11)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (11)
  • S High-Temp Alloys (55)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (55)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (55)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (55)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (55)
  • H Hardened Materials (25)
    • H1
      Hardened Materials 44-48 HRC
      (25)
Applications
Applications
  • Face Milling Face Milling (15)
  • Pocket Pocket (12)
  • Pocket Helical Pocket Helical (12)
  • Pocket Milling Pocket Milling (12)
  • Ramping Ramping (12)
  • Shoulder Milling Shoulder Milling (15)
  • Shoulder Square End Shoulder Square End (15)
  • Slot Milling Slot Milling (15)
  • Slot Square End Slot Square End (15)
Cutting Diameter
Cutting Diameter
  • 0.473 in (1)
  • 0.5 in (1)
  • 0.669 in (1)
  • 0.787 in (2)
  • 1.0 in (5)
  • 1.25 in (1)
  • 1.5 in (1)
  • 1.969 in (1)
  • 2.0 in (1)
  • 3.008 in (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 12.0 mm (1)
  • 12.701 mm (1)
  • 17.0 mm (1)
  • 20.0 mm (2)
  • 25.401 mm (5)
  • 31.75 mm (1)
  • 38.1 mm (1)
  • 50.0 mm (1)
  • 50.801 mm (1)
  • 76.4 mm (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Length
Cutting Length
  • 6.0 mm (9)
  • 15.701 mm (6)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 0.237 in (9)
  • 0.618 in (6)
Cutting Length Min komu Cutting Length Max
Reach
Reach
  • 0.709 in (1)
  • 0.717 in (1)
  • 0.791 in (1)
  • 0.795 in (1)
  • 0.803 in (1)
  • 0.984 in (1)
  • 0.992 in (1)
  • 1.437 in (1)
  • 1.575 in (2)
  • 1.594 in (1)
  • 1.969 in (1)
  • 1.988 in (1)
  • 2.362 in (1)
  • 2.382 in (1)
Reach Min komu Reach Max
Reach
Reach
  • 18.0 mm (1)
  • 18.2 mm (1)
  • 20.1 mm (1)
  • 20.201 mm (1)
  • 20.401 mm (1)
  • 25.0 mm (1)
  • 25.201 mm (1)
  • 36.5 mm (1)
  • 40.0 mm (2)
  • 40.5 mm (1)
  • 50.0 mm (1)
  • 50.5 mm (1)
  • 60.0 mm (1)
  • 60.5 mm (1)
Reach Min komu Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (15)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (3)
  • Straight-Cylindrical (8)
  • Weldon (4)
Number of Flutes
Number of Flutes
  • 12 (1)
  • 2 (4)
  • 3 (2)
  • 4 (2)
  • 5 (4)
  • 6 (1)
  • 7 (1)
Internal Coolant Capability
Internal Coolant Capability
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (15)
  • 0.016 in (27)
  • 0.031 in (29)
  • 0.047 in (10)
  • 0.065 in (7)
  • 0.067 in (2)
  • 0.081 in (6)
  • 0.083 in (7)
  • 0.126 in (6)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (15)
  • 0.4 mm (27)
  • 0.8 mm (29)
  • 1.201 mm (10)
  • 1.651 mm (7)
  • 1.701 mm (2)
  • 2.051 mm (6)
  • 2.1 mm (7)
  • 3.2 mm (6)
Corner Radius Min komu Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THR-S (11)
  • TN6405 (25)
  • TN6425 (24)
  • TN6430 (31)
Hand Of Tool
Hand Of Tool
  • R (15)
Wiper Insert
Wiper Insert
  • N (40)
Maximum Ramp Angle
Maximum Ramp Angle
  • 1.3 (3)
  • 1.5 (1)
  • 2.0 (4)
  • 2.5 (1)
  • 5.0 (1)
  • 8.0 (2)
Maximum Ramp Angle Min komu Maximum Ramp Angle Max
frontEnd
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • X-PARALLELOGRAM 80 (40)
Cutting Edge Length
Cutting Edge Length
  • 7.0 mm (16)
  • 11.0 mm (15)
  • 17.0 mm (9)
Cutting Edge Length Min komu Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.276 in (16)
  • 0.433 in (15)
  • 0.669 in (9)
Cutting Edge Length Min komu Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • AL (5)
  • ML (22)
  • MS (13)
Cutting Tool Material
Cutting Tool Material
  • H W (40)
Tolerance Class
Tolerance Class
  • G (5)
  • M (35)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (12)
  • SHELL MILL (3)
Back-End Diameter
Back-End Diameter
  • 12.0 mm (1)
  • 12.701 mm (1)
  • 16.0 mm (2)
  • 19.05 mm (2)
  • 20.0 mm (1)
  • 22.0 mm (1)
  • 25.401 mm (6)
  • 31.75 mm (1)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.473 in (1)
  • 0.5 in (1)
  • 0.63 in (2)
  • 0.75 in (2)
  • 0.787 in (1)
  • 0.866 in (1)
  • 1.0 in (6)
  • 1.25 in (1)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""
Zúžení podle kategorie:
Informace o produktech
Metrické
Palcové

PŮVODNÍ PRODUKT

90° rohové frézy • Řada M6800

Břitové destičky M6800M
(3 Products)
Informace o produktech
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [W] Insert Width [W] Insert Width [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
3577930 BDMT11T304ERMS BDMT11T304ERMS TN6425 2 11.0000 .4330 6.6600 .2622 3.8100 .1500 1.7900 .0705 0.4000 .0156 0.0800 .0031
    Ceníková cena:
    $15,21 /každý.
    Vaše cena::
    3577934 BDMT11T308ERMS BDMT11T308ERMS TN6425 2 11.0000 .4330 6.6700 .2626 3.8100 .1500 1.4000 .0551 0.8000 .0312 0.0800 .0031
      Ceníková cena:
      $15,21 /každý.
      Vaše cena::
      3577935 BDMT11T308ERMS BDMT11T308ERMS TN6430 2 11.0000 .4330 6.6700 .2626 3.8100 .1500 1.4000 .0551 0.8000 .0312 0.0800 .0031
        Ceníková cena:
        $15,21 /každý.
        Vaše cena::
        Ceníková cena:
        Sleva: %
        Vaše cena::
        Výměna Tato položka není k dispozici
        Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

        PŮVODNÍ PRODUKT

        90° rohové frézy • Řada M6800

        Břitové destičky M6800M
        (3 Products)
        Informace o produktech
        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [W] Insert Width [W] Insert Width [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
        3859299 BDGT11T302FRAL BDGT11T302FRAL THR-S 2 11.0000 .4330 6.6400 .2614 3.8800 .1528 2.0000 .0787 0.2000 .0080 0.0800 .0031
          Ceníková cena:
          $18,61 /každý.
          Vaše cena::
          3859300 BDGT11T304FRAL BDGT11T304FRAL THR-S 2 11.0000 .4330 6.6700 .2626 3.8800 .1528 1.8000 .0709 0.4000 .0156 0.0800 .0031
            Ceníková cena:
            $18,61 /každý.
            Vaše cena::
            3859301 BDGT11T308FRAL BDGT11T308FRAL THR-S 2 11.0000 .4330 6.6800 .2630 3.8800 .1528 1.4000 .0551 0.8000 .0312 0.0800 .0031
              Ceníková cena:
              $18,61 /každý.
              Vaše cena::
              Ceníková cena:
              Sleva: %
              Vaše cena::
              Výměna Tato položka není k dispozici
              Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

              PŮVODNÍ PRODUKT

              90° Shoulder Mills • M6800 Series

              M6800S Tool Bodies
              (4 Products)
              • Shank - Cylindrical PlainShank - Cylindrical Plain
              • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
              • Slotting: Square EndSlotting: Square End
              • Face MillingFace Milling
              • Ramping: BlankRamping: Blank
              • PocketingPocketing
              • Helical MillingHelical Milling
              Informace o produktech
              SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
              3786361 15396440800 15396440800 12.7000 .5000 12.7 .5 83.0600 3.270 83.0600 3.270 18.2000 .7165 6.0000 .2362 2 2.000 45800 Y 0.21
                Ceníková cena:
                $194,82 /každý.
                Vaše cena::
                3786390 15396443200 15396443200 25.4000 1.000 19.05 .75 114.3000 4.500 114.3000 4.500 25.0000 .9843 6.0000 .2362 5 1.300 36900 Y 0.62
                  Ceníková cena:
                  $338,87 /každý.
                  Vaše cena::
                  3786389 15396443400 15396443400 25.4000 1.000 25.4 1.0 114.3000 4.500 114.3000 4.500 25.2000 .9921 6.0000 .2362 7 1.300 36900 Y 0.96
                    Ceníková cena:
                    $406,61 /každý.
                    Vaše cena::
                    3786391 15396447200 15396447200 25.4000 1.000 25.4 1.0 160.0000 6.299 160.0000 6.299 60.0000 2.362 6.0000 .2362 5 1.300 36900 Y 1.34
                      Ceníková cena:
                      $364,30 /každý.
                      Vaše cena::
                      Ceníková cena:
                      Sleva: %
                      Vaše cena::
                      Výměna Tato položka není k dispozici
                      Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                      PŮVODNÍ PRODUKT

                      90° Shoulder Mills • M6800 Series

                      M6800LX Tool Bodies
                      (3 Products)
                      • Shank - Cylindrical Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
                      • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                      • Slotting: Square EndSlotting: Square End
                      • Face MillingFace Milling
                      • Ramping: BlankRamping: Blank
                      • PocketingPocketing
                      • Helical MillingHelical Milling
                      Informace o produktech
                      SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                      3577772 15396480200 15396480200 25.4000 1.000 25.4 1.0 95.2500 3.750 95.2500 3.750 36.5000 1.437 15.7000 .6181 2 8.000 35000 Y 1.00
                        Ceníková cena:
                        $306,74 /každý.
                        Vaše cena::
                        3577774 15396481000 15396481000 31.7500 1.250 25.4 1.0 101.6000 4.000 101.6000 4.000 40.5000 1.594 15.7000 .6181 3 5.000 30000 Y 1.36
                          Ceníková cena:
                          $351,45 /každý.
                          Vaše cena::
                          3577776 15396481800 15396481800 38.1000 1.500 31.75 1.25 110.5000 4.350 110.5000 4.350 50.5000 1.988 15.7000 .6181 4 2.500 25000 Y 1.82
                            Ceníková cena:
                            $386,65 /každý.
                            Vaše cena::
                            Ceníková cena:
                            Sleva: %
                            Vaše cena::
                            Výměna Tato položka není k dispozici
                            Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                            PŮVODNÍ PRODUKT

                            90° Shoulder Mills • M6800 Series

                            M6800LX Tool Bodies
                            (2 Products)
                            • Milling - Side and FaceMilling - Side and Face
                            • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                            • Slotting: Square EndSlotting: Square End
                            • Face MillingFace Milling
                            Informace o produktech
                            SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Pounds
                            3786392 15396470400 15396470400 50.8000 2.000 19.05 .75 40.6400 1.600 40.0000 1.575 40.0000 1.575 15.7000 .6181 4 16800 Y 0.98
                              Ceníková cena:
                              $360,00 /každý.
                              Vaše cena::
                              3786394 15396471600 15396471600 76.4000 3.000 25.4 1.0 48.6920 1.917 50.0000 1.969 50.0000 1.969 15.7000 .6181 6 12250 Y 2.34
                                Ceníková cena:
                                $534,05 /každý.
                                Vaše cena::
                                Ceníková cena:
                                Sleva: %
                                Vaše cena::
                                Výměna Tato položka není k dispozici
                                Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                PŮVODNÍ PRODUKT

                                90° Shoulder Mills • M6800 Series

                                M6800LX Tool Bodies
                                (1 Products)
                                • Shank - Cylindrical PlainShank - Cylindrical Plain
                                • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                                • Slotting: Square EndSlotting: Square End
                                • Face MillingFace Milling
                                • Ramping: BlankRamping: Blank
                                • PocketingPocketing
                                • Helical MillingHelical Milling
                                Informace o produktech
                                SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
                                3577773 15396480400 15396480400 25.4000 1.000 25.4 1.0 160.0000 6.299 160.0000 6.299 60.5000 2.381 15.7000 .6180 2 8.000 35000 Y 1.00
                                  Ceníková cena:
                                  $337,22 /každý.
                                  Vaše cena::
                                  Ceníková cena:
                                  Sleva: %
                                  Vaše cena::
                                  Výměna Tato položka není k dispozici
                                  Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                  PŮVODNÍ PRODUKT

                                  90° rohové frézy • Řada M6800

                                  Frézovací tělesa M6800S
                                  (4 Products)
                                  • Shank - Cylindrical PlainShank - Cylindrical Plain
                                  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                                  • Slotting: Square EndSlotting: Square End
                                  • Face MillingFace Milling
                                  • Ramping: BlankRamping: Blank
                                  • PocketingPocketing
                                  • Helical MillingHelical Milling
                                  Informace o produktech
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                                  3577805 12396440600 12396440600 12.0000 .4720 12.0 .4724 80.0000 3.150 80.0000 3.150 18.0000 .7090 6.0000 .2360 2 2.000 46200 Y 0.09
                                    Ceníková cena:
                                    $210,95 /každý.
                                    Vaše cena::
                                    3577809 12396441400 12396441400 17.0000 .6690 16.0 .6299 100.0000 3.937 100.0000 3.937 20.1000 .7910 6.0000 .2360 3 1.500 42400 Y 0.16
                                      Ceníková cena:
                                      $274,75 /každý.
                                      Vaše cena::
                                      3577812 12396442000 12396442000 20.0000 .7870 16.0 .6299 110.0000 4.331 110.0000 4.331 20.4000 .8030 6.0000 .2360 5 2.000 40200 Y 0.19
                                        Ceníková cena:
                                        $348,35 /každý.
                                        Vaše cena::
                                        3577814 12396442400 12396442400 20.0000 .7870 20.0 .7874 110.0000 4.331 110.0000 4.331 20.2000 .7950 6.0000 .2360 5 2.000 40200 Y 0.27
                                          Ceníková cena:
                                          $348,35 /každý.
                                          Vaše cena::
                                          Ceníková cena:
                                          Sleva: %
                                          Vaše cena::
                                          Výměna Tato položka není k dispozici
                                          Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                          PŮVODNÍ PRODUKT

                                          90° rohové frézy • Řada M6800

                                          Frézovací tělesa M6800S
                                          (1 Products)
                                          • Milling - Side and FaceMilling - Side and Face
                                          • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                                          • Slotting: Square EndSlotting: Square End
                                          • Face MillingFace Milling
                                          Informace o produktech
                                          SAP Material Number ISO Catalog Number ANSI Catalog Number [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [L1] Gage Length [L1] Gage Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
                                          3577803 12396431000 12396431000 50.0000 1.969 22.0 .8661 40.0000 1.575 40.0000 1.575 40.0000 1.575 6.0000 .2360 12 27700 Y 0.41
                                            Ceníková cena:
                                            $733,13 /každý.
                                            Vaše cena::
                                            Ceníková cena:
                                            Sleva: %
                                            Vaše cena::
                                            Výměna Tato položka není k dispozici
                                            Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                            PŮVODNÍ PRODUKT

                                            90° rohové frézy • Řada M6800

                                            Břitové destičky M6800LX
                                            (5 Products)
                                            Informace o produktech
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [W] Insert Width [W] Insert Width [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                            3577949 BDMT170404ERML BDMT170404ERML TN6430 2 17.0000 .6690 9.5900 .3776 4.9020 .1930 2.2800 .0898 0.4000 .0156 0.1000 .0039
                                              Ceníková cena:
                                              $17,77 /každý.
                                              Vaše cena::
                                              3577953 BDMT170408ERML BDMT170408ERML TN6430 2 17.0000 .6690 9.6000 .3780 4.9020 .1930 1.8800 .0740 0.8000 .0312 0.1000 .0039
                                                Ceníková cena:
                                                $17,77 /každý.
                                                Vaše cena::
                                                3577954 BDMT170412ERML BDMT170412ERML TN6405 2 17.0000 .6690 9.6100 .3783 4.9020 .1930 1.4900 .0587 1.2000 .0468 0.1000 .0039
                                                  Ceníková cena:
                                                  $17,77 /každý.
                                                  Vaše cena::
                                                  3577955 BDMT170412ERML BDMT170412ERML TN6430 2 17.0000 .6690 9.6100 .3783 4.9020 .1930 1.4900 .0587 1.2000 .0468 0.1000 .0039
                                                    Ceníková cena:
                                                    $17,77 /každý.
                                                    Vaše cena::
                                                    3577957 BDMT170416ERML BDMT170416ERML TN6430 2 17.0000 .6690 9.6100 .3783 4.9020 .1930 1.0500 .0413 1.6500 .0650 0.1000 .0039
                                                      Ceníková cena:
                                                      $17,77 /každý.
                                                      Vaše cena::
                                                      Ceníková cena:
                                                      Sleva: %
                                                      Vaše cena::
                                                      Výměna Tato položka není k dispozici
                                                      Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                                      PŮVODNÍ PRODUKT

                                                      90° rohové frézy • Řada M6800

                                                      Břitové destičky M6800LX
                                                      (2 Products)
                                                      Informace o produktech
                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [W] Insert Width [W] Insert Width [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                      3859302 BDGT170404FRAL BDGT170404FRAL THR-S 2 17.0000 .6690 9.6030 .3780 5.1000 .2007 2.3000 .0906 0.4000 .0156 0.0800 .0031
                                                        Ceníková cena:
                                                        $21,32 /každý.
                                                        Vaše cena::
                                                        3859373 BDGT170408FRAL BDGT170408FRAL THR-S 2 17.0000 .6690 9.6300 .3791 5.1000 .2007 1.9000 .0748 0.8000 .0312 0.0800 .0031
                                                          Ceníková cena:
                                                          $21,32 /každý.
                                                          Vaše cena::
                                                          Ceníková cena:
                                                          Sleva: %
                                                          Vaše cena::
                                                          Výměna Tato položka není k dispozici
                                                          Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                                          PŮVODNÍ PRODUKT

                                                          90° rohové frézy • Řada M6800

                                                          Břitové destičky M6800LX
                                                          (2 Products)
                                                          Informace o produktech
                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [W] Insert Width [W] Insert Width [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                          3577950 BDMT170408ERMS BDMT170408ERMS TN6425 2 17.0000 .6690 9.6000 .3780 4.9020 .1930 1.8800 .0740 0.8000 .0312 0.0800 .0031
                                                            Ceníková cena:
                                                            $17,77 /každý.
                                                            Vaše cena::
                                                            3577951 BDMT170408ERMS BDMT170408ERMS TN6430 2 17.0000 .6690 9.6000 .3780 4.9020 .1930 1.8800 .0740 0.8000 .0312 0.0800 .0031
                                                              Ceníková cena:
                                                              $17,77 /každý.
                                                              Vaše cena::
                                                              Ceníková cena:
                                                              Sleva: %
                                                              Vaše cena::
                                                              Výměna Tato položka není k dispozici
                                                              Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                                              PŮVODNÍ PRODUKT

                                                              90° rohové frézy • Řada M6800

                                                              Břitové destičky M6800S
                                                              (8 Products)
                                                              Informace o produktech
                                                              SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [W] Insert Width [W] Insert Width [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                              3577965 BDMT070302ERMS BDMT070302ERMS TN6430 2 7.0000 .2760 4.5400 .1787 2.6000 .1024 1.2800 .0504 0.2000 .0079 0.0600 .0024
                                                                Ceníková cena:
                                                                $13,71 /každý.
                                                                Vaše cena::
                                                                3577966 BDMT070302ERMS BDMT070302ERMS TN6425 2 7.0000 .2760 4.5400 .1787 2.6000 .1024 1.2800 .0504 0.2000 .0079 0.0600 .0024
                                                                  Ceníková cena:
                                                                  $13,71 /každý.
                                                                  Vaše cena::
                                                                  3577967 BDMT070302ERMS BDMT070302ERMS TN6405 2 7.0000 .2760 4.5400 .1787 2.6000 .1024 1.2800 .0504 0.2000 .0079 0.0600 .0024
                                                                    Ceníková cena:
                                                                    $13,71 /každý.
                                                                    Vaše cena::
                                                                    3577968 BDMT070304ERMS BDMT070304ERMS TN6430 2 7.0000 .2760 4.5500 .1791 2.6000 .1024 1.0900 .0429 0.4000 .0156 0.0600 .0024
                                                                      Ceníková cena:
                                                                      $13,71 /každý.
                                                                      Vaše cena::
                                                                      3577969 BDMT070304ERMS BDMT070304ERMS TN6425 2 7.0000 .2760 4.5500 .1791 2.6000 .1024 1.0900 .0429 0.4000 .0156 0.0600 .0024
                                                                        Ceníková cena:
                                                                        $13,71 /každý.
                                                                        Vaše cena::
                                                                        3577970 BDMT070304ERMS BDMT070304ERMS TN6405 2 7.0000 .2760 4.5500 .1791 2.6000 .1024 1.0900 .0429 0.4000 .0156 0.0600 .0024
                                                                          Ceníková cena:
                                                                          $13,71 /každý.
                                                                          Vaše cena::
                                                                          Ceníková cena:
                                                                          Sleva: %
                                                                          Vaše cena::
                                                                          Výměna Tato položka není k dispozici
                                                                          Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                                                          PŮVODNÍ PRODUKT

                                                                          90° rohové frézy • Řada M6800

                                                                          Břitové destičky M6800M
                                                                          (9 Products)
                                                                          Informace o produktech
                                                                          SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [W] Insert Width [W] Insert Width [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                                          3577932 BDMT11T304ERML BDMT11T304ERML TN6405 2 11.0000 .4330 6.6600 .2622 3.8100 .1500 1.7900 .0705 0.4000 .0156 0.1000 .0039
                                                                            Ceníková cena:
                                                                            $15,21 /každý.
                                                                            Vaše cena::
                                                                            3577933 BDMT11T304ERML BDMT11T304ERML TN6430 2 11.0000 .4330 6.6600 .2622 3.8100 .1500 1.7900 .0705 0.4000 .0156 0.1000 .0039
                                                                              Ceníková cena:
                                                                              $15,21 /každý.
                                                                              Vaše cena::
                                                                              3577936 BDMT11T308ERML BDMT11T308ERML TN6405 2 11.0000 .4330 6.6700 .2626 3.8100 .1500 1.4000 .0551 0.8000 .0312 0.1000 .0039
                                                                                Ceníková cena:
                                                                                $15,21 /každý.
                                                                                Vaše cena::
                                                                                3577937 BDMT11T308ERML BDMT11T308ERML TN6430 2 11.0000 .4330 6.6700 .2626 3.8100 .1500 1.4000 .0551 0.8000 .0312 0.1000 .0039
                                                                                  Ceníková cena:
                                                                                  $15,21 /každý.
                                                                                  Vaše cena::
                                                                                  3577938 BDMT11T312ERML BDMT11T312ERML TN6405 2 11.0000 .4330 6.6900 .2634 3.8100 .1500 1.0100 .0398 1.2000 .0468 0.1000 .0039
                                                                                    Ceníková cena:
                                                                                    $15,21 /každý.
                                                                                    Vaše cena::
                                                                                    3577939 BDMT11T312ERML BDMT11T312ERML TN6430 2 11.0000 .4330 6.6900 .2634 3.8100 .1500 1.0100 .0398 1.2000 .0468 0.1000 .0039
                                                                                      Ceníková cena:
                                                                                      $15,21 /každý.
                                                                                      Vaše cena::
                                                                                      Ceníková cena:
                                                                                      Sleva: %
                                                                                      Vaše cena::
                                                                                      Výměna Tato položka není k dispozici
                                                                                      Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                                                                      PŮVODNÍ PRODUKT

                                                                                      90° Shoulder Mills • M6800 Series

                                                                                      M6800S Inserts
                                                                                      (8 Products)
                                                                                      Informace o produktech
                                                                                      SAP Material Number ISO Catalog Number ANSI Catalog Number Grade Cutting Edges per Insert [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [W] Insert Width [W] Insert Width [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
                                                                                      3577962 BDMT070302ERML BDMT070302ERML TN6430 2 7.0000 .2760 4.5400 .1787 2.6000 .1024 1.2800 .0504 0.2000