successfully added to cart
View Cart

Tool Bodies

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Select First Choice
  • CN (31)
  • DE (39)
  • GB (8)
  • IN (5)
  • US (19)
Applications
  • Face Milling Face Milling (77)
  • Pocket Pocket (76)
  • Pocket Helical Pocket Helical (76)
  • Pocket Milling Pocket Milling (76)
  • Profile Milling Profile Milling (14)
  • Ramping Ramping (76)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (4)
  • Shoulder Milling Shoulder Milling (77)
  • Shoulder Roughing Shoulder Roughing (76)
  • Shoulder Square End Shoulder Square End (76)
  • Slot Milling Slot Milling (50)
  • Slot Square End Slot Square End (51)
Workpiece Material
  • P Steel (87)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (87)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (87)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (87)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (87)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (87)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (87)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (87)
  • M Stainless Steel (87)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (87)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (87)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (87)
  • K Cast Iron (87)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (87)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (87)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (87)
  • N Non-Ferrous Materials (87)
    • N1
      Wrought Aluminum
      (87)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (87)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (87)
  • S High-Temp Alloys (87)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (87)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (87)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (87)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (87)
  • H Hardened Materials (87)
    • H1
      Hardened Materials 44-48 HRC
      (87)
Cutting Diameter
  • 12.0 (2)
  • 12.7 (1)
  • 15.88 (2)
  • 16.0 (6)
  • 18.0 (3)
  • 19.05 (7)
  • 20.0 (8)
  • 22.0 (3)
  • 25.0 (8)
  • 25.4 (10)
  • 30.0 (1)
  • 31.75 (5)
  • 32.0 (9)
  • 38.1 (4)
  • 40.0 (3)
  • 50.0 (2)
  • 50.8 (4)
  • 63.0 (2)
  • 63.5 (2)
  • 76.2 (1)
  • 80.0 (1)
  • 100.0 (1)
  • 101.6 (1)
  • 125.0 (1)
to
Cutting Diameter
  • 0.47 (2)
  • 0.5 (1)
  • 0.62 (5)
  • 0.625 (2)
  • 0.63 (1)
  • 0.7 (3)
  • 0.75 (7)
  • 0.78 (8)
  • 0.86 (3)
  • 0.98 (8)
  • 1.0 (10)
  • 1.18 (1)
  • 1.25 (14)
  • 1.5 (4)
  • 1.57 (1)
  • 1.575 (2)
  • 1.969 (2)
  • 2.0 (4)
  • 2.48 (2)
  • 2.5 (2)
  • 3.0 (1)
  • 3.15 (1)
  • 3.937 (1)
  • 4.0 (1)
  • 4.921 (1)
to
Cutting Length
  • 0.446 (13)
  • 0.448 (3)
  • 0.449 (3)
  • 0.4506 (2)
  • 0.451 (13)
  • 0.453 (16)
  • 0.4534 (1)
  • 0.4539 (1)
  • 0.454 (10)
  • 0.4549 (1)
  • 0.455 (14)
  • 0.456 (3)
  • 0.461 (3)
  • 1.654 (1)
  • 1.7 (1)
  • 2.032 (2)
to
Cutting Length
  • 11.32 (13)
  • 11.38 (3)
  • 11.4 (3)
  • 11.44 (12)
  • 11.444 (2)
  • 11.46 (1)
  • 11.516 (1)
  • 11.52 (16)
  • 11.528 (1)
  • 11.53 (10)
  • 11.55 (14)
  • 11.554 (1)
  • 11.57 (3)
  • 11.71 (3)
  • 42.02 (1)
  • 43.1 (1)
  • 51.62 (2)
to
Reach
  • 20.32 (1)
  • 21.0 (4)
  • 21.44 (1)
  • 25.0 (4)
  • 25.4 (1)
  • 27.94 (3)
  • 28.0 (1)
  • 29.72 (2)
  • 30.0 (5)
  • 30.99 (3)
  • 31.0 (10)
  • 31.75 (3)
  • 32.0 (1)
  • 32.55 (1)
  • 33.0 (2)
  • 38.1 (2)
  • 39.0 (3)
  • 40.0 (3)
  • 40.64 (1)
  • 40.89 (2)
  • 41.0 (5)
  • 43.69 (2)
  • 50.0 (2)
  • 53.34 (2)
  • 57.14 (1)
  • 63.75 (1)
  • 65.0 (1)
to
Reach
  • 0.8 (1)
  • 0.827 (3)
  • 0.8386 (1)
  • 0.844 (1)
  • 0.984 (4)
  • 1.0 (1)
  • 1.1 (3)
  • 1.102 (1)
  • 1.17 (2)
  • 1.181 (4)
  • 1.1811 (1)
  • 1.22 (11)
  • 1.2205 (1)
  • 1.221 (1)
  • 1.25 (3)
  • 1.26 (1)
  • 1.282 (1)
  • 1.299 (2)
  • 1.5 (2)
  • 1.535 (2)
  • 1.5354 (1)
  • 1.5748 (1)
  • 1.575 (2)
  • 1.6 (1)
  • 1.61 (2)
  • 1.614 (5)
  • 1.72 (2)
  • 1.969 (2)
  • 2.1 (2)
  • 2.25 (1)
  • 2.51 (1)
  • 2.559 (1)
to
Connection Style
  • A-Socket Head Cap Screw (20)
  • Screw-On Connection (9)
  • Straight-Cylindrical (33)
  • Weldon (25)
Cutting Edges Per Insert
  • 1.0 (87)
  • 2.0 (87)
to
cornerConfiguration
Corner Radius
  • 0.2 (87)
  • 0.39 (87)
  • 0.4 (87)
  • 0.78 (87)
  • 0.79 (87)
  • 0.8 (87)
  • 1.2 (87)
  • 1.59 (87)
  • 1.6 (87)
  • 2.0 (87)
  • 2.4 (87)
  • 3.1 (87)
  • 3.2 (87)
to
Corner Radius
  • 0.008 (87)
  • 0.015 (87)
  • 0.016 (87)
  • 0.031 (87)
  • 0.0313 (87)
  • 0.047 (87)
  • 0.062 (87)
  • 0.0625 (87)
  • 0.063 (87)
  • 0.078 (87)
  • 0.094 (87)
  • 0.095 (87)
  • 0.122 (87)
  • 0.125 (87)
to
application
Grade Of Cutting Tool
  • WDN10U (87)
  • WK15CM (87)
  • WK15PM (87)
  • WN10HM (87)
  • WN25PM (87)
  • WP25PM (87)
  • WP35CM (87)
  • WP40PM (87)
  • WS30PM (87)
  • WS40PM (87)
  • WU20PM (87)
  • WU35PM (87)
Maximum Ramp Angle
  • 0.7 (1)
  • 0.9 (2)
  • 1.1 (1)
  • 1.2 (1)
  • 1.5 (4)
  • 1.8 (2)
  • 1.9 (5)
  • 2.5 (1)
  • 2.6 (3)
  • 2.8 (2)
  • 3.2 (1)
  • 3.6 (13)
  • 3.7 (2)
  • 4.2 (1)
  • 4.4 (1)
  • 5.1 (9)
  • 5.3 (8)
  • 6.6 (1)
  • 7.8 (8)
  • 8.6 (7)
  • 9.7 (1)
  • 10.0 (5)
  • 12.5 (2)
to
frontEnd
Center Cutting
backEnd
Connection Type
  • CYLINDRICAL (58)
  • SCREW-ON (9)
  • SHELL MILL (20)
Back-End Diameter
  • 0.47 (1)
  • 0.4724 (1)
  • 0.512 (1)
  • 0.625 (3)
  • 0.6299 (1)
  • 0.63 (10)
  • 0.71 (2)
  • 0.75 (15)
  • 0.7874 (1)
  • 0.79 (9)
  • 0.827 (2)
  • 0.87 (4)
  • 0.98 (8)
  • 0.9843 (2)
  • 1.0 (10)
  • 1.06 (1)
  • 1.14 (1)
  • 1.142 (3)
  • 1.25 (4)
  • 1.26 (6)
  • 1.5 (1)
  • 1.58 (1)
to
Back-End Diameter
  • 12.0 (2)
  • 13.0 (1)
  • 15.87 (3)
  • 16.0 (11)
  • 18.0 (2)
  • 19.0 (7)
  • 19.04 (1)
  • 19.05 (6)
  • 19.06 (1)
  • 20.0 (10)
  • 21.0 (2)
  • 22.0 (4)
  • 25.0 (10)
  • 25.39 (1)
  • 25.4 (8)
  • 25.41 (1)
  • 27.0 (1)
  • 29.0 (4)
  • 31.7 (4)
  • 32.0 (6)
  • 38.1 (1)
  • 40.0 (1)
to
other
Tool Unit
  • I (37)
  • M (50)
Over All Length [L]
  • 40.0 (12)
  • 42.7 (1)
  • 44.45 (1)
  • 47.94 (1)
  • 48.0 (1)
  • 50.0 (2)
  • 50.8 (1)
  • 53.75 (1)
  • 54.0 (1)
  • 62.6 (2)
  • 63.0 (1)
  • 63.51 (1)
  • 64.5 (2)
  • 67.0 (1)
  • 69.85 (1)
  • 70.0 (3)
  • 76.2 (2)
  • 79.0 (1)
  • 81.0 (3)
  • 81.28 (2)
  • 82.0 (1)
  • 82.55 (1)
  • 88.0 (3)
  • 88.9 (2)
  • 96.0 (2)
  • 100.0 (6)
  • 101.6 (4)
  • 110.0 (3)
  • 114.3 (2)
  • 115.06 (1)
  • 120.0 (2)
  • 121.92 (3)
  • 130.0 (3)
  • 132.08 (1)
  • 170.0 (5)
  • 170.18 (2)
  • 203.2 (2)
  • 210.0 (2)
  • 248.92 (1)
  • 250.0 (1)
to
Over All Length [L]
  • 1.575 (12)
  • 1.681 (1)
  • 1.75 (1)
  • 1.887 (1)
  • 1.89 (1)
  • 1.969 (2)
  • 2.0 (1)
  • 2.116 (1)
  • 2.126 (1)
  • 2.465 (2)
  • 2.48 (1)
  • 2.5 (1)
  • 2.539 (2)
  • 2.6378 (1)
  • 2.75 (1)
  • 2.756 (3)
  • 3.0 (2)
  • 3.1102 (1)
  • 3.189 (3)
  • 3.2 (2)
  • 3.2283 (1)
  • 3.25 (1)
  • 3.397 (2)
  • 3.465 (3)
  • 3.5 (2)
  • 3.7795 (2)
  • 3.937 (4)
  • 4.0 (4)
  • 4.331 (3)
  • 4.5 (2)
  • 4.53 (1)
  • 4.724 (2)
  • 4.8 (3)
  • 5.118 (3)
  • 5.2 (1)
  • 6.693 (5)
  • 6.7 (2)
  • 8.0 (2)
  • 8.268 (2)
  • 9.8 (1)
  • 9.843 (1)
to
Head Length [L2]
  • 20.32 (1)
  • 21.0 (4)
  • 21.44 (1)
  • 25.0 (4)
  • 25.4 (1)
  • 27.94 (3)
  • 28.0 (1)
  • 29.72 (2)
  • 30.0 (5)
  • 30.99 (3)
  • 31.0 (10)
  • 31.75 (3)
  • 32.0 (1)
  • 32.55 (1)
  • 33.0 (2)
  • 38.1 (2)
  • 39.0 (3)
  • 40.0 (3)
  • 40.64 (1)
  • 40.89 (2)
  • 41.0 (5)
  • 43.69 (2)
  • 50.0 (2)
  • 53.34 (2)
  • 57.14 (1)
  • 63.75 (1)
  • 65.0 (1)
to
Head Length [L2]
  • 0.8 (1)
  • 0.827 (3)
  • 0.8386 (1)
  • 0.844 (1)
  • 0.984 (4)
  • 1.0 (1)
  • 1.1 (3)
  • 1.102 (1)
  • 1.17 (2)
  • 1.181 (4)
  • 1.1811 (1)
  • 1.22 (11)
  • 1.2205 (1)
  • 1.221 (1)
  • 1.25 (3)
  • 1.26 (1)
  • 1.282 (1)
  • 1.299 (2)
  • 1.5 (2)
  • 1.535 (2)
  • 1.5354 (1)
  • 1.5748 (1)
  • 1.575 (2)
  • 1.6 (1)
  • 1.61 (2)
  • 1.614 (5)
  • 1.72 (2)
  • 1.969 (2)
  • 2.1 (2)
  • 2.25 (1)
  • 2.51 (1)
  • 2.559 (1)
to
Number of Inserts
  • 1.0 (3)
  • 2.0 (17)
  • 3.0 (25)
  • 4.0 (16)
  • 5.0 (7)
  • 6.0 (6)
  • 8.0 (5)
  • 9.0 (4)
  • 11.0 (1)
  • 20.0 (2)
  • 30.0 (1)
to
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

Rohové frézy 0°/90° • VSM11™

Frézy se závitovou stopkou • Metrické
(5 Products)
  • Face MillingFace Milling
  • Helical MillingHelical Milling
  • Ramping: BlankRamping: Blank
  • Slotting: Square EndSlotting: Square End
  • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
  • PocketingPocketing
  • Shank - Screw-OnShank - Screw-On
  • Milling - Through CoolantMilling - Through Coolant
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
5417011 VSM11D016Z02M08XD11 VSM11D016Z02M08XD11   16.0000 .6200 13.0 .512 8.5000 .3300 M8 25.0000 .9840 10.0000 .3900 11.5300 .4540 2 10.000 41400 Y 0.02
    List price:
    $186.67 /each.
    Your price::
    Qty
    5417015 VSM11D025Z04M12XD11 VSM11D025Z04M12XD11   25.0000 .9800 21.0 .827 12.5000 .4900 M12 32.0000 1.260 17.0000 .6700 11.5200 .4530 4 5.300 30200 Y 0.08
      List price:
      $245.33 /each.
      Your price::
      Qty
      5417013 VSM11D020Z03M10XD11 VSM11D020Z03M10XD11   20.0000 .7800 18.0 .71 10.5000 .4100 M10 28.0000 1.102 15.0000 .5900 11.5500 .4550 3 7.800 35100 Y 0.05
        List price:
        $218.66 /each.
        Your price::
        Qty
        5417017 VSM11D032Z04M16XD11 VSM11D032Z04M16XD11   32.0000 1.250 29.0 1.142 17.0000 .6700 M16 40.0000 1.575 24.0000 .9400 11.4400 .4510 4 3.600 25800 Y 0.18
          List price:
          $255.99 /each.
          Your price::
          Qty
          5417019 VSM11D040Z06M16XD11 VSM11D040Z06M16XD11   40.0000 1.570 29.0 1.142 17.0000 .6700 M16 40.0000 1.575 24.0000 .9400 11.3800 .4480 6 2.600 22600 Y 0.24
            List price:
            $314.67 /each.
            Your price::
            Qty
            List price:
            Discount: %
            Your price::
            Replacement This item is not available
            Replacement Product This item may be available through a distributor
            Qty

            Sold in pkg. of

            ORIGINAL PRODUCT

            Rohové frézy Victory™ • Řada VSM11

            Válcové stopkové frézy
            (13 Products)
            • Face MillingFace Milling
            • Helical MillingHelical Milling
            • Ramping: BlankRamping: Blank
            • Slotting: Square EndSlotting: Square End
            • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
            • PocketingPocketing
            • Shank - Cylindrical  PlainShank - Cylindrical Plain
            • Milling - Through CoolantMilling - Through Coolant
            View Products
            SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Pounds
            5416729 VSM11D100Z04C100XD11L800 VSM11D100Z04C100XD11L800   25.4000 1.000 25.4 1.0 203.2000 8.000 53.3400 2.100 11.5200 .4530 4 5.100 29900 Y 1.56
              List price:
              $266.67 /each.
              Your price::
              Qty
              5416489 VSM11D100Z03C100XD11L480 VSM11D100Z03C100XD11L480   25.4000 1.000 25.4 1.0 121.9200 4.800 31.7500 1.250 11.5200 .4530 3 5.100 29900 Y 0.90
                List price:
                $255.99 /each.
                Your price::
                Qty
                5416486 VSM11D062Z02C062XD11L400 VSM11D062Z02C062XD11L400   15.8800 .6250 15.87 .625 101.6000 4.000 25.4000 1.000 11.5300 .4540 2 12.500 41700 Y 0.28
                  List price:
                  $229.34 /each.
                  Your price::
                  Qty
                  5416520 VSM11D100Z04C100XD11L480 VSM11D100Z04C100XD11L480   25.4000 1.000 25.4 1.0 121.9200 4.800 31.7500 1.250 11.5200 .4530 4 5.100 29900 Y 0.92
                    List price:
                    $261.33 /each.
                    Your price::
                    Qty
                    5416487 VSM11D075Z02C075XD11L450 VSM11D075Z02C075XD11L450   19.0500 .7500 19.0 .75 114.3000 4.500 27.9400 1.100 11.5500 .4550 2 8.600 36300 Y 0.46
                      List price:
                      $240.00 /each.
                      Your price::
                      Qty
                      5416727 VSM11D075Z03C075XD11L670 VSM11D075Z03C075XD11L670   19.0500 .7500 19.0 .75 170.1800 6.700 40.8900 1.610 11.5500 .4550 3 8.600 36300 Y 0.70
                        List price:
                        $255.99 /each.
                        Your price::
                        Qty
                        List price:
                        Discount: %
                        Your price::
                        Replacement This item is not available
                        Replacement Product This item may be available through a distributor
                        Qty

                        Sold in pkg. of

                        ORIGINAL PRODUCT

                        Rohové frézy 0°/90° • VSM11™

                        Stopkové frézy s válcovou stopkou (standardní a dlouhá provedení) • Metrické
                        (20 Products)
                        • Face MillingFace Milling
                        • Helical MillingHelical Milling
                        • Ramping: BlankRamping: Blank
                        • Slotting: Square EndSlotting: Square End
                        • Side Milling/Shoulder Milling: Square EndSide Milling/Shoulder Milling: Square End
                        • PocketingPocketing
                        • Milling - Through CoolantMilling - Through Coolant
                        • Shank - Cylindrical  PlainShank - Cylindrical Plain
                        View Products
                        SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
                        5416638 VSM11D032Z03A32XD11L130 VSM11D032Z03A32XD11L130   32.0000 1.250 32.0 1.26 130.0000 5.118 41.0000 1.614 11.4400 .4510 3 3.600 25800 Y 0.70
                          List price:
                          $272.00 /each.
                          Your price::
                          Qty
                          5416635 VSM11D020Z03A20XD11L110 VSM11D020Z03A20XD11L110   20.0000 .7800 20.0 .79 110.0000 4.331 31.0000