RD08
Filtry
Filtry
Zobrazit filtry v
MetrickéPalcové
Workpiece Material
Workpiece Material
- P Steel (4)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(4)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(4)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(4)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(4)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(4)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(4)
- M Stainless Steel (4)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(4)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(4)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(4)
- K Cast Iron (4)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(4)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(4)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(4)
- N Non-Ferrous Materials (4)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(4)
- N1Wrought Aluminum (4)
- N3High-Silicon Aluminum Alloys Si >12.2%(4)
- S High-Temp Alloys (4)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(4)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4)
Select All Star
- US (1)
Applications
Applications
Face Milling (4)
Pocket (4)
Pocket Helical (4)
Pocket Milling (4)
Profile Milling (4)
Ramping (4)
Shoulder Ball Nose (4)
Shoulder Milling (4)
Slot Milling (4)
Slot Square End (4)
Cutting Diameter
Cutting Diameter
- 0.315 in(3)
- 0.435 in(1)
komu
Cutting Diameter
Cutting Diameter
- 8.0 mm(3)
- 11.049 mm(1)
komu
Maximum Cutting Diameter
Maximum Cutting Diameter
- 16.0 mm(3)
- 19.05 mm(1)
komu
Maximum Cutting Diameter
Maximum Cutting Diameter
- 0.6299 in(3)
- 0.75 in(1)
komu
Reach
Reach
- 1.5748 in(1)
- 2.4 in(1)
- 3.1496 in(1)
- 4.9213 in(1)
komu
Reach
Reach
- 40.0 mm(1)
- 60.96 mm(1)
- 80.0 mm(1)
- 125.0 mm(1)
komu
Over All Length [L]
Over All Length [L]
- 3.5433 in(1)
- 4.53 in(1)
- 5.1969 in(1)
- 7.2047 in(1)
komu
Over All Length [L]
Over All Length [L]
- 90.0 mm(1)
- 115.062 mm(1)
- 132.0 mm(1)
- 183.0 mm(1)
komu
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- THM (4)
- TN6540 (4)
- WP35CM (4)
Maximum Ramp Angle
Maximum Ramp Angle
- 7.5 (3)
- 22.0 (1)
komu
backEnd
Back-End Diameter
Back-End Diameter
- 16.0 mm(1)
- 19.05 mm(1)
- 20.0 mm(1)
- 25.0 mm(1)
komu
Back-End Diameter
Back-End Diameter
- 0.6299 in(1)
- 0.75 in(1)
- 0.7874 in(1)
- 0.9843 in(1)
komu
No filters matching ""