Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

M270 Ball Nose

Vybrat filtry
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (58)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (58)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (58)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (58)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (47)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (47)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (47)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (47)
  • M Stainless Steel (47)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (47)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (47)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (47)
  • K Cast Iron (64)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (64)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (64)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (64)
  • N Non-Ferrous Materials (31)
    • N1
      Wrought Aluminum (31)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (31)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (31)
  • S High-Temp Alloys (43)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (32)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (32)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (32)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (43)
  • H Hardened Materials (48)
    • H1
      Hardened Materials 44-48 HRC (48)
    • H2
      Hardened Materials 48-55 HRC (42)
    • H3
      Hardened Materials 56-60 HRC (42)
Select All Star
  • US (1)
Applications
Applications
  • Pocket Pocket (31)
  • Pocket Milling Pocket Milling (31)
  • Profile Milling Profile Milling (31)
  • Ramping Ramping (31)
  • Shoulder Ball Nose Shoulder Ball Nose (31)
  • Shoulder Milling Shoulder Milling (31)
  • Slot Ball Nose Slot Ball Nose (31)
  • Slot Milling Slot Milling (31)
Cutting Diameter
Cutting Diameter
  • 0.375 in (2)
  • 0.394 in (4)
  • 0.473 in (4)
  • 0.5 in (2)
  • 0.625 in (2)
  • 0.63 in (4)
  • 0.75 in (2)
  • 0.787 in (4)
  • 0.984 in (3)
  • 1.0 in (1)
  • 1.26 in (3)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 9.525 mm (2)
  • 10.0 mm (4)
  • 12.0 mm (4)
  • 12.701 mm (2)
  • 15.875 mm (2)
  • 16.0 mm (4)
  • 19.05 mm (2)
  • 20.0 mm (4)
  • 25.0 mm (3)
  • 25.401 mm (1)
  • 32.0 mm (3)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Length
Cutting Length
  • 5.0 mm (3)
  • 6.0 mm (3)
  • 8.0 mm (3)
  • 10.0 mm (3)
  • 12.5 mm (3)
  • 16.0 mm (3)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 0.197 in (3)
  • 0.237 in (3)
  • 0.315 in (3)
  • 0.394 in (3)
  • 0.492 in (3)
  • 0.63 in (3)
Cutting Length Min komu Cutting Length Max
Reach
Reach
  • 0.591 in (2)
  • 1.181 in (1)
  • 1.575 in (1)
  • 1.693 in (2)
  • 1.772 in (1)
  • 1.8 in (2)
  • 1.891 in (2)
  • 1.969 in (3)
  • 2.0 in (2)
  • 2.165 in (1)
  • 2.244 in (2)
  • 2.301 in (2)
  • 2.677 in (2)
  • 2.757 in (1)
  • 2.801 in (2)
  • 3.426 in (2)
  • 3.5 in (1)
  • 3.661 in (2)
Reach Min komu Reach Max
Reach
Reach
  • 15.0 mm (2)
  • 30.0 mm (1)
  • 40.0 mm (1)
  • 43.0 mm (2)
  • 45.0 mm (1)
  • 45.725 mm (2)
  • 48.0 mm (2)
  • 50.0 mm (3)
  • 50.801 mm (2)
  • 55.0 mm (1)
  • 57.0 mm (2)
  • 58.426 mm (2)
  • 68.0 mm (2)
  • 70.0 mm (1)
  • 71.125 mm (2)
  • 87.0 mm (2)
  • 88.9 mm (1)
  • 93.0 mm (2)
Reach Min komu Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 90.0 (31)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • Screw-On Connection (6)
  • Straight-Cylindrical (19)
  • Weldon (6)
Number of Flutes
Number of Flutes
  • 2 (31)
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
  • 1.655 in (2)
  • 1.85 in (1)
  • 2.323 in (1)
  • 2.835 in (1)
  • 2.874 in (1)
  • 3.543 in (1)
  • 3.74 in (1)
  • 4.134 in (1)
  • 4.724 in (1)
  • 5.513 in (2)
  • 5.55 in (2)
  • 5.71 in (3)
  • 5.75 in (2)
  • 6.0 in (2)
  • 6.102 in (3)
  • 6.694 in (2)
  • 7.0 in (2)
  • 7.678 in (1)
  • 8.0 in (1)
  • 8.071 in (1)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 42.0 mm (2)
  • 47.0 mm (1)
  • 59.0 mm (1)
  • 72.0 mm (1)
  • 73.0 mm (1)
  • 90.0 mm (1)
  • 95.0 mm (1)
  • 105.0 mm (1)
  • 120.0 mm (1)
  • 140.0 mm (2)
  • 140.975 mm (2)
  • 145.0 mm (3)
  • 146.05 mm (2)
  • 152.4 mm (2)
  • 155.0 mm (3)
  • 170.0 mm (2)
  • 177.8 mm (2)
  • 195.0 mm (1)
  • 203.201 mm (1)
  • 205.0 mm (1)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.187 in (7)
  • 0.197 in (9)
  • 0.237 in (11)
  • 0.25 in (8)
  • 0.313 in (7)
  • 0.315 in (11)
  • 0.375 in (9)
  • 0.394 in (11)
  • 0.492 in (7)
  • 0.5 in (6)
  • 0.63 in (6)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 4.75 mm (7)
  • 5.0 mm (9)
  • 6.0 mm (11)
  • 6.351 mm (8)
  • 7.95 mm (7)
  • 8.0 mm (11)
  • 9.525 mm (9)
  • 10.0 mm (11)
  • 12.5 mm (7)
  • 12.701 mm (6)
  • 16.0 mm (6)
Corner Radius Min komu Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • THM (31)
  • TN2505 (42)
  • TN2510 (31)
  • TN6525 (32)
  • TN6540 (32)
  • TN7525 (31)
  • TN7535 (31)
  • TTI25 (31)
  • TTM (31)
  • TTM08 (16)
  • TTM09 (28)
  • WP35CM (39)
  • WU10PM (37)
Hand Of Tool
Hand Of Tool
  • R (31)
Wiper Insert
Wiper Insert
  • N (33)
frontEnd
Cutting Width
Cutting Width
  • 0.375 in (1)
  • 0.394 in (3)
  • 0.473 in (5)
  • 0.5 in (2)
  • 0.625 in (1)
  • 0.63 in (5)
  • 0.75 in (3)
  • 0.787 in (5)
  • 0.984 in (3)
  • 1.0 in (2)
  • 1.26 in (3)
Cutting Width Min komu Cutting Width Max
Cutting Width
Cutting Width
  • 9.525 mm (1)
  • 10.0 mm (3)
  • 12.0 mm (5)
  • 12.701 mm (2)
  • 15.875 mm (1)
  • 16.0 mm (5)
  • 19.05 mm (3)
  • 20.0 mm (5)
  • 25.0 mm (3)
  • 25.401 mm (2)
  • 32.0 mm (3)
Cutting Width Min komu Cutting Width Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • DMB-BALL NOSE (33)
Cutting Tool Material
Cutting Tool Material
  • H W (33)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (25)
  • SCREW-ON (6)
Back-End Diameter
Back-End Diameter
  • 12.0 mm (6)
  • 12.701 mm (4)
  • 13.0 mm (3)
  • 15.875 mm (2)
  • 16.0 mm (3)
  • 17.0 mm (1)
  • 19.05 mm (2)
  • 20.0 mm (3)
  • 21.0 mm (1)
  • 25.0 mm (2)
  • 25.401 mm (1)
  • 27.5 mm (1)
  • 32.0 mm (2)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.473 in (6)
  • 0.5 in (4)
  • 0.512 in (3)
  • 0.625 in (2)
  • 0.63 in (3)
  • 0.669 in (1)
  • 0.75 in (2)
  • 0.787 in (3)
  • 0.828 in (1)
  • 0.984 in (2)
  • 1.0 in (1)
  • 1.083 in (1)
  • 1.26 in (2)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""

Těla nástrojů

(31) Těla nástrojů

Břitové destičky

(33) Břitové destičky
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

 

Can’t find the file type you’re looking for?

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku
Zobrazit košík

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

Děkujeme za úspěšnou registraci. Nyní máte okamžitý přístup k přihlášení a můžete stránky používat.

You are about to leave the Solution building process.

Are you sure you want to leave?