Český
No Items in Cart
COVID-19: Jaké jsou reakce firmy WIDIA

M1200 (45°)

Select Filters
FiltersX
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
  • P Steel (49)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (41)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (41)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (41)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (41)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (41)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (49)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (49)
  • M Stainless Steel (49)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (49)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (49)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (49)
  • K Cast Iron (52)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (52)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (51)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (51)
  • N Non-Ferrous Materials (10)
    • N1
      Wrought Aluminum
      (10)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (10)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (10)
  • S High-Temp Alloys (38)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (32)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (32)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (32)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (38)
  • H Hardened Materials (9)
    • H1
      Hardened Materials 44-48 HRC
      (9)
firstChoiceCountry
.product.facets.selectFirstChoice
  • DE (49)
  • US (40)
  • IN (9)
Applications
  • ID Thread Turning (70)
  • Face Milling (49)
Cutting Diameter
to
Cutting Diameter
to
Maximum Cutting Diameter
to
Maximum Cutting Diameter
to
Cutting Length
to
Cutting Length
to
Reach
to
Reach
to
Tool Cutting Edge Angle
to
Connection Style
  • A-Socket Head Cap Screw (20)
  • B-Cutter Retention Screw (14)
  • C-Bolt Circle (9)
  • KL Screw (2)
  • SHCS or RetScrw Or BoltCircle (2)
  • Weldon (2)
Number of Flutes
  • 6 (7)
  • 4 (6)
  • 8 (5)
  • 16 (4)
  • 5 (4)
  • 10 (3)
  • 11 (3)
  • 12 (3)
  • 14 (3)
  • 9 (3)
  • 20 (2)
  • 24 (2)
  • 3 (2)
  • 7 (2)
Cutting Edges Per Insert
to
Internal Coolant Capability
cornerConfiguration
Corner Radius
to
Corner Radius
to
application
Grade Of Cutting Tool
  • TN6520 (8)
  • TN6525 (8)
  • TN6540 (8)
  • WS40PM (8)
  • WP25PM (7)
  • WP40PM (7)
  • WP35CM (6)
  • TN5515 (5)
  • WK15CM (4)
  • TN7535 (3)
  • WS30PM (2)
  • THM-U (1)
  • TN6501 (1)
  • TN6510 (1)
  • WK25YM (1)
Hand Of Tool
  • R (49)
Wiper Insert
  • N (58)
  • Y (12)
frontEnd
Insert Shape
  • H-HEXAGON 120 (70)
Neck Diameter
to
Neck Diameter
to
Center Cutting
insertGeometry
Shape
  • H-HEXAGON 120 (70)
Insert IC Size
to
Insert IC Size
to
Cutting Edge Length
to
Cutting Edge Length
to
Chip Breaker CBMD
  • GD (29)
  • HD (28)
  • LD (12)
Cutting Tool Material
  • H W (69)
  • C N (1)
Tolerance Class
  • G (43)
  • P (26)
  • E (1)
backEnd
Connection Type
  • SHELL MILL (47)
  • CYLINDRICAL (2)
Back-End Diameter
to
Back-End Diameter
to
other
Grade
  • TN6520 (8)
  • TN6525 (8)
  • TN6540 (8)
  • WS40PM (8)
  • WP25PM (7)
  • WP40PM (7)
  • WP35CM (6)
  • TN5515 (5)
  • WK15CM (4)
  • TN7535 (3)
  • WS30PM (2)
  • THM-U (1)
  • TN6501 (1)
  • TN6510 (1)
  • WK25YM (1)
marketingPlatformWIDIA
  • M1200 Series (109)
Tool Unit
  • I (96)
  • M (93)
Insert Hand
  • N (62)
Number of Inserts
to
Over All Length [L]
to
Over All Length [L]
to
Head Length [L2]
to
Head Length [L2]
to
No filters matching ""
View Products in
Metric
Inch
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
5910033 HNEC0905ANSN HNEC535ANSN   WK25YM 12 15.8800 .6250 9.1700 .3610 5.5560 .2188 1.9500 .0770 1.2000 .0470 0.1900 .0075
Face Mills • M1200

15°/75° • 45°• 30°/60° Inserts • HNGJ-HD
(12 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
6180292 HNGJ090543ANSNHD HNGJ53511ANSNHD   WS40PM 12 15.8800 .6250 8.4950 .3340 5.4400 .2140     4.3500 .1710 0.2000 .0079
3563901 HNGJ0905ANSNHD HNGJ535ANSNHD   TN6525 12 15.8800 .6252 8.5930 .3383 5.4630 .2151 1.6550 .0651 1.2000 .0472 0.1700 .0069
3563902 HNGJ0905ANSNHD HNGJ535ANSNHD   TN6540 12 15.8800 .6252 8.5930 .3383 5.4630 .2151 1.6550 .0651 1.2000 .0472 0.1700 .0069
5895373 HNGJ0905ANSNHD HNGJ535ANSNHD   WP40PM 12 15.8800 .6252 8.5930 .3383 5.4630 .2151 1.6550 .0651 1.2000 .0472 0.1700 .0069
5895371 HNGJ0905ANSNHD HNGJ535ANSNHD   WP25PM 12 15.8800 .6252 8.5930 .3383 5.4630 .2151 1.6550 .0651 1.2000 .0472 0.1700 .0069
5895372 HNGJ0905ANSNHD HNGJ535ANSNHD   WP35CM 12 15.8800 .6252 8.5930 .3383 5.4630 .2151 1.6550 .0651 1.2000 .0472 0.1700 .0069
Face Mills • M1200

15°/75° • 45°• 30°/60° Inserts • HNGJ-LD
(10 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
3030034 HNGJ0905ANENLD HNGJ535ANENLD   TN6540 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0500 .0020
3093559 HNGJ0905ANENLD HNGJ535ANENLD   TN6520 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0500 .0020
5528973 HNGJ0905ANENLD HNGJ535ANENLD   WS30PM 12 15.8800 .6250 8.5800 .3383 5.5600 .2190 1.8030 .0710 1.2000 .0472 0.0500 .0020
5895346 HNGJ0905ANENLD HNGJ535ANENLD   WP25PM 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0500 .0020
5895348 HNGJ0905ANENLD HNGJ535ANENLD   WP40PM 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0500 .0020
5895347 HNGJ0905ANENLD HNGJ535ANENLD   WP35CM 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0500 .0020
Face Mills • M1200

15°/75° • 45°• 30°/60° Inserts • HNGJ-LDJ
(2 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
3606383 HNGJ0905ANFNLDJ HNGJ535ANFNLDJ   THM-U 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0472 0.0200 .0008
3865373 HNGJ0905ANFNLDJ HNGJ535ANFNLDJ   TN6501 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0472 0.0200 .0008
Face Mills • M1200

15°/75° • 45°• 30°/60° Inserts • HNGJ-GD
(11 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
3037596 HNGJ0905ANSNGD HNGJ535ANSNGD   TN6540 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.1000 .0039
3614650 HNGJ0905ANSNGD HNGJ535ANSNGD   TN6525 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.1000 .0039
5427370 HNGJ0905ANSNGD HNGJ535ANSNGD   WK15CM 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.1000 .0039
5528974 HNGJ0905ANSNGD HNGJ535ANSNGD   WS30PM 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.1000 .0039
5895349 HNGJ0905ANSNGD HNGJ535ANSNGD   WP35CM 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.1000 .0039
5895350 HNGJ0905ANSNGD HNGJ535ANSNGD   WP40PM 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.1000 .0039
Face Mills • M1200

15°/75° • 45°• 30°/60° Inserts • HNPJ-HD
(16 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
5895378 HNPJ090543ANSNHD HNPJ53511ANSNHD   WP25PM 12 15.8800 .6250 8.4950 .3340 5.4400 .2142     4.3400 .1709 0.1300 .0051
5895379 HNPJ090543ANSNHD HNPJ53511ANSNHD   WP35CM 12 15.8800 .6250 8.4950 .3340 5.4400 .2142     4.3400 .1709 0.1300 .0051
5895380 HNPJ090543ANSNHD HNPJ53511ANSNHD   WP40PM 12 15.8800 .6250 8.4950 .3340 5.4400 .2142     4.3400 .1709 0.1300 .0051
6180294 HNPJ090543ANSNHD HNPJ53511ANSNHD   WS40PM 12 15.8800 .6250 8.4950 .3340 5.4400 .2142     4.3400 .1709 0.1300 .0051
3670842 HNPJ0905ANSNHD HNPJ535ANSNHD   TN6540 12 15.8800 .6252 8.5930 .3383 5.4630 .2151 1.6550 .0651 1.2000 .0472 0.1810 .0071
3670864 HNPJ0905ANSNHD HNPJ535ANSNHD   TN6520 12 15.8800 .6252 8.5930 .3383 5.4630 .2151 1.6550 .0651 1.2000 .0472 0.1810 .0071
Face Mills • M1200

15°/75° • 45°• 30°/60° Inserts • HNPJ-GD
(10 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
3761185 HNPJ0905ANSNGD HNPJ535ANSNGD   TN6520 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0990 .0039
3761187 HNPJ0905ANSNGD HNPJ535ANSNGD   TN6540 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0990 .0039
5427372 HNPJ0905ANSNGD HNPJ535ANSNGD   WK15CM 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0990 .0039
5550908 HNPJ0905ANSNGD HNPJ535ANSNGD   WP40PM 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0990 .0039
5895374 HNPJ0905ANSNGD HNPJ535ANSNGD   WP25PM 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0990 .0039
5895375 HNPJ0905ANSNGD HNPJ535ANSNGD   WP35CM 12 15.8800 .6250 8.5800 .3380 5.5600 .2190 1.8000 .0710 1.2000 .0470 0.0990 .0039
Face Mills • M1200

45° • Shell Mills • Metric
(21 Products)
  • Milling - Side and FaceMilling - Side and Face
  • Face MillingFace Milling
  • Milling - Through CoolantMilling - Through Coolant
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
3957970 M1200D040Z03HN09 M1200D040Z03HN09   40.0000 1.575 50.9600 2.006 22.0 .8661 39.0000 1.535 40.0000 1.575 4.4000 .1720 3 15800 Y 0.26
3957971 M1200D040Z04HN09 M1200D040Z04HN09   40.0000 1.575 50.9600 2.006 22.0 .8661 39.0000 1.535 40.0000 1.575 4.4400 .1750 4 15800 Y 0.25
3325312 M1200D050Z04HN09 M1200D050Z04HN09   50.0000 1.968 61.0000 2.401 22.0 .8661 38.0000 1.496 40.0000 1.574 4.5000 .1770 4 12700 Y 0.32
3325693 M1200D050Z05HN09 M1200D050Z05HN09   50.0000 1.968 61.0000 2.401 22.0 .8661 38.0000 1.496 40.0000 1.574 4.5000 .1770 5 12700 Y 0.33
3650535 M1200D063Z04HN09 M1200D063Z04HN09   63.0000 2.480 74.0000 2.913 22.0 .8661 50.0000 1.969 40.0000 1.575 4.5000 .1770 4 10100 Y 0.59
3093594 M1200D063Z06HN09 M1200D063Z06HN09   63.0000 2.480 74.0000 2.913 22.0 .8661 50.0000 1.968 40.0000 1.574 4.5000 .1770 6 10100 Y 0.56
Face Mills • M1200

45° • Weldon® End Mills • Metric
(2 Products)
  • Shank - Cylindrical  Weldon 2 FlatShank - Cylindrical Weldon 2 Flat
  • Face MillingFace Milling
  • Milling - Through CoolantMilling - Through Coolant
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [L2] Head Length [L2] Head Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
3325311 M1200D040Z04B25HN09 M1200D040Z04B25HN09   40.0000 1.574 51.0000 2.008 25.0 .9843 107.0000 4.213 50.0000 1.969 4.5000 .1770 4 15800 Y 0.52
3325310 M1200D040Z03B25HN09 M1200D040Z03B25HN09   40.0000 1.574 51.0100 2.008 25.0 .9843 107.0000 4.213 50.0000 1.969 4.5000 .1770 3 15800 Y 0.53
Face Mills • M1200

45° • Shell Mills • Inch
(26 Products)
  • Milling - Side and FaceMilling - Side and Face
  • Face MillingFace Milling
  • Milling - Through CoolantMilling - Through Coolant
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D4] Bolt Circle 4 [D4] Bolt Circle 3 [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Pounds
3954508 M1200D1000Z20S250HN09 M1200D1000Z20S250HN09   254.0000 10.000 264.9920 10.433 63.5 2.5 101.6000 4.000 180.8500 7.120 60.4500 2.380 4.5000 .1770 20 2510 Y 24.52
3323871 M1200D200Z04S075HN09 M1200D200Z04S075HN09   50.8000 2.000 61.8000 2.434 19.05 .75     44.4500 1.750 39.8780 1.570 4.5000 .1770 4 12500 Y 0.81
3323872 M1200D200Z05S075HN09 M1200D200Z05S075HN09   50.8000 2.000 61.8000 2.434 19.05 .75     44.4500 1.750 39.8780 1.570 4.5000 .1770 5 12500 Y 0.82
3650540 M1200D300Z05S100HN09 M1200D300Z05S100HN09   76.2000 3.000 87.2000 3.433 25.4 1.0     55.6010 2.189 44.4500 1.750 4.5000 .1770 5 8300 Y 1.86
3323875 M1200D300Z06S100HN09 M1200D300Z06S100HN09   76.2000 3.000 87.2000 3.433 25.4 1.0     55.6000 2.189 44.4500 1.750 4.5000 .1770 6 8300 Y 1.79
3650541 M1200D400Z06S125HN09 M1200D400Z06S125HN09   101.6000 4.000 112.5800 4.432 31.75 1.25     69.1490 2.722 44.4500 1.750 4.5000 .1770 6 6300 Y 3.17
Face Mills • M1200

45° • Inserts • XNGJ-GD3 Wiper
(8 Products)
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice Grade Cutting Edges per Insert [D] Insert IC Size [D] Insert IC Size [L10] Insert Cutting Edge Length [L10] Insert Cutting Edge Length [S] Insert Thickness [S] Insert Thickness [BS] Corner Facet Length [BS] Corner Facet Length [Rε] Corner Radius [Rε] Corner Radius Average Chip Thickness [HM] Average Chip Thickness [HM]
3066479 XNGJ0905ANSNGD3W XNGJ535ANSNGD3W   TN6540 3 15.8800 .6250 9.6000 .3770 5.5090 .2169 6.0000 .2300 1.6000 .0630 0.0940 .0037
3117962 XNGJ0905ANSNGD3W XNGJ535ANSNGD3W   TN6510 3 15.8800 .6250 9.6000 .3770 5.5090 .2169 6.0000 .2300 1.6000 .0630 0.0940 .0037
5622622 XNGJ0905ANSNGD3W XNGJ535ANSNGD3W   WK15CM 3 15.8800 .6250 9.6000 .3770 5.5090 .2169 6.0000 .2300 1.6000 .0630 0.0940 .0037
5895381 XNGJ0905ANSNGD3W XNGJ535ANSNGD3W   WP25PM 3 15.8800 .6250 9.6000 .3770 5.5090 .2169 6.0000 .2300 1.6000 .0630 0.0940 .0037
3523620 XNGJ0905ANSNGD3W XNGJ535ANSNGD3W   TN6525 3 15.8800 .6250 9.6000 .3770 5.5090 .2169 6.0000 .2300 1.6000 .0630 0.0940 .0037
3524707 XNGJ0905ANSNGD3W XNGJ535ANSNGD3W   TN6520 3 15.8800 .6250 9.6000 .3770 5.5090 .2169 6.0000 .2300 1.6000 .0630 0.0940 .0037