VSM11 Series

Vybrat filtry
Filters
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (15)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (15)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (15)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (15)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (15)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (15)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (15)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (15)
  • M Stainless Steel (15)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (15)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (15)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (15)
  • K Cast Iron (15)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS (15)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS (15)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS (15)
  • N Non-Ferrous Materials (15)
    • N1
      Wrought Aluminum (15)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2% (15)
    • N3
      High-Silicon Aluminum Alloys Si >12.2% (15)
  • S High-Temp Alloys (15)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (15)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (15)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (15)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (15)
  • H Hardened Materials (15)
    • H1
      Hardened Materials 44-48 HRC (15)
Applications
Applications
  • Face Milling Face Milling (15)
  • Pocket Pocket (1)
  • Pocket Helical Pocket Helical (1)
  • Pocket Milling Pocket Milling (1)
  • Profile Milling Profile Milling (1)
  • Ramping Ramping (1)
  • Shoulder Bottom Shoulder Shoulder Bottom Shoulder (1)
  • Shoulder Milling Shoulder Milling (15)
  • Shoulder Roughing Shoulder Roughing (15)
  • Shoulder Square End Shoulder Square End (8)
  • Slot Milling Slot Milling (11)
  • Slot Square End Slot Square End (4)
Cutting Diameter
Cutting Diameter
  • 0.984 in (1)
  • 1.0 in (1)
  • 1.25 in (2)
  • 1.26 in (2)
  • 1.5 in (2)
  • 1.575 in (2)
  • 1.969 in (2)
  • 2.0 in (3)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 25.0 mm (1)
  • 25.401 mm (1)
  • 31.75 mm (2)
  • 32.0 mm (2)
  • 38.1 mm (2)
  • 40.0 mm (2)
  • 50.0 mm (2)
  • 50.801 mm (3)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Length
Cutting Length
  • 42.026 mm (1)
  • 42.2 mm (1)
  • 42.276 mm (1)
  • 42.7 mm (2)
  • 43.1 mm (2)
  • 43.2 mm (1)
  • 43.225 mm (2)
  • 51.625 mm (5)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 1.655 in (1)
  • 1.661 in (1)
  • 1.665 in (1)
  • 1.681 in (2)
  • 1.697 in (2)
  • 1.701 in (1)
  • 1.702 in (2)
  • 2.032 in (5)
Cutting Length Min komu Cutting Length Max
Reach
Reach
  • 2.205 in (3)
  • 2.25 in (3)
  • 2.362 in (2)
  • 2.5 in (2)
  • 2.75 in (2)
  • 2.757 in (2)
  • 3.0 in (1)
Reach Min komu Reach Max
Reach
Reach
  • 56.0 mm (3)
  • 57.151 mm (3)
  • 60.0 mm (2)
  • 63.5 mm (2)
  • 69.851 mm (2)
  • 70.0 mm (2)
  • 76.2 mm (1)
Reach Min komu Reach Max
Connection Style
Connection Style
  • A-Socket Head Cap Screw (9)
  • Weldon (6)
Number of Flutes
Number of Flutes
  • 2 (2)
  • 3 (2)
  • 4 (6)
  • 5 (2)
  • 6 (3)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (15)
  • 2.0 (15)
Cutting Edges Per Insert Min komu Cutting Edges Per Insert Max
Over All Length [L]
Over All Length [L]
  • 2.362 in (2)
  • 2.5 in (2)
  • 2.75 in (2)
  • 2.757 in (2)
  • 3.0 in (1)
  • 4.449 in (1)
  • 4.53 in (3)
  • 4.606 in (2)
Over All Length [L] Min komu Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 60.0 mm (2)
  • 63.5 mm (2)
  • 69.851 mm (2)
  • 70.0 mm (2)
  • 76.2 mm (1)
  • 113.0 mm (1)
  • 115.051 mm (3)
  • 117.0 mm (2)
Over All Length [L] Min komu Over All Length [L] Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.008 in (15)
  • 0.016 in (15)
  • 0.031 in (15)
  • 0.047 in (15)
  • 0.063 in (15)
  • 0.079 in (15)
  • 0.095 in (15)
  • 0.122 in (15)
  • 0.126 in (15)
Corner Radius Min komu Corner Radius Max
Corner Radius
Corner Radius
  • 0.2 mm (15)
  • 0.4 mm (15)
  • 0.775 mm (15)
  • 0.8 mm (15)
  • 1.201 mm (15)
  • 1.6 mm (15)
  • 2.0 mm (15)
  • 2.401 mm (15)
  • 3.1 mm (15)
  • 3.2 mm (15)
Corner Radius Min komu Corner Radius Max
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WDN10U (15)
  • WK15CM (15)
  • WK15PM (15)
  • WN10HM (15)
  • WN25PM (15)
  • WP25PM (15)
  • WP35CM (15)
  • WP40PM (15)
  • WS30PM (15)
  • WS40PM (15)
  • WU20PM (15)
  • WU35PM (15)
Maximum Ramp Angle
Maximum Ramp Angle
  • 1.8 (5)
  • 2.4 (2)
  • 2.5 (2)
  • 3.2 (4)
  • 4.4 (1)
  • 4.5 (1)
Maximum Ramp Angle Min komu Maximum Ramp Angle Max
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (6)
  • SHELL MILL (9)
Back-End Diameter
Back-End Diameter
  • 16.0 mm (2)
  • 19.05 mm (4)
  • 22.0 mm (2)
  • 25.0 mm (1)
  • 25.401 mm (2)
  • 31.75 mm (2)
  • 32.0 mm (2)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.63 in (2)
  • 0.75 in (4)
  • 0.866 in (2)
  • 0.984 in (1)
  • 1.0 in (2)
  • 1.25 in (2)
  • 1.26 in (2)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""
Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
product-image
Please adjust the following properties from

Katalogové číslo ISO

Katalogové číslo ANSI

to find similar products.

The following files are available

Please select a file to download

Models

Product data

Abyste viděli informace ve svém panelu, musíte být přihlášeni.
Session expired due to inactivity, please login again
Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
položek bylo úspěšně přidáno do košíku

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number Katalogové číslo ISO Karbid    
Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

You are about to leave the Solution building process.

Are you sure you want to leave?