Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Máte otázku týkající se produktu?

Zobrazit úplný seznam globálních servisních odborníků podle specializace.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Zpět k řešení

Úprava řešení

Přidání řešení

Název řešení: {{SolutionName}}

M370™ Series • IC08 • Medium

Vybrat filtry
Filters
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (46)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (44)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (46)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (46)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (46)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (46)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (46)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (46)
  • M Stainless Steel (46)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (46)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (46)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (46)
  • K Cast Iron (42)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (42)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (42)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (42)
  • N Non-Ferrous Materials (37)
    • N1
      Wrought Aluminum
      (37)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (37)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (37)
  • S High-Temp Alloys (44)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (44)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (44)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (44)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (44)
  • H Hardened Materials (38)
    • H1
      Hardened Materials 44-48 HRC
      (38)
Select All Star
  • CN (7)
  • DE (24)
  • GB (11)
  • IN (2)
  • SG (12)
  • US (12)
Applications
Applications
  • Chamfer Milling Chamfer Milling (1)
  • Face Milling Face Milling (35)
  • Pocket Pocket (35)
  • Pocket Helical Pocket Helical (34)
  • Pocket Milling Pocket Milling (35)
  • Pocket Plunge Milling Pocket Plunge Milling (35)
  • Profile Milling Profile Milling (35)
  • Ramping Ramping (35)
  • Shoulder Milling Shoulder Milling (34)
  • Shoulder Roughing Shoulder Roughing (34)
  • Slot Milling Slot Milling (34)
  • Slot Square End Slot Square End (1)
Cutting Diameter
Cutting Diameter
  • 0.441 in (3)
  • 0.445 in (3)
  • 0.457 in (3)
  • 0.461 in (1)
  • 0.555 in (1)
  • 0.702 in (2)
  • 0.711 in (1)
  • 0.713 in (2)
  • 0.717 in (1)
  • 0.95 in (1)
  • 0.954 in (2)
  • 1.024 in (1)
  • 1.028 in (1)
  • 1.102 in (1)
  • 1.417 in (2)
  • 1.449 in (2)
  • 1.499 in (2)
  • 1.931 in (1)
  • 1.949 in (1)
  • 2.043 in (1)
  • 2.273 in (1)
  • 2.449 in (1)
  • 2.598 in (1)
Cutting Diameter Min komu Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 11.201 mm (3)
  • 11.3 mm (3)
  • 11.601 mm (3)
  • 11.701 mm (1)
  • 14.101 mm (1)
  • 17.8 mm (2)
  • 18.05 mm (1)
  • 18.1 mm (2)
  • 18.2 mm (1)
  • 24.1 mm (1)
  • 24.201 mm (2)
  • 26.0 mm (1)
  • 26.1 mm (1)
  • 28.0 mm (1)
  • 36.0 mm (2)
  • 36.801 mm (2)
  • 38.075 mm (2)
  • 49.051 mm (1)
  • 49.5 mm (1)
  • 51.901 mm (1)
  • 57.7 mm (1)
  • 62.2 mm (1)
  • 66.0 mm (1)
Cutting Diameter Min komu Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 25.0 mm (6)
  • 25.401 mm (4)
  • 28.0 mm (1)
  • 31.75 mm (2)
  • 32.0 mm (4)
  • 38.1 mm (3)
  • 40.0 mm (2)
  • 42.0 mm (1)
  • 50.0 mm (2)
  • 50.801 mm (2)
  • 52.0 mm (2)
  • 63.0 mm (1)
  • 63.5 mm (1)
  • 66.0 mm (1)
  • 76.2 mm (2)
  • 80.0 mm (1)
Maximum Cutting Diameter Min komu Maximum Cutting Diameter Max
Maximum Cutting Diameter
Maximum Cutting Diameter
  • 0.984 in (6)
  • 1.0 in (4)
  • 1.102 in (1)
  • 1.25 in (2)
  • 1.26 in (4)
  • 1.5 in (3)
  • 1.575 in (2)
  • 1.655 in (1)
  • 1.969 in (2)
  • 2.0 in (2)
  • 2.047 in (2)
  • 2.48 in (1)
  • 2.5 in (1)
  • 2.598 in (1)
  • 3.0 in (2)
  • 3.15 in (1)
Maximum Cutting Diameter Min komu Maximum Cutting Diameter Max
Cutting Length
Cutting Length
  • 1.25 mm (35)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 0.049 in (35)
Cutting Length Min komu Cutting Length Max
Reach
Reach
  • 1.379 in (3)
  • 1.5 in (7)
  • 1.575 in (14)
  • 1.693 in (2)
  • 1.969 in (9)
Reach Min komu Reach Max
Reach
Reach
  • 35.0 mm (3)
  • 38.1 mm (7)
  • 40.0 mm (14)
  • 43.0 mm (2)
  • 50.0 mm (9)
Reach Min komu Reach Max
Tool Cutting Edge Angle
Tool Cutting Edge Angle
  • 12.0 (34)
  • 78.0 (1)
Tool Cutting Edge Angle Min komu Tool Cutting Edge Angle Max
Connection Style
Connection Style
  • 2 Key & Socket Head Cap Screw (1)
  • A-Socket Head Cap Screw (14)
  • Screw-On Connection (5)
  • Straight-Cylindrical (15)
Number of Flutes
Number of Flutes
  • 2 (5)
  • 3 (10)
  • 4 (6)
  • 5 (5)
  • 6 (5)
  • 7 (3)
  • 8 (1)
Internal Coolant Capability
Internal Coolant Capability
application
Grade Of Cutting Tool
Grade Of Cutting Tool
  • TN5515 (35)
  • TN6520 (35)
  • TN6525 (37)
  • TN6540 (37)
  • TN7535 (35)
  • WK15CM (36)
  • WP25PM (37)
  • WP40PM (37)
  • WS30PM (36)
  • WS40PM (37)
Hand Of Tool
Hand Of Tool
  • R (35)
Wiper Insert
Wiper Insert
  • N (12)
Maximum Ramp Angle
Maximum Ramp Angle
  • 0.48 (1)
  • 0.5 (3)
  • 0.62 (1)
  • 0.66 (1)
  • 0.81 (1)
  • 0.83 (3)
  • 0.84 (2)
  • 1.01 (1)
  • 1.09 (2)
  • 1.41 (6)
  • 1.46 (2)
  • 1.5 (3)
  • 1.73 (1)
  • 2.05 (3)
  • 2.09 (5)
Maximum Ramp Angle Min komu Maximum Ramp Angle Max
frontEnd
Insert Shape
Insert Shape
  • X-TRIGON WO_J 101.5 (37)
  • X-TRIGON WO_J 80 (45)
Neck Diameter
Neck Diameter
  • 0.828 in (1)
  • 0.843 in (3)
  • 0.866 in (3)
  • 0.906 in (1)
  • 1.093 in (2)
  • 1.143 in (3)
  • 1.196 in (1)
  • 1.324 in (1)
Neck Diameter Min komu Neck Diameter Max
Neck Diameter
Neck Diameter
  • 21.0 mm (1)
  • 21.401 mm (3)
  • 22.0 mm (3)
  • 23.0 mm (1)
  • 27.75 mm (2)
  • 29.0 mm (3)
  • 30.375 mm (1)
  • 33.625 mm (1)
Neck Diameter Min komu Neck Diameter Max
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
  • X-TRIGON WO_J 101.5 (2)
  • X-TRIGON WO_J 80 (10)
Insert IC Size
Insert IC Size
  • 7.801 mm (12)
Insert IC Size Min komu Insert IC Size Max
Insert IC Size
Insert IC Size
  • 0.307 in (12)
Insert IC Size Min komu Insert IC Size Max
Cutting Edge Length
Cutting Edge Length
  • 6.301 mm (12)
Cutting Edge Length Min komu Cutting Edge Length Max
Cutting Edge Length
Cutting Edge Length
  • 0.248 in (12)
Cutting Edge Length Min komu Cutting Edge Length Max
Chip Breaker CBMD
Chip Breaker CBMD
  • MH (6)
  • MM (6)
Cutting Tool Material
Cutting Tool Material
  • H W (12)
Tolerance Class
Tolerance Class
  • E (12)
backEnd
Connection Type
Connection Type
  • CYLINDRICAL (15)
  • SCREW-ON (5)
  • SHELL MILL (15)
Back-End Diameter
Back-End Diameter
  • 12.701 mm (1)
  • 16.0 mm (2)
  • 19.05 mm (3)
  • 21.0 mm (3)
  • 22.0 mm (5)
  • 25.0 mm (5)
  • 25.401 mm (5)
  • 27.0 mm (2)
  • 29.0 mm (2)
  • 31.701 mm (1)
  • 31.75 mm (2)
  • 32.0 mm (3)
  • 38.1 mm (1)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.5 in (1)
  • 0.63 in (2)
  • 0.75 in (3)
  • 0.828 in (3)
  • 0.866 in (5)
  • 0.984 in (5)
  • 1.0 in (5)
  • 1.063 in (2)
  • 1.143 in (2)
  • 1.248 in (1)
  • 1.25 in (2)
  • 1.26 in (3)
  • 1.5 in (1)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""
Zúžení podle kategorie:
Informace o produktech
Metrické
Palcové

PŮVODNÍ PRODUKT

M370 • Stopkové frézy se závitovou stopkou • WO08.. • Metrické M370 • Stopkové frézy se závitovou stopkou • WO08.. • Metrické

Frézy se závitovou stopkou • Střední obrábění • Metrické
(4 Products)
  • Shank - Screw-OnShank - Screw-On
  • 3D Profiling3D Profiling
  • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
  • Slotting: Square EndSlotting: Square End
  • Face MillingFace Milling
  • Ramping: BlankRamping: Blank
  • PocketingPocketing
  • Helical MillingHelical Milling
  • Plunge MillingPlunge Milling
  • Milling - Through CoolantMilling - Through Coolant
Informace o produktech
SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [DPM] Pilot Diameter Machine Side [DPM] Pilot Diameter Machine Side [G3X] Connection Thread Size External [L2] Head Length [L2] Head Length [WF] Width of Flat [WF] Width of Flat [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms
4056186 M370D025Z02M12WO08 M370D025Z02M12WO08   25.0000 .9840 11.2000 .4409 21.0 .8268 12.5000 .4920 M12 35.0000 1.378 17.0000 .6690 1.2500 .0490 2 2.090 46000 Y 0.09
    Ceníková cena:
    $336.40 /každý
    Vaše cena::
    4170918 M370D025Z03M12WO08 M370D025Z03M12WO08   25.0000 .9840 11.3000 .4400 21.0 .8268 12.5000 .4920 M12 35.0000 1.378 17.0000 .6670 1.2500 .0490 3 2.090 46000 Y 0.09
      Ceníková cena:
      $342.80 /každý
      Vaše cena::
      4056187 M370D032Z04M16WO08 M370D032Z04M16WO08   32.0000 1.260 18.1000 .7100 29.0 1.141 17.0000 .6690 M16 43.0000 1.693 24.0000 .9450 1.2500 .0490 4 1.410 38700 Y 0.21
        Ceníková cena:
        $364.54 /každý
        Vaše cena::
        4056188 M370D042Z05M16WO08 M370D042Z05M16WO08   42.0000 1.653 28.0000 1.100 29.0 1.141 17.0000 .6690 M16 43.0000 1.693 24.0000 .9450 1.2500 .0490 5 1.010 32500 Y 0.57
          Ceníková cena:
          $393.94 /každý
          Vaše cena::
          Ceníková cena:
          Sleva: %
          Vaše cena::
          Výměna Tato položka není k dispozici
          Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

          PŮVODNÍ PRODUKT

          M370 • Válcová stopka • W008.. • Metrické M370 • Válcová stopka • W008.. • Metrické

          Stopkové frézy s válcovou stopkou • Střední obrábění • Metrické
          (8 Products)
          • Shank - Cylindrical PlainShank - Cylindrical Plain
          • 3D Profiling3D Profiling
          • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
          • Slotting: Square EndSlotting: Square End
          • Face MillingFace Milling
          • Ramping: BlankRamping: Blank
          • PocketingPocketing
          • Plunge MillingPlunge Milling
          • Milling - Through CoolantMilling - Through Coolant
          Informace o produktech
          SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [LBX] Body Length Maximum [LBX] Body Length Maximum [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
          4008281 M370D025Z02A25WO08L200 M370D025Z02A25WO08L200   25.0000 .9840 11.2000 .4409 25.0 .9843 200.0000 7.874 50.0000 1.968 1.2500 .0490 2 46000 Y 0.68
            Ceníková cena:
            $361.98 /každý
            Vaše cena::
            4056189 M370D025Z03A25WO08L150 M370D025Z03A25WO08L150   25.0000 .9840 11.2000 .4400 25.0 .9843 150.0000 5.906 40.0000 1.574 1.2500 .0490 3 46000 Y 0.50
              Ceníková cena:
              $342.80 /každý
              Vaše cena::
              4170919 M370D025Z03A25WO08L200 M370D025Z03A25WO08L200   25.0000 .9840 11.3000 .4400 25.0 .9843 200.0000 7.874 40.0000 1.575 1.2500 .0490 3 46000 Y 0.69
                Ceníková cena:
                $368.38 /každý
                Vaše cena::
                4056190 M370D028Z03A25WO08L200 M370D028Z03A25WO08L200   28.0000 1.102 14.1000 .5600 25.0 .9843 200.0000 7.874 40.0000 1.575 1.2500 .0490 3 42400 Y 0.70
                  Ceníková cena:
                  $382.45 /každý
                  Vaše cena::
                  4056191 M370D032Z04A32WO08L150 M370D032Z04A32WO08L150   32.0000 1.260 18.1000 .7100 32.0 1.259 150.0000 5.906 40.0000 1.574 1.2500 .0490 4 38700 Y 0.84
                    Ceníková cena:
                    $364.54 /každý
                    Vaše cena::
                    4056192 M370D032Z04A32WO08L200 M370D032Z04A32WO08L200   32.0000 1.260 18.0600 .7110 32.0 1.259 200.0000 7.874 50.0000 1.968 1.2500 .0490 4 38700 Y 1.14
                      Ceníková cena:
                      $390.10 /každý
                      Vaše cena::
                      Ceníková cena:
                      Sleva: %
                      Vaše cena::
                      Výměna Tato položka není k dispozici
                      Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                      PŮVODNÍ PRODUKT

                      M370 • Nástrčné frézy • WO08... • Metrické M370 • Nástrčné frézy • WO08... • Metrické

                      Nástrčné frézy • Střední obrábění • Metrické
                      (9 Products)
                      • Milling - Side and FaceMilling - Side and Face
                      • 3D Profiling3D Profiling
                      • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
                      • Slotting: Square EndSlotting: Square End
                      • Face MillingFace Milling
                      • Ramping: BlankRamping: Blank
                      • PocketingPocketing
                      • Helical MillingHelical Milling
                      • Plunge MillingPlunge Milling
                      • Milling - Through CoolantMilling - Through Coolant
                      Informace o produktech
                      SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Max RPM Coolant Supply Weight Kilograms
                      4056193 M370D040Z04WO08 M370D040Z04WO08   40.0000 1.575 26.0000 1.020 16.0 .6299 37.0000 1.457 40.0000 1.575 1.2500 .0490 4 33500 Y 0.19
                        Ceníková cena:
                        $428.49 /každý
                        Vaše cena::
                        4170922 M370D040Z05WO08 M370D040Z05WO08   40.0000 1.575 26.1000 1.030 16.0 .63 37.0000 1.457 40.0000 1.575 1.2500 .0490 5 33500 Y 0.19
                          Ceníková cena:
                          $464.30 /každý
                          Vaše cena::
                          4008276 M370D050Z05WO08 M370D050Z05WO08   50.0000 1.968 36.0000 1.420 22.0 .867 44.0000 1.732 40.0000 1.575 1.2500 .0490 5 29200 Y 0.29
                            Ceníková cena:
                            $498.85 /každý
                            Vaše cena::
                            4056194 M370D052Z05WO08 M370D052Z05WO08   52.0000 2.047 38.0700 1.499 22.0 .8661 44.0000 1.732 50.0000 1.968 1.2500 .0490 5 28600 Y 0.41
                              Ceníková cena:
                              $498.85 /každý
                              Vaše cena::
                              4056195 M370D063Z06WO08 M370D063Z06WO08   63.0000 2.480 49.0510 1.931 22.0 .867 60.0000 2.362 50.0000 1.968 1.2500 .0490 6 25500 Y 0.74
                                Ceníková cena:
                                $567.93 /každý
                                Vaše cena::
                                4008277 M370D066Z06WO08 M370D066Z06WO08   66.0000 2.598 51.9000 2.040 27.0 1.063 60.0000 2.362 50.0000 1.969 1.2500 .0490 6 24900 Y 0.77
                                  Ceníková cena:
                                  $567.93 /každý
                                  Vaše cena::
                                  Ceníková cena:
                                  Sleva: %
                                  Vaše cena::
                                  Výměna Tato položka není k dispozici
                                  Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                  PŮVODNÍ PRODUKT

                                  M370 • Shell Mills • iC08 • Medium • Inch M370 • Shell Mills • iC08 • Medium • Inch

                                  Shell Mills • Medium • Inch
                                  (6 Products)
                                  • Milling - Side and FaceMilling - Side and Face
                                  • 3D Profiling3D Profiling
                                  • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
                                  • Slotting: Square EndSlotting: Square End
                                  • Face MillingFace Milling
                                  • Ramping: BlankRamping: Blank
                                  • PocketingPocketing
                                  • Helical MillingHelical Milling
                                  • Plunge MillingPlunge Milling
                                  • Milling - Through CoolantMilling - Through Coolant
                                  Informace o produktech
                                  SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [D6] Hub Diameter [D6] Hub Diameter [L] Overall Length [L] Overall Length [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms Weight Pounds
                                  4047660 M370D150Z04S050WO08 M370D150Z04S050WO08   38.1000 1.500 24.1000 .9500 12.7 .5 36.0000 1.417 40.0000 1.575 1.2500 .0490 4 1.500 34500 Y 0.19 0.41
                                    Ceníková cena:
                                    $428.49 /každý
                                    Vaše cena::
                                    4047661 M370D200Z05S075WO08 M370D200Z05S075WO08   50.8000 2.000 36.8000 1.450 19.05 .75 44.0000 1.732 40.0000 1.575 1.2500 .0490 5 0.830 29000 Y 0.37 0.82
                                      Ceníková cena:
                                      $498.85 /každý
                                      Vaše cena::
                                      4047662 M370D200Z07S075WO08 M370D200Z07S075WO08   50.8000 2.000 36.8000 1.450 19.05 .75 44.0000 1.732 40.0000 1.575 1.2500 .0490 7 0.830 29000 Y 0.38 0.83
                                        Ceníková cena:
                                        $567.93 /každý
                                        Vaše cena::
                                        4171169 M370D250Z07S075WO08 M370D250Z07S075WO08   63.5000 2.500 49.5000 1.950 19.05 .75 44.0000 1.732 40.0000 1.575 1.2500 .0490 7 0.830 29000 Y 0.64 1.42
                                          Ceníková cena:
                                          $603.73 /každý
                                          Vaše cena::
                                          6030309 M370D300Z06S100WO08 M370D300Z06S100WO08   76.2000 3.000 62.2000 2.450 25.4 1.0 60.0000 2.362 50.0000 1.968 1.2500 .0490 6 0.500 22900 Y 2.23 4.91
                                            Ceníková cena:
                                            $653.84 /každý
                                            Vaše cena::
                                            4171170 M370D300Z08S100WO08 M370D300Z08S100WO08   76.2000 3.000 57.7000 2.270 25.4 1.0 60.0000 2.362 50.0000 1.968 1.2500 .0490 8 0.500 22900 Y 2.19 4.82
                                              Ceníková cena:
                                              $672.81 /každý
                                              Vaše cena::
                                              Ceníková cena:
                                              Sleva: %
                                              Vaše cena::
                                              Výměna Tato položka není k dispozici
                                              Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora

                                              PŮVODNÍ PRODUKT

                                              M370 • Cylindrical End Mills • iC08 • Medium • Inch M370 • Cylindrical End Mills • iC08 • Medium • Inch

                                              Cylindrical End Mills • Medium • Inch
                                              (7 Products)
                                              • Shank - Cylindrical PlainShank - Cylindrical Plain
                                              • 3D Profiling3D Profiling
                                              • Side Milling/Shoulder Milling: RoughingSide Milling/Shoulder Milling: Roughing
                                              • Slotting: Square EndSlotting: Square End
                                              • Face MillingFace Milling
                                              • Ramping: BlankRamping: Blank
                                              • PocketingPocketing
                                              • Plunge MillingPlunge Milling
                                              • Milling - Through CoolantMilling - Through Coolant
                                              Informace o produktech
                                              SAP Material Number ISO Catalog Number ANSI Catalog Number First Choice [D1MAX] Maximum Cutting Diameter [D1MAX] Maximum Cutting Diameter [D1] Effective Cutting Diameter [D1] Effective Cutting Diameter [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [L] Overall Length [L] Overall Length [LBX] Body Length Maximum [LBX] Body Length Maximum [AP1MAX] 1st Maximum Cutting Depth [AP1MAX] 1st Maximum Cutting Depth Number of Inserts Maximum Ramping Angle Max RPM Coolant Supply Weight Kilograms Weight Pounds
                                              4047654 M370D100Z02C100WN08L600 M370D100Z02C100WO08L600   25.4000 1.000 11.6000 .4600 25.4 1.0 152.4000 6.000 38.1000 1.500 1.2500 .0490 2 2.050 45500 Y 0.53 1.17
                                                <