DA J, K & L Tap Tension only-SS • Inch

Metric

SAP Material Number	1017629
ISO Catalog Number	SS100TOK700
ANSI Catalog Number	SS100TOK700
[CST] Catalog Collet Series	K
[D11] Lock Nut Diameter	27.0000 mm
[D11] Lock Nut Diameter	1.063 in
[L] Overall Length	177.8120 mm
[L] Overall Length	7.000 in
[LS] Shank Length	138.124 mm
[LS] Shank Length	5.438 in
[L9] Clamping Length	37.3380 mm
[L9] Clamping Hole Length	1.470 in
[LTN] Slide Tension	19.0500 mm
[LTN] Slide Tension	.7500 in
[WF] Distance Across Flats	19.050 mm
[WF] Distance Across Flats	.7500 in
Torque Catalog Foot Pounds	45
Weight Pounds	1.24
[D] Adapter / Shank / Bore Diameter	25.4 mm
[D] Adapter / Shank / Bore Diameter	1.0 in

Small outside diameter clearance is ideal for use with machining centers, close center-distance, and fixture issues.

Solid hard start ensures tap will start at same point every time, regardless if it is sharp or dull.

Alternate springs available to adjust tension pressure to control thread quality in a variety of workpiece conditions.

Spare Parts for DA J, K & L Tap Tension only-SS • Inch

LOCKNUT LNA K 04M

15/16 OPEN END WRENCH