| Product # | 6180295 |
| ISO Catalog Number | HNGJ0704ANENLD |
| ANSI Catalog Number | HNGJ0704ANENLD |
| Grade | WS40PM |
| Insert Num of Cutting Edges | 12 |
| [D] Insert IC Size Metric | 12,70 |
| [D] Insert IC Size Inch | .5000 |
| [L10] Ins Cut Edge Length mm | 6,800 |
| [L10] Ins Cut Edge Length In | .2677 |
| [S] Insert Thickness Metric | 4,480 |
| [S] Insert Thickness Inch | .1763 |
| [BS]Corner Facet Length Metric | 1,600 |
| [BS] Corner Facet Length Inch | .0640 |
| [REPSILON] Corner Radius MM | 1,200 |
| [REPSILON] Corner Radius Inch | .0469 |
| Average Chip Thickness [HM] | 0,076 |
| Average Chip Thickness [HM] | .0030 |
| Product # | ISO Catalog Number | ANSI Catalog Number | Grade | Insert Num of Cutting Edges | [D] Insert IC Size Metric | [D] Insert IC Size Inch | [L10] Ins Cut Edge Length mm | [L10] Ins Cut Edge Length In | [S] Insert Thickness Metric | [S] Insert Thickness Inch | [BS]Corner Facet Length Metric | [BS] Corner Facet Length Inch | [REPSILON] Corner Radius MM | [REPSILON] Corner Radius Inch | Average Chip Thickness [HM] | Average Chip Thickness [HM] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3954418 | HNGJ0704ANENLD | HNGJ0704ANENLD | TN6505 | 12 | 12,70 | .5000 | 6,800 | .2677 | 4,480 | .1763 | 1,600 | .0640 | 1,200 | .0469 | 0,076 | .0030 |
| 3954419 | HNGJ0704ANENLD | HNGJ0704ANENLD | TN6510 | 12 | 12,70 | .5000 | 6,800 | .2677 | 4,480 | .1763 | 1,600 | .0640 | 1,200 | .0469 | 0,076 | .0030 |
| 3954420 | HNGJ0704ANENLD | HNGJ0704ANENLD | TN6520 | 12 | 12,70 | .5000 | 6,800 | .2677 | 4,480 | .1763 | 1,600 | .0640 | 1,200 | .0469 | 0,076 | .0030 |
| 3954421 | HNGJ0704ANENLD | HNGJ0704ANENLD | TN6525 | 12 | 12,70 | .5000 | 6,800 | .2677 | 4,480 | .1763 | 1,600 | .0640 | 1,200 | .0469 | 0,076 | .0030 |
| 3954422 | HNGJ0704ANENLD | HNGJ0704ANENLD | TN6540 | 12 | 12,70 | .5000 | 6,800 | .2677 | 4,480 | .1763 | 1,600 | .0640 | 1,200 | .0469 | 0,076 | .0030 |
| 5528975 | HNGJ0704ANENLD | HNGJ0704ANENLD | WS30PM | 12 | 12,70 | .5000 | 6,800 | .2677 | 4,480 | .1763 | 1,600 | .0640 | 1,200 | .0469 | 0,076 | .0030 |
| 5550905 | HNGJ0704ANENLD | HNGJ0704ANENLD | WP40PM | 12 | 12,70 | .5000 | 6,800 | .2677 | 4,480 | .1763 | 1,600 | .0640 | 1,200 | .0469 | 0,076 | .0030 |
| 5895291 | HNGJ0704ANENLD | HNGJ0704ANENLD | WP25PM | 12 | 12,70 | .5000 | 6,800 | .2677 | 4,480 | .1763 | 1,600 | .0640 | 1,200 | .0469 | 0,076 | .0030 |
| 5895292 | HNGJ0704ANENLD | HNGJ0704ANENLD | WP35CM | 12 | 12,70 | .5000 | 6,800 | .2677 | 4,480 | .1763 | 1,600 | .0640 | 1,200 | .0469 | 0,076 | .0030 |
| 6180295 | HNGJ0704ANENLD | HNGJ0704ANENLD | WS40PM | 12 | 12,70 | .5000 | 6,800 | .2677 | 4,480 | .1763 | 1,600 | .0640 | 1,200 | .0469 | 0,076 | .0030 |
| 6180300 | HNGJ070432ANENLD | HNGJ070432ANENLD | WS40PM | 12 | 12,70 | .5000 | 6,800 | .2690 | 4,481 | .1764 | 3,210 | .1264 | 0,076 | .0030 |
| P | ● | ● | ● | ● | ||||||
| M | ● | ● | ● | ● | ● | |||||
| K | ● | ● | ● | |||||||
| N | ||||||||||
| H | ||||||||||
| S | ● | ● | ● | ● | ● | |||||
| C | ||||||||||
| TN6505 | TN6510 | TN6520 | TN6525 | TN6540 | WP25PM | WP35CM | WP40PM | WS30PM | WS40PM |
| Material Group | LightMachining | GeneralPurpose | HeavyMachining | |||
| Geometry | Grade | Geometry | Grade | Geometry | Grade | |
| P1–P2 | .E..LD | WP40PM | .S..GD | WP40PM | .S..HD | WP40PM |
| P3–P4 | .E..LD | WP25PM | .S..GD | WP35CM | .S..HD | WP35CM |
| P5–P6 | .E..LD | WP25PM | .S..GD | WP35CM | .S..HD | WP35CM |
| M1–M2 | .E..LD | WP25PM | .S..GD | WP25PM | .S..HD | WP25PM |
| M3 | .E..LD | WP35CM | .S..GD | WP35CM | .S..HD | WP35CM |
| K1–K2 | .E..LD | TN6510 | .S..GD | WK15CM | .S..HD | WK15CM |
| K3 | .E..LD | WP35CM | .S..GD | WP35CM | .S..HD | WP35CM |
| N1–N2 | .F..LDJ | TN6501 | .F..LDJ | TN6501 | .F..LDJ | TN6501 |
| N3 | .F..LDJ | TN6501 | .F..LDJ | TN6501 | .F..LDJ | TN6501 |
| S1–S2 | .E..LD | WS30PM | .S..GD | WS30PM | .S..HD | WP25PM |
| S3 | .E..LD | WS30PM | .S..GD | WS30PM | .S..GD | WS30PM |
| S4 | .E..LD | WS30PM | .S..GD | WS30PM | .S..HD | WP40PM |
| H1 | ||||||
| Insert Geometry | Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40100% | ||||||||||||
| .F..LDJ | 0,48 | 0,89 | 1,81 | 0,34 | 0,64 | 1,29 | 0,26 | 0,48 | 0,96 | 0,22 | 0,42 | 0,83 | 0,21 | 0,38 | 0,76 | .F..LDJ |
| .E..LD | 0,48 | 1,38 | 2,85 | 0,34 | 0,99 | 2,00 | 0,26 | 0,74 | 1,48 | 0,22 | 0,64 | 1,28 | 0,21 | 0,59 | 1,17 | .E..LD |
| .S..GD | 0,92 | 2,35 | 3,89 | 0,66 | 1,67 | 2,70 | 0,49 | 1,23 | 1,98 | 0,43 | 1,07 | 1,72 | 0,39 | 0,98 | 1,57 | .S..GD |
| .S..HD | 0,92 | 2,35 | 3,89 | 0,66 | 1,67 | 2,70 | 0,49 | 1,23 | 1,98 | 0,43 | 1,07 | 1,72 | 0,39 | 0,98 | 1,57 | .S..HD |
| LightMachining | GeneralPurpose | HeavyMachining |
| Insert Geometry | Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40100% | ||||||||||||
| .F..LDJ | .019 | .035 | .072 | .014 | .025 | .051 | .010 | .019 | .038 | .009 | .016 | .033 | .008 | .015 | .030 | .F..LDJ |
| .E..LD | .019 | .055 | .112 | .014 | .039 | .079 | .010 | .029 | .058 | .009 | .025 | .051 | .008 | .023 | .046 | .E..LD |
| .S..GD | .036 | .093 | .153 | .026 | .066 | .106 | .019 | .049 | .078 | .017 | .042 | .068 | .015 | .039 | .062 | .S..GD |
| .S..HD | .036 | .093 | .153 | .026 | .066 | .106 | .019 | .049 | .078 | .017 | .042 | .068 | .015 | .039 | .062 | .S..HD |
| LightMachining | GeneralPurpose | HeavyMachining |
| Material Group | TN6510 | TN6520 | TN6525 | TN6540 | TN7535 | WK15CM | |||||||||||||
| P | 1 | – | – | – | – | – | – | 410 | 320 | 280 | 360 | 280 | 240 | 545 | 475 | 445 | – | – | – |
| 2 | – | – | – | – | – | – | 320 | 250 | 215 | 250 | 190 | 170 | 335 | 305 | 275 | – | – | – | |
| 3 | – | – | – | – | – | – | 280 | 215 | 185 | 215 | 170 | 140 | 305 | 275 | 245 | – | – | – | |
| 4 | – | – | – | – | – | – | 235 | 170 | 145 | 180 | 130 | 110 | 230 | 210 | 190 | – | – | – | |
| 5 | – | – | – | – | – | – | 310 | 235 | 200 | 240 | 180 | 150 | 310 | 275 | 250 | – | – | – | |
| 6 | – | – | – | – | – | – | 205 | 160 | 130 | 160 | 120 | 100 | 190 | 160 | 130 | – | – | – | |
| M | 1 | – | – | – | – | – | – | 190 | 120 | 80 | 130 | 80 | 60 | 245 | 220 | 185 | – | – | – |
| 2 | – | – | – | – | – | – | 120 | 80 | 50 | 80 | 50 | 40 | 220 | 190 | 170 | – | – | – | |
| 3 | – | – | – | – | – | – | 125 | 80 | 55 | 85 | 50 | 40 | 175 | 155 | 140 | – | – | – | |
| K | 1 | 480 | 350 | 260 | 450 | 320 | 230 | 275 | 245 | 220 | 220 | 205 | 180 | 355 | 320 | 290 | 505 | 460 | 410 |
| 2 | 420 | 280 | 205 | 390 | 250 | 190 | 215 | 190 | 180 | 175 | 155 | 140 | 280 | 250 | 230 | 400 | 355 | 330 | |
| 3 | 335 | 260 | 200 | 300 | 230 | 160 | 180 | 160 | 145 | 155 | 145 | 125 | 235 | 210 | 190 | 335 | 300 | 275 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 50 | 35 | 30 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 25 | 20 | 10 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 70 | 40 | 30 | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 60 | 30 | 25 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | WP25PM | WP35CM | WP40PM | WS30PM | WS40PM | TN6501 | THM-U | |||||||||||||||
| P | 1 | 395 | 340 | 325 | 545 | 475 | 445 | 355 | 310 | 295 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 330 | 290 | 240 | 335 | 305 | 275 | 300 | 260 | 215 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 305 | 260 | 210 | 305 | 275 | 245 | 275 | 235 | 190 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 4 | 270 | 220 | 180 | 230 | 210 | 190 | 245 | 205 | 160 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 | 220 | 205 | 180 | 310 | 275 | 250 | 205 | 185 | 160 | – | – | – | 205 | 175 | 145 | – | – | – | – | – | – | |
| 6 | 200 | 150 | 120 | 190 | 160 | 130 | 180 | 140 | 110 | – | – | – | 180 | 130 | 95 | – | – | – | – | – | – | |
| M | 1 | 245 | 215 | 200 | 245 | 220 | 185 | 235 | 205 | 185 | 270 | 240 | 220 | 250 | 205 | 170 | – | – | – | – | – | – |
| 2 | 220 | 190 | 155 | 220 | 190 | 170 | 210 | 180 | 150 | 245 | 215 | 175 | 215 | 175 | 145 | – | – | – | – | – | – | |
| 3 | 170 | 145 | 115 | 175 | 155 | 140 | 155 | 140 | 110 | 185 | 160 | 125 | 175 | 130 | 100 | – | – | – | – | – | – | |
| K | 1 | 275 | 245 | 220 | 355 | 320 | 290 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 215 | 190 | 180 | 280 | 250 | 230 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 180 | 160 | 145 | 235 | 210 | 190 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 2400 | 1440 | 1200 | 2400 | 1440 | 1200 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1640 | 980 | 800 | 1640 | 980 | 800 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 960 | 600 | 480 | 960 | 600 | 480 | |
| S | 1 | 50 | 40 | 30 | – | – | – | 50 | 40 | 35 | 55 | 50 | 35 | 50 | 40 | 30 | – | – | – | – | – | – |
| 2 | 50 | 40 | 30 | – | – | – | 50 | 40 | 35 | 55 | 50 | 35 | 50 | 40 | 30 | – | – | – | – | – | – | |
| 3 | 60 | 50 | 30 | – | – | – | 60 | 50 | 35 | 65 | 55 | 35 | 60 | 50 | 30 | – | – | – | – | – | – | |
| 4 | 85 | 60 | 40 | 80 | 60 | 40 | 80 | 60 | 40 | 100 | 70 | 50 | 70 | 60 | 35 | – | – | – | – | – | – | |
| H | 1 | 145 | 110 | 85 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | TN6510 | TN6520 | TN6525 | TN6540 | TN7535 | WK15CM | |||||||||||||
| P | 1 | – | – | – | – | – | – | 1340 | 1045 | 925 | 1180 | 925 | 785 | 1790 | 1555 | 1460 | – | – | – |
| 2 | – | – | – | – | – | – | 1045 | 830 | 710 | 830 | 630 | 550 | 1105 | 1000 | 905 | – | – | – | |
| 3 | – | – | – | – | – | – | 925 | 710 | 610 | 710 | 550 | 450 | 1000 | 905 | 805 | – | – | – | |
| 4 | – | – | – | – | – | – | 770 | 550 | 475 | 590 | 430 | 355 | 750 | 690 | 630 | – | – | – | |
| 5 | – | – | – | – | – | – | 1025 | 770 | 650 | 785 | 590 | 490 | 1025 | 905 | 830 | – | – | – | |
| 6 | – | – | – | – | – | – | 670 | 535 | 430 | 535 | 395 | 335 | 630 | 535 | 430 | – | – | – | |
| M | 1 | – | – | – | – | – | – | 630 | 395 | 260 | 430 | 260 | 200 | 805 | 725 | 610 | – | – | – |
| 2 | – | – | – | – | – | – | 395 | 260 | 155 | 260 | 155 | 140 | 725 | 630 | 550 | – | – | – | |
| 3 | – | – | – | – | – | – | 415 | 260 | 180 | 275 | 155 | 140 | 570 | 510 | 450 | – | – | – | |
| K | 1 | 1570 | 1140 | 845 | 1475 | 1045 | 750 | 905 | 805 | 725 | 725 | 670 | 590 | 1165 | 1045 | 940 | 1655 | 1520 | 1340 |
| 2 | 1380 | 925 | 670 | 1280 | 830 | 630 | 710 | 630 | 590 | 570 | 510 | 450 | 925 | 830 | 750 | 1320 | 1165 | 1080 | |
| 3 | 1105 | 845 | 650 | 985 | 750 | 535 | 590 | 535 | 475 | 510 | 475 | 415 | 770 | 690 | 630 | 1105 | 985 | 905 | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| S | 1 | – | – | – | – | – | – | – | – | – | 155 | 120 | 95 | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | 80 | 60 | 40 | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | 235 | 140 | 95 | – | – | – | – | – | – | |
| 4 | – | – | – | – | – | – | – | – | – | 200 | 95 | 80 | – | – | – | – | – | – | |
| H | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Material Group | WP25PM | WP35CM | WS30PM | WP40PM | TN6501 | THM-U | |||||||||||||
| P | 1 | 1295 | 1120 | 1060 | 1790 | 1555 | 1460 | – | – | – | 1165 | 1025 | 965 | – | – | – | – | – | – |
| 2 | 1080 | 940 | 785 | 1105 | 1000 | 905 | – | – | – | 985 | 845 | 710 | – | – | – | – | – | – | |
| 3 | 1000 | 845 | 690 | 1000 | 905 | 805 | – | – | – | 905 | 770 | 630 | – | – | – | – | – | – | |
| 4 | 890 | 725 | 590 | 750 | 690 | 630 | – | – | – | 805 | 670 | 535 | – | – | – | – | – | – | |
| 5 | 725 | 670 | 590 | 1025 | 905 | 830 | – | – | – | 670 | 610 | 535 | – | – | – | – | – | – | |
| 6 | 650 | 490 | 395 | 630 | 535 | 430 | – | – | – | 590 | 450 | 355 | – | – | – | – | – | – | |
| M | 1 | 805 | 710 | 650 | 805 | 725 | 610 | 890 | 785 | 725 | 770 | 670 | 610 | – | – | – | – | – | – |
| 2 | 725 | 630 | 510 | 725 | 630 | 550 | 805 | 710 | 570 | 690 | 590 | 490 | – | – | – | – | – | – | |
| 3 | 550 | 475 | 370 | 570 | 510 | 450 | 610 | 535 | 415 | 510 | 450 | 355 | – | – | – | – | – | – | |
| K | 1 | 905 | 805 | 725 | 1165 | 1045 | 940 | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | 710 | 630 | 590 | 925 | 830 | 750 | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | 590 | 535 | 475 | 770 | 690 | 630 | – | – | – | – | – | – | – | – | – | – | – | – | |
| N | 1 | – | – | – | – | – | – | – | – | – | – | – | – | 7870 | 4720 | 3935 | 7870 | 4720 | 3935 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | 5370 | 3210 | 2615 | 5370 | 3210 | 2615 | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | 3150 | 1970 | 1570 | 3150 | 1970 | 1570 | |
| S | 1 | 155 | 140 | 95 | – | – | – | 180 | 155 | 120 | 155 | 140 | 120 | – | – | – | – | – | – |
| 2 | 155 | 140 | 95 | – | – | – | 180 | 155 | 120 | 155 | 140 | 120 | – | – | – | – | – | – | |
| 3 | 200 | 155 | 95 | – | – | – | 215 | 180 | 120 | 200 | 155 | 120 | – | – | – | – | – | – | |
| 4 | 275 | 200 | 140 | 260 | 200 | 130 | 335 | 235 | 155 | 260 | 200 | 140 | – | – | – | – | – | – | |
| H | 1 | 475 | 355 | 275 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
| 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
Coated carbide grade TN6510 has a PVD-TiAlN multilayer. It performs well in light to medium
machining of all cast irons.
Grade TN6520 has a PVD-TiAlN multilayer. It is engineeered for light and medium machining of all
types of cast irons.
Carbide grade TN6525 has aPVD-TiAlN multilayer. It is ideal for light and medium machining
applications in steels and high-strength nodular cast irons.
Coated carbide grade TN6540 has a PVD-TiAlN multilayer and is excellent for medium and heavy
machining applications. It is ideal for use in all steels and nodular cast irons.
