| SAP Material Number | 5649102 |
| ISO Catalog Number | SNMX150612ZNSNMM |
| ANSI Catalog Number | SNMX150612ZNSNMM |
| Grade | WK15CM |
| Cutting Edges per Insert | 8 |
| [D] Insert IC Size | 15.8750 mm |
| [D] Insert IC Size | .6250 in |
| [L10] Insert Cutting Edge Length | 15.8750 mm |
| [L10] Insert Cutting Edge Length | .6250 in |
| [S] Insert Thickness | 6.3500 mm |
| [S] Insert Thickness | .2500 in |
| [BS] Corner Facet Length | 2.3690 mm |
| [BS] Corner Facet Length | .0933 in |
| [Rε] Corner Radius | 1.2000 mm |
| [Rε] Corner Radius | .0472 in |
| Average Chip Thickness [HM] | 0.0500 mm |
| Average Chip Thickness [HM] | .0020 in |
| Light Machining | General Purpose | Heavy Machining | ||||
| Material Group | Geometry | Grade | Geometry | Grade | Geometry | Grade |
| P1–P2 | .S..MM | WP35CM | .S..MM | WP35CM | .S..MM | WU20PM |
| P3–P4 | .S..MM | WP35CM | .S..MM | WP35CM | .S..MM | WU20PM |
| P5–P6 | .S..MM | WP35CM | .S..MM | WP35CM | .S..MM | WP35CM |
| M1–M2 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| M3 | .S..MM | WP35CM | .S..MM | WP35CM | .S..MM | WP35CM |
| K1–K2 | .S..MM | WK15CM | .S..MM | WK15CM | .S..MM | WU20PM |
| K3 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WK15CM |
| N1–N2 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| N3 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| S1–S2 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| S3 | .S..MM | WU20PM | .S..MM | WU20PM | .S..MM | WU20PM |
| S4 | .S..MM | WP35CM | .S..MM | WU20PM | .S..MM | WU20PM |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40–100% | ||||||||||||
| .S..MM | 0,22 | 0,65 | 1,07 | 0,16 | 0,47 | 0,77 | 0,12 | 0,35 | 0,58 | 0,10 | 0,31 | 0,50 | 0,10 | 0,28 | 0,46 | .S..MM |
| Light Machining | General Purpose | Heavy Machining |
| Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
| 5% | 10% | 20% | 30% | 40-100% | ||||||||||||
| .S..MM | .008 | .026 | .042 | .006 | .018 | .030 | .005 | .014 | .023 | .004 | .012 | .020 | .004 | .011 | .018 | .S..MM |
| Light Machining | General Purpose | Heavy Machining |
| Material Group | WP35CM | WK15CM | WU20PM | |||||||
| P | 1 | 455 | 395 | 370 | — | — | — | 330 | 290 | 270 |
| 2 | 280 | 255 | 230 | — | — | — | 275 | 250 | 200 | |
| 3 | 255 | 230 | 205 | — | — | — | 255 | 220 | 175 | |
| 4 | 190 | 175 | 160 | — | — | — | 225 | 190 | 150 | |
| 5 | 260 | 230 | 210 | — | — | — | 185 | 175 | 150 | |
| 6 | 160 | 135 | — | — | — | — | 165 | 130 | 100 | |
| M | 1 | 205 | 185 | 155 | — | — | — | 205 | 180 | 165 |
| 2 | 185 | 160 | 140 | — | — | — | 185 | 160 | 130 | |
| 3 | 145 | 130 | 115 | — | — | — | 140 | 120 | 95 | |
| K | 1 | 295 | 265 | 240 | 420 | 385 | 340 | 250 | 220 | 185 |
| 2 | 235 | 210 | 190 | 335 | 295 | 275 | 200 | 180 | 150 | |
| 3 | 195 | 175 | 160 | 280 | 250 | 230 | 180 | 150 | 120 | |
| N | 1 | — | — | — | — | — | — | 550 | 470 | 400 |
| 2 | — | — | — | — | — | — | 550 | 470 | 400 | |
| 3 | — | — | — | — | — | — | 400 | 350 | 300 | |
| S | 1 | — | — | — | — | — | — | 40 | 35 | 25 |
| 2 | — | — | — | — | — | — | 40 | 35 | 25 | |
| 3 | — | — | — | — | — | — | 50 | 40 | 25 | |
| 4 | — | — | — | — | — | — | 70 | 50 | 35 | |
| H | 1 | — | — | — | — | — | — | 110 | 80 | 70 |
| Material Group | WP35CM | WK15CM | WU20PM | |||||||
| P | 1 | 1490 | 1300 | 1210 | — | — | — | 1080 | 950 | 890 |
| 2 | 920 | 840 | 750 | — | — | — | 900 | 820 | 660 | |
| 3 | 840 | 750 | 670 | — | — | — | 840 | 720 | 570 | |
| 4 | 620 | 570 | 520 | — | — | — | 740 | 620 | 490 | |
| 5 | 850 | 750 | 690 | — | — | — | 610 | 570 | 490 | |
| 6 | 520 | 440 | — | — | — | — | 540 | 430 | 330 | |
| M | 1 | 670 | 610 | 510 | — | — | — | 670 | 590 | 540 |
| 2 | 610 | 520 | 460 | — | — | — | 610 | 520 | 430 | |
| 3 | 480 | 430 | 380 | — | — | — | 460 | 390 | 310 | |
| K | 1 | 970 | 870 | 790 | 1380 | 1260 | 1120 | 820 | 720 | 610 |
| 2 | 770 | 690 | 620 | 1100 | 970 | 900 | 660 | 590 | 490 | |
| 3 | 640 | 570 | 520 | 920 | 820 | 750 | 590 | 490 | 390 | |
| N | 1 | — | — | — | — | — | — | 1800 | 1540 | 1310 |
| 2 | — | — | — | — | — | — | 1800 | 1540 | 1310 | |
| 3 | — | — | — | — | — | — | 1310 | 1150 | 980 | |
| S | 1 | — | — | — | — | — | — | 130 | 110 | 80 |
| 2 | — | — | — | — | — | — | 130 | 110 | 80 | |
| 3 | — | — | — | — | — | — | 160 | 130 | 80 | |
| 4 | — | — | — | — | — | — | 230 | 160 | 110 | |
| H | 1 | — | — | — | — | — | — | 360 | 260 | 230 |
Katalogové číslo ISO
Katalogové číslo ANSI
to find similar products.Vyberte soubory, které hledáte, a stáhněte je všechny najednou
. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.
Minimum quantity should be
| SAP Material Number | Katalogové číslo ISO | Karbid |
|---|
You are about to leave the Solution building process.
Are you sure you want to leave?
