Copy Mills • M100™ • IC16

Inserts • RDMT-TX

Features and benefits

Precision pressed positive geometry for lower cutting forces.

First choice for general machining, stainless steel, and high-temp alloys in roughing operations.

Product specifications

Product #	2207645
ISO Catalog Number	RDMT1605M0TX
ANSI Catalog Number	RDMT1605M0TX
Grade	TN7535
Insert Num of Cutting Edges	1
[D] Insert IC Size Metric	16
[D] Insert IC Size Inch	.6299
[S] Insert Thickness Metric	5,560
[S] Insert Thickness Inch	.2189
Average Chip Thickness [HM]	0,180
Average Chip Thickness [HM]	.0071

Need help? Contact our customer service team.

RDMT-TX

Filter By:

Product #	ISO Catalog Number	ANSI Catalog Number	Grade	Insert Num of Cutting Edges	[D] Insert IC Size Metric	[D] Insert IC Size Inch	[S] Insert Thickness Metric	[S] Insert Thickness Inch	Average Chip Thickness [HM]	Average Chip Thickness [HM]
2020767	RDMT1605M0TX	RDMT1605M0TX	TN7525	1	16	.6299	5,560	.2189	0,180	.0071
2207645	RDMT1605M0TX	RDMT1605M0TX	TN7535	1	16	.6299	5,560	.2189	0,180	.0071

Insert Selection Guide

	LightMachining		GeneralPurpose		HeavyMachining
Material Group	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	RDMT-TX	TN6525	RDMT-TX	TN6540	RDMT-TX	TN6540
P3–P4	RDMT-TX	TN6525	RDMW-TX	TN6540	RDMW-TX	TN6540
P5–P6	RDMT-TX	TN7525	RDMT-TX	TN7535	RDMT-TX	TN7535
M1–M2	RDMT-TX	TN6525	RDMT-TX	TN6540	RDMT-TX	TN6540
M3	RDMT-TX	TN6525	RDMT-TX	TN6540	RDMT-TX	TN6540
K1–K2	RDMW-TX	TN2510	RDMW-TX	TN7535	RDMW-TX	TN7535
K3	RDMW-TX	TN2510	RDMW-TX	TN7535	RDMW-TX	TN7535
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	–	–	RDMT-TX	TN6540	–	–
S3	–	–	RDMT-TX	TN6540	–	–
S4	–	–	RDMT-TX	TN6540	RDMT-TX	TN6540
H1	RDMW-TX	TN2510	RDMW-TX	TN2510	–	–

Insert Selection Guide

	LightMachining		GeneralPurpose		HeavyMachining
Material Group	Geometry	Grade	Geometry	Grade	Geometry	Grade
P1–P2	...TX	TN6525	...43M	TN6540	...43M	TN6540
P3–P4	...TX	TN6525	...TX	TN6540	...43M	TN6540
P5–P6	...TX	TN6525	...TX	TN7535	...TX	TN7535
M1–M2	...TX	TN6525	...TX	TN6540	...TX	TN6540
M3	...TX	TN6525	...TX	TN6540	...TX	TN6540
K1–K2	...43	TN2510	...TX	WK15CM	...TX	WK15CM
K3	...TX	TN6525	...TX	WK15CM	...TX	WK15CM
N1–N2	–	–	–	–	–	–
N3	–	–	–	–	–	–
S1–S2	–	–	–	–	–	–
S3	–	–	–	–	–	–
S4	...43M	TN6540	...TX	TN6540	...TX	TN6540
H1	–	–	...TX	TN2510	–	–

Insert Geometry	Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40100%
RDHX-TX	0,11	0,35	0,70	0,08	0,25	0,50	0,06	0,19	0,38	0,05	0,16	0,33	0,05	0,15	0,30	RDHX-TX
RDMT-TX	0,23	0,42	0,84	0,17	0,30	0,60	0,13	0,23	0,45	0,11	0,20	0,39	0,10	0,18	0,36	RDMT-TX
RDMW-TX	0,23	0,52	1,05	0,17	0,38	0,76	0,13	0,28	0,56	0,11	0,25	0,49	0,10	0,23	0,45	RDMW-TX

Insert Geometry	Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40100%
RDHX-TX	0,13	0,40	0,81	0,10	0,29	0,58	0,07	0,22	0,43	0,06	0,19	0,38	0,06	0,17	0,35	RDHX-TX
RDMT-TX	0,27	0,48	0,97	0,19	0,35	0,70	0,14	0,26	0,52	0,13	0,23	0,45	0,12	0,21	0,42	RDMT-TX
RDMW-TX	0,27	0,60	1,22	0,19	0,44	0,87	0,14	0,33	0,65	0,13	0,28	0,57	0,12	0,26	0,52	RDMW-TX

Insert Geometry	Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40100%
RDHX-TX	0,17	0,53	1,06	0,13	0,38	0,76	0,09	0,28	0,57	0,08	0,25	0,50	0,08	0,23	0,45	RDHX-TX
RDMT-TX	0,35	0,63	1,28	0,25	0,46	0,92	0,19	0,34	0,68	0,17	0,30	0,59	0,15	0,27	0,54	RDMT-TX
RDMW-TX	0,35	0,79	1,61	0,25	0,57	1,15	0,19	0,43	0,85	0,17	0,37	0,74	0,15	0,34	0,68	RDMW-TX

Insert Geometry	Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40100%
RDHX-TX	0,24	0,72	1,46	0,17	0,52	1,04	0,13	0,39	0,78	0,11	0,34	0,68	0,10	0,31	0,62	RDHX-TX
RDMT-TX	0,48	0,87	1,76	0,35	0,62	1,26	0,26	0,47	0,93	0,23	0,41	0,81	0,21	0,37	0,74	RDMT-TX
RDMW-TX	0,48	1,09	2,22	0,35	0,78	1,58	0,26	0,58	1,17	0,23	0,51	1,02	0,21	0,46	0,93	RDMW-TX

LightMachining

GeneralPurpose

HeavyMachining

Insert Geometry	Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40100%
...43	0,46	0,60	0,93	0,33	0,44	0,67	0,25	0,33	0,50	0,22	0,28	0,44	0,20	0,26	0,40	...43
...TX	0,46	0,70	1,12	0,33	0,50	0,81	0,25	0,38	0,60	0,22	0,33	0,52	0,20	0,30	0,48	...TX

Insert Geometry	Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40100%
...43	0,54	0,70	1,08	0,39	0,50	0,78	0,29	0,38	0,58	0,25	0,33	0,50	0,23	0,30	0,46	...43
...TX	0,54	0,81	1,30	0,39	0,58	0,93	0,29	0,43	0,69	0,25	0,38	0,61	0,23	0,35	0,55	...TX

Insert Geometry	Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40100%
...43	0,70	0,92	1,42	0,51	0,66	1,02	0,38	0,49	0,76	0,33	0,43	0,66	0,30	0,39	0,60	...43
...TX	0,70	1,06	1,72	0,51	0,76	1,23	0,38	0,57	0,91	0,33	0,50	0,79	0,30	0,45	0,73	...TX

Insert Geometry	Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40100%
...43	0,96	1,26	1,97	0,69	0,90	1,40	0,52	0,67	1,04	0,45	0,59	0,90	0,41	0,54	0,83	...43
...TX	0,96	1,46	2,38	0,69	1,04	1,68	0,52	0,78	1,25	0,45	0,68	1,08	0,41	0,62	0,99	...TX

LightMachining

GeneralPurpose

HeavyMachining

Insert Geometry	Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40100%
RDHX-TX	.005	.014	.027	.003	.010	.020	.002	.007	.015	.002	.006	.013	.002	.006	.012	RDHX-TX
RDMT-TX	.009	.016	.033	.007	.012	.024	.005	.009	.018	.004	.008	.016	.004	.007	.014	RDMT-TX
RDMW-TX	.009	.020	.041	.007	.015	.030	.005	.011	.022	.004	.010	.019	.004	.009	.018	RDMW-TX

Insert Geometry	Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40100%
RDHX-TX	.005	.016	.032	.004	.011	.023	.003	.008	.017	.002	.007	.015	.002	.007	.014	RDHX-TX
RDMT-TX	.010	.019	.038	.008	.014	.028	.006	.010	.021	.005	.009	.018	.005	.008	.016	RDMT-TX
RDMW-TX	.010	.024	.048	.008	.017	.034	.006	.013	.026	.005	.011	.022	.005	.010	.020	RDMW-TX

Insert Geometry	Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40100%
RDHX-TX	.007	.021	.042	.005	.015	.030	.004	.011	.022	.003	.010	.019	.003	.009	.018	RDHX-TX
RDMT-TX	.014	.025	.050	.010	.018	.036	.007	.013	.027	.006	.012	.023	.006	.011	.021	RDMT-TX
RDMW-TX	.014	.031	.063	.010	.022	.045	.007	.017	.034	.006	.015	.029	.006	.013	.027	RDMW-TX

Insert Geometry	Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40100%
RDHX-TX	.009	.028	.057	.007	.020	.041	.005	.015	.030	.004	.013	.027	.004	.012	.024	RDHX-TX
RDMT-TX	.019	.034	.070	.014	.025	.050	.010	.018	.037	.009	.016	.032	.008	.015	.029	RDMT-TX
RDMW-TX	.019	.043	.088	.014	.031	.062	.010	.023	.046	.009	.020	.040	.008	.018	.037	RDMW-TX

LightMachining

GeneralPurpose

HeavyMachining

Insert Geometry	Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40100%
...43	.018	.024	.037	.013	.017	.027	.010	.013	.020	.009	.011	.017	.008	.010	.016	...43
...TX	.018	.027	.044	.013	.020	.032	.010	.015	.024	.009	.013	.021	.008	.012	.019	...TX

Insert Geometry	Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40100%
...43	.021	.028	.043	.015	.020	.031	.011	.015	.023	.010	.013	.020	.009	.012	.018	...43
...TX	.021	.032	.051	.015	.023	.037	.011	.017	.027	.010	.015	.024	.009	.014	.022	...TX

Insert Geometry	Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40100%
...43	.028	.036	.056	.020	.026	.040	.015	.019	.030	.013	.017	.026	.012	.016	.024	...43
...TX	.028	.042	.067	.020	.030	.048	.015	.022	.036	.013	.019	.031	.012	.018	.028	...TX

Insert Geometry	Programmed Feed per Tooth (fz) as a % of Radial Depth of Cut (ae)															Insert Geometry
	5%			10%			20%			30%			40100%
...43	.038	.050	.078	.027	.036	.055	.020	.027	.041	.018	.023	.036	.016	.021	.033	...43
...TX	.038	.058	.093	.027	.041	.066	.020	.031	.049	.018	.027	.042	.016	.024	.039	...TX

LightMachining

GeneralPurpose

HeavyMachining

Recommended Starting Speeds [m/min]

Material Group		TN2510			TN6525			TN6540			TN7525			TN7535			TTI25
P	1	660	580	540	410	320	280	360	280	240	410	310	280	545	475	445	430	360	300
	2	410	370	330	320	250	215	250	190	170	310	250	215	335	305	275	310	250	215
	3	370	330	305	280	215	185	215	170	140	280	215	185	305	275	245	310	250	215
	4	275	260	230	235	170	145	180	130	110	235	170	145	230	210	190	265	215	180
	5	330	300	275	310	235	200	240	180	150	310	235	200	310	275	250	320	235	200
	6	230	205	175	205	160	130	160	120	100	205	160	130	190	160	130	145	110	90
M	1	270	240	210	190	120	80	130	80	60	245	220	185	245	220	185	480	310	215
	2	245	210	190	120	80	50	80	50	40	220	190	170	220	190	170	325	205	145
	3	190	175	150	125	80	55	85	50	40	175	155	140	175	155	140	320	210	145
K	1	420	360	300	275	245	220	220	205	180	380	280	240	355	320	290	220	185	155
	2	360	300	250	215	190	180	175	155	140	325	240	200	280	250	230	180	145	125
	3	300	250	200	180	160	145	155	145	125	240	200	170	235	210	190	145	125	100
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	50	35	30	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	25	20	10	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	70	40	30	–	–	–	–	–	–	–	–	–
	4	–	–	–	–	–	–	60	30	25	–	–	–	–	–	–	–	–	–
H	1	145	110	70	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	145	110	70	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	115	80	45	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Recommended Starting Speeds [m/min]

Material Group		TN2510			TN6525			TN6540			TN7525			TN7535			WK15CM
P	1	660	580	540	410	320	280	360	280	240	410	310	280	545	475	445	–	–	–
	2	410	370	330	320	250	215	250	190	170	310	250	215	335	305	275	–	–	–
	3	370	330	305	280	215	185	215	170	140	280	215	185	305	275	245	–	–	–
	4	275	260	230	235	170	145	180	130	110	235	170	145	230	210	190	–	–	–
	5	330	300	275	310	235	200	240	180	150	310	235	200	310	275	250	–	–	–
	6	230	205	175	205	160	130	160	120	100	205	160	130	190	160	130	–	–	–
M	1	270	240	210	190	120	80	130	80	60	245	220	185	245	220	185	–	–	–
	2	245	210	190	120	80	50	80	50	40	220	190	170	220	190	170	–	–	–
	3	190	175	150	125	80	55	85	50	40	175	155	140	175	155	140	–	–	–
K	1	420	360	300	275	245	220	220	205	180	380	280	240	355	320	290	505	460	410
	2	360	300	250	215	190	180	175	155	140	325	240	200	280	250	230	400	355	330
	3	300	250	200	180	160	145	155	145	125	240	200	170	235	210	190	335	300	275
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	50	35	30	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	25	20	10	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	70	40	30	–	–	–	–	–	–	–	–	–
	4	–	–	–	–	–	–	60	30	25	–	–	–	–	–	–	–	–	–
H	1	145	110	70	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	145	110	70	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	115	80	45	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Recommended Starting Speeds [SFM]

Material Group		TN2510			TN6525			TN6540			TN7525			TN7535			TTI25
P	1	2165	1910	1770	1340	1045	925	1180	925	785	1340	1025	925	1790	1555	1460	1415	1180	985
	2	1340	1220	1080	1045	830	710	830	630	550	1025	830	710	1105	1000	905	1025	830	710
	3	1220	1080	1000	925	710	610	710	550	450	925	710	610	1000	905	805	1025	830	710
	4	905	845	750	770	550	475	590	430	355	770	550	475	750	690	630	865	710	590
	5	1080	985	905	1025	770	650	785	590	490	1025	770	650	1025	905	830	1045	770	650
	6	750	670	570	670	535	430	535	395	335	670	535	430	630	535	430	475	355	295
M	1	890	785	690	630	395	260	430	260	200	805	725	610	805	725	610	1570	1025	710
	2	805	690	630	395	260	155	260	155	140	725	630	550	725	630	550	1060	670	475
	3	630	570	490	415	260	180	275	155	140	570	510	450	570	510	450	1045	690	475
K	1	1380	1180	985	905	805	725	725	670	590	1240	925	785	1165	1045	940	725	610	510
	2	1180	985	830	710	630	590	570	510	450	1060	785	650	925	830	750	590	475	415
	3	985	830	650	590	535	475	510	475	415	785	650	550	770	690	630	475	415	335
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	155	120	95	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	80	60	40	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	235	140	95	–	–	–	–	–	–	–	–	–
	4	–	–	–	–	–	–	200	95	80	–	–	–	–	–	–	–	–	–
H	1	475	360	230	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	475	360	230	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	380	260	150	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Recommended Starting Speeds [SFM]

Material Group		TN2510			TN6525			TN6540			TN7525			TN7535			WK15CM
P	1	2165	1910	1770	1340	1045	925	1180	925	785	1340	1025	925	1790	1555	1460	–	–	–
	2	1340	1220	1080	1045	830	710	830	630	550	1025	830	710	1105	1000	905	–	–	–
	3	1220	1080	1000	925	710	610	710	550	450	925	710	610	1000	905	805	–	–	–
	4	905	845	750	770	550	475	590	430	355	770	550	475	750	690	630	–	–	–
	5	1080	985	905	1025	770	650	785	590	490	1025	770	650	1025	905	830	–	–	–
	6	750	670	570	670	535	430	535	395	335	670	535	430	630	535	430	–	–	–
M	1	890	785	690	630	395	260	430	260	200	805	725	610	805	725	610	–	–	–
	2	805	690	630	395	260	155	260	155	140	725	630	550	725	630	550	–	–	–
	3	630	570	490	415	260	180	275	155	140	570	510	450	570	510	450	–	–	–
K	1	1380	1180	985	905	805	725	725	670	590	1240	925	785	1165	1045	940	1655	1520	1340
	2	1180	985	830	710	630	590	570	510	450	1060	785	650	925	830	750	1320	1165	1080
	3	985	830	650	590	535	475	510	475	415	785	650	550	770	690	630	1105	985	905
N	1	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
S	1	–	–	–	–	–	–	155	120	95	–	–	–	–	–	–	–	–	–
	2	–	–	–	–	–	–	80	60	40	–	–	–	–	–	–	–	–	–
	3	–	–	–	–	–	–	235	140	95	–	–	–	–	–	–	–	–	–
	4	–	–	–	–	–	–	200	95	80	–	–	–	–	–	–	–	–	–
H	1	475	360	230	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	2	475	360	230	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–
	3	380	260	150	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Grades

TN7525

Coated carbide grade TN7525 has an MT-CVD-TiN-TiCN-Al203-TiN coating. Engineered for light
and medium machining of all steels and nodular cast irons.
TN7535