Produkt podobný k:
VSM17™ • Stopkové frézy s válcovou stopkou • Metrické
Stopkové frézy s válcovou stopkou (standardní a dlouhá provedení) • Metrické
Objednací číslo5988058
ISO katalogové IDVSM17D032Z03A32XD17L210ANSI katalogové IDVSM17D032Z03A32XD17L210
- P Steel
- M Stainless Steel
- K Cast Iron
- N Non-Ferrous
- S High-Temp Alloys
- H Hardened Materials
Face Milling
Helical Milling
Ramping: Blank
Slotting: Square End
Side Milling/Shoulder Milling: Square End
Shank - Cylindrical Plain
Milling - Through Coolant
Pocketing
Sending to {{cadTool}} in progress...
Downloaded file will be available after import in the {{cadTool}} tool library.
- Přehled
- Řezné podmínky
- Stahování
- Kompatibilní díly strana stroje
- Kompatibilní díly strana obrobku
- Náhradní díly
- Posouzení
- Otázky A Odpovědi
Objednací číslo | 5988058 |
ISO katalogové ID | VSM17D032Z03A32XD17L210 |
ANSI katalogové ID | VSM17D032Z03A32XD17L210 |
[D1] Effective Cutting Diameter | 32 mm |
[D1] Effective Cutting Diameter | 1.26 in |
[D] Adapter / Shank / Bore Diameter | 32 mm |
[D] Adapter / Shank / Bore Diameter | 1.26 in |
[L] Overall Length | 210 mm |
[L] Overall Length | 8.268 in |
[L2] Head Length | 50 mm |
[L2] Head Length | 1.969 in |
[AP1MAX] 1st Maximum Cutting Depth | 16.3 mm |
[AP1MAX] 1st Maximum Cutting Depth | .641 in |
Number of Inserts | 3 |
Maximum Ramping Angle | 5.7 |
Max RPM | 34700 |
Coolant Supply | Y |
Weight Kilograms | 1.13 |
Materiály obrobků
- Steel
- Stainless Steel
- Cast Iron
- Non-Ferrous
- High-Temp Alloys
- Hardened Materials
Použití
Face Milling
Helical Milling
Ramping: Blank
Slotting: Square End
Side Milling/Shoulder Milling: Square End
Shank - Cylindrical Plain
Milling - Through Coolant
Pocketing
Vlastnosti a výhody
- Skutečné 90° stěny.
- Větší možnosti při zavrtávání.
- Vynikající jakost stěn a povrchů.
- Účinné vnitřní chlazení s přesným zacílením na řeznou hranu.
Vytvořit řešení pro výpočet posuvů a rychlosti
Po vytvoření řešení stačí vybrat ikonu Posuvy & Rychlosti a náš systém poskytne doporučení. Informace můžete upravit přidáním zařízení a specifikací nebo provést úpravy pomocí posuvníků.
Výběr břitové destičky
Výběr břitové destičky
Light | General | Universal | Heavy | |||||
Material | Geometry | Grade | Geometry | Grade | Geometry | Grade | Geometry | Grade |
P1–P2 | XDCT-ML | WP40PM | XDPT-MM | WP40PM | XD..-MU | WU20PM | XDPT-MH | WP40PM |
P3–P4 | XDCT-ML | WP40PM | XDPT-MM | WP40PM | XD..-MU | WU20PM | XDPT-MH | WP40PM |
P5–P6 | XDPT-MM | WP25PM | XDPT-MM | WP35CM | XD..-MU | WU20PM | XDPT-MH | WP40PM |
M1–M2 | XDCT-ML | WS40PM | XDPT-MM | WS40PM | XD..-MU | WU20PM | XDPT-MM | WS40PM |
M3 | XDCT-ML | WS40PM | XDPT-MM | WS40PM | XD..-MU | WU20PM | XDPT-MH | WS40PM |
K1–K2 | XDPT-MM | WK15CM | XDPT-MM | WK15CM | XD..-MU | WU20PM | XDPT-MH | WK15CM |
K3 | XDPT-MM | WP35CM | XDPT-MM | WP35CM | XD..-MU | WU20PM | XDPT-MH | WP35CM |
N1–N2 | XDCT-ALP | WN10HM | XDCT-ALP | WN25PM | – | – | XDCT-ALP | WN25PM |
N3 | XDCT-ALP | WN10HM | XDCT-ALP | WN25PM | – | – | XDCT-ALP | WN25PM |
S1–S2 | XDCT-ML | WP25PM | XDPT-MM | WS40PM | XD..-MU | WU20PM | XDPT-MM | WS40PM |
S3 | XDCT-ML | WS40PM | XDPT-MM | WS40PM | XD..-MU | WU20PM | XDPT-MM | WS40PM |
S4 | XDCT-ML | WS40PM | XDPT-MM | WS40PM | XD..-MU | WU20PM | XDPT-MM | WS40PM |
H1 | – | – | – | – | XD..-MU | WU20PM | – | – |
Posuvy
Doporučené počáteční hodnoty posuvů [mm]
Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40 | ||||||||||||
.F..ALP | 0,12 | 0,23 | 0,40 | 0,08 | 0,17 | 0,29 | 0,06 | 0,13 | 0,22 | 0,06 | 0,11 | 0,19 | 0,05 | 0,10 | 0,18 | .F..ALP |
.E..ML | 0,16 | 0,35 | 0,46 | 0,12 | 0,25 | 0,33 | 0,09 | 0,19 | 0,25 | 0,08 | 0,16 | 0,22 | 0,07 | 0,15 | 0,20 | .E..ML |
.S..MM/.S..MU | 0,16 | 0,40 | 0,64 | 0,12 | 0,29 | 0,46 | 0,09 | 0,22 | 0,34 | 0,08 | 0,19 | 0,30 | 0,07 | 0,18 | 0,28 | .S..MM/.S..MU |
.S..MH | 0,23 | 0,46 | 0,74 | 0,17 | 0,33 | 0,54 | 0,13 | 0,25 | 0,40 | 0,11 | 0,22 | 0,35 | 0,10 | 0,20 | 0,32 | .S..MH |
Light | General | Heavy |
Recommended Starting Feeds [IPT]
Light | General | Heavy |
Insert Geometry | Programmed Feed per Tooth (fz) at a % of Radial Depth of Cut (ae) | Insert Geometry | ||||||||||||||
5% | 10% | 20% | 30% | 40 | ||||||||||||
.F..ALP | .005 | .009 | .016 | .003 | .007 | .012 | .003 | .005 | .009 | .002 | .004 | .008 | .002 | .004 | .007 | .F..ALP |
.E..ML | .007 | .014 | .019 | .005 | .010 | .013 | .004 | .008 | .010 | .003 | .007 | .009 | .003 | .006 | .008 | .E..ML |
.S..MM/.S..MU | .007 | .016 | .026 | .005 | .012 | .018 | .004 | .009 | .014 | .003 | .008 | .012 | .003 | .007 | .011 | .S..MM/.S..MU |
.S..MH | .009 | .019 | .030 | .007 | .013 | .021 | .005 | .010 | .016 | .004 | .009 | .014 | .004 | .008 | .013 | .S..MH |
Rychlosti
Doporučené počáteční řezné rychlosti [m/min]*
Material Group | WK15CM | WK15PM | WN10HM | WN25PM | WP25PM | |||||||||||
P | 1 | — | — | — | — | — | — | — | — | — | — | — | — | 330 | 285 | 270 |
2 | — | — | — | — | — | — | — | — | — | — | — | — | 275 | 240 | 200 | |
3 | — | — | — | — | — | — | — | — | — | — | — | — | 255 | 215 | 175 | |
4 | — | — | — | — | — | — | — | — | — | — | — | — | 225 | 185 | 150 | |
5 | — | — | — | — | — | — | — | — | — | — | — | — | 185 | 170 | 150 | |
6 | — | — | — | — | — | — | — | — | — | — | — | — | 165 | 125 | 100 | |
M | 1 | — | — | — | — | — | — | — | — | — | — | — | — | 205 | 180 | 165 |
2 | — | — | — | — | — | — | — | — | — | — | — | — | 185 | 160 | 130 | |
3 | — | — | — | — | — | — | — | — | — | — | — | — | 140 | 120 | 95 | |
K | 1 | 420 | 385 | 340 | 270 | 245 | 215 | — | — | — | — | — | — | 230 | 205 | 185 |
2 | 335 | 295 | 275 | 210 | 190 | 175 | — | — | — | — | — | — | 180 | 160 | 150 | |
3 | 280 | 250 | 230 | 175 | 160 | 145 | — | — | — | — | — | — | 150 | 135 | 120 | |
N | 1 | — | — | — | — | — | — | 795 | 695 | 600 | 1075 | 945 | 875 | — | — | — |
2 | — | — | — | — | — | — | 795 | 695 | 600 | 945 | 875 | 760 | — | — | — | |
3 | — | — | — | — | — | — | 560 | 485 | 420 | 945 | 875 | 760 | — | — | — | |
S | 1 | — | — | — | — | — | — | — | — | — | — | — | — | 40 | 35 | 25 |
2 | — | — | — | — | — | — | — | — | — | — | — | — | 40 | 35 | 25 | |
3 | — | — | — | — | — | — | — | — | — | — | — | — | 50 | 40 | 25 | |
4 | — | — | — | — | — | — | — | — | — | — | — | — | 70 | 50 | 35 | |
H | 1 | — | — | — | — | — | — | — | — | — | — | — | — | 120 | 90 | 70 |
Material Group | WP35CM | WP40PM | WS40PM | WU20PM | WU35PM | |||||||||||
P | 1 | 455 | 395 | 370 | 295 | 260 | 245 | — | — | — | 330 | 290 | 270 | 260 | 230 | 215 |
2 | 280 | 255 | 230 | 250 | 215 | 180 | — | — | — | 275 | 250 | 200 | 220 | 190 | 160 | |
3 | 255 | 230 | 205 | 230 | 195 | 160 | — | — | — | 255 | 220 | 175 | 200 | 170 | 140 | |
4 | 190 | 175 | 160 | 205 | 170 | 135 | — | — | — | 225 | 190 | 150 | 180 | 150 | 120 | |
5 | 260 | 230 | 210 | 170 | 155 | 135 | 170 | 145 | 120 | 185 | 175 | 150 | 150 | 135 | 120 | |
6 | 160 | 135 | 110 | 150 | 115 | 90 | 150 | 110 | 80 | 165 | 130 | 100 | 130 | 100 | 80 | |
M | 1 | 205 | 185 | 155 | 195 | 170 | 155 | 210 | 170 | 140 | 205 | 180 | 165 | 170 | 150 | 135 |
2 | 185 | 160 | 140 | 175 | 150 | 125 | 180 | 145 | 120 | 185 | 160 | 130 | 155 | 130 | 110 | |
3 | 145 | 130 | 115 | 130 | 115 | 90 | 145 | 110 | 85 | 140 | 120 | 95 | 115 | 100 | 80 | |
K | 1 | 295 | 265 | 240 | — | — | — | — | — | — | 250 | 220 | 185 | — | — | — |
2 | 235 | 210 | 190 | — | — | — | — | — | — | 200 | 180 | 150 | — | — | — | |
3 | 195 | 175 | 160 | — | — | — | — | — | — | 180 | 150 | 120 | — | — | — | |
N | 1 | — | — | — | — | — | — | — | — | — | 550 | 470 | 400 | — | — | — |
2 | — | — | — | — | — | — | — | — | — | 550 | 470 | 400 | — | — | — | |
3 | — | — | — | — | — | — | — | — | — | 400 | 350 | 300 | — | — | — | |
S | 1 | — | — | — | — | — | — | 40 | 35 | 25 | 40 | 35 | 25 | 35 | 30 | 25 |
2 | — | — | — | — | — | — | 40 | 35 | 25 | 40 | 35 | 25 | 35 | 30 | 25 | |
3 | — | — | — | — | — | — | 50 | 40 | 25 | 50 | 40 | 25 | 45 | 35 | 25 | |
4 | — | — | — | — | — | — | 60 | 50 | 30 | 70 | 50 | 35 | 60 | 45 | 30 | |
H | 1 | — | — | — | — | — | — | — | — | — | 110 | 80 | 70 | — | — | — |
Recommended Starting Speeds [SFM]*
Material Group | WK15CM | WK15PM | WN10HM | WN25PM | WP25PM | WP35CM | WP40PM | WS40PM | WU20PM | WU35PM | |||||||||||||||||||||
P | 1 | — | — | — | — | — | — | — | — | — | — | — | — | 1085 | 935 | 885 | 1495 | 1295 | 1215 | 970 | 855 | 805 | — | — | — | 1080 | 950 | 885 | 855 | 755 | 705 |
— | 2 | — | — | — | — | — | — | — | — | — | — | — | — | 900 | 785 | 655 | 920 | 835 | 755 | 820 | 705 | 590 | — | — | — | 900 | 820 | 655 | 720 | 625 | 525 |
— | 3 | — | — | — | — | — | — | — | — | — | — | — | — | 835 | 705 | 575 | 835 | 755 | 675 | 755 | 640 | 525 | — | — | — | 835 | 720 | 570 | 655 | 560 | 460 |
— | 4 | — | — | — | — | — | — | — | — | — | — | — | — | 740 | 605 | 490 | 625 | 575 | 525 | 675 | 560 | 445 | — | — | — | 735 | 620 | 490 | 590 | 490 | 395 |
— | 5 | — | — | — | — | — | — | — | — | — | — | — | — | 605 | 560 | 490 | 855 | 755 | 690 | 560 | 510 | 445 | 560 | 475 | 395 | 605 | 570 | 490 | 490 | 445 | 395 |
— | 6 | — | — | — | — | — | — | — | — | — | — | — | — | 540 | 410 | 330 | 525 | 445 | 360 | 490 | 375 | 295 | 490 | 360 | 260 | 540 | 425 | 325 | 425 | 330 | 260 |
M | 1 | — | — | — | — | — | — | — | — | — | — | — | — | 675 | 590 | 540 | 675 | 605 | 510 | 640 | 560 | 510 | 690 | 560 | 460 | 670 | 590 | 540 | 560 | 490 | 445 |
— | 2 | — | — | — | — | — | — | — | — | — | — | — | — | 605 | 525 | 425 | 605 | 525 | 460 | 575 | 490 | 410 | 590 | 475 | 395 | 605 | 520 | 425 | 510 | 425 | 360 |
— | 3 | — | — | — | — | — | — | — | — | — | — | — | — | 460 | 395 | 310 | 475 | 425 | 375 | 425 | 375 | 295 | 475 | 360 | 280 | 455 | 390 | 310 | 375 | 330 | 260 |
K | 1 | 1380 | 1265 | 1115 | 885 | 805 | 705 | — | — | — | — | — | — | 755 | 675 | 605 | 970 | 870 | 785 | — | — | — | — | — | — | 820 | 720 | 605 | — | — | — |
— | 2 | 1100 | 970 | 900 | 690 | 625 | 575 | — | — | — | — | — | — | 590 | 525 | 490 | 770 | 690 | 625 | — | — | — | — | — | — | 655 | 590 | 490 | — | — | — |
— | 3 | 920 | 820 | 755 | 575 | 525 | 475 | — | — | — | — | — | — | 490 | 445 | 395 | 640 | 575 | 525 | — | — | — | — | — | — | 590 | 490 | 390 | — | — | — |
N | 1 | — | — | — | — | — | — | 2605 | 2275 | 1965 | 3525 | 3100 | 2870 | — | — | — | — | — | — | — | — | — | — | — | — | 1800 | 1540 | 1310 | — | — | — |
— | 2 | — | — | — | — | — | — | 2605 | 2275 | 1965 | 3100 | 2870 | 2495 | — | — | — | — | — | — | — | — | — | — | — | — | 1800 | 1540 | 1310 | — | — | — |
— | 3 | — | — | — | — | — | — | 1835 | 1590 | 1375 | 3100 | 2870 | 2495 | — | — | — | — | — | — | — | — | — | — | — | — | 1310 | 1145 | 980 | — | — | — |
S | 1 | — | — | — | — | — | — | — | — | — | — | — | — | 130 | 115 | 80 | — | — | — | — | — | — | 130 | 115 | 80 | 130 | 110 | 80 | 115 | 100 | 80 |
— | 2 | — | — | — | — | — | — | — | — | — | — | — | — | 130 | 115 | 80 | — | — | — | — | — | — | 130 | 115 | 80 | 130 | 110 | 80 | 115 | 100 | 80 |
— | 3 | — | — | — | — | — | — | — | — | — | — | — | — | 165 | 130 | 80 | — | — | — | — | — | — | 165 | 130 | 80 | 160 | 130 | 80 | 150 | 115 | 80 |
— | 4 | — | — | — | — | — | — | — | — | — | — | — | — | 230 | 165 | 115 | — | — | — | — | — | — | 195 | 165 | 100 | 225 | 160 | 110 | 195 | 150 | 100 |
H | 1 | — | — | — | — | — | — | — | — | — | — | — | — | 395 | 295 | 230 | — | — | — | — | — | — | — | — | — | 360 | 260 | 225 | — | — | — |
CAD Drawings Models
Can’t find the file type you’re looking for?
Product data
I have read and accepted the Terms & Conditions of use