Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

WIDIA k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

Rychlá objednávka
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Výkonná nástrojová řešení v prodeji nyní. Objednejte nyní.

Vision Plus™

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (241)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(63)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(63)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(63)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(241)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(241)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(67)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(4)
    • M Stainless Steel (4)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(4)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(4)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(4)
    • K Cast Iron (67)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(67)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(67)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(4)
    • S High-Temp Alloys (4)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(4)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(4)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(4)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(4)
    • H Hardened Materials (241)
      • H1
        Hardened Materials 44-48 HRC(241)
      • H2
        Hardened Materials 48-55 HRC(241)
      • H3
        Hardened Materials 56-60 HRC(241)
      • H4
        Hardened Materials >60 HRC(169)
    Select All Star
    • US (9)
    Applications
    Applications
    • PocketPocket (168)
    • Pocket HelicalPocket Helical (168)
    • Pocket MillingPocket Milling (168)
    • Profile MillingProfile Milling (38)
    • RampingRamping (174)
    • Shoulder Ball NoseShoulder Ball Nose (38)
    • Shoulder MillingShoulder Milling (183)
    • Shoulder RoughingShoulder Roughing (1)
    • Shoulder Square EndShoulder Square End (145)
    • Slot Ball NoseSlot Ball Nose (38)
    • Slot MillingSlot Milling (115)
    • Slot Square EndSlot Square End (77)
    Cutting Diameter
    Cutting Diameter
    • 0.012 in(2)
    • 0.016 in(3)
    • 0.02 in(6)
    • 0.024 in(2)
    • 0.028 in(1)
    • 0.031 in(6)
    • 0.039 in(11)
    • 0.047 in(6)
    • 0.055 in(4)
    • 0.06 in(11)
    • 0.067 in(2)
    • 0.072 in(5)
    • 0.075 in(1)
    • 0.079 in(13)
    • 0.098 in(7)
    • 0.119 in(20)
    • 0.12 in(1)
    • 0.125 in(1)
    • 0.157 in(15)
    • 0.188 in(1)
    • 0.197 in(11)
    • 0.237 in(22)
    • 0.25 in(3)
    • 0.313 in(4)
    • 0.315 in(19)
    • 0.375 in(5)
    • 0.394 in(19)
    • 0.473 in(15)
    • 0.5 in(4)
    • 0.625 in(2)
    • 0.63 in(9)
    • 0.75 in(2)
    • 0.787 in(6)
    • 0.984 in(2)
    • 1.0 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 0.301 mm(2)
    • 0.4 mm(3)
    • 0.5 mm(6)
    • 0.601 mm(2)
    • 0.701 mm(1)
    • 0.8 mm(6)
    • 1.0 mm(11)
    • 1.201 mm(6)
    • 1.401 mm(4)
    • 1.5 mm(11)
    • 1.701 mm(2)
    • 1.8 mm(5)
    • 1.901 mm(1)
    • 2.0 mm(13)
    • 2.5 mm(7)
    • 3.0 mm(20)
    • 3.051 mm(1)
    • 3.176 mm(1)
    • 4.0 mm(15)
    • 4.775 mm(1)
    • 5.0 mm(11)
    • 6.0 mm(22)
    • 6.351 mm(3)
    • 7.95 mm(4)
    • 8.0 mm(19)
    • 9.525 mm(5)
    • 10.0 mm(19)
    • 12.0 mm(15)
    • 12.701 mm(4)
    • 15.875 mm(2)
    • 16.0 mm(9)
    • 19.05 mm(2)
    • 20.0 mm(6)
    • 25.0 mm(2)
    • 25.401 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 0.301 mm(1)
    • 0.4 mm(2)
    • 0.5 mm(1)
    • 0.601 mm(3)
    • 0.701 mm(4)
    • 0.8 mm(1)
    • 0.9 mm(1)
    • 1.0 mm(4)
    • 1.201 mm(5)
    • 1.3 mm(1)
    • 1.5 mm(9)
    • 1.6 mm(1)
    • 1.8 mm(4)
    • 2.0 mm(4)
    • 2.1 mm(4)
    • 2.301 mm(8)
    • 2.401 mm(1)
    • 2.5 mm(2)
    • 2.6 mm(2)
    • 2.7 mm(5)
    • 2.801 mm(1)
    • 3.0 mm(16)
    • 3.176 mm(1)
    • 3.2 mm(1)
    • 3.7 mm(6)
    • 4.0 mm(8)
    • 4.5 mm(13)
    • 4.775 mm(1)
    • 5.0 mm(4)
    • 6.0 mm(13)
    • 6.351 mm(1)
    • 7.5 mm(6)
    • 7.95 mm(1)
    • 8.0 mm(6)
    • 9.0 mm(12)
    • 9.525 mm(3)
    • 10.0 mm(4)
    • 12.0 mm(14)
    • 12.701 mm(2)
    • 13.0 mm(1)
    • 14.3 mm(1)
    • 15.0 mm(14)
    • 15.875 mm(1)
    • 16.0 mm(2)
    • 18.0 mm(10)
    • 19.05 mm(3)
    • 20.0 mm(2)
    • 21.0 mm(1)
    • 23.826 mm(1)
    • 24.0 mm(4)
    • 25.0 mm(2)
    • 28.0 mm(1)
    • 28.576 mm(1)
    • 30.0 mm(5)
    • 31.75 mm(1)
    • 33.35 mm(1)
    • 35.0 mm(1)
    • 39.7 mm(1)
    • 40.0 mm(2)
    • 42.0 mm(1)
    • 44.45 mm(1)
    • 45.0 mm(1)
    • 50.0 mm(1)
    • 55.575 mm(1)
    • 56.0 mm(1)
    • 63.0 mm(1)
    • 66.675 mm(1)
    • 70.0 mm(1)
    • 88.0 mm(1)
    • 88.9 mm(1)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.012 in(1)
    • 0.016 in(2)
    • 0.02 in(1)
    • 0.024 in(3)
    • 0.028 in(4)
    • 0.031 in(1)
    • 0.035 in(1)
    • 0.039 in(4)
    • 0.047 in(5)
    • 0.052 in(1)
    • 0.06 in(9)
    • 0.063 in(1)
    • 0.072 in(4)
    • 0.079 in(4)
    • 0.083 in(4)
    • 0.091 in(8)
    • 0.095 in(1)
    • 0.098 in(2)
    • 0.103 in(2)
    • 0.106 in(5)
    • 0.11 in(1)
    • 0.119 in(16)
    • 0.125 in(1)
    • 0.126 in(1)
    • 0.146 in(6)
    • 0.157 in(8)
    • 0.177 in(13)
    • 0.188 in(1)
    • 0.197 in(4)
    • 0.237 in(13)
    • 0.25 in(1)
    • 0.295 in(6)
    • 0.313 in(1)
    • 0.315 in(6)
    • 0.354 in(12)
    • 0.375 in(3)
    • 0.394 in(4)
    • 0.473 in(14)
    • 0.5 in(2)
    • 0.512 in(1)
    • 0.564 in(1)
    • 0.591 in(14)
    • 0.625 in(1)
    • 0.63 in(2)
    • 0.709 in(10)
    • 0.75 in(3)
    • 0.787 in(2)
    • 0.828 in(1)
    • 0.939 in(1)
    • 0.946 in(4)
    • 0.984 in(2)
    • 1.102 in(1)
    • 1.125 in(1)
    • 1.181 in(5)
    • 1.25 in(1)
    • 1.313 in(1)
    • 1.379 in(1)
    • 1.563 in(1)
    • 1.575 in(2)
    • 1.655 in(1)
    • 1.75 in(1)
    • 1.772 in(1)
    • 1.969 in(1)
    • 2.188 in(1)
    • 2.205 in(1)
    • 2.48 in(1)
    • 2.625 in(1)
    • 2.757 in(1)
    • 3.465 in(1)
    • 3.5 in(1)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 0.012 in(1)
    • 0.016 in(2)
    • 0.024 in(1)
    • 0.039 in(1)
    • 0.06 in(2)
    • 0.072 in(2)
    • 0.079 in(4)
    • 0.095 in(2)
    • 0.098 in(2)
    • 0.119 in(9)
    • 0.125 in(1)
    • 0.138 in(1)
    • 0.15 in(2)
    • 0.157 in(8)
    • 0.177 in(6)
    • 0.188 in(1)
    • 0.197 in(9)
    • 0.237 in(23)
    • 0.25 in(1)
    • 0.295 in(5)
    • 0.313 in(1)
    • 0.315 in(11)
    • 0.354 in(13)
    • 0.375 in(3)
    • 0.394 in(12)
    • 0.473 in(19)
    • 0.5 in(1)
    • 0.512 in(1)
    • 0.564 in(1)
    • 0.591 in(13)
    • 0.625 in(1)
    • 0.63 in(7)
    • 0.709 in(12)
    • 0.75 in(2)
    • 0.787 in(9)
    • 0.828 in(1)
    • 0.939 in(1)
    • 0.946 in(8)
    • 0.984 in(3)
    • 1.102 in(1)
    • 1.125 in(1)
    • 1.181 in(10)
    • 1.25 in(1)
    • 1.313 in(1)
    • 1.379 in(1)
    • 1.417 in(4)
    • 1.563 in(1)
    • 1.575 in(2)
    • 1.655 in(1)
    • 1.75 in(1)
    • 1.772 in(1)
    • 1.891 in(3)
    • 1.95 in(1)
    • 1.969 in(1)
    • 2.188 in(1)
    • 2.205 in(1)
    • 2.25 in(1)
    • 2.362 in(2)
    • 2.48 in(1)
    • 2.625 in(1)
    • 2.757 in(1)
    • 3.465 in(1)
    • 3.5 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 0.301 mm(1)
    • 0.4 mm(2)
    • 0.601 mm(1)
    • 1.0 mm(1)
    • 1.5 mm(2)
    • 1.8 mm(2)
    • 2.0 mm(4)
    • 2.401 mm(2)
    • 2.5 mm(2)
    • 3.0 mm(9)
    • 3.176 mm(1)
    • 3.5 mm(1)
    • 3.801 mm(2)
    • 4.0 mm(8)
    • 4.5 mm(6)
    • 4.775 mm(1)
    • 5.0 mm(9)
    • 6.0 mm(23)
    • 6.351 mm(1)
    • 7.5 mm(5)
    • 7.95 mm(1)
    • 8.0 mm(11)
    • 9.0 mm(13)
    • 9.525 mm(3)
    • 10.0 mm(12)
    • 12.0 mm(19)
    • 12.701 mm(1)
    • 13.0 mm(1)
    • 14.3 mm(1)
    • 15.0 mm(13)
    • 15.875 mm(1)
    • 16.0 mm(7)
    • 18.0 mm(12)
    • 19.05 mm(2)
    • 20.0 mm(9)
    • 21.0 mm(1)
    • 23.826 mm(1)
    • 24.0 mm(8)
    • 25.0 mm(3)
    • 28.0 mm(1)
    • 28.576 mm(1)
    • 30.0 mm(10)
    • 31.75 mm(1)
    • 33.35 mm(1)
    • 35.0 mm(1)
    • 36.0 mm(4)
    • 39.7 mm(1)
    • 40.0 mm(2)
    • 42.0 mm(1)
    • 44.45 mm(1)
    • 45.0 mm(1)
    • 48.0 mm(3)
    • 49.526 mm(1)
    • 50.0 mm(1)
    • 55.575 mm(1)
    • 56.0 mm(1)
    • 57.151 mm(1)
    • 60.0 mm(2)
    • 63.0 mm(1)
    • 66.675 mm(1)
    • 70.0 mm(1)
    • 88.0 mm(1)
    • 88.9 mm(1)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (238)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Number of Flutes
    Number of Flutes
    • 2 (108)
    • 4 (108)
    • 5 (4)
    • 6 (22)
    Over All Length [L]
    Over All Length [L]
    • 1.496 in(8)
    • 1.969 in(78)
    • 2.244 in(8)
    • 2.362 in(5)
    • 2.48 in(24)
    • 2.953 in(10)
    • 2.992 in(31)
    • 3.0 in(4)
    • 3.15 in(3)
    • 3.504 in(2)
    • 3.938 in(26)
    • 4.0 in(8)
    • 4.094 in(1)
    • 4.331 in(1)
    • 4.724 in(1)
    • 4.921 in(15)
    • 5.0 in(8)
    • 5.906 in(6)
    • 6.0 in(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 38.0 mm(8)
    • 50.0 mm(78)
    • 57.0 mm(8)
    • 60.0 mm(5)
    • 63.0 mm(24)
    • 75.0 mm(10)
    • 76.0 mm(31)
    • 76.2 mm(4)
    • 80.0 mm(3)
    • 89.0 mm(2)
    • 100.0 mm(26)
    • 101.601 mm(8)
    • 104.0 mm(1)
    • 110.0 mm(1)
    • 120.0 mm(1)
    • 125.0 mm(15)
    • 127.0 mm(8)
    • 150.0 mm(6)
    • 152.4 mm(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • BALL NOSE (65)
    • RADIUS (55)
    • SQUARE END (122)
    Corner Radius
    Corner Radius
    • 0.0 in(122)
    • 0.006 in(1)
    • 0.008 in(1)
    • 0.01 in(11)
    • 0.012 in(3)
    • 0.016 in(2)
    • 0.02 in(24)
    • 0.024 in(1)
    • 0.03 in(6)
    • 0.039 in(18)
    • 0.04 in(1)
    • 0.049 in(1)
    • 0.05 in(1)
    • 0.06 in(9)
    • 0.063 in(1)
    • 0.079 in(13)
    • 0.094 in(1)
    • 0.098 in(4)
    • 0.119 in(7)
    • 0.125 in(1)
    • 0.156 in(1)
    • 0.157 in(5)
    • 0.187 in(1)
    • 0.197 in(4)
    • 0.237 in(2)
    • 0.315 in(1)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(122)
    • 0.151 mm(1)
    • 0.2 mm(1)
    • 0.25 mm(11)
    • 0.301 mm(3)
    • 0.4 mm(2)
    • 0.5 mm(24)
    • 0.601 mm(1)
    • 0.75 mm(6)
    • 1.0 mm(18)
    • 1.026 mm(1)
    • 1.25 mm(1)
    • 1.276 mm(1)
    • 1.5 mm(9)
    • 1.6 mm(1)
    • 2.0 mm(13)
    • 2.375 mm(1)
    • 2.5 mm(4)
    • 3.0 mm(7)
    • 3.176 mm(1)
    • 3.975 mm(1)
    • 4.0 mm(5)
    • 4.75 mm(1)
    • 5.0 mm(4)
    • 6.0 mm(2)
    • 8.0 mm(1)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(241)
    • 0.351 mm(1)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(241)
    • 0.014 in(1)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • ALTIN-MT (3)
    • ALTIN-MT1 (20)
    • TIALN-LT (1)
    • TIALN-LT1 (84)
    • WU10PE (134)
    Rough Finish
    Rough Finish
    • F (139)
    • FR (99)
    • R (4)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 5.0 (15)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.01 in(1)
    • 0.014 in(2)
    • 0.019 in(6)
    • 0.022 in(2)
    • 0.027 in(1)
    • 0.03 in(6)
    • 0.031 in(1)
    • 0.037 in(8)
    • 0.045 in(6)
    • 0.052 in(1)
    • 0.053 in(4)
    • 0.057 in(10)
    • 0.065 in(2)
    • 0.069 in(5)
    • 0.072 in(1)
    • 0.073 in(1)
    • 0.077 in(9)
    • 0.095 in(3)
    • 0.096 in(4)
    • 0.106 in(2)
    • 0.11 in(2)
    • 0.112 in(1)
    • 0.114 in(1)
    • 0.116 in(5)
    • 0.119 in(1)
    • 0.146 in(4)
    • 0.152 in(1)
    • 0.181 in(3)
    • 0.213 in(4)
    • 0.217 in(1)
    • 0.23 in(1)
    • 0.291 in(4)
    • 0.295 in(1)
    • 0.362 in(3)
    • 0.37 in(1)
    • 0.374 in(1)
    • 0.433 in(3)
    • 0.449 in(1)
    • 0.472 in(1)
    • 0.591 in(2)
    • 0.606 in(1)
    • 0.713 in(1)
    • 0.748 in(1)
    • 0.764 in(1)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 0.25 mm(1)
    • 0.351 mm(2)
    • 0.45 mm(6)
    • 0.55 mm(2)
    • 0.65 mm(1)
    • 0.75 mm(6)
    • 0.8 mm(1)
    • 0.951 mm(8)
    • 1.151 mm(6)
    • 1.3 mm(1)
    • 1.35 mm(4)
    • 1.451 mm(10)
    • 1.651 mm(2)
    • 1.75 mm(5)
    • 1.8 mm(1)
    • 1.85 mm(1)
    • 1.951 mm(9)
    • 2.401 mm(3)
    • 2.45 mm(4)
    • 2.7 mm(2)
    • 2.801 mm(2)
    • 2.85 mm(1)
    • 2.901 mm(1)
    • 2.95 mm(5)
    • 3.0 mm(1)
    • 3.7 mm(4)
    • 3.85 mm(1)
    • 4.601 mm(3)
    • 5.4 mm(4)
    • 5.5 mm(1)
    • 5.851 mm(1)
    • 7.4 mm(4)
    • 7.5 mm(1)
    • 9.201 mm(3)
    • 9.4 mm(1)
    • 9.5 mm(1)
    • 11.0 mm(3)
    • 11.4 mm(1)
    • 11.951 mm(1)
    • 15.0 mm(2)
    • 15.4 mm(1)
    • 18.1 mm(1)
    • 19.0 mm(1)
    • 19.401 mm(1)
    Neck Diameter MinkomuNeck Diameter Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 3.0 mm(8)
    • 4.0 mm(51)
    • 5.0 mm(2)
    • 6.0 mm(85)
    • 6.351 mm(4)
    • 7.95 mm(3)
    • 8.0 mm(17)
    • 9.525 mm(5)
    • 10.0 mm(23)
    • 12.0 mm(16)
    • 12.701 mm(5)
    • 15.875 mm(3)
    • 16.0 mm(9)
    • 19.05 mm(2)
    • 20.0 mm(6)
    • 25.0 mm(2)
    • 25.401 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.119 in(8)
    • 0.157 in(51)
    • 0.197 in(2)
    • 0.237 in(85)
    • 0.25 in(4)
    • 0.313 in(3)
    • 0.315 in(17)
    • 0.375 in(5)
    • 0.394 in(23)
    • 0.473 in(16)
    • 0.5 in(5)
    • 0.625 in(3)
    • 0.63 in(9)
    • 0.75 in(2)
    • 0.787 in(6)
    • 0.984 in(2)
    • 1.0 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Vision Plus™ • Řada D618 • Ostrá hrana • Válcová stopka • Metrické
    (9)

    Vision Plus™ • Řada D618 • Ostrá hrana • Válcová stopka • Metrické

    Řada 75N5 • Vision Plus™
    (25)

    Řada 75N5 • Vision Plus™

    Vision Plus™ • Series 7S05 • Sharp Edge • Cylindrical Shank • Inch
    (15)

    Vision Plus™ • Series 7S05 • Sharp Edge • Cylindrical Shank • Inch

    Vision Plus™ • Series 7S5F • Ball Nose • Cylindrical Shank • Inch
    (5)

    Vision Plus™ • Series 7S5F • Ball Nose • Cylindrical Shank • Inch

    Řady 7585 7595 • Vision Plus™
    (30)

    Řady 7585 7595 • Vision Plus™

    Vision Plus™ • Řada 7150 • Kulové • Válcová stopka • Metrické
    (7)

    Vision Plus™ • Řada 7150 • Kulové • Válcová stopka • Metrické

    Vision Plus™ • Řada 7151 • Kulové • Válcová stopka • Metrické
    (9)

    Vision Plus™ • Řada 7151 • Kulové • Válcová stopka • Metrické

    Vision Plus™ • Řada 7505 7515 7525 7545 • Ostrá hrana • Válcová stopka • Metrické
    (29)

    Vision Plus™ • Řada 7505 7515 7525 7545 • Ostrá hrana • Válcová stopka • Metrické

    Vision Plus™ Micro • Řada 7N21 • Kulové • Válcová stopka • Metrické
    (6)

    Vision Plus™ Micro • Řada 7N21 • Kulové • Válcová stopka • Metrické

    Vision Plus™ Micro • Řada 7N02 7N12 7N22 • Ostrá hrana • Válcová stopka • Metrické
    (63)

    Vision Plus™ Micro • Řada 7N02 7N12 7N22 • Ostrá hrana • Válcová stopka • Metrické

    Vision Plus™ • Řada 7061 • Kulové • Válcová stopka • Metrické
    (6)

    Vision Plus™ • Řada 7061 • Kulové • Válcová stopka • Metrické

    Vision Plus™ • Řada 75N2 • S rádiusem • Válcová stopka • Metrické
    (2)

    Vision Plus™ • Řada 75N2 • S rádiusem • Válcová stopka • Metrické

    Vision Plus™ • Řada 70N1 • Kulové • S odsazením • Válcová stopka • Metrické
    (9)

    Vision Plus™ • Řada 70N1 • Kulové • S odsazením • Válcová stopka • Metrické

    Vision Plus™ • Řada 7050 7060 • Kulové • Válcová stopka • Metrické
    (10)

    Vision Plus™ • Řada 7050 7060 • Kulové • Válcová stopka • Metrické

    Vision Plus™ Micro • Řada 7N01 • Kulové • Válcová stopka • Metrické
    (13)

    Vision Plus™ Micro • Řada 7N01 • Kulové • Válcová stopka • Metrické

    Vision Plus™ • Series 7S7R • Radius • Cylindrical Shank • Inch
    (3)

    Vision Plus™ • Series 7S7R • Radius • Cylindrical Shank • Inch

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

     

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again