Oznámení

Označit vše jako přečtené
Mobile Menu

GT Series

Vybrat filtry
Filters
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (231)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (163)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (178)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (178)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (92)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (53)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (92)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (53)
  • M Stainless Steel (214)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (178)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (107)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (143)
  • K Cast Iron (54)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (54)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (54)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (19)
  • N Non-Ferrous Materials (174)
    • N1
      Wrought Aluminum
      (120)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (174)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (43)
  • S High-Temp Alloys (310)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (92)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (135)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (135)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (83)
  • H Hardened Materials (10)
    • H1
      Hardened Materials 44-48 HRC
      (10)
    • H2
      Hardened Materials 48-55 HRC
      (10)
Select All Star
  • US (129)
Applications
Applications
  • Tapping Blind Hole Tapping Blind Hole (380)
  • Tapping Through Hole Tapping Through Hole (334)
  • Threading Threading (740)
Cutting Length
Cutting Length
  • 6.0 mm (4)
  • 7.0 mm (4)
  • 7.9 mm (18)
  • 8.0 mm (20)
  • 8.1 mm (8)
  • 9.0 mm (6)
  • 9.1 mm (17)
  • 10.0 mm (66)
  • 10.5 mm (1)
  • 10.9 mm (2)
  • 11.0 mm (10)
  • 11.101 mm (29)
  • 11.201 mm (8)
  • 11.601 mm (10)
  • 11.8 mm (8)
  • 11.9 mm (4)
  • 12.0 mm (40)
  • 12.101 mm (11)
  • 12.201 mm (3)
  • 12.4 mm (28)
  • 12.701 mm (4)
  • 13.0 mm (28)
  • 13.101 mm (4)
  • 13.4 mm (9)
  • 14.0 mm (17)
  • 14.201 mm (14)
  • 14.9 mm (1)
  • 15.0 mm (69)
  • 15.101 mm (25)
  • 15.201 mm (10)
  • 16.0 mm (33)
  • 17.0 mm (7)
  • 18.0 mm (49)
  • 19.0 mm (5)
  • 19.6 mm (31)
  • 20.0 mm (33)
  • 21.0 mm (7)
  • 21.1 mm (3)
  • 22.0 mm (19)
  • 23.0 mm (6)
  • 23.1 mm (15)
  • 24.0 mm (5)
  • 25.0 mm (9)
  • 25.401 mm (14)
  • 26.0 mm (3)
  • 27.0 mm (5)
  • 30.0 mm (6)
  • 31.8 mm (4)
  • 32.0 mm (3)
  • 33.301 mm (1)
  • 35.0 mm (2)
  • 40.0 mm (1)
  • 40.401 mm (1)
Cutting Length Min komu Cutting Length Max
Cutting Length
Cutting Length
  • 0.237 in (4)
  • 0.276 in (4)
  • 0.311 in (18)
  • 0.315 in (20)
  • 0.319 in (8)
  • 0.354 in (6)
  • 0.358 in (17)
  • 0.394 in (66)
  • 0.414 in (1)
  • 0.429 in (2)
  • 0.433 in (10)
  • 0.437 in (29)
  • 0.441 in (8)
  • 0.457 in (10)
  • 0.465 in (8)
  • 0.47 in (4)
  • 0.473 in (40)
  • 0.477 in (11)
  • 0.48 in (3)
  • 0.488 in (28)
  • 0.5 in (4)
  • 0.512 in (28)
  • 0.516 in (4)
  • 0.528 in (9)
  • 0.551 in (17)
  • 0.559 in (14)
  • 0.587 in (1)
  • 0.591 in (69)
  • 0.595 in (25)
  • 0.598 in (10)
  • 0.63 in (33)
  • 0.669 in (7)
  • 0.709 in (49)
  • 0.748 in (5)
  • 0.772 in (31)
  • 0.787 in (33)
  • 0.828 in (7)
  • 0.832 in (3)
  • 0.866 in (19)
  • 0.906 in (6)
  • 0.909 in (15)
  • 0.946 in (5)
  • 0.984 in (9)
  • 1.0 in (14)
  • 1.024 in (3)
  • 1.063 in (5)
  • 1.181 in (6)
  • 1.252 in (4)
  • 1.26 in (3)
  • 1.311 in (1)
  • 1.379 in (2)
  • 1.575 in (1)
  • 1.591 in (1)
Cutting Length Min komu Cutting Length Max
Thread Size
Thread Size
  • 1 - 8 (4)
  • 1/2 - 13 (21)
  • 1/2 - 20 (15)
  • 1/4 - 20 (28)
  • 1/4 - 28 (19)
  • 10 - 24 (19)
  • 10 - 32 (26)
  • 2 - 56 (11)
  • 3/4 - 10 (10)
  • 3/4 - 16 (6)
  • 3/8 - 16 (29)
  • 3/8 - 24 (14)
  • 4 - 40 (17)
  • 4 - 48 (2)
  • 5 - 40 (7)
  • 5/16 - 18 (23)
  • 5/16 - 24 (16)
  • 5/16- 24 (1)
  • 5/8 - 11 (11)
  • 5/8 - 18 (6)
  • 6 - 32 (19)
  • 6 - 40 (4)
  • 7/16 - 14 (10)
  • 7/16 - 20 (12)
  • 8 - 32 (19)
  • 8 - 36 (4)
  • 9/16 - 18 (2)
  • M10 X 1 (10)
  • M10 X 1,25 (12)
  • M10 X 1,5 (35)
  • M12 X 1,25 (9)
  • M12 X 1,5 (15)
  • M12 X 1,75 (32)
  • M14 X 1,5 (14)
  • M14 X 2 (15)
  • M16 X 1,5 (14)
  • M16 X 2 (20)
  • M18 X 1,5 (3)
  • M18 X 2 (2)
  • M18 X 2,5 (1)
  • M2,5 X 0,45 (5)
  • M20 X 2,5 (10)
  • M24 X 3 (4)
  • M3 X 0,5 (24)
  • M3,5 X 0,6 (3)
  • M30 X 3,5 (2)
  • M36 X 4 (1)
  • M4 X 0,7 (26)
  • M5 X 0,8 (32)
  • M6 X 1 (40)
  • M7 X 1 (5)
  • M8 X 1 (12)
  • M8 X 1,25 (39)
Thread Tolerance Class ANSI
Thread Tolerance Class ANSI
  • 2BX (33)
  • 3BX (72)
Thread Tolerance Class ISO
Thread Tolerance Class ISO
  • 6H-I (50)
  • 6HX-I (231)
Tap PD Class
Tap PD Class
  • D10 (3)
  • D11 (3)
  • D12 (1)
  • D3 (13)
  • D4 (19)
  • D5 (34)
  • D6 (18)
  • D7 (2)
  • D8 (3)
  • D9 (8)
  • H2 (31)
  • H3 (147)
  • H4 (15)
  • H5 (41)
  • H6 (10)
  • H7 (6)
Connection Style
Connection Style
  • Cylindrical with Drive Square (732)
Number of Flutes
Number of Flutes
  • 0 (3)
  • 2 (97)
  • 3 (390)
  • 4 (156)
  • 5 (39)
  • 6 (55)
Internal Coolant Capability
Internal Coolant Capability
application
Coating
Coating
  • CrC/C (107)
  • TiCN (90)
  • Uncoated (1)
Grade Of Cutting Tool
Grade Of Cutting Tool
  • WH36MG (17)
  • WN35MG (8)
  • WN38MG (26)
  • WN44EG (79)
  • WN48EG (15)
  • WP31MG (51)
  • WS30MG (10)
  • WS32MG (16)
  • WS34MG (172)
  • WS39MG (100)
  • WU32MG (246)
Tap Standard
Tap Standard
  • ANSI (318)
  • DIN 2174 (41)
  • DIN 371 (93)
  • DIN 374 (54)
  • DIN 376 (68)
  • DIN-ANSI (150)
Tap Type
Tap Type
  • 11 (33)
  • 13 (64)
  • 3 (112)
  • 8 (531)
frontEnd
Thread TPI
Thread TPI
  • 8.0 mm (4)
  • 10.0 mm (10)
  • 11.0 mm (11)
  • 13.0 mm (21)
  • 14.0 mm (10)
  • 16.0 mm (35)
  • 18.0 mm (31)
  • 20.0 mm (55)
  • 24.0 mm (50)
  • 28.0 mm (19)
  • 32.0 mm (64)
  • 36.0 mm (4)
  • 40.0 mm (28)
  • 48.0 mm (2)
  • 56.0 mm (11)
Thread TPI Min komu Thread TPI Max
Thread TPI
Thread TPI
  • 0.315 in (4)
  • 0.394 in (10)
  • 0.433 in (11)
  • 0.512 in (21)
  • 0.551 in (10)
  • 0.63 in (35)
  • 0.709 in (31)
  • 0.787 in (55)
  • 0.946 in (50)
  • 1.102 in (19)
  • 1.26 in (64)
  • 1.417 in (4)
  • 1.575 in (28)
  • 1.891 in (2)
  • 2.205 in (11)
Thread TPI Min komu Thread TPI Max
Thread Pitch
Thread Pitch
  • 0.45 mm (5)
  • 0.5 mm (24)
  • 0.601 mm (3)
  • 0.701 mm (26)
  • 0.8 mm (32)
  • 1.0 mm (68)
  • 1.25 mm (59)
  • 1.5 mm (81)
  • 1.75 mm (32)
  • 2.0 mm (37)
  • 2.5 mm (11)
  • 3.0 mm (4)
  • 3.5 mm (2)
  • 4.0 mm (1)
Thread Pitch Min komu Thread Pitch Max
Thread Pitch
Thread Pitch
  • 0.019 in (5)
  • 0.02 in (24)
  • 0.024 in (3)
  • 0.028 in (26)
  • 0.031 in (32)
  • 0.039 in (68)
  • 0.049 in (59)
  • 0.06 in (81)
  • 0.069 in (32)
  • 0.079 in (37)
  • 0.098 in (11)
  • 0.119 in (4)
  • 0.138 in (2)
  • 0.157 in (1)
Thread Pitch Min komu Thread Pitch Max
Chamfer Form
Chamfer Form
  • FB (87)
  • PC (308)
  • SB (345)
backEnd
Back-End Diameter
Back-End Diameter
  • 3.5 mm (11)
  • 3.575 mm (81)
  • 4.275 mm (36)
  • 4.5 mm (13)
  • 4.926 mm (58)
  • 6.0 mm (48)
  • 6.075 mm (1)
  • 6.476 mm (63)
  • 7.0 mm (11)
  • 8.0 mm (25)
  • 8.076 mm (65)
  • 8.201 mm (22)
  • 9.0 mm (37)
  • 9.326 mm (54)
  • 9.675 mm (61)
  • 10.0 mm (28)
  • 10.9 mm (3)
  • 11.0 mm (28)
  • 12.0 mm (32)
  • 12.201 mm (20)
  • 14.0 mm (6)
  • 14.976 mm (16)
  • 16.0 mm (10)
  • 18.0 mm (4)
  • 20.326 mm (4)
  • 22.0 mm (2)
  • 28.0 mm (1)
Back-End Diameter Min komu Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.138 in (11)
  • 0.142 in (81)
  • 0.168 in (36)
  • 0.177 in (13)
  • 0.194 in (58)
  • 0.237 in (48)
  • 0.24 in (1)
  • 0.255 in (63)
  • 0.276 in (11)
  • 0.315 in (25)
  • 0.318 in (65)
  • 0.323 in (22)
  • 0.354 in (37)
  • 0.367 in (54)
  • 0.381 in (61)
  • 0.394 in (28)
  • 0.429 in (3)
  • 0.433 in (28)
  • 0.473 in (32)
  • 0.48 in (20)
  • 0.551 in (6)
  • 0.59 in (16)
  • 0.63 in (10)
  • 0.709 in (4)
  • 0.8 in (4)
  • 0.866 in (2)
  • 1.102 in (1)
Back-End Diameter Min komu Back-End Diameter Max
No filters matching ""
Informace o produktech
Metrické
Palcové

PŮVODNÍ PRODUKT

Vysoce výkonné závitníky

Závitníky Victory™ s břity do šroubovice HSS-E-PM • Závitování v blízkosti dna slepých otvorů
(3 Products)
  • Threading: Blind HoleThreading: Blind Hole
  • HSS-E-PMHSS-E-PM
  • Chamfer Form E (1.5–2)Chamfer Form E (1.5–2)
  • Tapping Helix Angle: 45°Tapping Helix Angle: 45°
  • DIN number 371DIN number 371
  • DIN number 374DIN number 374
  • DIN number 376DIN number 376
  • Through Coolant: Axial: TappingThrough Coolant: Axial: Tapping
  • Class of Fit: 6HXClass of Fit: 6HX
  • Manufacturer’s Specs: MManufacturer’s Specs: M
  • Manufacturer’s Specs: MFManufacturer’s Specs: MF
Informace o produktech
SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
4153955 GT335001 GT335001 WU32MG   M5 X 0,8 70.0000 2.760 10.0000 .3900 25.0000 .9800 6.0 .2362 3 DIN 371 6HX-I
    Ceníková cena:
    $57,47 /každý.
    Vaše cena::
    Počet
    4153956 GT335002 GT335002 WU32MG   M6 X 1 80.0000 3.150 10.0000 .3900 30.0000 1.180 6.0 .2362 3 DIN 371 6HX-I
      Ceníková cena:
      $58,35 /každý.
      Vaše cena::
      Počet
      4153957 GT335003 GT335003 WU32MG   M8 X 1,25 90.0000 3.540 13.0000 .5100 35.0000 1.380 8.0 .315 3 DIN 371 6HX-I
        Ceníková cena:
        $66,73 /každý.
        Vaše cena::
        Počet
        Ceníková cena:
        Sleva: %
        Vaše cena::
        Výměna Tato položka není k dispozici
        Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
        Počet

        Prodáváno v baleních z

        PŮVODNÍ PRODUKT

        Vysoce výkonné závitníky

        Závitníky Victory™ s břity do šroubovice HSS-E-PM • Slepé otvory
        (10 Products)
        • Tapping: Blind HoleTapping: Blind Hole
        • HSS-E-PMHSS-E-PM
        • Chamfer Form C (2–3)Chamfer Form C (2–3)
        • Tapping Helix Angle: 45°Tapping Helix Angle: 45°
        • DIN number 371DIN number 371
        • DIN number 376DIN number 376
        • Through Coolant: Axial: TappingThrough Coolant: Axial: Tapping
        • Class of Fit: 6HXClass of Fit: 6HX
        • Manufacturer’s Specs: MManufacturer’s Specs: M
        Informace o produktech
        SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter [Z] Number of Flutes Dimension Standard Thread Tolerance Class ISO
        3955344 GT315002 GT315002 WS34MG   M6 X 1 80.0000 3.150 10.0000 .3900 30.0000 1.180 6.0 .2362 3 DIN 371 6HX-I
          Ceníková cena:
          $52,51 /každý.
          Vaše cena::
          Počet
          3955346 GT315004 GT315004 WS34MG   M10 X 1,5 100.0000 3.940 15.0000 .5900 39.0000 1.540 10.0 .3937 3 DIN 371 6HX-I
            Ceníková cena:
            $68,82 /každý.
            Vaše cena::
            Počet
            3955350 GT315008 GT315008 WU32MG   M6 X 1 80.0000 3.150 10.0000 .3900 30.0000 1.180 6.0 .2362 3 DIN 371 6HX-I
              Ceníková cena:
              $52,51 /každý.
              Vaše cena::
              Počet
              3955351 GT315009 GT315009 WU32MG   M8 X 1,25 90.0000 3.540 13.0000 .5100 35.0000 1.380 8.0 .315 3 DIN 371 6HX-I
                Ceníková cena:
                $59,97 /každý.
                Vaše cena::
                Počet
                4033744 GT315025 GT315025 WU32MG   M24 X 3 160.0000 6.300 30.0000 1.180 77.0000 3.030 18.0 .7087 5 DIN 376 6HX-I
                  Ceníková cena:
                  $247,27 /každý.
                  Vaše cena::
                  Počet
                  5143532 GT315035 GT315035 WU32MG   M20 X 2,5 140.0000 5.510 25.0000 .9800 64.0000 2.520 16.0 .6299 4 DIN 376 6HX-I
                    Ceníková cena:
                    $231,16 /každý.
                    Vaše cena::
                    Počet
                    Ceníková cena:
                    Sleva: %
                    Vaše cena::
                    Výměna Tato položka není k dispozici
                    Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                    Počet

                    Prodáváno v baleních z

                    PŮVODNÍ PRODUKT

                    High-Performance Taps • VICTORY™ • GT Series  • HSS-E PM

                    Victory™ • GT24 • Form C Semi-Bottoming Entry Taper • DIN Length ANSI Shank
                    (14 Products)
                    • Tapping: Through HoleTapping: Through Hole
                    • Tapping: Blind HoleTapping: Blind Hole
                    • HSS-E-PMHSS-E-PM
                    • 3850938509
                    • DIN Number ANSIDIN Number ANSI
                    • Flood Coolant: TappingFlood Coolant: Tapping
                    • Manufacturer’s Specs: UNCManufacturer’s Specs: UNC
                    • Manufacturer’s Specs: UNFManufacturer’s Specs: UNF
                    Informace o produktech
                    SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Number of Lube Grooves Tap Pitch Diameter Limit
                    5944973 GT245008 GT245008 WU32MG   10 - 32 70.3000 2.770 10.0000 .3900 25.3000 1.000 4.928 .194 4 H6
                      Ceníková cena:
                      $55,39 /každý.
                      Vaše cena::
                      Počet
                      5944974 GT245009 GT245009 WU32MG   1/4 - 20 80.9000 3.180 13.0000 .5100 30.9000 1.220 6.477 .255 4 H4
                        Ceníková cena:
                        $46,72 /každý.
                        Vaše cena::
                        Počet
                        5944976 GT245011 GT245011 WU32MG   1/4 - 28 80.4000 3.160 13.0000 .5100 30.4000 1.200 6.477 .255 4 H4
                          Ceníková cena:
                          $49,08 /každý.
                          Vaše cena::
                          Počet
                          5944978 GT245013 GT245013 WU32MG   5/16 - 18 91.0000 3.580 14.0000 .5500 36.0000 1.420 8.077 .318 4 H5
                            Ceníková cena:
                            $61,84 /každý.
                            Vaše cena::
                            Počet
                            5944982 GT245017 GT245017 WU32MG   3/8 - 16 101.1000 3.980 16.0000 .6300 39.0000 1.540 9.677 .381 6 H5
                              Ceníková cena:
                              $75,40 /každý.
                              Vaše cena::
                              Počet
                              5944990 GT245025 GT245025 WU32MG   1/2 - 13 110.0000 4.330 20.0000 .7900 47.0000 1.850 9.322 .367 6 H5
                                Ceníková cena:
                                $103,74 /každý.
                                Vaše cena::
                                Počet
                                Ceníková cena:
                                Sleva: %
                                Vaše cena::
                                Výměna Tato položka není k dispozici
                                Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                                Počet

                                Prodáváno v baleních z

                                PŮVODNÍ PRODUKT

                                • Tapping: Through HoleTapping: Through Hole
                                • Tapping: Blind HoleTapping: Blind Hole
                                • HSS-E-PMHSS-E-PM
                                • 3850938509
                                • DIN Number ANSIDIN Number ANSI
                                • Flood Coolant: TappingFlood Coolant: Tapping
                                • Manufacturer’s Specs: MManufacturer’s Specs: M
                                • Manufacturer’s Specs: MFManufacturer’s Specs: MF
                                Informace o produktech
                                SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Number of Lube Grooves Tap Pitch Diameter Limit
                                5945012 GT245037 GT245037 WU32MG   M3 X 0,5 56.0000 2.200 10.0000 .3900 20.0000 .7900 3.581 .141 2 D5
                                  Ceníková cena:
                                  $38,76 /každý.
                                  Vaše cena::
                                  Počet
                                  5945014 GT245039 GT245039 WU32MG   M4 X 0,7 63.0000 2.480 10.0000 .3900 21.0000 .8300 4.267 .168 4 D6
                                    Ceníková cena:
                                    $39,38 /každý.
                                    Vaše cena::
                                    Počet
                                    5945016 GT245041 GT245041 WU32MG   M6 X 1 80.0000 3.150 13.0000 .5100 30.0000 1.180 6.477 .255 4 D8
                                      Ceníková cena:
                                      $42,48 /každý.
                                      Vaše cena::
                                      Počet
                                      5945019 GT245044 GT245044 WU32MG   M8 X 1,25 90.0000 3.540 14.0000 .5500 35.0000 1.380 8.077 .318 6 D9
                                        Ceníková cena:
                                        $56,25 /každý.
                                        Vaše cena::
                                        Počet
                                        5945020 GT245045 GT245045 WU32MG   M10 X 1,25 100.0000 3.940 16.0000 .6300 39.0000 1.530 9.677 .381 6 D9
                                          Ceníková cena:
                                          $68,58 /každý.
                                          Vaše cena::
                                          Počet
                                          5945023 GT245048 GT245048 WU32MG   M12 X 1,5 110.0000 4.330 18.0000 .7100 44.0000 1.730 9.322 .367 6 D9
                                            Ceníková cena:
                                            $89,82 /každý.
                                            Vaše cena::
                                            Počet
                                            Ceníková cena:
                                            Sleva: %
                                            Vaše cena::
                                            Výměna Tato položka není k dispozici
                                            Náhradní produkt Tato položka může být k dispozici prostřednictvím distributora
                                            Počet

                                            Prodáváno v baleních z

                                            PŮVODNÍ PRODUKT

                                            • Tapping: Blind HoleTapping: Blind Hole
                                            • HSS-E-PMHSS-E-PM
                                            • 3851138511
                                            • DIN Number ANSIDIN Number ANSI
                                            • Flood Coolant: TappingFlood Coolant: Tapping
                                            • Manufacturer’s Specs: UNCManufacturer’s Specs: UNC
                                            • Manufacturer’s Specs: UNFManufacturer’s Specs: UNF
                                            Informace o produktech
                                            SAP Material Number ISO Catalog Number ANSI Catalog Number Grade First Choice [D1-TDZ] Thread Diameter Size [L] Overall Length [L] Overall Length [L3] Thread Length [L3] Thread Length [L2] Useable Length [L2] Useable Length [D] Adapter / Shank / Bore Diameter [D] Adapter / Shank / Bore Diameter Number of Lube Grooves Tap Pitch Diameter Limit
                                            5945091 GT265002 GT265002 WU32MG   2 - 56 44.5000 1.750 11.2000 .4400 12.7000 .5000 3.581 .141 0 H3
                                              Ceníková cena:
                                              $46,36 /každý.
                                              Vaše cena::
                                              Počet
                                              5945094 GT265005 GT265005 WU32MG   4 - 40 56.0000 2.200 10.0000 .3900 18.0000 .7100 3.581 .141 0 H3
                                                Ceníková cena:
                                                $42,61 /každý.
                                                Vaše cena::
                                                Počet
                                                5945101 GT265012 GT265012 WU32MG   8 - 32 63.0000 2.480 10.0000 .3900 21.0000 .8300 4.267 .168 4 H3
                                                  Ceníková cena:
                                                  $43,31 /každý.
                                                  Vaše cena::
                                                  Počet
                                                  5945107 GT265018 GT265018 WU32MG   1/4 - 20 80.0000 3.150 13.0000 .5100 30.0000 1.180 6.477 .255 4 H4
                                                    Ceníková cena:
                                                    $46,72 /každý.
                                                    Vaše cena::
                                                    Počet
                                                    5945108 GT265019 GT265019 WU32MG   1/4 - 20 80.0000 3.150 13.0000 .5100 30.0000 1.180 6.477 .255 4 H6
                                                      Ceníková cena:
                                                      $46,72 /každý.
                                                      Vaše cena::
                                                      Počet
                                                      5945115 GT265026 GT265026 WU32MG   3/8 - 16 100.0000 3.940 16.0000 .6300 39.0000 1.540 9.677 .381 6 H5
                                                        Ceníková cena:
                                                        $75,40 /každý.
                                                        Vaše cena::
                                                        Počet
                                                        Ceníková cena: