successfully added to cart
View Cart

Notifications

Mark all as read

TopThread™ and TopGroove™

Select Filters
Filters
Filters
View filters in
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (1)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS
      (1)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS
      (1)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS
      (1)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS
      (1)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS
      (1)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS
      (1)
  • M Stainless Steel (1)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS
      (1)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS
      (1)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS
      (1)
  • K Cast Iron (1)
    • K1
      Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS
      (1)
    • K2
      Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS
      (1)
    • K3
      High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS
      (1)
  • N Non-Ferrous Materials (1)
    • N1
      Wrought Aluminum
      (1)
    • N2
      Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%
      (1)
    • N3
      High-Silicon Aluminum Alloys Si >12.2%
      (1)
    • N4
      Copper, Brass, Zinc-based on machinability index range of 70-100
      (1)
    • N5
      Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass
      (1)
    • N6
      Carbon, Graphite Composites, CFRP
      (1)
    • N7
      MMC's
      (1)
  • S High-Temp Alloys (1)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS
      (1)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS
      (1)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS
      (1)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS
      (1)
  • H Hardened Materials (1)
    • H1
      Hardened Materials 44-48 HRC
      (1)
    • H2
      Hardened Materials 48-55 HRC
      (1)
Applications
Applications
  • Grooving Grooving (1)
  • ID Grooving ID Grooving (1)
  • ID Thread Turning ID Thread Turning (1)
  • Threading Threading (1)
Type of Thread
Type of Thread
  • 60 (1)
  • BUTTRESS (1)
  • UN (1)
Cutting Condition
Cutting Condition
  • Heavily Interrupted Cut (1)
  • Lightly Interrupted Cut (1)
  • Smooth Cut (1)
  • Varying Depth of Cut (1)
Cutting Edges Per Insert
Cutting Edges Per Insert
  • 1.0 (1)
  • 2.0 (1)
Cutting Edges Per Insert Min to Cutting Edges Per Insert Max
cornerConfiguration
Corner Radius
Corner Radius
  • 0.003 in (1)
  • 0.004 in (1)
  • 0.008 in (1)
  • 0.02 in (1)
  • 0.03 in (1)
  • 0.031 in (1)
  • 0.039 in (1)
  • 0.047 in (1)
  • 0.049 in (1)
  • 0.06 in (1)
  • 0.063 in (1)
  • 0.069 in (1)
Corner Radius Min to Corner Radius Max
Corner Radius
Corner Radius
  • 0.076 mm (1)
  • 0.1 mm (1)
  • 0.2 mm (1)
  • 0.5 mm (1)
  • 0.75 mm (1)
  • 0.775 mm (1)
  • 1.0 mm (1)
  • 1.201 mm (1)
  • 1.25 mm (1)
  • 1.5 mm (1)
  • 1.6 mm (1)
  • 1.75 mm (1)
Corner Radius Min to Corner Radius Max
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
  • K2885 (1)
  • K313 (1)
  • K420 (1)
  • K4H (1)
  • K68 (1)
  • KC250 (1)
  • KC5010 (1)
  • KC5025 (1)
  • KC5410 (1)
  • KC710 (1)
  • KC720 (1)
  • KC722 (1)
  • KC730 (1)
  • KC810 (1)
  • KC850 (1)
  • KC910 (1)
  • KC9110 (1)
  • KC9320 (1)
  • KC935 (1)
  • KC950 (1)
  • KCK20 (1)
  • KCK20B (1)
  • KCP10B (1)
  • KCP25B (1)
  • KCU10 (1)
  • KCU25 (1)
  • KT175 (1)
  • KT315 (1)
  • KU10T (1)
  • KU25T (1)
  • KU30T (1)
  • THM (1)
  • TN10P (1)
  • TN6010 (1)
  • TN6025 (1)
  • TN7110 (1)
  • WU10PT (1)
frontEnd
Cutting Width
Cutting Width
  • 0.02 in (1)
  • 0.031 in (1)
  • 0.035 in (1)
  • 0.039 in (1)
  • 0.041 in (1)
  • 0.047 in (1)
  • 0.055 in (1)
  • 0.058 in (1)
  • 0.06 in (1)
  • 0.062 in (1)
  • 0.067 in (1)
  • 0.069 in (1)
  • 0.077 in (1)
  • 0.079 in (1)
  • 0.088 in (1)
  • 0.089 in (1)
  • 0.095 in (1)
  • 0.098 in (1)
  • 0.108 in (1)
  • 0.119 in (1)
  • 0.125 in (1)
  • 0.126 in (1)
  • 0.128 in (1)
  • 0.129 in (1)
  • 0.138 in (1)
  • 0.15 in (1)
  • 0.152 in (1)
Cutting Width Min to Cutting Width Max
Cutting Width
Cutting Width
  • 0.5 mm (1)
  • 0.775 mm (1)
  • 0.8 mm (1)
  • 0.9 mm (1)
  • 1.0 mm (1)
  • 1.05 mm (1)
  • 1.201 mm (1)
  • 1.401 mm (1)
  • 1.475 mm (1)
  • 1.5 mm (1)
  • 1.576 mm (1)
  • 1.701 mm (1)
  • 1.75 mm (1)
  • 1.951 mm (1)
  • 2.0 mm (1)
  • 2.2 mm (1)
  • 2.225 mm (1)
  • 2.25 mm (1)
  • 2.401 mm (1)
  • 2.5 mm (1)
  • 2.75 mm (1)
  • 3.0 mm (1)
  • 3.176 mm (1)
  • 3.2 mm (1)
  • 3.25 mm (1)
  • 3.276 mm (1)
  • 3.5 mm (1)
  • 3.801 mm (1)
  • 3.85 mm (1)
Cutting Width Min to Cutting Width Max
insertGeometry
Cutting Tool Material
Cutting Tool Material
  • H T (1)
  • H W (1)
No filters matching ""
View Products in
Metric
Inch

ORIGINAL PRODUCT

  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Shank - KM-TS ISO 26622Shank - KM-TS ISO 26622
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
  • Coolant - Through Coolant 100 bar (1500 psi) MaximumCoolant - Through Coolant 100 bar (1500 psi) Maximum
View Products
SAP Material Number ISO Catalog Number ANSI Catalog Number [DM] Minimum Bore Diameter [DM] Minimum Bore Diameter [F] F Dimension [F] F Dimension [L4] Maximum Boring Depth [L4] Maximum Boring Depth [L1] Tool Length [L1] Tool Length Gage Insert
1020727 KM32TSS12DNER2 KM32TSS12DNER2 18.5000 .7283 11.0000 .4331 42.0000 1.654 60.0000 2.362 NG2L
    List price:
    $399.69 /each.
    Your price::
    Qty
    List price:
    Discount: %
    Your price::
    Replacement This item is no longer available
    Replacement Product Please contact customer service for assistance
    Qty

    Sold in pkg. of

    product-image
    Please adjust the following properties from

    ISO Catalog Number

    ANSI Catalog Number

    to find similar products.
    You are about to create a duplicate . Do you want to proceed?
    You are about to delete Do you want to proceed?
    What would you like to rename your to?
    Please enter a valid name
    Please enter a name for the duplicate
    Please enter a valid name
    You are about to add to your My Solutions page. Do you want to proceed?
    Please enter a valid name
    Send a copy of

    Please enter a valid Email
    Please enter a valid name

    The following CAD files are available

    Please select a file to download

    You should be logged to see your dashboard information
    Session expired due to inactivity, please login again
    The product/s () you were trying to add to the cart is/are not available, please contact customer service.
    item(s) successfully added to the cart
    View Cart